Rocks World - RRR
i-rocks.com
i-rocks.com.tw/uploads/root/IRK103R.JPG
Installation Guide for irocks models including: IRK103R, DG103R, K103R Rechargeable Wireless Mechanical Keyboard, K103R, Rechargeable Wireless Mechanical Keyboard, Wireless Mechanical Keyboard, Mechanical Keyboard, Keyboard
I-Rocks Technology Co., Ltd. DG103R UJ9DG103R UJ9DG103R dg103r
I-Rocks Technology Co., Ltd. IRK103R wireless mechanical keyboard UJ9IRK103R UJ9IRK103R irk103r
File Info : application/pdf, 24 Pages, 2.56MB
DocumentDocumentK103R
Rechargeable Wireless Mechanical Keyboard
Model No.IRK103R
Quick Installation Guide
:
Rechargeable Wireless Mechanical Keyboard US 1-1
PACKAGE CONTENTS
Keyboard x 1 USB Dongle USB-C Cable x 1 Puller for Switch & Keycap x 1 Extra Switches x 4 Quick Installation Guide x 1
SYSTEMS REQUIREMENTS
Microsoft Windows® 10. Windows® 11 and above macOS 10.14 and above Available USB Port
FEATURES
Gasket structure and multi-layer sound-dampening structure providing a soft and unified c ctyping experience iRocks pre-lubed switches and hot-swappable switch sockets Compatible with Windows and macOS operating systems Wheel with switchable modes, customizable in Windows 10 and 11 for volume control, scrolling, czooming, and more Supports Bluetooth, 2.4GHz wireless and USB-C wired connectivity Vibrant RGB backlighting with static or dynamic effects
KEYBOARD SPECIFICATIONS
Interface : Wired (USB Full Speed ) cWireless (2.4GHz & Bluetooth 5.2) Key number : 81 Keys Switch type : Mechanical switch with hotswap sockets N-Key rollover ( NKRO) Multimedia keys: 12keys Backlight effective keys : 4 keys Voltage : DC 5V ,500mA
Rechargeable Wireless Mechanical Keyboard US 1-2
Charging interface : USB C Rechargeable li-ion battery : 3750 mAh Cable length : approx. 180 cm Weight : approx. 810 g Dimension : 331 (L) X 144(W) X 44(H) mm
RECEIVER SPECIFICATIONS
Interface: USB Dimension: 18.6(L) X 14.5(W) X 6.1 (H) mm
HARDWARE INSTALLATION
First-time Use and Charging Instructions When the red light flashes, the battery is low and needs charging. The light will stay solid red while charging and turn off when fully charged. For the initial use or if the keyboard has been unused for an extended period, it is important to charge the battery to ensure proper keyboard and battery functionality. Prolonged periods of non-use can gradually reduce battery voltage. Therefore, it is recommended to fully charge the battery every few months (approximately 4-5 months) before use to extend battery lifespan.
Charging Method Please do not use a fast charger to charge this product to avoid potential damage. 1. Connect the USB cable to your computer or a USB DC5V charger. 2. Plug the other end into the keyboard for charging. 3. Charging is completed when the screen on your keyboard indicates 99% ~ 100% battery
level. Note: It is advisable to turn off the backlight function during charging to shorten charging time.
Keyboard linking This keyboard has three connection modes wiredewireless and Bluetooth. Follow the steps
below to set up your keyboard.
