PCE-ABT 220 Touchscreen Analytical Balance

Introduction

Thank you for choosing the PCE-ABT 220 analytical balance. This user manual provides information on installation, accessories, troubleshooting, customer service, and general maintenance. It also presents various application possibilities. Please read the user manual carefully before commissioning. If you have any questions about the balance, please contact us. PCE balances are ideal for weighing in the laboratory and for general use. The balances can also be used for some advanced weighing functions.

Features:

• Stainless steel weighing pan
• LCD display with backlight
• RS232 interface
• Adapter included in delivery
• Windshield included in delivery
• Adjustable feet, spirit level
• Internal self-calibration
• Selectable weight units: g, oz, ct, mg
• Total weighing memory
• Weighing function
• Piece counting function
• Weighing below the balance

Specifications

Balance Calibration

Press the CAL button, and it will display: CAL XXX.XXXX, and the balance will start internal calibration. You can also select manual calibration with a standard weight, and the instructions will show you the further steps.

Calibration Types:

• One-point calibration
• Multi-Calibration
• Internal-Calibration

Balance Location

• Do not place the balance in a location where accuracy may be affected.
• Avoid extreme temperatures. Do not expose the device to direct sunlight or place it near an air conditioning unit.
• Avoid unsuitable tables. The table or floor must be firm and vibration-free.
• Avoid unstable power sources. Do not use the balance near devices with high power consumption, such as welding equipment or large motors.
• Do not place the balance near vibrating machinery.
• Avoid high humidity, as this can lead to condensation. Avoid direct contact with water. Do not spray water on the balance or immerse it in water.
• Avoid air movements caused by fans or open doors. Do not place the device near open windows, fans, or air conditioning units.
• Keep the balance clean. Do not place anything on the balance when it is not in use.

Balance Configuration

Mounting the Balance

• Place the balance on a firm, vibration-free surface.
• Carefully open the windshield cover and insert the stainless steel weighing pan.
• Level the balance using the adjustable feet and the spirit level.
• Connect the balance to the power supply.
• To improve performance, let the balance warm up for approximately 30-60 minutes and calibrate it before use.

Aligning the Balance

After placing the balance in the correct position, align it using the adjustable feet and the spirit level. Turn the adjustable feet at the back of the balance until the bubble of the spirit level is in the center.

Operating Configuration

The display shows:

• 1 - Status symbol
• 2 - Function
• 3 - Weight data
• 4 - Notes
• 5 - Control buttons

Sensitivity Configuration

Selectable sensitivities:

• Low Sensitivity
• Normal Sensitivity
• Max. Sensitivity

Speed Setting

Selectable speeds:

• Low Speed
• Normal Speed
• High Speed

Weighing Unit Configuration

In weighing mode, press "CONVERSION" to select the unit. There are 4 units to choose from: g/ct/oz/mg.

Piece Counting Function

The balance has a piece counting function. Have products with the same weight and a minimum weight of ≥0.5 mg ready.

1 - Select the quantity of the sample to be placed on the weighing pan.

2 - Select the weight value you want to weigh. Under "Sample weight", the weight of the sample will be displayed. After the weight has stabilized, tap it again, and the result will be displayed and saved.

3 - Tap here to get the total weight. Tap again to check. Carefully remove the balance from the packaging and lift it out of the carton. In the packaging, you will find everything you need to start weighing.

4 - The quantity is displayed on the screen.

Percentage Function

Check the percentage weighing function:

1 - Select 100% to place on the balance.

2 - Tap the value you want to weigh. The weight will be displayed. After the weight has stabilized, tap it again. The result will be checked and saved.

3 - Tap here to weigh the total weight, then tap again to check the weight.

4 - The percentage is displayed here.

Density Function

Works the same as the piece counting function, but you tap on "Air weight" and "Weight in air" and then on "Weighing in liquid" and the result will be displayed on the screen.

Troubleshooting

If problems occur, you can identify them and find a solution.

Data Output

The data output format is as follows:

• 1: Model or decimal point
• 2: Space or decimal point
• 3: Space or *
• 4: + or - or decimal point
• 5: Data
• 6-11: Data or decimal point
• 12: Data
• 13: Unit 1
• 14: Unit 2
• 15: Unit 3
• 16: Enter
• 17: Cover

Printer Setting

You can select the baud rate and communication type according to different printers or PC connection.

Disposal

NOTE regarding the Battery Ordinance (BattV)
Batteries must not be disposed of in household waste: The end consumer is legally obliged to return them. Used batteries can be returned to designated collection points or to PCE Deutschland GmbH, among others.

Collection point according to BattV: PCE Deutschland GmbH, Im Langel 26, 59872 Meschede, Germany

For the implementation of the ElektroG (return and disposal of electrical and electronic equipment), we take back our devices. They will either be recycled by us or disposed of according to legal requirements via a recycling company. Alternatively, you can hand in your old devices at designated collection points.

WEEE Registration No. DE69278128

PCE Instruments Contact Information

Germany
PCE Deutschland GmbH
Im Langel 26
D-59872 Meschede
Deutschland
Tel.: +49 (0) 2903 976 99 0
Fax: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch

United Kingdom
PCE Instruments UK Ltd
Trafford House
Chester Rd, Old Trafford
Manchester M32 ORS
United Kingdom
Tel: +44 (0) 161 464902 0
Fax: +44 (0) 161 464902 9
info@pce-instruments.co.uk
www.pce-instruments.com/english

The Netherlands
PCE Brookhuis B.V.
Twentepoort West 17
7609 RD Almelo
Nederland
Telefoon: +31 (0)53 737 01 92
info@pcebenelux.nl
www.pce-instruments.com/dutch

France
PCE Instruments France EURL
2, rue Georges Kuhnmunch
67250 Soultz-sous-Forêts
France
Tel.: +33 (0) 972 35 37 17
Fax.: +33 (0) 972 35 37 18
info@pce-france.fr
www.pce-instruments.com/french

Italy
PCE Italia s.r.l.
Via Pesciatina 878 / B-Interno 6
55010 Loc. Gragnano
Capannori (Lucca)
Italia
Telefono: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano

United States of America
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter / Palm Beach
33458 FL
USA
Tel: +1 (561) 320-9162
Fax: +1 (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/us

Spain
PCE Ibérica S.L.
Calle Mula, 8
02500 Tobarra (Albacete)
España
Tel.: +34 967 543 548
info@pce-iberica.es
www.pce-instruments.com/espanol

Turkey
PCE Teknik Cihazları Ltd.Şti.
Halkalı Merkez Mah.
Pehlivan Sok. No.6/C
34303 Küçükçekmece - İstanbul
Türkiye
Tel: 0212 471 11 47
Faks: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish

Denmark
PCE Instruments Denmark ApS
Birk Centerpark 40
7400 Herning
Denmark
Tel.: +45 70 30 53 08
kontakt@pce-instruments.com
www.pce-instruments.com/dansk