4 days ago — Note: Read Section II Installation instructions before upgrading the device. Product. Bridge Software. EC3.5 software link. Xerox B225/B235. MXLSG.230.090.
Drivers & - Xerox C410 Color Printer - Xerox
Product Readme for Xerox B225/B230/B235/B305/B310/B315/B410 C230/C235/C310/C315/C410 General Release xxxxx.230.09x Release Date: July 2nd, 2024 dc24rn4196 Device Software Release Details Note: Read Section II Installation instructions before upgrading the device. Product Xerox® B225/B235 Xerox® B230 Xerox® B305/B315 Xerox® B310 Xerox® B410 Xerox® C230 Xerox® C235 Xerox® C310 Xerox® C315 Xerox® C410 Bridge Software MXLSG.230.090 MSLSG.230.090 MXLBD.230.090 MSLBD.230.090 MSTSN.230.091 CSLBL.230.090 CXLBL.230.090 CSNZJ.230.092 CXTZJ.230.092 CSTGV.230.091 EC3.5 software link MXLSG.230.091 MSLSG.230.091 MXLBD.230.091 MSLBD.230.091 MSTSN.230.092 CSLBL.230.091 CXLBL.230.091 CSNZJ.230.093 CXTZJ.230.093 CSTGV.230.092 I. Fixes/Features new in this release Features · Improvements to support print driver status (Bi-Di) communications. · Improvements for Microsoft Universal Print. · Improvements with Xerox Easy Assist (XEA) application. · Improvement to SMTP Test communication for Email Setup. See admin guide. · Local Account usernames are no longer case sensitive. · Print support for Arabic and Hebrew Fonts. · Ability to configure email to "Split Job by Pages". See admin guide. · Black Cartridge Status Bar at local UI is easier to see. · New feature that allows each tray to support a Universal (custom) size called "Multiple Universal Size". See admin guide. · Improvement to Chinese Font support for UI display and internal report printing. · New feature that allows a job to be canceled if there is an error such as a paper jam or add paper called "Automatic Deletion of Suspended Print Jobs". · Firmware downgrade is no longer supported. Various Bug Fixes · Change to handle SNMP community names up to 32 characters. · Serial number changing to ABC123 after Controller Board Replacement has been fixed in this version. II. Installation Notes Install instructions are included in the zip file containing firmware. Unzip and download before attempting to install the firmware. Upgrade Instructions Caution: · EC3.5 upgrade depends on how (or if) the "Admin" account has been setup in the device. · If the Admin account was setup in the device using the Install Wizard, then the device would have changed settings that will prevent upgrading the device directly to EC3.5 version. In this case, please install the Bridge version first and then upgrade to the EC3.5 230.xxx (or higher) version. Note: If you try upgrading the device to EC3.5 directly without the Bridge version, you will get an "Upload Failed [0]" error. Device will restart and come up with the original version in the device. · If the Admin account is NOT setup in the device using Install Wizard, then the device can be directly upgraded to EC3.5 230.xxx version. Note: To install EC3.5, Import/ Export All Settings must be enabled. · From EWS go to Settings Security Manage Permissions Access Controls Device Management -> "Import/ Export All Settings" · From LUI go to Settings Security Login Methods Manage Permissions Device Management -> "Import/ Export All Settings" Downgrade Instructions: Devices at Firmware level XXXXX.230.XXX or higher cannot be downgraded. If you attempt to downgrade you will receive a "Cannot Downgrade Error" message. © 2024 Xerox Corporation. All rights reserved. Xerox® is a registered trademark of Xerox Corporation in the United States and/or other countries. BR22773 Document Version: 1.0 (January 2024).Microsoft Word for Microsoft 365 Microsoft Word for Microsoft 365