Smart Projector

Attention

Please read this manual carefully before use and keep it for future reference.

1. The projector is non dustproof or waterproof.
2. In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
3. Please use the original power adapter. The projector should work under specified rated power supply.
4. When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
5. Do not cover the vents of projector. Heating will reduce the life of projector and cause danger.
6. Regularly clean projector vents, or dust may cause cooling malfunction.
7. Do not use the projector in greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
8. Please handle with care during daily use.
9. Please cut off the power if the projector is out of use for long time.
10. Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure Description

This manual is for reference only. It is subject to change without prior notice. Hotack reserves the right of final interpretation.

Key Components:

• ON/OFF Button: Power control.
• Vent: For cooling.
• HD Port: For high-definition signal input.
• USB Port: For connecting USB devices.
• Headset Jack: For audio output.
• POWER Button: Main power switch.
• Lens: Projects the image.
• Focus Wheel: Adjusts the focus of the projected image.
• Air Inlet: Allows air intake for cooling.
• ROTATE: Indicates the ability to rotate the projector.

Remote Component and Functions

Remote Control Layout:

• ON/OFF: Powers the projector on or off.
• MUTE: Mutes the audio output.
• Miracast: Enables Miracast functionality.
• DIRECTIONS (Up, Down, Left, Right): Navigates menus.
• OK Button: Confirms selections.
• RETURN Button: Goes back to the previous screen.
• MENU Button: Opens the main menu.
• HOME Button: Returns to the home screen.
• VOL+/-: Adjusts the volume.
• Switch to mouse control/Airpin: Toggles between mouse control and Airpin mode.

Power ON/OFF: Long press the Power button on the projector for 3 seconds.

Projection Setting

Access 'Projector setting' to configure projection mode, keystone correction, and screen zoom (larger/smaller).

Audio Setting:

Access 'Audio setting' to adjust the volume. Options include Bluetooth Setting, Language Setting, and Other Setting. Navigation also includes Projection Setting, Audio Setting, Date and Time Setting, and About device.

File Management

Use the APPS-FileManager to read the contents of external USB disks and hard disk devices. The interface shows 'Device', 'Video', 'Picture', 'Music', and 'File' categories, with an option for 'Local Memory' displaying used and available space.

Signal Connection

After connecting the projector to another output device, select 'HD Signal'. The display may show 'HDMI No signal' if a connection is not established.

Safety Instructions

• Pay attention to important information related to operation and maintenance to avoid problems and increase the projector's lifespan.
• Consult qualified personnel for installation and repair services. Do not use damaged wires, accessories, or other peripherals.
• Keep the projector away from flammable, explosive materials, strong electromagnetic interference (e.g., radar stations, power stations), and strong ambient light (direct sunlight).
• Do not cover projector vents.
• Use the original power adapter.
• Ensure adequate ventilation and that vents are not covered to prevent overheating.
• When the projector is working, do not look directly into the lens, as the strong light can cause eye discomfort.
• Do not bend or drag the power cord.
• Do not place the power cord under the projector or heavy objects.
• Do not cover the power cord with soft materials.
• Do not heat the power cord.
• Avoid touching the power adapter with wet hands.

Disclaimer

This manual provides general instructions. The pictures and functions described are subject to the actual product. Hotack is committed to improving product performance and reserves the right to modify product functions and interfaces without prior notice.

Keep your device properly. Hotack is not responsible for any loss caused by incorrect operation of software/hardware, repairs, or any other reasons. Hotack is not responsible for any loss claimed by third parties.

This manual has been carefully checked by professional engineers; please understand that inevitable omissions may occur.

FCC Warning Statement:

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.

Attention

Please do not look directly into the lens when projecting to prevent the strong light from harming your eyes. Children should use the projector under the supervision of adults. ?