ANENG PN200 Multifunctional Clamp Ammeter
Introduction
The ANENG PN200 is a versatile and multifunctional clamp ammeter designed for measuring AC and DC current, voltage, resistance, capacitance, and frequency. It features auto power off, a bright backlight screen, and non-contact voltage (NCV) detection, making it a reliable tool for electrical testing and diagnostics.
Key Features
- Multifunctional Measurement: AC/DC current, AC/DC voltage, resistance, capacitance, frequency, diode test, buzzer, and NCV detection.
- AC and DC Current Measurement: Capable of measuring both AC and DC current.
- Auto Power Off: Automatically shuts down after approximately 15 minutes of inactivity to conserve battery ⚙️.
- Backlight Bright Screen: Ensures clear visibility in dark environments ?.
- Data Retention (Hold): Allows users to hold the measured value on the screen ?.
- NCV Voltage Sensing: Detects AC voltage without contact [contactless].
- Jaw Opening: 30mm (1.18 inches) for clamping around wires.
- Power Source: Powered by two AAA batteries.
- Safety Rating: CAT IV 600V.
Functions and Usage
AC/DC Current Measurement
Measure AC and DC current by clamping the jaw around a single conductor. For AC current, clamp the wire in the center of the jaw for accurate readings. For DC current, clamp the single-stranded wire.
AC/DC Voltage Measurement
Measure AC voltage (e.g., 220V) or DC voltage by connecting the test leads to the circuit or battery terminals.
Resistance Measurement
Measure resistance by touching the two ends of the component with the test leads.
Capacitance Measurement
Measure capacitance by switching to the capacitor gear and connecting the test leads to the capacitor. Ensure the capacitor is discharged before measurement.
Frequency Measurement
Measure frequency by contacting the AC voltage with the watch pen (test probe) in the Hz frequency gear.
Diode Test
Test diodes by connecting the test leads to the positive and negative electrodes of the diode in the diode gear [diode-test].
Buzzer Function
Detect fuses or continuity by switching to the buzzer gear ?. A beep indicates an unobstructed path or continuity.
NCV Voltage Sensing
Detect AC voltage without contact. When AC voltage is sensed, the LED red light flashes and an alarm beep sounds. The closer the voltage, the stronger the signal.
Screen Backlight
The screen features a backlight for clear visibility in dark environments ?. Long press the function switch key to turn the backlight on/off; a single press can hold the data ?.
Product Specifications
| Function | Range | Resolution | Precision |
|---|---|---|---|
| AC voltage | 0V-600V | 1mV-1V | ± (2.0% +10d) |
| DC voltage | 0V-600V | 1mV-1V | ± (1.2% +10d) |
| AC current | 0A-600A | 10mA-11A | ± (2.5% +20d) |
| DC current | 0A-600A | 10mA-11A | ± (2.5% +20d) |
| Resistance | 0Ω-40MΩ | 0.10-10kΩ | ± (1.5% +10d) |
| Capacitor | 0nF-4mF | 1pF-1uF | ±(4.0% +15d) |
| Hz frequency | 0Hz-4MHz | 0.1Hz-1kHz | ±(3.0% +10d) |
Additional Specifications
- Battery: 1.5V AAA battery * 2
- Weight: 154g
- Jaw opening: 30mm/1.18inch
- Material: ABS
- Max count: 4000 Counts
- Auto power off: Automatic shutdown after 15 minutes of misoperation ⚙️
Note: The above parameters are for reference only. The actual measurement of the specific equipment shall prevail!
Included Accessories
- Packaging color box
- Manual
- Clamp meter (PN200)
- Test pen line
- Storage bag
After-Sales Service
ANENG provides professional after-sales service. For any issues regarding product use, quality, or operation, please contact ANENG customer service. They offer solutions for quality problems, replacement or refund requests, and troubleshooting. Customers can also receive coupons for positive reviews.
For detailed inquiries, contact ANENG customer service.