Bluetooth Wired / OFF 2.4G Wireless
Windows® OS
Mac OS
Rechargeable Wireless Mechanical Keyboard US 1-3
hWired Connection 1. Flip the connection switch to " OFF " for wired mode 2. Turn on your computer and plug USB cable into an available USB port on your computer and keyboard. 3. Your computer will automatically detect the keyboard 4. You may use the keyboard after detection 5. When your keyboard is not in use, switching to Off/wired mode ( connection switch OFF ) is recommended. 6. Switch the keyboard to specific mode depending on your system ( Windows® or macOS )
hRF2.4G Wireless Connection The device is pre-paired at the factory, so users do not need to pair it. The connection method is as follows : 1. Power on the computer and plug USB receiver into a USB port on your computer. 2. Flip the connection switch to 2.4G for 2.4 Ghz wireless mode 3. Your computer will automatically detect the receiver and connect with the keyboard 4. Switch the keyboard to specific mode depending on your system ( Windows® or macOS )
hBluetooth Connection Before using keyboard via Bluetooth connection for the first time, you need to pair it with your PC and use FN + Q (W/E) to connect and switch between 3 different Bluetooth devices. 1. Flip the connection switch to BT for Bluetooth mode 2. Press and hold Fn+Q (W/E) for 3 seconds to enter pairing mode and the key will blink rapidly and is discoverable by your PC 3. Navigate to Bluetooth settings on your PC and add Bluetooth device. Look for device labeled "K103R Keyboard" and pair it with your PC. 4. Switch the keyboard to specific mode depending on your system (Windows® or macOS )
hKeyboard sleep mode settings 1. Under wireless mode, the backlight of your keyboard will be automatically turned off after 1.5 minute of keyboard inactivity. To turn backlight back on, press any key. To set idle timeout for keyboard's Energy Saving Mode under wireless mode FN + CTRL + 0 : Fully disable Energy Saving Mode FN + CTRL + 1 : 1.5 minutes (default, key 1 will blink 3 times when enabled) FN + CTRL + 2 : 5 minutes (key 2 will blink 3 times when enabled) FN + CTRL + 3 : 10 minutes (key 3 will blink 3 times when enabled)
Rechargeable Wireless Mechanical Keyboard US 1-4
2. Under wireed mode, Press FN+Ctrl+S to enable or disable Energy Saving Mode. When the mode is enabled, backlight of your keyboard will automatically be turned off after 5 minutes of keyboard inactivity and turned back on after pressing any key. Energy Saving Mode in wired mode is disabled by default.
hHot-swappable Switch Replacement KEYCAP PULLER
MX SWITCH PULLER
Step 01
Remove the keycap with key puller side of 2-in-1 tool coming with your keyboard.
Step 02
Remove the switch with switch puller side of the tool.
Rechargeable Wireless Mechanical Keyboard US 1-5
Step 03
Gently push in replacement switch
90°
- make sure the pins of the switch are aligned with the pin holes before pushing it in.
Push from the top of the switch
Pin Holes
to avoid pin damage, do not push on the side of the switch.
Step 04
Push back the keycap.
Still can't use
Visit iRocks official website for tutorial video.
PRODUCT INFORMATION
hLED Indicator : Caps Lock Indicator : Windows lock : Power low Indicator
Backlight with only Esc key on: The keyboard is full key locked. Press Fn+Esc to lock or unlock.
Rechargeable Wireless Mechanical Keyboard US 1-6
hFunction Keys Press and hold `Fn' key, then press desired function key to use hotkeys.
1. Setting Hotkeys
FN + CTRL + G : N-Key Rollover anti-ghosting function (default) FN + CTRL + N : 6-Key Rollover anti-ghosting & standard USB settings FN + CTRL + P : Factory reset ( Press and hold for 5 seconds)
2. Multimedia & Function Hotkeys
FN + Esc : Lock entire keyboard (Only the ESC key is red backlit when keyboard is locked.)
