Installation Guide for SAMSUNG models including: Samsung Magician 7 Software, Samsung Magician 7, Software


Samsung Magician 7

Installation Guide. SAMSUNG PROPRIETARY. Revision 1.0. 3. 1. Introduction. New Samsung Magician 7. Experience the new user-friendly GUI of ...

Trademarks & service marks

3) When performing Short scan, secure sufficient space of 5GB or more. 4) Samsung NVMe driver v3.3 is required to use SMART Self-test in 970 EVO Plus View

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 14 Pages, 509.92KB

Samsung Magician 7 0 1 Installation Guide v1.1
Installation Guide
S amsung Magician 7


The software included in this product contains copyrighted software that is licensed under the GNU Lesser General License (LGPL), BSD, OpenSSL and MIT.

Below is the list of components covered under LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to: [email protected]

If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of
Installation Guide physically performing source distribution may be charged. This offer is valid to anyone in receipt of this information.

ReviCsoiomnp1o.1nent Judy Array

License LGPL 2.1

Products and specifications discussed herein are for reference purposes only. All information discussed herein may change without notice and is provided on an "AS IS" basis, without warranties of any kind. This document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppels or otherwise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your nearest Samsung office. All brand names, trademarks and registered trademarks belong to their respective owners.

This material is copyrighted by Samsung Electronics. Any unauthorized reproductions, use or disclosure of this material, or any part thereof, is strictly prohibited and is a violation under copyright law.
The Samsung Logo is the trademark of Samsung Electronics. Adobe is a trademark and Adobe Acrobat is a registered trademark of Adobe Systems Incorporated. All other company and product names may be trademarks of the respective companies with which they are associated.
For more information, please visit

Revision 1.0 1

Installation Guide
Revision History
Revision Number
1.0 1.1

Initial Release Bug fix, Security improvement

Revision Date Sep 2021 Dec 2021

Revision 1.0 2

Installation Guide
1. Introduction
New Samsung Magician 7


Experience the new user-friendly GUI of Samsung Magician. Try our new features and enhanced functions for better user experience. Samsung Magician provides an integrated convenient solution for SSD with advanced capabilities.

Samsung Magician software is developed and distributed exclusively for users of Samsung Solid Sate Drives (SSDs).

New Features
New Samsung Magician features a number of improvements over the previous versions.
- New features include:  Security Setting  added for managing Samsung Portable SSD.  Help Center  added for your convenience in using Samsung Magician.  Chatbot  added for helping you with solving a question about Samsung Magician.

Revision 1.0 3

Installation Guide
2. Requirements and Support
System Requirements
Component Operating System
Disk Capacity Supported Partition Types
Supported Languages

Requirements Windows 7 (32/64bit) Windows 8 & 8.1 (32/64bit) Windows 10 (32/64bit)
Minimum 400MB available for installation
English, Korean, Spanish, German, Japanese, Chinese(Simplified), French, Italian, Portuguese, Russian
The following Samsung SSDs are supported*: Samsung SSD 980 PRO with Heatsink(M.2) Samsung SSD 980 (M.2) Samsung SSD 980 PRO (M.2) Samsung SSD 970 PRO (M.2) Samsung SSD 970 EVO (M.2) Samsung SSD 970 EVO Plus (M.2) Samsung SSD 960 PRO (M.2) Samsung SSD 960 EVO (M.2) Samsung SSD 950 PRO (M.2) Samsung SSD 870 QVO Samsung SSD 870 EVO Samsung SSD 860 PRO Samsung SSD 860 EVO (2.5", mSATA, M.2) Samsung SSD 860 QVO Samsung SSD 850 PRO Samsung SSD 850 Samsung SSD 850 EVO (2.5", mSATA, M.2) Samsung SSD 840 PRO Samsung SSD 840 EVO (2.5", mSATA) Samsung SSD 840 Series Samsung SSD 830 Series Samsung SSD 750 EVO Samsung Portable SSD Series

Supported Features by model
There are some limitations that exist depending on the type of storage and model.

