Victron Orion-Tr Smart DC-DC Charger Isolated

250/400 Watt | With 3-stage battery charge algorithm

Key Features

Bluetooth Smart Enabled: Monitor, change settings, and update firmware via the VictronConnect App on smartphones or tablets. Instant readout of data, warnings, and alarms.
Fully Programmable: Supports configurable battery charge algorithms or fixed output voltage.
Smart Alternator Compatibility: Features engine running detection to prevent starter battery discharge when the engine is off (Euro 5/6 engines).
Adaptive 3-Stage Charge Algorithm: Bulk, Absorption, Float stages optimized for lead-acid and lithium batteries. Absorption time adjusts based on discharge depth for lead-acid; fixed for lithium.
Remote On/Off: Connect a switch or relay to a two-pole connector for remote control.
Parallel Capability: Multiple units can be connected in parallel to increase output current.
High Temperature Protection: Output current reduces at high ambient temperatures.
IP43 Protection: Achieved when installed with screw terminals oriented downwards.
Screw Terminals: Facilitates installation without special tools.
Input Fuse: Non-replaceable.

Diagram Description

A diagram illustrates the charger's connection: An alternator connects to the input/starter battery, and the Orion-Tr Smart DC-DC charger connects between the starter battery and the output/auxiliary battery. The VictronConnect app interface is shown on a smartphone, displaying charger status like input voltage, output voltage, and charge mode (e.g., Bulk).

Model Specifications

Orion-Tr Smart Chargers Isolated 220 - 280 Watt

Specification	12/12-18 (220 W)	12/24-10 (240 W)	24/12-20 (240 W)	24/24-12 (280 W)
Input voltage range (1)	8-17 V	8-17 V	16-35 V	16-35 V
Under voltage shut down	7 V	7 V	14 V	14 V
Under voltage restart	7.5 V	7.5 V	15 V	15 V
Nominal output voltage	12.2 V	24.2 V	12.2 V	24.2 V
Output voltage adjust range	10-15 V	20-30 V	10-15 V	20-30 V
Output voltage tolerance	+/- 0.2 V	+/- 0.2 V	+/- 0.2 V	+/- 0.2 V
Output noise	2 mV rms	2 mV rms	2 mV rms	2 mV rms
Cont. output current at nominal output voltage and 40 °C	18 A	10 A	20 A	12 A
Maximum output current (10 s) at nominal output voltage minus 20 %	25 A	15 A	25 A	15 A
Short circuit output current	40 A	25 A	50 A	30 A
Cont. output power at 25 °C	280 W	280 W	300 W	320 W
Cont. output power at 40 °C	220 W	240 W	240 W	280 W
Efficiency	87 %	88 %	88 %	89 %
No load input current	< 80 mA	< 100 mA	< 100 mA	< 80 mA
Standby current	Less than 1mA	Less than 1mA	Less than 1mA	Less than 1mA
Galvanic isolation	200 VDC between input, output and case
Operating temperature range	-20 to +55 °C (derate 3% per °C above 40 °C)
Humidity	Max. 95% non-condensing
DC connection	Screw terminals
Maximum cable cross-section	16 mm² AWG6
Weight	1.3 kg (3 lb)	1.3 kg (3 lb)	1.3 kg (3 lb)	1.3 kg (3 lb)
Dimensions h x w x d	130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
Protection category	IP43 (electronic components), IP22 (connection area)
Standards: Safety	EN 60950
Emission / Immunity	EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive Directive	ECE R10-5

