Baby Trend Bounce N' Play 3-In-1 Activity Center PLUS

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered/removed serial number, invalidates all claims. Any property damage during installation is the sole responsibility of the end user.

Customer Service: 1 (800) 328-7363, Monday through Friday, 8:00 a.m. - 4:30 p.m. (PST). Return Authorizations are required prior to returning products. For complete warranty details, visit http://babytrend.com/pages/limited-warranty.

(Spanish: GARANTIA - NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND® PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION. La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la compra. Visite http://babytrend.com/pages/limited-warranty para conocer todos los detalles de la garantía.)

Safety Warnings & Important Information

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el producto. CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

⚠️ WARNING: Younger infants between 4 to 6 months are at a critical age for seated activity centers. Your child MUST ALREADY be able to hold their head upright and steadily unassisted before being placed in the activity center. DO NOT use if they cannot.

STRANGULATION HAZARD: Strings can cause STRANGULATION!

• DO NOT place items with a string around child's neck, such as hood strings or pacifier cords.
• DO NOT suspend strings over product or attach strings to toys.

The Stationary Activity Center is: Only for use by infants at least 4 months old and who can hold their head up unassisted.

FALL HAZARD: Babies can FALL from unit resulting in head injuries.

• Never leave child unattended. Always keep child in view while in product.
• Never use near stairs, stoves, heaters, fireplaces, swimming pools, or other dangerous areas. To avoid tip over, place product on a flat, level surface.
• NEVER lift this product with your child in it.
• NEVER place product on counter tops, tables, or any other elevated surface.

Discontinue seated use mode if child can climb out, begins to walk, reaches 30 pounds (13.5 kg) or 32 inches (80 cm) in height.

Do not use the stationary activity center if it is damaged or broken. Discontinue use if any part becomes damaged. Please contact customer service at 1-800-328-7363 for replacement parts or repairs.

❗ IMPORTANT: To ensure safe operation, follow these instructions carefully and keep them for future reference.

❗ IMPORTANT: Before assembly and each use, inspect for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.

❗ IMPORTANT: Adult assembly is required.

(Spanish: ADVERTENCIA: Los bebés más pequeños, entre 4 y 6 meses, están en una edad crítica... PELIGRO DE ESTRANGULAMIENTO... ¡Las cuerdas pueden causar estrangulamiento!... PELIGRO DE CAÍDA!... Los bebés se pueden CAER de la unidad...)

Parts List

Check that you have all the parts for this model before assembling the Activity Center.

• Seat and cover (Asiento y sostén)
• Tabletop (Tapa superior)
• 3 Table Legs (3 patas)
• Platform / Cover (Plataforma/Sostén)
• Rocket (Cohete)
• Mirror (Espejo)
• Spinning Ball (Pelota giratoria)
• Toy Bar (Barra de juguetes)
• Light and Sound Board (Tablero de luces y sonidos)

(Spanish: Verifique que tenga todas las piezas para este modelo antes de montar El Centro de Actividades.)

Assembly Instructions

Baby Trend Customer Service: 1 (800) 328-7363, Monday-Friday, 8:00 a.m. - 4:30 p.m. (PST). Return Authorizations are required.

(Spanish: BABY TREND® SERVICIO AL CLIENTE: 1 (800) 328-7363 Lunes a viernes entre 8:00 a.m. y 4:30 p.m. (PST). Un número de autorización es requerido antes de la devolución.)

Swivel Seat Mode

1. Insert each leg into the underside of the tabletop. Ensure the pin clicks into position.
2. If needed, align the seat with the center opening and press down firmly until the seat completely clicks into the tabletop. Rotate the seat to ensure the swivel function is active.
3. To attach and detach the seat cover, see step 7.

Seat Removal

1. To remove the seat, lift the tabletop to expose one of three tabs underneath. Detach one tab by pushing it off the tabletop.
2. From the top of the Table Top, use the edge of the seat to lift it off the tabletop.

Adjustable Platform Set Up

1. Underneath the tabletop, pinch and pull out the 3 small straps. Underneath the platform, unhook the 3 adjustment plates, pinch and pull out the 3 large straps.
2. With the smooth side up, align the platform to the front of the tabletop. Hook the adjustment plate to a small strap using the lowest hoop. Repeat for the rear straps.
3. To adjust the height, unhook the adjustment plate and move it through the next division of the strap.
4. ATTENTION: Always secure the straps when the platform is not in use. Refer to steps 4c and 4d.

Platform Positions

• Use level 1 for the highest position, level 2 for the middle position, and level 3 for the lowest position.
• NOTE: Always use the level that is most suitable for your child's height.
• To remove the platform: unhook the adjustment plate from the small strap. See strap storing in step 4.

Activity Table Mode

1. If the platform is attached to the activity center, reverse step 3.
2. NOTE: Always store away all straps for the tabletop mode.
3. Align the platform to the center opening, push the 2 tabs into the front first, and press down firmly.
4. To remove the platform, apply pressure from underneath at the pointed side of the platform while holding down the tabletop. The platform should release easily.

Strap Storage

• Tabletop Straps: Place the strap into the storage slot underneath the tabletop. Pinch the strap and put the second hoop into the tabs. Repeat for the other 2 straps.
• Platform Straps: Always secure straps when the platform is not in use. Lay each strap back over itself and clip each adjustment plate to the strap. Store the strap by pinching it into the small tabs. DO NOT USE product with any loose and unsecured straps. Always check product before each use.

Battery Instruction

1. The light and sound board requires 3 AAA batteries (not included). Refer to the diagram for battery installation. Unscrew the battery door and pull outward. Install batteries as shown. Secure battery door with screw and push until it clicks into place.
2. CAUTION: Keep batteries out of children's reach. To prevent battery leaks: Remove batteries when storing product for a long time; dispose of used batteries immediately; always replace the entire set of batteries at one time; never mix old and new batteries, or batteries of different brands or types. Requires three AAA (LR03) batteries for toy operation. Non-rechargeable batteries are not to be recharged. Batteries must be inserted with the correct polarity. Supply terminals must not be short-circuited. Rechargeable batteries must be removed from the toy before being charged. Rechargeable batteries are only to be charged under adult supervision.

Toy Attachments

1. Place toys in the order shown. Toys must be properly attached before use.
2. NOTE: ONLY the rattle and the rocket toys are interchangeable.
3. All toys must be aligned with their single or double tab housings on the activity center tray. Align the toy base with the tabletop fitting. From underneath the tabletop, push the lock up and turn it left to lock.

Toy Attachment

• Use the diagram to lock toys onto the tabletop: (1) Push the tab up and rotate left to lock. (2) Rotate the tab right to release the toy. (3) Always put the small tab lock back into the tabletop when not in use.

Maintenance

DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.

Seat Fabric

1. To remove the seat fabric for maintenance, pull out all the plates from the tab on the seat base.
2. To reattach the fabric, insert the warning label side towards the backrest of the seat base. Fold the fabric over and insert the rear center plate into the tab. Connect all plates around the seat base tabs. All plates and tabs must be secured before use.

Table Legs

1. To remove the legs from the tabletop, press in the pin and pull the leg out. Repeat for the other 2 legs.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

⚠️ WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.