Yaheetech Cat Tree Assembly Instructions
Model #: 591853
Important Information & Safety
Important: Please follow these instructions carefully and use a protective pad during assembly. ?️
Assembly Requirements: For easier and safer assembly, 2 or more adults are recommended. ???
Estimated Assembly Time: Approximately 0.5 hours, depending on individual skill. ⏳
Safety Warnings:
- This product is not intended for children to climb. Keep children away from climbing on it to prevent injury. ?
- Do not place the product near fire or heat sources to avoid fire hazards. ?❌
- Do not use harsh or corrosive cleaning agents. ?❌
- Be careful of your hands during assembly. Wearing protective gloves is recommended. ?
- Check all parts against the parts list before assembly. Contact customer service immediately if any parts are damaged or missing.
- It is recommended to check the tightness of all connections every six months.
- The warnings and instructions in this manual may not cover all possible situations. For further assistance, please contact Yaheetech via email.
Parts List
| Part # | Description | Quantity |
|---|---|---|
| 1 | Base Board | x1 |
| 2 | Side Panel with Arch | x1 |
| 3 | Top Perch/Bed | x1 |
| 4 | Short Scratching Post | x1 |
| 5 | Main Condo Box | x1 |
| 6 | Ramp | x1 |
| 7 | Plush Bed/Cushion | x1 |
| 8 | Long Scratching Post | x1 |
| 9 | Small Condo Box | x1 |
| 10 | Short Support Posts | x8 |
| 11 | Long Support Posts | x2 |
| 12 | Screw (M8x40) | x22 |
| 13 | Screw (M8x25) | x3 |
| 14 | Screw (M6x14) | x4 |
| 15 | Allen Wrench | x1 |
| 16 | Plastic Bracket/Connector | x1 |
| 17 | Plastic Bracket/Connector | x1 |
Assembly Steps
Step 1
Attach the main condo box (5), short scratching post (4), long scratching post (8), and two short support posts (10) to the base board (1). Secure using eight M8x40 screws (12) and one M8x25 screw (13). Ensure posts are vertical and stable.
[Diagram: Base board with four vertical posts and a condo box attached, secured by screws from underneath.]
Step 2
Attach the side panel with arch (2) to the main condo box (5). Then, attach the top perch/bed (3) to the top of the structure. Use one M8x40 screw (12), two M8x25 screws (13), and four M6x14 screws (14) for these connections.
[Diagram: Attaching a side panel with an arch to the condo box and placing the top perch.]
Step 3
Attach the ramp (6) to the base board (1) and one of the main vertical support posts (11). Secure the ramp using the provided hardware. Note: The diagram indicates two long support posts (11) are part of the structure, and the ramp connects to one of them.
[Diagram: Attaching a ramp to the base and a vertical support post.]
Step 4
Securely attach the top perch/bed (3) to the assembled structure. Use one M8x40 screw (12) and one M8x25 screw (13) for this step.
[Diagram: Reinforcing the attachment of the top perch.]
Step 5
Place the plush bed/cushion (7) onto the top perch (3). Attach the small condo box (9) to the structure. Use one M8x40 screw (12) and two M8x25 screws (13) for these attachments.
[Diagram: Placing a cushion on the top perch and attaching a small condo box.]
Step 6
Attach the remaining short scratching post (4) to the structure. Use two M8x40 screws (12) to secure it.
[Diagram: Attaching a short scratching post to a platform or base.]
Step 7
Perform a final check of all connections. Use the provided Allen wrench (15) to ensure all screws are tight. Attach any remaining plastic brackets/connectors (16, 17) as indicated.
[Diagram: Using an Allen wrench to tighten screws and attaching final plastic pieces.]
Customer Support & Resources
Thank you for choosing Yaheetech. For further assistance or information, please contact us via email at info@yaheetech.de.
You can download a comprehensive user manual by scanning the QR code below or visiting: www.yaheeshop.com/pdf/all-1-5011967.pdf
[QR Code: Link to downloadable user manual]
