CAT CJ1000DXT 1200 Peak Amp Digital Jump Starter
Instruction Manual
About this Item
- 1000 Peak Battery Amp Jump-starter, 500 Instant Starting Amps, 200 Watt Integrated Power Inverter, 4 x 2 Amp USB Charging Ports, 12V DC Accessory Outlet.
- Can be used with any household extension cord, eliminating the need for an additional accessory power cord.
- Features a 2 LED Area light, one 120 Volt AC outlet, and four 2 Amp USB ports to provide power on the go for mobile phones, tablets, laptops, and more.
- Includes a 120 PSI air compressor with a heavy-duty brass tipped sure-fit nozzle for securely connecting to tires, sports equipment, and other inflatables.
- ETL Certified & CEC Compliant.
Controls and Functions
The CAT CJ1000DXT features several key components:
- Battery Status LED Indicators: Show the battery charge level.
- Battery Power Level Button: Used to check the battery's charge status.
- Jump Starter Power Switch: Turns the jump-starting function on or off.
- Area Light Power Switch: Controls the integrated 3-LED white area light.
- 3-LED White Area Light: Provides illumination.
- USB Charging Port: For charging USB devices (4 ports, 2A each).
- 12 Volt DC Accessory Outlet: Located under a protective cover, for 12V accessories.
- Three-Prong 120 Volt AC Outlet: Provides AC power (200W continuous).
- Translucent Inverter/USB Power Button and Inverter Power/Fault Indicator: Controls the inverter and USB functions, and indicates operational status or faults.
- Built-in 120 Volt AC Charger: Located under a protective cover, for recharging the unit.
- Air Pressure Gauge: Displays the air pressure from the compressor.
- Compressor Power Switch: Activates the air compressor.
- Air Hose and SureFit™ Nozzle Connector: Connects the air hose to the unit.
- Nozzle Adapters: Included for various inflation needs.
- Positive (+) Red Clamp: Connects to the positive terminal of the vehicle battery.
- Negative (-) Black Clamp: Connects to the vehicle's chassis or a suitable ground point.
Charging & Recharging
Lead-acid batteries require routine maintenance to ensure a full charge and long battery life. All batteries lose energy from self-discharge over time, and this loss is more rapid at higher temperatures. Therefore, batteries need periodic charging to replace energy lost through self-discharge.
When the unit is not in frequent use, the manufacturer recommends recharging the battery at least every 30 days to maintain its health and performance.
Jump-Starting a Vehicle
This Jump-Starter is equipped with an On/Off power switch. Once the connections are properly made, turn the switch on to jump-start the vehicle.
- Turn off the vehicle ignition and all accessories (radio, A/C, lights, connected cell phone chargers, etc.). Place the vehicle in "park" and set the emergency brake.
- Ensure the Jump-Starter power switch is turned to the OFF position.
- Remove jumper clamps from their storage tabs. Connect the red clamp first, then the black clamp.
- Procedure for jump-starting a NEGATIVE GROUNDED SYSTEM (negative battery terminal is connected to chassis) (MOST COMMON):
- 4a. Connect the positive (+) red clamp to the vehicle battery's positive terminal.
- 4b. Connect the negative (-) black clamp to the vehicle's chassis or a solid, non-moving, metal vehicle component or body part. Never clamp directly to the negative battery terminal or a moving part. Refer to the automobile owner's manual for specific grounding points.
- When clamps are connected properly, turn the Jump-Starter power switch to ON.
- Turn ON the vehicle ignition and crank the engine in 5-6 second bursts until the engine starts.
- Once the engine starts, turn the Jump-Starter power switch back to the OFF position.
- Disconnect the negative (-) engine or chassis clamp first, then disconnect the positive (+) battery clamp.
Key Features
- ⚙️ 500 Amp Jump Starter: Provides 500 Amp instant and 1000 peak battery amp starting power, helping to jump-start most 12V vehicles without the need for another vehicle.
- ? 2 Amp USB: Offers up to 2 Amps of USB charging power for phones, tablets, and electronic devices.
- ⚡ 200 Watt Power Station: Features one 120 Volt AC outlet to power tool chargers, laptops, and small personal electronic devices.
- ? 12V DC Outlet: Serves as an alternate 12 Volt power source for on-site emergencies and charging needs.
Specifications
- Boost Ampere: 12Vdc, 500A instantaneous
- Battery Type: Maintenance-free, sealed lead acid, 12 volt DC, 19Ah
- AC Input: 120Vac, 60Hz, 12W
- 120V AC Outlet: 120Vac, 60Hz, 200W continuous
- USB Port: 5Vdc, 2A
- DC Accessory Outlet: 12Vdc, 5A
- Compressor Maximum Pressure: 120 PSI
- LED Area Light: 3 white LEDs
Frequently Asked Questions (FAQ)
Led light is all the time how to turn off?
The LED stays on when charging. When fully charged, press the power button twice, and the LED will go off within a couple of seconds. The light also turns on anytime a function is used and stays on until the unit is turned off fully charged.
By mathew graham on December 30, 2020
How do you recharge it?
Plug the unit into an electrical outlet to recharge.
By Trisha G on November 18, 2020
Will it run a sump pump during a power outage?
The 120VAC outlet on this jump starter is rated at 200 watts maximum output. It will run a sump pump for approximately 30 minutes to 1 hour, depending on the maximum wattage draw, the state of battery charge on the jump starter, and the age/number of charge cycles on the internal battery.
How can you charge this with a solar panel?
To charge with solar panels, connect the solar panel to a charge controller, and then connect the charge controller to an inverter. Plug the jump box into the inverter. Note that solar panels are DC, and the jump box requires AC to charge. Solar panels require charge controllers to keep 12V batteries from overcharging. Inverters convert 12V DC to 120V AC (20 amp), which is then used to charge the jump box.
