Tork Constant Air Freshener Dispenser

Product Overview

The Tork Constant Air Freshener Dispenser is designed to provide continuous fragrance in various environments. It is battery-operated and features an adjustable interval setting for fragrance release.

Installation Guide

What's Included & Tools Needed

• Tork Constant Air Freshener Dispenser
• Air Freshener Refill
• Key for opening the dispenser
• Mounting hardware (screws, wall plugs)
• 2 x AA LR6 Batteries ?

Tools Required: Screwdriver ?️, Drill (with 1/4" or 6mm bit), Measuring tape.

Choosing the Installation Location

Select a location that is:

• Not near an "EXIT" sign ❌.
• In a well-ventilated area.
• Suitable for the environment, typically a bathroom or washroom.

Recommended environmental conditions: 20-35°C temperature and 40-60% relative humidity (rH).

Mounting the Dispenser

Ensure the dispenser is mounted in an upright position ⬆️ for proper functioning.

Method 1 (Alternative):

• Clean the wall surface.
• Open the dispenser using the key ?.
• Mount the dispenser to the wall using appropriate screws and wall plugs.

Method 2 (Alternative):

• Use a mounting template to mark screw positions.
• Drill holes and insert wall plugs.
• Secure the dispenser to the wall using screws.

Note: Mounting hole spacing is approximately 77 mm.

Installing Batteries

Open the battery compartment. Insert 2 x AA LR6 batteries ?, ensuring correct polarity. Close the compartment.

Inserting the Air Freshener Refill

Open the dispenser using the key ?. Insert the air freshener refill into the designated slot. You should hear a "CLICK" when it is properly seated. Ensure the dispenser is upright before inserting the refill.

Setting the Interval and Operation

The dispenser has an adjustable interval setting, typically controlled by a dial or switch. Common intervals are 30, 60, or 90 minutes ⏱️.

• Locate the interval adjustment dial/switch.
• Select your desired interval (e.g., 30, 60, or 90 minutes).
• Ensure the unit is switched ON.

Refill Status Indicators

The dispenser may feature indicator lights ? to show the status of the refill:

• Green Light (?): Refill is active and functioning normally.
• Orange Light (?): Refill is low.
• Red Light (?): Refill is empty or needs replacement.

Usage and Maintenance

Cleaning Instructions

• Use mild cleaners.
• Wipe with a cloth using soap and water.
• Do not use abrasives.
• The dispenser is not dishwasher safe.

Refill Recycling Information

For safety handling, please read the safety data sheet. Refills must be disposed of as hazardous waste in accordance with local regulations.

Technical Specifications

Radio Specifications (IoT Models)

Product Name: Tork Constant Air Freshener Dispenser IoT

Article Numbers: 256012 (white), 256013 (black)

Radio Technology Standard: IEEE 802.15.4

Modulation: Shaped OQPSK

Radio Frequency: 2.405 GHz

Number of Channels: 1 (802.15.4 channel 11)

Channel Bandwidth: 2 MHz

Duty Cycle: Max 0.1%

Listen Before Talk: Yes

Radio Output Power: 8 dBm

Antenna Type: Metal Antenna

Antenna Gain: Max 2.5 dBi

Battery Type: Alkaline "AA" - 2 Cells ?

Physical Specifications

Weight: 370 grams (13.0 ounces)

Dimensions: 119 x 147 x 98 mm (4.7 x 5.8 x 3.8 inches)

Declarations of Conformity

The radio equipment complies with EU Directive 2014/53/EU and UK Radio Equipment Regulations 2017. Full text available at www.torkglobal.com.

Manufacturer Information

Manufactured by Essity Hygiene and Health AB, SE-40503 Göteborg, Sweden.

Essity UK Limited, Southfields Road, Dunstable, Bedfordshire, LU6 3EJ, UK.

Essity Hygiene & Health AG, Parkstrasse 1b, CH-6214 Schenkon.

Made in U.A.E.

WEEE Information

The product is designed with recycling, reuse, and waste management in mind. Proper disposal of WEEE products conserves natural resources and protects human health and the environment. Marked products must not be disposed of with commercial, institutional, or municipal waste. They should be kept separate and returned to a designated collection point for dismantling, recycling, and/or reuse.