Defiant Smart Lock and Smart Plug Installation and User Guide

Warranty Information

Limited Lifetime Mechanical and 1 Year Electronic Warranty

This product is warranted against defects in workmanship or materials for the original purchaser's lifetime (mechanical) and 1 year (electronic). To obtain service, return the product to the store of purchase. This warranty is limited to the original retail purchaser and does not cover consequential or incidental damages. Some states may have different warranty provisions.

Smart Plug Warranty

This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. This guarantee does not include normal wear and tear.

Certifications: Intertek 5003280

Wireless Protocol Information

The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. Apple and Apple logos are trademarks of Apple, Inc. App Store is a service mark of Apple Inc. Google, Google Play and the Google Play logo are trademarks of Google LLC. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

Smart Plug QDID: 153778 and 141499

Lockset QDID: 175971

FCC and IC Regulations

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard. Operation is subject to conditions that this device does not cause harmful interference and accepts any interference received. Modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance: Tested and complies with Class B digital device limits for residential installations. May cause radio or television interference if not installed correctly. Measures to correct interference include reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a technician.

IC Compliance: Complies with IC RSS-102 radiation exposure limits. Maintain a minimum distance of 20cm between the radiator and any part of your body.

IC ID: 10256A-LA02303B

HVIN: LA02303B

Supplier's Declaration of Conformity: 47 CFR § 2.1077 Compliance Information

Responsible Party: Fu Hsing Americas, Inc, 1424 Buford Business Blvd NE Ste 100 Buford, GA 30518, 1-770-441-2830

Important Notice & Safety Information

Read this notice before installing, using, or servicing the product. Improper use may cause damage or loss.

Installation Precautions:

• Contact your local service provider regarding door preparation.
• Do not remove or replace parts during installation, as this may void the warranty.
• Not for use on an Emergency Exit.

Product Use Precautions:

• Always use authentic alkaline batteries. Damage from unauthentic batteries is the user's responsibility.
• The product contains mechanical and electronic components sensitive to water, physical impact, and electric shock. Use with care.
• Do not disassemble the product without advice from a qualified service provider; unauthorized disassembly voids the warranty.
• Refer to the troubleshooting section or contact customer service for assistance.
• Remove all batteries simultaneously and replace with new ones of the same type and size.
• Preserve battery and lock life by removing batteries when the lock is unused for over 3 months.

Service and Maintenance:

• Seek advice from your local service provider for cleaning, moving, or maintaining the product.
• Information is subject to change without notice.

Smart Plug Safety:

• Use with a 10A circuit breaker upstream.
• For indoor use only. Do not use in wet locations.
• The total current limit is 10 Amps. Do not exceed this limit to avoid damage.
• The Smart Plug has an electric shock hazard if a direct short is created on the output. Contact Customer Support for service.

General Safety:

• Ensure all parts are present before installation. If parts are missing or damaged, do not proceed. Contact Customer Service or visit www.homedepot.com.
• Do not use an electric drill or screwdriver to tighten screws.

Package Contents

Hardware Contents (Actual Size)

• AA: 1-13/16" (46 mm) Mounting Bolt (2)
• BB: 13/16" (20 mm) Screw (2)
• CC: 3/4" (19 mm) Wood Screw (4)

Installation Instructions

Before Proceeding:

• Check Door Dimensions: Ensure compatibility with 1-1/2" (38 mm) or 1" (25 mm) bore holes, and backsets of 2-3/8" (60 mm) or 2-3/4" (70 mm). An adapter collar is available for 35 mm - 51 mm holes.
• If your door requires drilling, familiarize yourself with safe drilling practices and door preparation steps.

Step 1: Drill Door For New Installation

Use the provided TEMPLATE to mark the door for drilling holes and chiseling the mortise. If your door already has holes, skip to Step 2.

Drilling: Drill from both sides of the door to prevent wood splitting. Ensure correct hole diameters (2-1/8" (54 mm) or 1-1/2" (38 mm) for the main hole, and 1" (25 mm) or 1-1/2" (38 mm) for the edge bore hole).

