JOMILIN C5 Quick Start Guide
1.0 Specification
| Speaker size | Φ 40.0mm | Charging port | Type-C |
| Battery capacity | 500mAh | Speaker impedance | 32Ω |
| NRR | -20±3dB | Transmission range | >10m |
| Frequency response range | 20Hz-20000Hz | Battery Version | V5.3 |
| Charging time | 2.5H | Standby time | 200H |
2.0 Key function guide
| Function Description | Operation method | Prompt tone | Indicator |
| Power On; boot up; turn on | Long-press the power on button. | / | The blue light stays on constantly. |
| Power off; shut down | Long-press the power on button. | / | The red light turns on for 1 second and then goes off. |
| Pairing status | Open the paired devices, select the corresponding pairing name and click to connect. | The red and blue lights blink alternately. | / |
| Paired successfully; Connected | After the device and the headset are successfully paired. Click on the Bluetooth name of the device to connect. | / | The blue light stays on constantly. |
| Disconnect | The headset re-enters the pairing state. | The red and blue lights blink alternately. | / |
| Reconnect | It will automatically reconnect to the last connected device when powered on. When it is out of the transmission range and then back within the effective range, it will automatically reconnect. | / | The blue light stays on constantly. |
| Dual-device connection | After the headset is successfully connected to the first device, turn off the Bluetooth of the first device, turn on the Bluetooth of the second device for pairing and connection. Then turn on the Bluetooth of the first device again and click on the Bluetooth connection to complete the dual device connection. | / | The blue light stays on constantly. |
| Bluetooth reset | Simultaneously long-press the volume "+" and "-" buttons for 3 seconds. | toot | The red and blue lights blink alternately. |
| Play | Press the power on button once briefly. | / | The blue light blinks slowly. |
| Voice assistant | Triple-click the power on button. | / | The blue light blinks slowly. |
| Pause | Press the power on button once briefly. | / | The blue light stays on constantly. |
| AUX cable | Inserting an audio cable while the device is powered on will cause it to shut down automatically. | / | The blue light blinks slowly. |
| Turn off | It will shut down during charging. | / | / |
| Volume up | Press the "+" button once briefly. | Maximum volume | The blue light blinks slowly. |
| Low battery | It starts to give a warning when the battery level reaches 20%, and gives a warning every 10 minutes. | Battery Low | The red light blinks slowly twice. |
| Volume down | Press the "-" button once briefly. | beep | The blue light blinks slowly. |
| Charging | / | / | The blue light blinks slowly. |
| Fully charged | / | / | The blue light blinks slowly. |
| Next track/song | Press and hold the "+" button. | / | The blue light blinks slowly. |
| Previous track/song | Press and hold the "-" button. | / | The blue light blinks slowly. |
| Incoming call | Press the play button to answer the incoming call. | ringtone prompt | The blue light blinks slowly. |
| Answer | Press the power on button once briefly. | / | The blue light blinks slowly. |
| Hang up | Press the power on button once briefly. | beep | According to the current mode. |
| Reject | Press and hold the power on button. | beep | According to the current mode. |
| Call back | Double click the power on button. | / | The blue light blinks slowly. |
| ANC | Click the multi-function button once to turn the ANC function on or off. | Anc On/Anc Off | ANC Mode: The green light stays on constantly. / ANC off: According to the current mode. |
| Bass - heavy mode | Long-press the ANC button. | / | / |
| Cinema mode | / | / | / |
| Normal mode | / | / | / |
3.0 Bluetooth connection tutorial
Turn on the headphones and enable Bluetooth on your first mobile phone. Search for the "JOMILIN C5" and connect to the headphones.
Bluetooth: JOMILIN C5
Modes: Bass mode, Cinema mode, Normal mode
ANC Mode: The green light stays on constantly. ANC off: According to the current mode.
Thank you for purchasing the JOMILIN authentic product.
FC ROHS CE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.