ytamura

Sales Bulletin FishHunter™ Drive with SUZUKI Outboards

FishHunter™ Drive with SUZUKI Outboards - Quality Marine Electronics

1. FishHunter™ Drive with SUZUKI Outboards FishHunter™ Drive offers unique boat control features achieved through joint development with FURUNO and SUZUKI. In combination with the NAVpilot-300 and one of the compatible SUZUKI outboard engine models, the following functions are available. No Function Overview 1 Speed Control The boat will run at a preset speed by automatically adjusting the ...

[PDF] Sales Bulletin FishHunter™ Drive with SUZUKI Outboards

FishHunter™ Drive offers unique boat control features achieved through joint development with FURUNO ... The NAVpilot-300 can be set to STBY from the GP-1871F/ ...


File Info : application/pdf, 8 Pages, 471.62KB

PDF preview unavailable. Download the PDF instead.

NAVpilot-300-SUZUKI-FishHunter
Sales Bulletin
Attention: All Furuno Distributors/Subsidiaries SB No: FSB22-0003 Number of Pages: 8
Date: February 8, 2022

Model: NAVpilot-300

FishHunterTM Drive with SUZUKI Outboards
Preliminary Introduction

1. FishHunterTM Drive with SUZUKI Outboards 2. FishHunterTM Drive ­ Features
2.1. Speed Control 2.2. Route SmoothingTM 2.3. Auto Stop on Arrival and Stay Fixed 2.4. Point LockTM

INDEX
2.5. SABIKITM Lock 3. Display Devices
3.1. Point LockTM and SABIKITM Lock 3.2. Route Output 4. NAVpilot-300 Software Versions 5. Tips ­ Conventional FishHunterTM Mode

1

1. FishHunterTM Drive with SUZUKI Outboards

FishHunterTM Drive offers unique boat control features achieved through joint development with FURUNO and SUZUKI. In combination with the NAVpilot-300 and one of the compatible SUZUKI outboard engine models, the following functions are available.

No

Function

Overview

1 Speed Control The boat will run at a preset speed by automatically adjusting the engine RPM. (See

Section 2.1)

2 Route

Speed will be reduced to smoothly turn at a waypoint when navigating on an active route

SmoothingTM with NAV mode. (See Section 2.2)

3 Auto Stop

The boat will stop and remain fixed around the final destination on arrival. (See

on Arrival

Section 2.3)

4 Point LockTM

The boat will remain fixed around a specific spot. (See Section 2.4)

5 SABIKITM Lock In addition to conventionally available SABIKITM mode, the throttle is also controlled

automatically between Reverse and Neutral. (See Section 2.5)

System Requirement

The following table shows required items for the FishHunterTM Drive. See Section 4 for details of interconnection.

Item

Requirement

Engines compatible with Suzuki Precision Control:

Compatible Suzuki

DF140BG / DF115BG

DF300AP / DF250AP

Outboard Models

DF200AP

DF350A / DF325A*/ DF300B

Engine

DF175AP / DF150AP

(*DF325A not solid in the US)

Supported Qty

1 to 4 (max.), for boat length of 20 to 40 ft

Others

For other components related to engine such as gateway, remote controller, etc., contact SUZUKI representatives for appropriate items onboard.

Autopilot

NAVpilot-300 (See Section 6 for software versions)

NavNet TZtouch3 series ­ TZT9F/12F/16F/19F ver. TBD

NavNet TZtouch2 series ­ TZT2BB ver. TBD

Display Device

GP-1871F/1971F ver. TBD SMD series ­ SMD7/9 ver. TBD and SMD12/16 v6.17

for active route output to SUZUKI engines, autopilot mode display, etc.

(See Section 3 for details)

Navigation Data

Heading, position, speed sensors for autopilot control (SCX-20 recommended, rather than built-in GPS)

2. FishHunterTM Drive ­ Features
2.1. Speed Control
Boat speed is controlled to run at a preset speed between 5 to 50 knots by automatically adjusting the engine RPM.
2.2. Route SmoothingTM
When navigating with NAV mode on an active route with multiple waypoints, there are some cases where the boat deviates too much from a waypoint or route leg unless the arrival circle is properly set to match with the boat characteristics. With the Route SmoothingTM function turned on, boat speed will be automatically reduced to smoothly turn at a waypoint, without overshooting.
Note: The speed adjustment works when the turning angle to the next leg is over 60°.
2.3. Auto Stop on Arrival and Stay Fixed
When arriving at the final destination with NAV mode, you had two options in the past: Go straight or keep running around the point. With the new function, the boat can automatically stop at the final destination. In addition, the boat can remain fixed around the final destination with Point LockTM mode turned on. (See Section 2.4 for Point LockTM function.)
2.4. Point LockTM
You may want to remain fixed around a specific location to keep casting a lure to a structure such as a pier. However, it is difficult to focus on fishing because the boat will drift away unless you consistently steer the helm and adjust the throttle. The Point LockTM function will help the boat to remain fixed around a specific spot by controlling the rudder and clutch.

