Manage your woohlab galaxy projector with simple voice commands via Alexa smart speaker. First, power on the device, and you can say "Alexa, discover devices" And you can say like this:
Double-check that you entered the correct Wi-Fi password during the Wi-Fi set-up process. Place the projector in close proximity to the Wi-Fi router, then try reconnecting. Try connecting the projector with a smartphone hotspot to check if your home network is work-ing properly. Cannot connect to Alexa smart speaker
Galaxy Projector User Manual Product Usage Video Directions for Use Connect the included power cable to the power port on the device. Plug the opposite end into a power outlet. When plugged into an outlet, the ambient light on both sides of the projector will briefly illuminate. Press the Power button to turn on the projector. Once the device is powered on for the first time, the ambient lights on both sides will gradually light up one by one until they are fully lit. A projection of pulsating stars will then appear along with slowly rotating clouds. Download the Woohlab mobile app on your smartphone and create an account. Available on the App Store IOS: Download the Woohlab app on App Store. ANDROID APP ON Andorid: Download the Woohlab app on Google Play. play Follow the steps in the Woohlab app to connect your device. Your phone's Bluetooth must be turned on in order to find and properly connect to the galaxy projector. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Notes: (1)If you can't connect your phone to the projector, press and hold the power button on the device. Continue holding while the ambient lights on both sides flash 3 times and then illuminate for 2-3 seconds before powering down. This will reset the Bluetooth pairing setting. Next, tap "Try Again" on the Woohlab app try to connect again. (2)When connecting to Wi-Fi, be sure you're connecting to a 2.4 GHz network. (5GHz is not supported.) When prompted, enter the correct Wi-Fi password to connect. If you don't want to connect to Wi-Fi during the initial setup, you can choose to skip it. Wi-Fi connections can be established later in the settings section of the app. BUTTON CONTROLS Rhythm Button Power button Timer Button Mode Button Music Rhythm Indicator Microphone Brightness Button Timer Indicator Type C Port Reset Hole Power Button Press the Power button to power on /off the device. Mode Button Press the Mode button to change light effects. Rhythm Button Press the Rhythm button to enable music rhythm mode. When the device is placed next to a music player, the light effects will follow the beat of any audible music. Press the power button to exit music rhythm mode. Music Rhythm Indicator When the music rhythm function is turned on,the timer indicator will light up. Microphone In the music rhythm mode, the built-in microphone will collect sound signals from music played nearby. The device will then display light effects according to the rhythm of the music. Timer Button When the Timer button is pressed, the star projector will automatically turn off after 1 hour. You can also modify the default timing setting (1 hour) in the Woohlab app. Brightness Button Adjust the brightness of pattern lights, laser lights and ambient lights. Three brightness levels are available: 30% - 60% - 100%. Timer Indicator When the timer function is turned on, the timer indicator will light up. Reset Hole Insert a paperclip into the hole and press and hold the button for 5 seconds.The ambient light on both sides will flash green 5 times and then illuminate green for 2-3 seconds before powering down. This will restore the device to factory settings. Replace the pattern drawer Right ambient light Pattern light Star Projector base Replace the pattern drawer Try changing the pattern for different projection effects. Left ambient light Laser light APP CONTROL FUNCTIONS On/Off Button Slide the On/Off Button to turn the pattern light on or off. Choose any light color from the Color Wheel by dragging the A and B icons. Drag the RGBW color bar of the Color Sliders to select a color combination. Pattern Light Color Setting The pattern light contains two LEDs (A & B). So you can choose any light color from the Color Wheel and Color Sliders options. Sliders Color Sliders Brightness 0-100% adjustable. Color Wheel Rotational Speed 0-100% adjustable. Mode: 3 pattern light modes are available: Static, Breathe and Gradient.The Breathe and Gradient mode options can be customized with up to 8 different color combinations. R: