User Manual for Expert4house models including: ZXHZD-01 Light Sensor, ZXHZD-01, Light Sensor, Sensor
Tuya Smart Zigbee Lighting Sensor - Intelligent Automation
Tuya Smart Zigbee-verlichtingssensor - Intelligente automatisering
Capteur d'éclairage intelligent Tuya Zigbee - Automatisation intelligente
Light Sensor working voltage standby current DC 3V 10uA light sensor X 1 user manual X1 Used with gateway, automatically detect the brightness 2.4GHz of the surrounding environment, work with another alarm current communication 20mA Zigbee (Bluetooth is optional) 1.5V AAA dry battery X2 (optional) smart devices for automation. transmission distance 1030 meters (no obstruction indoor) 01000Lux (suitable at home or in office) detection range 0100lux: accuracy 5Lux 1001000lux: accuracy 50Lux Please read user manual carefully before operation LED indicator installation battery working temperature working humidity update frequency YES 3M adhesive tape or screw 1.5V AAA dry battery*2 -1050 95% (no condensation) half an hour indicator reset button Zigbee version: open mobile App, click "Add subdevice" on Zigbee gateway screen;press reset button until indicator blinks, then click "LED already blink" for adding device;after adding device is successful, it is able to find device on the "Home" screen . Bluetooth version: open Bluetooth switch on mobile;open mobile App, click "search new device" on Bluetooth gateway screen; press reset button until indicator blinks, then click "Light is in a flash" for adding device;after adding device is successful, it is able to find device on the "Home" screen. note:if time is more than 2 minutes, will exit from matching. reset:press reset button until indicator blinks. update device status:press reset button one time, indicator blinks one time. Notes: 1Keep the sensing surface where the brightness probe is as clean as possible, otherwise the accuracy of the detection value will be affected. 2It is better to have no obstacles with constant changes in brightness above the sensing surface where the brightness probe is located.brightness above the sensing surface where the brightness probe is located. Installation 1choose a suitable place for installation. 2fix via 3M adhesive tape or screw. screw 3M adhesive tape screw for silk screen or sticker 3install and change battery:Press the bottom cover and push it up in the opposite directionof the reset button to open the bottom cover. 2020-8-7CorelDRAW X7 iLovePDF