Revision 1.0 4

Installation Guide


Model 840 PRO

Drive Info.


Perfor mance Bench mark


Perfor mance Optimi zation (TRIM)


Diagno stic Scan

PSID Revert

Encrypte d Drive

Over provisio

Secure Erase

Security Setting


840 EVO 

750 EVO 

850 PRO 

850 EVO 

950 PRO 

960 PRO 

960 EVO 


860 PRO 

860 EVO 

970 PRO 

970 EVO 

860 QVO 

970 EVO Plus

870 EVO 

870 QVO 


980 PRO 

980 PRO



Samsung PSSD T1

Samsung PSSD T3








Revision 1.0



Installation Guide







Revision 1.0 6

Installation Guide
RAPID mode Requirements
Component Operating System
Processor System memory(DRAM)
Free Disk Space File System

Requirements Windows 7 (32/64bit) Windows 8 & 8.1 (32/64bit) Windows 10 (32/64bit)
Samsung SSD 870 EVO Samsung SSD 870 QVO Samsung SSD 860 PRO Samsung SSD 860 EVO (2.5", mSATA, M.2) Samsung SSD 860 QVO Samsung SSD 850 PRO Samsung SSD 850 EVO (2.5", mSATA, M.2),
Samsung SSD 850 Samsung SSD 840 PRO Samsung SSD 840 EVO (2.5", mSATA), Samsung SSD 750 EVO
1GHz or faster
2GB RAM or more
Minimum 50MB

Driver Support
1) SATA Chipset Intel

Microsoft Intel Microsoft AMD NVIDIA


Supported Yes Yes Yes Yes(With Latest Driver) Yes

2) NVMe







1) Samsung Magician does not require internet connection to run. However, the internet connection is required to get updates for the latest Firmware, Feature modules or application and to authenticate the SSDs.
Revision 1.0

Installation Guide


2) If you delete some files of New Samsung Magician without internet connection, some features like certification or configuration may not work properly and cause limitations in use of New Samsung Magician.
3) The SSD should not be disconnected from the system while FW Update, Benchmarking, Secure Erase, Over Provisioning, Data Security, PSID Revert, Diagnostic scan, Performance Optimization or RAPID features are in progress. Doing so could result in data corruption.
4) All parallel operations should be terminated before executing Diagnostic scan, Performance Optimization or Benchmarking features.
5) Data corruption may result if the user terminates the Magician application abnormally while Benchmarking, FW Update, Secure Erase, Diagnostic scan, Over Provisioning, Data Security, PSID Revert or RAPID features are in progress.
6) There is always the risk of data loss when updating SSD firmware. It is imperative that the user back up any important data before performing a firmware update.
7) If there are some system issues for Magician to perform functions, System Compatibility in Information tab will provide guide to fix the issues.
8) If Samsung Magician is under a proxy network environment, it may not provide the full functionality such as firmware update.
9) In order for Samsung Magician to function properly, the time of the PC needs to be correctly set.

Revision 1.0 8

Installation Guide
3. General Limitations


1) Magician does not work with SSDs connected via the SCSI controller interface. 2) Only MBR and GPT partition types are supported. Magician may not work with other partition
types. 3) Magician shows only volumes mounted with letter. 4) Magician will not work on SSDs that are locked with a user password. 5) The user may need to manually refresh for Magician to accurately reflect all connected/removed
disks. 6) RAID on mode in SATA configuration is not supported by Samsung Magician and USB bootable
solution. 7) If you are using any custom storage driver, then Magician may not work properly. Please always
use the latest storage driver or Microsoft driver. 8) In Windows 7, the Samsung NVMe Driver is required for Magician to fully support Samsung's NVMe
device. 9) In Windows 7, the GUI of the Samsung Magician application may not seem normal intermittently. 10) In the case of the function where the progress time is displayed  Performance benchmark,
Diagnostic scan, and Performance optimization, changing the system time during the function execution may cause the elapsed time to not appear normally. 11) Magician is signed using SHA-2 to provide a safer service. Windows updates or patches may be required to use Magician in Windows 7. 12) Depending on the resolution or ratio setting of your display, bottom and right side of Samsung Magician may be out of screen. 13) For the performance benchmark record that was performed in the previous version of Magician 7.0, some values may be marked as Unknown. 14) Magician may have compatibility issues with a particular IRST VMD Driver. 15) When RAPID is activated, Restore point warning message is only available in English. 16) If Magician gets connected to or disconnected from the PSSD while performing some feature, Magician may not work properly. 17) If you try changing the name of security enabled PSSD T1 / T3, the name won't be changed without additional guidance when the wrong password is entered. 18) For Windows 8.1, update is required in order of KB2919442, KB2919355, and KB2999226. 19) For Windows 8.1 with update, KB2999226 update is required.