Red Color G: Green Color B: Blue Color W:White Color On/Off Button Slide the On/Off Button to turn the laser light on or off. Brightness 0-100% adjustable. Mode 2 laser light modes are available: Static and Breathe. On/Off Button Slide the On/Off Button to turn the ambient lights on or off. Brightness 0-100% adjustable. Theme Choose from one of multiple colors themes. DIY Colors The ambient lights on both sides of the projector have a total of 6 LEDs. Each LED can be customized to display a different color. Multiple music rhythm modes are available, and the sensitivity can be adjusted right in the Woohlab app. When the projector is placed next to a music player, the light effects will follow the beat of any audible music. OTHER FUNCTIONS You can save the currently settings of Pattern / Laser / Ambient lights to Scenes - My favorite. Here, you can adjust the timer setting. For example, if you select "1 hour" and then "Save," the timer indicator on the device will light up, and the galaxy projector will automatically turn off after 1 hour. You can customize the start and end times of the device by creating a program. The customized programs you've created are available in Scenes - My favorite. Select the Scenes icon to choose different light effects. Two options are available: Basic (factory-set light effects) and My Favorites (light effects customized by you). Manage your woohlab galaxy projector with simple voice commands via Alexa smart speaker. First, power on the device, and you can say "Alexa, discover devices" And you can say like this Content Device Rename Power On Power Off Color Adjustment Increase Brightness Reduce brightness Timing to turn on/off Voice Orders Alexa, change the name of "XXX" to "galaxy projector" Alexa, turn on "galaxy projector" Alexa, turn off "galaxy projector" Alexa, turn "galaxy projector" to red Alexa, increase brightness of galaxy projector Alexa, reduce brightness of galaxy projector Alexa, turn on/off galaxy projector after one hour Note: "XXX"means the name after Alexa Echo is connected to the device. Alexa Echo Supported Models: Series Echo Show Echo dot Echo Echo Plus Models Echo Show 1st-gen Echo Show 5 1st-gen Echo Show 8 1st-gen Echo Show 15 Echo Dot 2nd-gen Echo Dot 4th-gen Echo 2nd-gen Echo 4th-gen Echo Plus 1st-gen Echo Show 2nd-gen Echo Show 5 2nd-gen Echo Show 8 2nd-gen Echo Dot 3rd-gen Echo Dot 5th-gen Echo 3rd-gen Echo Plus 2nd-gen Adapter Input Device Input Lighting Color Control Method Working Temperature AC 100-240V 5V 2A RGBICW Button,App,Voice Control -10º to 40ºC(14º to 104ºF) Woohlab APP-Setting-Share Device ,share and scan the QR code with Woohlab APP to allow multiple phones to control the device together. Read and follow the following safety instructions closely: The projector is not waterproof. Avoid exposing it to splashing or dripping water. Avoid excessive room temperatures. The projector can safely operate between -10º to 40ºC (14º to 104ºF). Avoid placing the projector near heat sources. Avoid placing the projector near potentially dangerous sources (e.g., candles, liquid objects). Do not allow children to install the projector alone. 1 Cannot connect to the Woohlab app Ensure that the projector is powered on. Check that Bluetooth is enabled on your smartphone. Otherwise, try connecting with another Bluetooth-enabled smartphone if available. When connecting for the first time, ensure the smartphone is near the device. If the connection still fails, press and hold the power button on the device. Continue holding while the ambient lights on both sides flash 3 times and then illuminate for 2-3 seconds before powering down. This will reset the Bluetooth pairing setting. Next, tap "Try Again" on the Woohlab app try to connect again. 2 Wi-Fi disconnected or failing to connect Ensure that the projector is powered on. Check that your Wi-Fi router is 2.4GHz. (5GHz is not supported.) Double-check that you entered the correct Wi-Fi password during the Wi-Fi set-up process. Place the projector in close proximity to the Wi-Fi router, then try reconnecting. Try connecting the projector with a smartphone hotspot to check if your home network is working properly. 3 Cannot connect to Alexa smart speaker Ensure your Wi-Fi connection is stable and working properly. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Having question with Woohlab? We can help! Contact us at support@woohlab.com Our team of experts can help you resolve any issues.Adobe Illustrator 24.0 (Windows) GPL Ghostscript 9.53.3