KEY
F1 F2 F3 F4 F5 F6
Windows® F7
F8 F9 F10 F11 F12 Win
PRESS
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Win
FN + PRESS
Show Desktop Lock PC Search for files or folder Launch Calculator Open my Computer Open E-Mail Open the internet browser Media player Play/pause Backward Stop play Forward Turn Windows lock on or off
Rechargeable Wireless Mechanical Keyboard US 1-7
KEY PRESS
FN + PRESS
F1
Decrease Screen Brightness F1
F2
Increase Screen Brightness F2
F3
Mission Control
F3
F4
Spotlight
F4
F5
Search
F5
mac OS F6
No function
F6
F7
Previous Track
F7
F8
Play / Pause
F8
F9
Next Track
F9
F10
Mute
F10
F11
Volume Down
F11
F12
Volume Up
F12
3. Keyboard Backlight
FN + · or À FN + or FN + CTRL + FN + CTRL +
: Adjust brightness backlight (4 levels) : Adjust backlight effect speed (depending on backlight effects) : Adjust backlight color (depending on backlight effects) : Show the custom backlighting for software lighting effects mode
PRESS THE KEY :Wheel - Volume Control Mode FN + THE KEY : Turn off the backlight
PRESS THE KEY : Wheel Smart Wheel Mode FN + THE KEY : Exchange backlight effects
Rechargeable Wireless Mechanical Keyboard US 1-8
4. Smart wheel function Use the scroll wheel and the two buttons next to it to switch between two scroll wheel functions (volume control/smart scroll). The introduction is as follows :
: Wheel - Volume Control Mode Wheel clockwise : Increase volume Wheel counterclockwise : Decrease volume Wheel button : Mute / Unmute
: Wheel Smart Wheel Mode Only works on PC with Windows®10/11 Go to Windows®10/11 Settings -> Devices -> Wheel for customization
Rechargeable Wireless Mechanical Keyboard US 1-9
SOFTWARE
The keyboard software requires the keyboard to be in wired mode, as it directly saves most of settings to the keyboard's onboard memory. Saved keyboard settings will be applied under both wired and wireless mode. Please visit iRocks official website to download and install latest software for backlight, macro, multimedia keys configuration and more. 1. Double click the installation software
downloaded from iRocks, and follow the instructions. 2. Plug in the keyboard after installation, the software will start to identify your keyboard. 3. Launch the software. It will take some time to synchronize the memory parameter and setting of the keyboard. Attention : The keyboard has to be switched to wired mode for software configuration.
Rechargeable Wireless Mechanical Keyboard US 1-10
TROUBLESHOOTING & CAUTIONS
If your wireless keyboard does not work normally :
hEnsure the keyboard is switched to the correct mode - wired BT or 2.4GHz wireless mode. hCheck the USB receiver is connected to your computer's USB port correctly unplug and plug it back. hCheck if the keyboard has sufficient battery power. hMetal objects close to or in between the keyboard may reduce wireless performance.
Try moving metal objects away from the keyboard hThis keyboard has 2.4GHz wireless connection, using USB 3.x and 2.4GHz wireless devices at
the same time may cause radio frequency interference and affect normal functionality of the wireless device. Try to reduce radio interference of the USB 3.x device to your wireless keyboard, Plug the receiver into the USB 2.0 port or other locations as far away as possible from the USB 3.x port or use USB hub / USB extension cable to re-position your wireless receiver to a location away from the USB 3.x port. hFor saving power, the keyboard goes into sleep mode when it's not in use for a while. Press any key and wait for 1 to 3 seconds to bring the keyboard out of sleep mode. hWhen not using the keyboard for an extended period, please switch off the keyboard and charge it periodically. Avoid letting the battery remain at low voltage for too long to ensure the battery's proper operation and extend its lifespan. hAvoid putting your keyboard under high moisture condition or direct sun. hDo not expose your keyboard to extreme temperatures, heat, fire or liquid.
WIRELESS ID PAIRING
The 2.4G wireless keyboard is pre-paired with included receiver before shipment. It saves the need to pair and is ready to use out of the box. When you need to re-pair your keyboard and receiver manually to prevent signal interference or other issues, Please follow the steps below :
1. Make sure the keyboard is in wireless mode. 2. Press and hold Fn + P for 3 seconds to enter pairing mode ( P key will flash ). 3. Unplug and plug the USB receiver back into your computer's USB port. 4. Move the keyboard to close the USB receiver within 15cm, the ID setting process will start
automatically. (It will take about 4~8 seconds) 5. Your keyboard should be ready to use 6. The above steps need to be completed within 1 minute, If the keyboard doesn't work properly,
please remove the USB receiver from computer's USB port, then proceed to step 2~4 again.
