Amana AR9S96 / AD9S96 Single-Stage, Multi-Speed ECM Gas Furnace

HEATING INPUT: 40,000–120,000 BTU/H

AFUE: UP TO 96% AFUE

Standard Features

Heavy-duty stainless-steel tubular heat exchanger
Stainless-steel secondary heat exchanger
Single-stage gas valve
Durable Silicon Nitride igniter
Quiet single-speed induced draft blower
Self-diagnostic control board with constant memory fault code history output to a LED
All models comply with California 40 ng/J Low NOx emissions standard
Can not be installed in California's South Coast AirQuality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
AHRI Certified; ETL Listed

Cabinet Features

Designed for multi-position installation
AR9S96: upflow, horizontal left or right
AD9S96: downflow, horizontal left or right
Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
Easy-to-install top venting with optional side venting (AR9S96 upflow models only)
Convenient left or right connection for gas and electrical service
Cabinet air leakage (QLeak) ≤ 2%
Heavy-gauge steel cabinet with durable finish
Fully insulated heat exchanger and blower section
Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications

Product Specifications

The Amana AR9S96 and AD9S96 series furnaces offer a range of models with varying heating inputs and outputs, designed for efficient and reliable performance.

AR9S96 Product Specifications

Model	High Fire Input (BTU/h)	High Fire Output (BTU/h)	AFUE (%)	Temp. Rise Range (°F)	Vent Diameter (in)	No. of Burners	Circulator Blower (AC @ 0.5" ESP)	Blower Size (D x W)	Blower HP @ RPM	Filter Size (in²) (QTY)	Min. Circuit Ampacity	Max. Overcurrent Device (amps)	Shipping Weight (lbs)
AR9S96 0403AN	40,000	38,440	96	25-55	2" - 3"	2	1.5-3	11" x 6"	1/2 @ 9	(1) 16x25 (side/bottom)	9.7	15	108
AR9S96 0603BN	60,000	57,660	96	35-65	2" - 3"	3	1.5-3	11" x 8"	1/2 @ 9	(1) 16x25 (side/bottom)	10.1	15	118
AR9S96 0803BN	80,000	76,880	96	35-65	2" - 3"	4	1.5-3	11" x 8"	3/4 @ 9	(1) 16x25 (side/bottom)	10.1	15	118
AR9S96 0804CN	80,000	76,880	96	25-55	2" - 3"	4	1.5-4	11" x 10"	3/4 @ 9	(1) 16x25 (side/bottom)	13.7	20	141
AR9S96 0805CN	80,000	76,880	96	25-55	2" - 3"	4	1.5-4	11" x 10"	3/4 @ 9	(1) 16x25 (side/bottom)	16.7	25	142
AR9S96 1005CN	100,000	96,100	96	30-60	2" - 3"	5	3-5	11" x 10"	1 @ 9	(1) 20x25 (bottom) or (2) 16x25 (side)	16.7	25	144
AR9S96 1205DN	120,000	115,320	96	35-65	3"	6	3-5	11" x 11"	1 @ 9	(1) 20x25 (bottom) or (2) 16x25 (side)	16.7	25	156

AD9S96 Product Specifications

Model	High Fire Input (BTU/h)	High Fire Output (BTU/h)	AFUE (%)	Temp. Rise Range (°F)	Vent Diameter (in)	No. of Burners	Circulator Blower (AC @ 0.5" ESP)	Blower Size (D x W)	Blower HP @ RPM	Filter Size (in²) (QTY)	Min. Circuit Ampacity	Max. Overcurrent Device (amps)	Shipping Weight (lbs)
AD9S96 0403BN	40,000	38,440	96	25-55	2" - 3"	2	1.5-3	11" x 8"	1/2 @ 9	(2) 10x20 (top return) or (1) 14x20 (bottom)	10.1	15	113
AD9S96 0603BN	60,000	57,660	96	35-65	2" - 3"	3	1.5-3	11" x 8"	1/2 @ 9	(2) 10x20 (top return) or (1) 14x20 (bottom)	10.1	15	116
AD9S96 0804CN	80,000	76,880	96	40-70	2" - 3"	4	2.5-4	11" x 10"	3/4 @ 9	(2) 10x20 (top return) or (1) 16x25 (top return)	13.7	20	141
AD9S96 1005CN	100,000	95,000	95	40-70	2" - 3"	5	3-5	11" x 10"	1 @ 9	(1) 16x25 (top return) or (1) 20x25 (top return)	16.7	25	144
AD9S96 1205DN	120,000	114,000	95	45-75	3"	6	3-5	11" x 11"	1 @ 9	(1) 16x25 (top return) or (1) 20x25 (top return)	16.7	25	156

Dimensions

Detailed dimensional drawings and minimum clearance requirements are provided for both AR9S96 and AD9S96 models.

