Manuals+

ZEISS DTC 3/25 | 3/35 | 4/50

Removal Instructions of the Accumulator for Recycling Purposes

Safety Instructions

The device contains a lithium-ion accumulator, therefore appropriate safety measures must be applied:

Steps for Removing the Accumulator

The following steps detail the process for removing the accumulator:

  1. To remove the battery, loosen the four Torx screws at the front of the objective.
  2. Disconnect the cables connecting the electronic boards and disconnect the lens section from the rest of the system.
  3. Now loosen the four screws (A) that fix the battery holder in the housing.
  4. Remove the cable (B) of the charging electronics from the upper board.
  5. Pull the battery holder including battery and charging electronics out of the housing.
  6. Remove the charging electronics (3 screws from the top) from the battery compartment and disconnect the connector (C) of the battery from the circuit board.
  7. Push the battery out of the battery compartment from the side.
Diagram 1: Front view of the objective lens showing the locations of four Torx screws.
Diagram 2: Internal view of the device after lens removal. Key components include:
  • Battery holder secured by four screws labeled (A).
  • Cable (B) for charging electronics connected to the upper board.
  • Connector (C) for the battery, attached to the circuit board.
  • The battery holder containing the battery and charging electronics.
  • Internal wiring and circuit boards.
Models: DTC 3-25 Thermal Imaging Clip, DTC 3-25, Thermal Imaging Clip, Imaging Clip, Clip

PDF preview unavailable. Download the PDF instead.

manual-zeiss-dtc-3-removal-instructions Acrobat Distiller 23.0 (Windows)

Related Documents

PreviewZEISS DTC 4 | 50 Safety and Regulatory Information
Comprehensive safety instructions, intended use, legal compliance, and disposal guidelines for the ZEISS DTC 4 | 50 thermal imaging device.
PreviewZEISS DTC 3/38 | 3/25 Gebrauchsanleitung
Anleitung zur Verwendung des ZEISS DTC 3/38 und 3/25 Wärmebildvorsatzgeräts. Enthält Informationen zu Installation, Bedienung, technischen Daten, Fehlerbehebung und Wartung.
PreviewZEISS Quality Assurance Solutions for eMobility: Enhancing Safety and Performance
Discover ZEISS's comprehensive quality assurance solutions for the eMobility sector, covering batteries, electric motors, fuel cells, automotive electronics, and transmissions. Enhance safety, performance, and reliability with advanced metrology and inspection technologies from ZEISS.
PreviewACCUJECT 3.0-1P IOL Injector Set with ZEISS CT SPHERIS & CT ASPHINA - Handling Instructions
Detailed handling instructions for the ACCUJECT 3.0-1P injector set, compatible with ZEISS CT SPHERIS 204 and ZEISS CT ASPHINA 404 intraocular lenses. Learn how to safely and effectively use this medical device for ophthalmic surgery.
PreviewZEISS DTI Thermal Imaging Devices: Safety & Regulatory Information
Essential safety and regulatory guide for ZEISS DTI thermal imaging devices (DTI 3/25 GEN 2, 3/35 GEN 2, 4/35, 4/50). Covers handling, battery, power, disposal, and compliance.
PreviewZEISS DTI 6/20 & 6/40 Safety and Regulatory Information
Comprehensive safety, handling, battery, power supply, intended use, and regulatory information for the ZEISS DTI 6/20 and DTI 6/40 thermal imaging devices. Includes disposal guidelines and FCC/IC compliance.
PreviewZEISS Pickup Order Form
Official pickup order form for ZEISS logistics services, detailing shipment information, recipient and billing addresses, and preferred shipping options.
PreviewZEISS Cataract Workflow: Seamless Integration for Ophthalmic Surgery
Explore the ZEISS Cataract Workflow, a comprehensive solution connecting devices, data, and applications for seamless integration from patient assessment to surgical treatment and follow-up in ophthalmology.