Performance Benchmark
1) Benchmarking may not work with some removable storage devices. 2) Performance Benchmark may get timed-out on ASMedia controllers if the driver does not handle
multi thread operations (IOs)
Revision 1.0 9

Installation Guide
Performance Optimization


1) Performance Optimization supports only the NTFS file system. 2) Magician does not support TRIM operation for Standard Performance Optimization on
Windows 8 and above, as they support native TRIM.

Diagnostic Scan

1) Short scan supports only the NTFS file system. 2) If the device is locked, both short scan and full scan are not supported. 3) When performing Short scan, secure sufficient space of 5GB or more. 4) Samsung NVMe driver v3.3 is required to use SMART Self-test in 970 EVO Plus. In case of 980, 980
PRO, 980 PRO with Heatsink NVMe driver is not required for it.

PSID Revert
1) SSD supporting PSID Revert is 860 EVO 860 EVO M.2, 860 EVO MSATA, 860 PRO, 860 QVO, 970 EVO Plus, 870 QVO, 870 EVO, 980, 980 PRO, 980 PRO with Heatsink, PSSD T7, PSSD T7 Touch, PSSD T7 Shield.
2) The PSID Revert function can release the encrypted drive using the PSID of the label. After performing PSID Revert, all data on the drive is deleted.

Secure Erase & Linux Bootable Solution
1) While making a bootable solution for Secure Erase, please make sure the Device Manager window is closed.
2) In some of the PCs, Bootable Solution may not work properly as expected because of compatibility issue.
3) The Bootable solution is not compatible with pure SCSI or SATA NVIDIA/LSI/AMD chipset drivers. 4) AHCI or ATA mode must be enabled in the BIOS during PC boot up. 5) The Bootable solution may hang if the SSD is removed on PCs that do not support the hot plug
feature (e.g. ICH5/6 chipsets). 6) The Bootable solution will not work with devices attached via SATA 6Gbps (SATA III) operating in
IDE mode. 7) Secure Erase may not work on systems where SECURITY FREEZE LOCK is issued by the BIOS. 8) The keyboard input of the bootable solution requires to be connected to USB 2.0 and below.

Revision 1.0 10

Installation Guide
Encrypted Drive


1) Class 0, TCG Opal and Encrypted Drive cannot be enabled simultaneously. Only one mode can be enabled at a time and all other modes must be disabled.
2) Security mode (Class 0, TCG/Opal or Encrypted Drive) must be disabled (unlocked) before removing and installing onto another PC.

Over Provisioning
1) Over Provisioning only supports NTFS and raw (Unformatted) partitions. 2) Over Provisioning does not support dynamic disks or disks that require `Chkdsk' operation. 3) Magician cannot guarantee that Over Provisioning scans disk's partition layout properly, if
partition information had been changed during scanning. 4) Over Provisioning may fail, even though enough free space is available, if your system suffers from
cluster misalignment. 5) If user cannot span or shrink volume size through disk management of OS administration tool, it is
possible not to work dynamic over-provisioning properly. 6) Windows `Disk Partition Service' and `Virtual disk Service' should not be disabled in order to
perform Over Provisioning. 7) Over Provisioning can only be performed on the last accessible partition (NTFS or raw) 8) If a device with more than 4TB applied to the MBR partition is used, the function may not operate

Security Setting
1) Finding my password is unavailable on Samsung Magician. 2) Up to four fingerprints can be registered on Samsung Magician.