AR9S96 Dimensions

Model	A (in)	B (in)	C (in)	D (in)	E (in)
AR9S960403AN	14"	12½"	10%"	85%"	10%"
AR9S960603BN	17½"	16"	13%"	12%"	13%"
AR9S960803BN	17½"	16"	13%"	12%"	13%"
AR9S960804CN	21"	19½"	17%"	16"	17½"
AR9S960805CN	21"	19½"	17%"	16"	17½"
AR9S961005CN	21"	19½"	17%"	16"	17½"
AR9S961205DN	24½"	23"	20%"	19%"	20%"

Minimum Clearances to Combustible Materials (AR9S96)

Position	Sides	Rear	Front	Bottom	Flue	Top
Upflow	0"	0"	1"	C	0"	1"
Horizontal	6"	0"	ALCOVE	C	0"	4"

C = If placed on combustible floor, the floor MUST be wood ONLY.

AD9S96 Dimensions

Model	A (in)	B (in)	C (in)	D (in)	E (in)	F (in)
AD9S960403BN	17½"	16"	13%"	12%"	13%"	13%"
AD9S960603BNA	17½"	16"	13%"	12%"	13%"	13%"
AD9S960804CN	21"	19½"	17%"	16"	17½"	17½"
AD9S961005CN	21"	19½"	17%"	16"	17½"	17½"
AD9S961205DN	24½"	23"	20%"	19%"	20%"	20%"

Minimum Clearances to Combustible Materials (AD9S96)

Position	Sides	Rear	Front	Bottom	Flue	Top
Downflow	0"	0"	1"	NC	0"	1"
Horizontal	6"	0"	ALCOVE	C	0"	4"

C = If placed on combustible floor, the floor MUST be wood ONLY. NC = For installation on non-combustible floors only. A combustible floor sub-base must be used for installations on combustible flooring.

Airflow Data

The document includes detailed tables for Heating Airflow Data and Cooling & Circulation Airflow for both AR9S96 and AD9S96 models, correlating CFM and Temperature Rise with External Static Pressure.

AR9S96 Heating Airflow Data

This section provides data on CFM and Temperature Rise for various models across different external static pressures (0.1 to 0.8 inches water column).

AR9S96 Cooling & Circulation Airflow

This section provides data on CFM and Watts for various models across different external static pressures (0.1 to 0.8 inches water column) for cooling and circulation.

AD9S96 Heating Airflow Data

This section provides data on CFM and Temperature Rise for various AD9S96 models across different external static pressures (0.1 to 0.8 inches water column).

AD9S96 Cooling & Circulation Airflow

This section provides data on CFM and Watts for various AD9S96 models across different external static pressures (0.1 to 0.8 inches water column) for cooling and circulation.

Wiring Diagram

A comprehensive wiring diagram is provided, illustrating the electrical connections for the furnace components. It includes a legend for wire colors and designations, as well as error code status indicators.

Important Notes on Wiring:

Manufacturer's specified replacement parts must be used.
Replacement wiring material must have a temperature rating of at least 105° C and use copper conductors only.
Unit must be permanently grounded and conform to N.E.C. and local codes.
To recall the last 6 faults, depress the switch for more than 2 seconds while in standby.
When paired with non R-32 refrigerant systems, default settings may need to be changed. Refer to the installation manual.
A2L mode is enabled by default.

WARNING: DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Accessories

A variety of accessories are available for the AR9S96 and AD9S96 furnaces, including vent kits, drain kits, filter racks, flush mount vent kits, fossil fuel kits, high-altitude kits, and LP conversion kits. Specific accessory availability varies by model.

Available Accessories for AR9S96 Models

Model	Description	AR9S96 0403ANA	AR9S96 0603BNA	AR9S96 0803BNA	AR9S96 0804CNA	AR9S96 0805CNA	AR9S96 1005CNA	AR9S96 1205DNA
72950	Concentric Vent Kit (2")	✓	✓	✓	✓	✓	✓	✓
72951	Concentric Vent Kit (3")	✓	✓	✓	✓	✓	✓	✓
RF000142	Drain Kit Horizontal Left Vertical Flue	✓	✓	✓	✓	✓	✓	✓
EFRO2	External Filter Rack with 16"x25" Permanent Filter	✓	✓	✓	✓	✓	✓	✓
0170K00000S	Flush Mount Vent Kit - 3" or 2"	✓	✓	✓	✓	✓	✓	✓
0170K00001S	Flush Mount Vent Kit - 2"	✓	✓	✓	✓	✓	✓	✓
AFE18-60A	Fossil Fuel (Dual Fuel) Kit	✓	✓	✓	✓	✓	✓	✓
HASFK	High-Altitude Natural Gas Kit	TBD	HASFK-4	HASFK-4	HASFK-4	HASFK-4	HASFK-4	HASFK-4
HASFK	High-Altitude LP Gas Kit	TBD	HASFK-6	HASFK-6	HASFK-6	HASFK-5	HASFK-5	HASFK-5
0270F05404	Horizontal Drain Tubing Kit	✓	✓	✓	✓	✓	✓	✓
LPM-33	LP Conversion Kits	✓	✓	✓	✓	✓	✓	✓