Rechargeable Wireless Mechanical Keyboard US 1-11
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : hReorient or relocate the receiving antenna. hIncrease the separation between the equipment and receiver. hConnect the equipment into an outlet on a circuit different from that to which the receiver cis connected. hConsult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
( 1 ) This device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Rechargeable Wireless Mechanical Keyboard CH 1-1
x 1 (IRK103R) 2.4GHzx 1 (DG103R) USB-C x 1 x 1 X 4 x1
Windows® 8.1, Windows® 10, Windows® 11. Mac OS 10.14 USB
Gasket iRocks Windows®1011 Windows macOS /2.4G / USB-C RGB
: : IRK103R : (USB) & (2.4GHz & 5.2) : 81 : (NKRO) : 12 : 4 : DC 5V ,500mA
Rechargeable Wireless Mechanical Keyboard CH 1-2
: USB- C : 3750 mAh USB : 180 : 810 g : 331 (L) X 144(W) X 44(H) mm
: USB : 18.8(L) X 14.5(W) X 6.3 (H) mm
(4~5) c1. USBUSB DC5V c2. c3. : c2.4Ghz
2.4G
Windows
Mac
Rechargeable Wireless Mechanical Keyboard CH 1-3
h 1. /OFF 2. 3. USBUSB Type A USB Type C 4. 5. 6. (Windows®macOS) h2.4G : 1. USBUSB 2. 2.4G 3. 4. 5. (Windows®macOS) h c FN+Q (W/E) 3 1. 2. FNQ (W/E)3Q(W/E) 3. , " K103R Keyboard" 4. 5. (Windows®macOS) h 1.2.4G () : cFN+CTRL+0 : (03) cFN+CTRL+1 : 1.5 ( , 13) cFN+CTRL+2 : 5(23) cFN+CTRL+3 : 10 (33)
Rechargeable Wireless Mechanical Keyboard CH 1-4
2. FN+CTRL+S ( / S2) : (S3) : 5 h
Step 01
Step 02
Rechargeable Wireless Mechanical Keyboard CH 1-5
Step 03
90°
Pin Holes
Step 04
?
iRocks
hLED : : Win :
ESC, ( Fn+ESC )
Rechargeable Wireless Mechanical Keyboard CH 1-6
h FN
1.
FN + CTRL + G : N-Key Rollover ( ) FN + CTRL + N : 6-Key Rollover USB FN + CTRL + P 5 :
c2. FN + Esc : ( ESC )
F1 F2 F3 F4 F5 F6
Windows® F7
F8 F9 F10 F11 F12 Win
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Win
FN +
-Mail / Windows/Application
Rechargeable Wireless Mechanical Keyboard CH 1-7
F1
F2
FN +
F1 F2
F3
Mission Control
F3
F4 F5
mac OS F6
F7 F8 F9 F10 F11 F12 3.
Spotlight
F4
F5
F6
F7
/
F8
F9
/
F10
F11
F12
FN + · or À FN + or FN + CTRL + FN + CTRL +
: () : () : () :
: FN + :
: FN + :
Rechargeable Wireless Mechanical Keyboard CH 1-8
4. 2(/)
: : : : : : () Windows® 10/11 Windows®10 > > Windows®11 > >
Rechargeable Wireless Mechanical Keyboard CH 1-9
iRocks 1.
2.
3.
:
Rechargeable Wireless Mechanical Keyboard CH 1-10
: h2.4G h h h h2.4GHzUSB3.X Hub Wifi USB2.0USB c/USB h h h h
ID
ID USB ID ID c1. 2.4G c2. FN + P 3 (P) c3. USB c4. USB15 ID ID4~8 c5. ID c6.1USB USB1 4
Rechargeable Wireless Mechanical Keyboard CH 1-11
hIRK103R : https://www.i-rocks.com.tw/uploads/root/IRK103R.JPG
NCC
20241017
i-Rocks Technology Co., Ltd. Headquarter Office
7F., No. 786, Zhongzheng Rd., Zhonghe Dist., New Taipei City 23586, Taiwan Tel : +886-2-2225-5080 Fax : +886-2-2228-1712 www.i-rocks.com i-Rocks Korea www.i-rocks.co.kr i-Rocks Malaysia 57-A, Jalan SS21/1A, Damansara Utama, 47400, Petaling Jaya, Selangor, Malaysia Tel : +603-77339233 www.i-rocks.com
IRK103R