Step 2: Install the Latch and Strike

1. Choose Faceplate: Select the appropriate faceplate for your door's edge.
2. Set Latch Backset: Adjust the latch for a 2-3/8" (60 mm) or 2-3/4" (70 mm) backset as needed. The latch is pre-set for 2-3/8".
3. Install Latch: Insert the latch into the edge of the door. Ensure it is flush. Use screws (CC) to tighten. For drive-in latches, tap flush.
4. Install Strike Plate: Prepare the door jamb by using the strike plate as a template to drill holes and chisel the mortise. The strike plate must fit flush with the door jamb surface. Ensure alignment and clearance for the bolt.

Step 3: Install Electronic Deadbolt

1. Install Lock Assemblies: Rotate the torque blade to fit into the latch. Ensure the latch bolt is in the retracted position. Route the cable underneath the latch.
2. Fasten Mounting Plate: Secure the mounting plate to the door. Slide the cable through the notch in the mounting plate. The bulged part of the mounting plate should face the door. Do not leave the key in the cylinder during installation.
3. Connect Cable: Connect the cable firmly into the connector port on the interior assembly. The metal connector side should face outward. Arrange the cable as shown in the diagram.
4. Install Interior Assembly: Insert the torque blade into the interior slot of the thumbturn. Ensure the thumbturn is in the vertical position. Insert screws (BB) and tighten.

Step 4: Smart Plug Installation

1. Insert the Smart Plug into a wall socket. The plug is now ready for Wi-Fi setup.
2. Plug your desired electrical appliance into the Smart Plug.
3. Note: Do not insert plugs in a row. Keep the Smart Plug parallel to the door edge.

Step 5: Program Lock

1. Download Hubspace App: Get the app from the App Store or Google Play Store.
2. Account Setup: Create an account or sign in.
3. Add Lock: Tap the '+' button in the upper right corner to add your lock. Scan the QR code on the lockset or in the Lock Quick Start Guide. The lock will perform a direction check automatically.
4. Add Smart Plug: Tap the '+' button to add your plug by scanning the QR code on the plug or in the Smart Plug Quick Start Guide. If the QR code cannot be scanned, enter the code manually via the 'Enter Code' option.
5. Wi-Fi Gateway Setup: Set up your Smart Plug as a Wi-Fi Gateway for remote control. Tap 'Smart Plug' from the homepage in the Hubspace app and find 'Wi-Fi gateway support to another device'. This enables remote access to your lock via your phone.
6. Voice Assistant Setup: Connect your smart plug to Google Home and Alexa through the Hubspace app, or sign in to the respective apps to connect your Hubspace devices.

Hubspace App Quick Start Guide Notes:

• Bluetooth connection range is approximately 30 feet (10 meters), but can vary based on obstacles. For best connectivity, place the Smart Plug near the lock.
• The device only connects to 2.4GHz networks; 5GHz is not supported. The Hubspace app displays compatible Wi-Fi networks.
• If your Wi-Fi network is not visible, check router settings or move the product closer to the router.
• For missing or unscannable QR codes, press and hold the 'SET' button for 5 seconds to discover your lock.

Lock Indicator Lights

Smart Plug LED States

Smart Plug Specifications

• Input: 120VAC, 60Hz
• Output: 120VAC, 60Hz, 10A Maximum load, Resistive
• Network Wireless Type: 2.4GHz, IEEE 802.11b/g/n
• Operating Temperature: 32°-104° F (0°-40° C)
• Operating Humidity: 5-85% RH, Non-condensing
• Certification: FCC, IC, ETL

Care and Maintenance

1. Remove locks or do not install locks prior to painting your door.
2. Periodically clean with mild soap and a soft cloth only.
3. Do not use abrasives, chemicals containing alcohol, benzene, or acids. Avoid sharp or abrasive objects for cleaning.
4. Do not allow water or liquids into the lockset during installation.

Template Instructions

Note: Double-check product for correct hole sizes.

Drill a 1" (25 mm) diameter hole at the center of the door edge.

Fold the template and place it on the door edge.

Backset Options: 2-3/8" (60 mm) or 2-3/4" (70 mm).

Hole Diameter Options: 2-1/8" (54 mm) or 1-1/2" (38 mm).