Orion-Tr Smart Chargers Isolated 360 - 400 Watt

Specification	12/12-30 (360 W)	12/24-15 (360 W)	24/12-30 (360 W)	24/24-17 (400 W)
Input voltage range (1)	10-17 V	10-17 V	20-35 V	20-35 V
Under voltage shut down	7 V	7 V	14 V	14 V
Under voltage restart	7.5 V	7.5 V	15 V	15 V
Nominal output voltage	12.2 V	24.2 V	12.2 V	24.2 V
Output voltage adjust range	10-15 V	20-30 V	10-15 V	20-30 V
Output voltage tolerance	+/- 0.2 V	+/- 0.2 V	+/- 0.2 V	+/- 0.2 V
Output noise	2 mV rms	2 mV rms	2 mV rms	2 mV rms
Cont. output current at nominal output voltage and 40 °C	30 A	15 A	30 A	17 A
Maximum output current (10 s) at nominal output voltage minus 20 %	40 A	25 A	45 A	25 A
Short circuit output current	60 A	40 A	60 A	40 A
Cont. output power at 25 °C	430 W	430 W	430 W	480 W
Cont. output power at 40 °C	360 W	360 W	360 W	400 W
Efficiency	87 %	88 %	88 %	89 %
No load input current	< 80 mA	< 100 mA	< 100 mA	< 80 mA
Standby current	Less than 1mA	Less than 1mA	Less than 1mA	Less than 1mA
Galvanic isolation	200 VDC between input, output and case
Operating temperature range	-20 to +55 °C (derate 3% per °C above 40 °C)
Humidity	Max. 95% non-condensing
DC connection	Screw terminals
Maximum cable cross-section	16 mm² (AWG6)
Weight	12 V input and/or 12 V output models: 1.8 kg (3 lb)	Other models: 1.6 kg (3.5 lb)	12 V input and/or 12 V output models: 1.8 kg (3 lb)	Other models: 1.6 kg (3.5 lb)
Dimensions h x w x d	12 V input and/or 12 V output models: 130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch)	Other models: 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)	12 V input and/or 12 V output models: 130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch)	Other models: 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
Protection category	IP43 (electronic components), IP22 (connection area)
Standards: Safety	EN 60950
Emission / Immunity	EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive Directive	ECE R10-5

Note 1: If the output voltage is set to nominal or lower, it remains stable within the specified input voltage range (buck-boost function). If set higher, the minimum input voltage for stability increases proportionally.

Note 2: The VictronConnect App does not display input or output current. The Orion-Tr Smart does not have a VE.Direct port.

	Victron Energy Orion-Tr Smart DC-DC Charger Isolated 250-400W User Guide and Specifications Detailed information on the Victron Energy Orion-Tr Smart DC-DC charger, including features, specifications, and usage for isolated DC-DC charging applications in vehicles and boats.
	Victron Orion-Tr Smart DC-DC Charger (360-400W) - Non-Isolated Datasheet Detailed specifications and features for the Victron Orion-Tr Smart non-isolated DC-DC charger series, including models 12/12-30, 12/24-15, 24/12-30, and 24/24-17. Learn about Bluetooth connectivity, programmable charging, and performance.
	Victron Energy Orion-Tr Smart DC-DC Charger Non-Isolated Manual Comprehensive manual for the Victron Energy Orion-Tr Smart DC-DC Charger Non-Isolated, covering installation, features, safety, troubleshooting, specifications, and VictronConnect app usage. This device functions as a power supply or battery charger with smart alternator compatibility and advanced protection features.
	Victron Energy Orion-Tr Smart DC-DC Charger Isolated User Manual This manual provides detailed information on the Victron Energy Orion-Tr Smart DC-DC Charger Isolated, covering its features, installation, safety instructions, and configuration via the VictronConnect App.
	Victron Energy Orion-Tr Smart DC-DC Charger Isolated User Manual and Installation Guide Comprehensive user manual and installation guide for the Victron Energy Orion-Tr Smart DC-DC Charger Isolated. Covers safety, features, installation, engine shutdown detection, LED indicators, troubleshooting, specifications, VictronConnect app usage, and dimension drawings.
	Victron Energy Orion-Tr Smart DC-DC Isolated Charger Datasheet Technical datasheet for Victron Energy Orion-Tr Smart DC-DC isolated chargers, covering specifications, features, and model variations for efficient battery charging in vehicles, boats, and off-grid systems.
	Victron Energy Orion-Tr Smart DC-DC Charger Isolated: User Manual & Specifications Comprehensive user manual and technical specifications for the Victron Energy Orion-Tr Smart DC-DC Charger Isolated. Learn about features, installation, safety, and configuration with VictronConnect.
	Victron Energy Orion-Tr Smart DC/DC Ladebooster: Technische Daten und Übersicht Umfassende technische Daten und Merkmale des Victron Energy Orion-Tr Smart DC/DC Ladeboosters, isolierte Modelle. Erfahren Sie mehr über Bluetooth-Konnektivität, adaptive Ladealgorithmen und die Kompatibilität mit intelligenten Lichtmaschinen für Fahrzeuge und Boote.