mailto:info@nexo.fr
NEXO
User Manual for NEXO models including: IDS110-E, IDS110-T, IDS210-E, IDS210-T, IDS110-E Sub Bass Loudspeaker, Sub Bass Loudspeaker, Loudspeaker
File Info : application/pdf, 14 Pages, 1.49MB
DocumentDocumentDP2118-05c-DI IDS110-E IDS110-T IDS210-E IDS210-T User manual TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ___________________________________________________________________ 2 WARNINGS ____________________________________________________________________________ 3 EQUIPMENT ___________________________________________________________________________ 4 DESCRIPTION__________________________________________________________________________ 6 PRESET _______________________________________________________________________________ 7 CROSSOVER FREQUENCY_______________________________________________________________ 7 ACCESSORIES _________________________________________________________________________ 8 ARRAY EQ_____________________________________________________________________________ 8 MAINTENANCE _________________________________________________________________________ 9 TECHNICAL SPECIFICATIONS ___________________________________________________________ 11 USER NOTES _________________________________________________________________________ 12 EU Conformity declaration We, NEXO SA ZA DU PRE DE LA DAME JEANNE 60128 PLAILLY France Declare under our sole responsibility that the product Type Serial number Passive Loudspeaker IDS110 IDS210 On the product Is in conformity with the provisions of the following directive 2014/35/UE (Low Voltage Directive) including all applicable amendments: Applied rules and standards: EN 13155, EN 62368 Plailly, December 18th, 2015 Joseph CARCOPINO, R&D Director Page 2 / 14 IDS110 - IDS210 - Accessories WARNINGS WARNINGS PRECAUTIONS Do not open the speaker, do not try to disassemble it neither to modify it in any way. The system doesn't include any userrepairable part. If the system seems to be malfunctioning or damaged, stop using it at once and have it repaired by a NEXO qualified technician. Do not expose the system directly to the sun or to the rain, do not immerse it into fluids, do not place objects filled with liquid on the system. If a liquid gets into the system, please have it inspected by a NEXO qualified technician. The connection should be performed by qualified technician, by ensuring that power is off. Operating temperature with temperate climate: 0°C to +40°C (+32°F to +104); -20°C à +60°C (-4°F to +140°F) for storage. SAFETY INFORMATIONS Read this manual before using the speaker. Keep this manual available for further reference. Observe all warnings and cautions. Please check the NEXO Web site nexo-sa.com to get the most up-to-date version of this manual. Ensure you are aware of the safety rules applying to rigging, stacking or installing on tripod or speaker stand. Failure to observe these rules may expose persons to potential wounds or even death. Only use the system with accessories specified by NEXO. Please always consult a NEXO-accredited technician if the installation needs architectural works and observe following precautions: Mounting Precautions: - Please select screws and mounting location supporting 4 times the system weight. - Do not expose the system to excessive dust, vibrations, to extreme cold or hot temperatures, to reduce the risk of damaging components. - Do not place the system in an unstable position: it could fall accidentally. - If the system is used on a tripod, please ensure the tripod's specifications are adapted and that its height does not exceed 1.40m/55". Do not move the tripod with the system in position. Connection and Powering Precautions: - Unplug connected cables before moving the system. - Power off the system before connecting the system. - When switching on the installation, the amplifier must be powered last; when switching the installation off, shut off the amplifier first. - If you work by cold temperatures, progressively raise the level to nominal value during the first minutes of use, to allow the system components to stabilize. Please check regularly the system condition. HIGH SOUND PRESSURE LEVELS Exposure to very high