Firmware Update
1) PC will be shut down automatically after firmware update (Magician counts down 20 seconds before shutdown).
2) Firmware Update may fail on Samsung brand SSDs connected to AMD Controller. Please retry using default SATA AHCI controller (Microsoft drivers).

1) When booting the PC, users can decide whether to auto run Samsung Magician. If auto run is turned off, updates cannot be received in real time.
2) The device scan proceeds immediately after the language is changed. 3) Scaling size varies depending on the resolution.
4. RAPID mode Limitations
Revision 1.0 11

Installation Guide


1) RAPID mode accelerates only one SSD even though user has several Samsung SSDs (870 QVO, 870 EVO, 860 QVO, 860 EVO, 860 PRO, 850 PRO, 850 EVO, 850, 750 EVO, 840 EVO, and 840 PRO regardless of form factor).
2) If there are two identical SSDs connected, RAPID mode may accelerate the incorrect SSD. 3) RAID Mode sets is not supported as an accelerated drive. 4) After uninstalling RAPID mode, if the system is restored to a prior state in which RAPID mode was
installed, RAPID mode will be started in a disabled state. 5) NVIDIA Storage controller is not supported. 6) During RAPID mode Enable/Disable operation: Do not disconnect the target SSD, Do not kill the
application. 7) If fast startup is enabled on windows 8, 8.1 and 10 machines, RAPID mode enable/disable requires
system restart. Shutdown followed by turning-on the power will not activate RAPID mode enable/disable. By default fast startup is enabled. 8) Flush command of operating system and/or application may cause variation in performance when RAPID mode is enabled. 9) Sometimes on AMD PC with AMD and ASMedia storage controllers it was found that the IOs takes a longer time to complete. In such cases if Rapid was enabled, it may get automatically disabled due to such IO errors. It may display "Rapid is in inactive state". User has to reboot the PC to enable the Rapid back. 10) If multiple iterations of Read and Write are performed, RAPID mode may become inactive due to system internal errors on some of the AMD / ASMedia Controller or Driver. 11) RAPID mode can't be guaranteed on the target SSD with non-NTFS file system. 12) If user deletes some files on RAPID folder, RAPID may not be uninstalled properly. 13) If the msiexec.exe is either unstable or corrupted, RAPID mode enable fails with the error message "The Windows Installer service failed to start. Start the Windows Installer service manually, upgrade the Windows Installer service, and check if the last updated or installed program in Windows was successful. If the problem persists, contact the A/S center."

The issue can be fixed by:
- Unregister and reregister Windows Installer service / MSI service.  On the Start menu, click Run.  In the Open box, type "msiexec /unreg". And then press ENTER.  On the Start menu, click Run  In the Open box, type "msiexec /regserver". And then press ENTER.  Try enabling RAPID mode again. If RAPID mode does not enable, follow the steps below.
- Updating Windows Installer  If your Windows Installer is not the latest version, corrupted or msiexec is missing, please install the latest version of Windows Installer, then try enabling RAPID mode again.
- If none of the above procedures work, we recommend reinstalling Windows.

Revision 1.0 12

Installation Guide
Operational Check of RAPID mode


RAPID mode starts its operation 45 seconds after OS booting. Please make sure the increased size of non-paged pool using "task manager  performance  memory tab" to ensure it is fully operational.

* Before RAPID mode enabling

* After RAPID mode enabling

Revision 1.0 13

Installation Guide


Revision 1.0

Dec 2021 Design and contents of this manual are subject to change without notice. 2021 Samsung Electronics, Co., Ltd. All rights reserved.

Microsoft Word 2016 Microsoft Word 2016