Geekvape WENAX S3 EVO User Manual

Product Overview

The Geekvape WENAX S3 EVO is a vaping device with the following key components:

• Drip Tip: The part you inhale from.
• E-juice Fill Port: Where you fill the device with e-liquid.
• Airflow Slider: Allows adjustment of the airflow.
• USB-C Port: For charging the device.
• LED Ring: Indicates device status and battery level.
• Firing Button: Used to activate the device and control settings.

Setup Guide

Filling with E-liquid: Fill with e-juice from the fill port. Ensure to plug up the port after filling. Do not open and close the drip tip from time to time except for filling e-liquid to avoid oil squeezing problems.

Instructions

1. Turning On Device: When the device is off, press the Firing button 5 times in quick succession to turn on the device.
2. Locking Firing Button/Children Tampering-proof: When the device is on, press the firing button 5 times in quick succession to lock the firing button. The device can still perform auto-draw and power adjustment.
3. Turning Off Device: When Button Lock is on, press the Firing button 5 times in quick succession to turn off the device. Drawing and button pressing will not activate the device unless switched on again.
4. Adjusting Power: Quickly press the button 3 times to switch between Low (Red), Medium (Blue), and High (Green) to adjust the output. There are 3 levels of output power available.
5. Battery Level: The interactive LED indicates battery level with different colors when using or charging the device: White = 0-30%, Blue = 31-69%, Green = 70-100%.

Important Information and Warnings

• This product is not intended for use by pregnant women, children, and individuals under the age of 21.
• Keep away from fire or extreme heat.
• Avoid impact.

Customer Service

• Main Page: www.geekvape.com
• Address: 605, Building 1, Qianhai Kexing Science Park, Labor Community, Xixiang Street, Bao'an District, Shenzhen
• Phone: (001) 866-985-6876
• Email: support@geekvape.com
• Available Time: 24/7

Anti-Counterfeiting Check

1. Go to www.geekvape.com and find PRODUCT VERIFICATION at the bottom of the main page.
2. Scratch the code bar under the label on the box and enter the 12-digit security number in the blank on the webpage.
3. Click 'Go' and a pop-up window will appear confirming if your product is authentically made.

Technical Specifications

• Material: 105 matte paper
• Color: PANTONE 1505C + K 100, color difference △E≤1.00
• Finished Product Size: 32*80mm (marked size tolerance: X.±1mm)
• Process: Printing 1 color + single black/double-sided printing/matte oil on cover and back cover/accordion fold
• Precautions: Cut edges must be neat and without burrs. Printing is based on the file. Strictly follow the drawings for production. No color difference/edge bursting/powder falling, etc. Ink and glue (white latex, hot melt adhesive) must comply with RoHS requirements.

Document Information

• Manufacturer: Geekvape Technology co., LTD
• Drawing/Date: Wei Peng 2024/7/15
• Review/Date:
• Approval/Date:
• Material Drawing Number: GS0278-P-58-A1
• Page Number: 01
• Paper Size: A3
• Unit: mm
• Scale: 1:1
• Version:
• View: (+)

Drawings and technical specifications are owned by Geekvape. Reproduction, reprinting, or use for any other purpose without the formal written permission of Geekvape is prohibited.