About This Guide
This guide provides detailed instructions for mounting your Everbilt House Number 7. It is designed to help you achieve a professional finish, whether you prefer a flush or elevated installation.
Mounting Options
The Everbilt House Number 7 can be mounted in two ways:
- Elevated: For a raised, dimensional look.
- Flush: For a sleek, flat appearance against the surface.
Installation Steps
Elevated Mounting
- Determine the desired location and use the template to mark screw locations.
- Drill holes for anchors using a 7/32 in drill bit.
- Install anchors.
- Insert the threaded rod end into the number.
- Slide spacers onto the rod.
- Align screws with anchors and press into place using a rubber mallet.
Flush Mounting
- Determine the desired location and use the template to mark screw locations.
- Drill holes for anchors using a 7/32 in drill bit.
- Install anchors.
- Insert the threaded rod end into the number.
- Align screws with anchors and press into place using a rubber mallet.
Product Information
This mounting template is for the Everbilt House Number 7, a versatile decorative element for displaying your address.
