Installer Guide
Danfoss Pressure Transmitters and Electronic Pressure Switches
Pressure Transmitters MBS 1200 / MBS 1250
Pressure transmitters with pressure and temperature output MBS 1300 / MBS 1350
Electrical Connection Types:
M12 × 1 EN60947-5-2
Circular connector with 4 pins. The diagram shows a keyway at the top. Pin 1 is located at the top, Pin 2 to the right of Pin 1, Pin 3 at the bottom, and Pin 4 to the left of Pin 1.
Round Packard Metri-Pack
Rectangular connector with 3 pins. Pins are labeled A, B, and C. (Note: For MBS 1300 / MBS 1350).
Deutsch DT04-4P
Rectangular connector with 4 pins. Pins are numbered 1, 2, 3, and 4.
Deutsch DT04-3P
Rectangular connector with 3 pins. Pins are labeled A, B, and C. (Note: For MBS 1300 / MBS 1350).
EN 175301-803-C Industrial Standard
Rectangular connector with 4 pins. Pins are numbered 1, 2, 3, and 4.
AMP Superseal 1.5
Oval connector with 3 pins. Pins are numbered 1, 2, and 3. (Note: For MBS 1300 / MBS 1350).
Electronic Pressure Switch MEP 2200 / MEP 2250
Electronic pressure switch MEP 2600 / MEP 2650
Electrical Connection Types:
M12 × 1 EN60947-5-2
Circular connector with 4 pins. The diagram shows a keyway at the top. Pin 1 is located at the top, Pin 2 to the right of Pin 1, Pin 3 at the bottom, and Pin 4 to the left of Pin 1.
Deutsch DT04-4P
Rectangular connector with 4 pins. Pins are numbered 1, 2, 3, and 4.
EN 175301-803-C Industrial Standard
Rectangular connector with 4 pins. Pins are numbered 1, 2, 3, and 4.
Deutsch DT04-3P
Rectangular connector with 3 pins. Pins are labeled A, B, and C.
