Altronix Home
User Manual for Altronix models including: PD8ULCB UL Listed Sub-Assembly Power Distribution Module, PD8ULCB, UL Listed Sub-Assembly Power Distribution Module, Power Distribution Module, Distribution Module
Altronix PD8ULCB | Power Distribution Module, 8 PTC Outputs
File Info : application/pdf, 1 Pages, 502.06KB
DocumentDocumentPD8ULCB UL Listed Sub-Assembly Power Distribution Module Overview: PD8ULCB is a UL Listed Sub-Assembly power distribution module designed to convert a single AC or DC input into eight (8) PTC protected Class 2 Rated power-limited auto-resettable outputs. Specifications: Agency Listings: · UL Listed Sub-Assembly for UL 294* Access Control System Units. *Access Control Performance Levels: Destructive Attack - N/A (sub-assembly); Endurance - IV; Line Security - I; Stand-by Power - I. UL 603 Power Supplies for Use with Burglar Alarm Systems. UL 1481 Power Supplies for Fire Protective Signaling Systems. · cUL Listed: General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983. Power Supplies for Burglar Alarm Systems ULC-S318-96. Input: · 12VDC or 24VDC, up to 10A. · 24VAC or 28VAC, up to 12A. Outputs: · Four (4) individually fuse protected outputs @ 2.5A per output max. current (total output current should not exceed max. current rating of power supply employed). PTC Ratings: · PTCs are rated @ 2A/250V. Visual Indicators: · Power On green LED indicator. Board Dimensions (W x L x H approximate): 3.25" x 5.25" x 1" (82.6mm x 133.4mm x 25.4mm). Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only and should be installed by qualified personnel. 1. Refer to Sub-Assembly Installation Instruction for mounting Rev. MS020119. 2. Mount PD8ULCB in the desired location/enclosure (mounting hardware included). 3. Connect the desired power supply output to the terminals marked [INPUT] (Fig. 1). Note: Left terminal is NEG. () and right terminal is POS. (+) (Fig. 1). 4. Measure output voltage before connecting devices. This helps avoiding potential damage. 5. Connect devices to be powered to the terminal pairs 1 to 4, marked [1P - 1N] through [4P - 4N]. All terminals with common suffix P "1P, 2P..." are the same polarity. Note: This product is a UL Listed Sub-Assembly for use with Altronix UL Listed power supplies as indicated in the installation manuals for the power supply. NOTE: DC outputs are power-limited. F1 F2 F3 F4 F5 F6 F7 F8 CAUTION: Do not expose to rain or moisture. (#P) Positive DC outputs (#N) Negative DC outputs 1 2 3 4 P 56 7 8 FUSED POWER OUTPUTS PD8ULCB POWER DISTRIBUTION UNIT D1 R1 LED N COMMON POWER OUTPUTS NP Fig. 1 DC Negative () DC Positive (+) Input Input Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty IIPD8ULCB - Rev. 020119 D12U MEMBER