Backyard Expressions 911720 Two Independent Swing Assembly Instructions

Before Assembly

1. Unwrap all packaging materials and verify all parts against the parts list.
2. Prepare necessary tools and ensure adequate assembly space.
3. Assembly by two people is recommended.
4. Tighten all bolts only at the end of the assembly process to facilitate easier assembly.

Warnings

1. Maximum weight capacity: 500 lbs (250 lbs per seat). Do not exceed this limit.
2. Do not stand on the product.
3. Assemble and use on firm, level ground to prevent tipping. Ensure the frame remains in contact with the ground at all times.
4. Keep small parts away from children.
5. Regularly check screws and bolts for tightness and security (monthly check recommended).
6. Do not use if parts are missing, damaged, or worn.
7. Exercise caution when sitting down if carrying sharp objects, as they may tear fabric or sling material.
8. Remove cushions and store in a protected area when not in use, especially during wind or rain.
9. Each seat is designed for one person at a time.
10. Do not place objects in front of or behind the swing when in use.
11. Keep arms and legs clear of the gap between the seat and frame during use.
12. Handle glass components with care during assembly and moving. Take precautions against tipping and glass breakage during adverse weather.
13. The manufacturer is not responsible for weather-related damages.

Care Instructions

1. Clean by wiping with a damp sponge and warm soapy water. Follow with a dry, clean cloth. Avoid solvent-based cleaners or detergents, which can cause bleaching or damage.
2. Do not use a pressure washer.
3. Avoid scourers, abrasives, or chemical cleaners.
4. Store in a cool, dry place during inclement weather and winter months. Ensure the frame and seats are clean and dry before storage.
5. Consider using furniture covers for protection when the product is not in use.
6. The frames are powder-coated steel. Touch up any scratches with paint to prevent rust.

Parts List

Refer to the diagrams for specific part identification. Key components include:

• Frame pieces (A, B, C, D, E, F, G)
• Seat components (H, I, J)
• Hardware (1-7, 8, 9, 10, 11, 12, 16, 25, 48)

Specific hardware includes M8x70mm (2PCS), M8x65mm (2PCS), M6x65mm (2PCS), M6x55mm (17PCS), M8x40mm (2PCS).

Assembly Steps

Follow the numbered diagrams for step-by-step assembly. Key steps involve connecting frame components, attaching seats, and securing all hardware.

Step 1: Assemble the base frame using components A, B, C, D, E, F, G and associated hardware.

Step 2: Attach the main support structure.

Step 3: Connect the seat supports and backrests.

Step 4: Attach the canopy supports.

Step 5: Install the seats and ensure all connections are secure.

Step 6: Attach the top canopy.

Step 7: Final tightening of all bolts and checks.

Step 8: Final assembly overview.

Customer Service and Warranty

For assistance with parts or service, contact Backyard Expressions at customerservice@ddicorp.com.

Keep your original receipt and instruction manual for future reference, as the original receipt is required for any warranty claims.

For parts and parts listings, visit: https://backyard-expressions.com/collections/replacement-parts

Warranty Information:

• The product warranty does not cover damage from accident, negligence, weather, alteration, abuse, misuse, or products sold as-is or discounted.
• DDI is not responsible for consequential damages.
• Product liability is limited to repair or replacement of defective products at DDI's discretion.
• Warranty claims received after 90 days may incur additional costs.

For inquiries, you may also leave a message or send a text to 1-612-888-7550. Messages will be responded to during normal weekday business hours.