2.5. SABIKITM Lock
The original SABIKITM mode was introduced in 2015 starting with the NAVpilot-711C, as described in Sales Bulletin FSB15-0004. This function has also been made available with the NAVpilot-300. With the conventional SABIKITM mode, while the helm was steered automatically, you needed to shift the throttle down (for Reverse) and up (for Neutral). This effectively reduced the load of captains and helped them concentrate on fishing.
New SABIKITM Lock mode offers additional benefits. The throttle will be adjusted automatically between Reverse and Neutral while the boat is reversed, freeing you to focus 100% on jigging and other vertical fishing!

Automatically controlling the boat in reverse

3. Display Devices

The following displays networked via NMEA2000 can show the steering mode of NAVpilot-300, as well as other functions.

Display Device Multi Function Display Multi Function Display GPS Plotter w/Fish Finder Engine Gauge

Model NavNet TZtouch3 series ­ TZT9F/12F/16F/19F ver. TBD NavNet TZtouch2 series ­ TZT2BB ver. TBD GP-1871F/1971F ver. TBD SMD series ­ SMD7/9 ver. TBD and SMD12/16 v6.17

The following table summarizes the compatible functions on each display device.

No

Function

1 Point LockTM Display 2 SABIKITM Lock Display 3 SABIKITM Lock Adjustment 4 Turn Menu Setting 5 Route Output for 3 waypoints

GP-1x71F SMD7/9

Ver. TBD Ver. TBD









­

­

­

­





SMD12/16 V6.17    ­ 

TZT2BB Ver. TBD
   ­ 

TZT9F/12F/16F/19F Ver. TBD    ­ 

3.1. Point LockTM and SABIKITM Lock
GP-1871F/1971F and SMD7/9
While Point LockTM and SABIKITM Lock modes are activated with the NAVpilot-300, the GP-1871F/1971F and SMD7/9 show these screen modes on the Instrument page.
Notes: Point LockTM and SABIKITM Lock modes can be turned on from the NAVpilot-300 only. The NAVpilot-300 can be set to STBY from the GP-1871F/1971F or SMD7/9.
NavNet MFDs and SMD12/16
While Point LockTM and SABIKITM Lock modes are activated with the NAVpilot-300, the TZT2BB, TZT9F/12F/16F/19F, and SMD12/16 show these screen modes on the Data Box and Instrument page.
Point LockTM Mode: Point LockTM mode can be turned on from the NAVpilot-300 only. The NAVpilot-300 can be set to STBY from the NavNet MFDs and SMD12/16 by tapping on the Autopilot Window.
SABIKITM Lock Mode: SABIKITM Lock mode can be turned on from the NAVpilot-300 only. The set course can be adjusted with the NavNet MFDs and SMD12/16 by tapping on arrow icons in steps of 1° or 10°. The NAVpilot-300 can be set to STBY from the NavNet MFDs and SMD12/16 by tapping on the Autopilot Window.
3.2. Route Output
Three (3) waypoints are output via PGN: 129285 for an active route. (Previously, only two (2) waypoints were output.) This output will help the NAVpilot-300 to adjust the turning speed at each waypoint with NAV mode.

4. NAVpilot-300 Software Versions

The following table shows the details of NAVpilot-300 software versions to be compatible with the FishHunterTM Drive.

Release Schedule: May 2022

Unit FAP-3011 (Control Unit)
FAP-3012 (Processor Unit) GC-001 (Gesture Controller)

Block App Boot
Main CPU Booter Main CPU Loader Main CPU App BLE RC-Block

New 01.10 01.06 01.09 01.05 01.03 01.07 02.02

Previous 01.09 01.05 01.08 01.04 01.02 01.06 02.01

5. Tips ­ Conventional FishHunterTM Mode
The conventional FishHunterTM mode offers unique navigation features for fishing with the NAVpilot-300 and NAVpilot-700 series. As an example, when you find a school of fish with a Fish Finder or a flock of birds with a Radar, drop a point on that target and feed it to the NAVpilot as TLL (Target L/L). The NAVpilot can maneuver in an orbit, spiral, figure-eight, or zigzag shape around the target. While the FishHunterTM "Drive" mode introduced in this document is available in combination with NAVpilot-300 and specific SUZUKI outboards, these steering options with FishHunterTM mode are available with the NAVpilot-300 and NAVpilot-711C, without specific engine types required. Maneuvering options:
The following illustrations are extracted from the Operator's Manual of NAVpilot-300 to show how the boat is steered.
Orbit Turn
Spiral Turn
Figure-eight

Zigzag
--- END --- All brand and product names are registered trademarks, trademarks or service marks of their respective holders.



References

Microsoft Word for Microsoft 365