M10 Wireless Headset

Model: M10

Product Diagram

Product Model: M10

Product Parameters: Laboratory test data, specific data is subject to actual usage.

Headset Configuration:

Indicator light
Touchpad
The horn
Charging contact

Charging Bin Configuration Parameters:

Horn power: 5mW
Charging time: about 1 hour
Input voltage: 5V/500mAh

Headset Parameters:

Running time: about 4 hours
Operation mode: touch control
Effective distance: ≥10 m
Call time: approximately 4 hours
Charging time: about 1 hour
Horn: copper ring 8mm
Version: 5.3

Packing List

1 x Charging box
1 x Left and right earphones
2 x Large ear cap
1 x Product Manual
1 x Charging cable

Wearing Instructions

Open the cover of the charging bin, take out the right earphone, gently place the speaker end of the earphone into the ear canal of the right ear, and then gently sway the earphone until it is stable. Wear the left earphone in the same way.

Mode of Operation

1. Power On

(1) Open the charging chamber cover, take out the earphone, it will power on automatically, and the earphone breathing light will flash.
(2) When the headset is off, touch and hold the touch pad of the headset for 3 seconds to power on.

2. Power Off

(1) Put the earphone back into the charging bin and close the cover. The earphone will power off and charge automatically.
(2) When the headset is on, touch and hold the touch pad of the headset for 5 seconds to power off.

Binaural Pairing and Connection

Open the charging compartment cover, take out the earphones, and they will power on automatically. The earphone breathing light will flash, entering automatic pairing mode. When one earphone's light turns off or flashes slowly, the pairing is successful.
Open the device's wireless list and search for "TWS".
Click "TWS" to connect. If the connection fails, place the earphones back into the charging bin, close the cover, and repeat the above steps.
When both ears move away from the normal connection distance with the device, the headset will enter the state of reconnecting to the Bluetooth headset. If reconnection is not successful within 5 minutes, both ears will automatically shut down.
After the headset is powered on and before connecting to a mobile phone, triple-tap either earphone to automatically switch between Chinese and English languages (this function is not available for single Chinese or single English products).
After the device is connected for the first time, the headset will automatically connect to the last paired device when it restarts next time.

Binaural Touch Operation

Play/Pause Music: Under music status, tap the L/R earphone once.
Play Previous Song: Under music status, tap the L earphone twice.
Play Next Song: Under music status, tap the R earphone twice.
Volume Up: Under music status, triple-tap the L earphone.
Volume Down: Under music status, triple-tap the R earphone.
Answer Phone Call: When a call comes in, tap the L/R headset once.
Refuse Call: When a call comes in, long-press the L/R earphone for 2 seconds.
Voice Assistant: In the connected state, long-press either earphone for 1.5 seconds and release to enter voice assistant mode.

Charging

Earphone charging: Place the earphones into the charging box to charge automatically. The charging indicator light will be red and turn off when fully charged.
Charging box low power: The single digit of the digital tube will flash.
Charging box charging: The single digit of the digital tube will flash, and it will stop when it reaches 100%.

F&Q (Frequently Asked Questions)

Q: How come only one earphone has sound?
A: Place both earphones back into the charging bin simultaneously, close the cover to charge, and then take them out to check if the dual-ear mode is restored. If not, restoring to factory settings should resolve the issue.
Q: The phone cannot connect to the headset?
A: Delete the paired "M10" from your mobile phone, and then attempt to pair and connect again.
Q: Why is there no sound during music playback/calls?
A: For Android phones, go to the connection record on your phone, click the settings icon on the right, deselect both audio options, and then re-select them. For Apple phones, go to Settings > General > Accessibility > Audio Call Mode and select "Automatic". If it is already set to "Automatic", change it to another option and then back to "Automatic". If the issue persists, delete the pairing record and reconnect.
Q: Why is there stuttering/disconnection?
A: If there are many Wi-Fi devices, 4G signals, high-power appliances, or other sources of interference around when using the headphones, stuttering or disconnection may occur. Changing the environment or re-pairing the connection can restore normal functionality.

Matters Needing Attention

1. Please use a charger with safety certification from a reputable source for charging.
2. Adjust the volume appropriately when using headphones to avoid hearing damage.
3. Use the product correctly and avoid high falls or heavy extrusion.
4. Children should be supervised by adults during use to prevent accidental ingestion.
5. Keep away from extreme environments such as high temperatures or humidity.
6. Do not disassemble this product.

Special Announcement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

	M10 TWS Earphones User Manual and Specifications Comprehensive guide for M10 TWS earphones, covering specifications, pairing, operation, maintenance, safety, and warranty information.
	M10 Self-Cleaning Robot Vacuum and Mop Owner's Manual Owner's manual for the M10 Self-Cleaning Robot Vacuum and Mop, providing safety information, product introductions, usage instructions, routine maintenance, troubleshooting, and FAQs.