Available Accessories for AD9S96 Models

Model	Description	AD9S96 0403BNA	AD9S96 0603BNA	AD9S96 0804CNA	AD9S96 1005CNA	AD9S96 1205DNA
72950	Concentric Vent Kit (2")	✓	✓	✓	✓	✓
72951	Concentric Vent Kit (3")	✓	✓	✓	✓	✓
CFSB17	Downflow Sub-Base 17.5"	✓	✓
CFSB21	Downflow Sub-Base 21"			✓	✓	✓
CFSB24	Downflow Sub-Base 24"					✓
RF000142	Drain Kit Horizontal Left Vertical Flue	✓	✓	✓	✓	✓
EFRO2	External Filter Rack with 16"x25" Permanent Filter	✓	✓	✓
0170K00000S	Flush Mount Vent Kit - 3" or 2"	✓	✓	✓	✓	✓
0170K00001S	Flush Mount Vent Kit - 2"	✓	✓	✓	✓	✓
AFE18-60A	Fossil Fuel (Dual Fuel) Kit	✓	✓	✓	✓	✓
HASFK	High-Altitude Natural Gas Kit	HASFK-4	HASFK-4	HASFK-4	HASFK-4	HASFK-4
HASFK	High-Altitude LP Gas Kit	HASFK-5	HASFK-5	HASFK-5	HASFK-5	HASFK-5
0270F05405	Horizontal Drain Tubing Kit	✓	✓	✓	✓	✓
LPM-33	LP Conversion Kits	✓	✓	✓	✓	✓

Temperature Rise Range Chart

A chart is provided to visually determine the temperature rise based on BTU Output and Airflow (CFM).

	Amana 90%+ Gas Furnaces: Efficient, Reliable Home Heating \| Product Overview Discover Amana's 90%+ AFUE gas furnaces, designed for efficient, reliable home heating. This product overview includes detailed specifications, warranty information, and model comparisons for optimal comfort and performance. Learn about Amana's commitment to quality and energy efficiency for your home.
	Amana AM9S92 ECM Gas Furnace: Features, Specifications, and Airflow Data Comprehensive details on the Amana AM9S92 single-stage, multi-speed ECM gas furnace, including features, product specifications, dimensions, airflow data, wiring diagrams, and available accessories.
	Amana High-Efficiency Gas Furnaces: Features, Technology, and Specifications Explore Amana's range of high-efficiency gas furnaces boasting AFUE ratings over 90%. Learn about their advanced features, including ComfortBridge™ technology, smart thermostat compatibility, innovative heat exchangers, and comprehensive specifications for optimal home comfort.
	Amana AMVC96 (B) Two-Stage Variable-Speed ECM Gas Furnace Detailed specifications, features, and dimensions for the Amana AMVC96 (B) two-stage, variable-speed ECM gas furnace, offering up to 96% AFUE.
	Amana High-Efficiency Gas Furnaces: Comfort, Efficiency, and Innovation Discover Amana's advanced gas furnaces, offering superior energy efficiency (90+% and 80% AFUE), innovative features like R-32 refrigerant and ComfortBridge™ technology, and reliable performance for home comfort. Learn about Amana's legacy and support.
	Amana 80% Gas Furnaces: Product Specifications and Overview Explore Amana's 80% AFUE gas furnaces, featuring reliable performance, various warranty options, and advanced features like ComfortBridge™ compatibility. This document provides detailed product specifications for models including ARVT80, ADVT80, ARVS80-U, AR9T80, AD9T80, AR9S80, AR9S80-U, and AD9S80, along with important installation and safety warnings.
	Amana GUCA, GCCA 40" 90% Condensing Gas Furnaces Service Instructions Comprehensive service instructions for Amana's 40" 90% Condensing Gas Furnaces, including GUCA, GCCA models, and accessories. This guide covers product identification, specifications, system operation, maintenance, and troubleshooting for qualified HVAC technicians.
	Amana Indoor Coils: Product Specifications, Nomenclature, and Airflow Data Comprehensive product specifications, nomenclature, dimensions, and airflow data for Amana's range of indoor coils, including CAPTA, CHPEA, CAPFA, CSCT, CAUTA, and CAHEA models, designed for R-32 refrigerant.