sound pressure levels may cause permanent hearing losses. Degrees of hearing losses may be different from one person to another, but almost everybody will be affected if exposed to high sound pressure levels during a long period of time. The OSHA (Occupational Safety and Health Administration) American Agency specified the following maximal exposures: Number of Hours 8 6 4 3 2 1 ½ 1 ½ ¼ or less Sound Pressure Level (dBA), Slow Response 90 92 95 97 100 102 105 110 115 WASTE OF ELECTRIC OR ELECTRONIC EQUIPMENT This symbol on the product or its packaging indicates that this product must not be treated as household waste. Instead, it is your responsibility to hand it over to a designated collection point for the recycling of waste electrical and electronic equipment. By ensuring your waste equipment is recycled, you will help prevent potential negative consequences for the environment and human health, which could appear if this product was not recycled. Recycling helps spare natural resources. For more information about the recycling of this product, please contact your local city office, your household waste disposal service or your reseller. IDS110 - IDS210 - Accessories Page 3 / 14 EQUIPMENT EQUIPMENT Handle on both side, connector plate M20 on the top (only T version), 4x M6 inserts on the bottom (remove the pad). Page 4 / 14 IDS110 - IDS210 - Accessories Assembly on distance rod or speaker stand Place distance rod on the connector plate (M20) of the Sub. Place ID24 on the distance rod / monitor stand IMPORTANT Speaker stand must be rated for ID24 weight. Speaker stand must always be installed on a horizontal surface. Stand height and footprint must be defined to prevent assembly from collapsing. Ensure that audience is not allowed within a safety area which radius is equal or higher than assembly height. Test steadiness of the assembly by pushing in all directions. WARNING: Height H must not exceed 2 m (6.6 ft). The M20 base plate located on IDS110-T and IDS210-T should be used only with speakers like ID24 with the IDT-TVP accessory attached The distance rod M20 35mm is not supplied. EQUIPMENT IDS110 - IDS210 - Accessories Page 5 / 14 DESCRIPTION DESCRIPTION The IDS110 and the IDS210 are two compact and powerful subwoofers, ideally complementing the ID24 speakers. Their lowprofile design is elegant, and allows placement in various places (in walls, staircases, under furniture or benches...). IDS110: 1x 10" loudspeaker IDS210: 2x 10" loudspeakers Versions: · IDS110-T: for "Touring" applications; Handles M20 threaded base; Black, white. · IDS110-E: for permanent installation; Black, white. · IDS210-T: for "Touring" applications; andles M20 threaded base; Black, white. · IDS210-E: for permanent installation; Black, white. Connectors: · IDS110t / IDS210t: equipped with two Speakon NL4 connectors with parallel-wired pins, one on each side and two on the back. The 1+/1- pins are used by the sub. · IDS110-E / IDS210-E: The subwoofer is supplied with a fixed cable (HO7ZZ-F), 2 x 2.5mm2 section, length 2m, outside diameter 9mm ±1mm. (+) : Red / Brown ; (-) : Black / Blue Amplification · The IDS110 and IDS210 subwoofers MUST be used with a NEXO processor to handle EQ, phase alignment, crossover and excursion/thermal protection for the system loudspeakers. There are two NEXO processor series supporting the IDS110 and IDS210 subwoofers: NXAMP (4-channel) amplified processors and DTD processors DTD (stereo + sub). DTD processors ensure optimal performances when used with DTDAMP power amplifiers (IDS110 only). · The following table shows the number of IDS110 / IDS210 subwoofers usable with each solution. IDS110 IDS210 NXAMP4x1MK2 1 or 2 per channel 1 per channel Recommended NXAMP4x2MK2 1 or 2 per channel 1 per channel NXAMP4x4MK2 1 or 2 per channel 1 per channel DTD + DTDAMP 4x0.7 DTD + DTDAMP 4x1.3 1 per channel 1 per channel Page 6 / 14 IDS110 - IDS210 - Accessories PRESET PRESET Please consult nexo-sa.com for NEXO TD Controllers firmware information. There are two setting ranges for surrounding speakers IDS110 and IDS210: "OMNI" setups (available on NXAMP and DTD); For a traditional use of the subwoofer in omnidirectional radiation (require at least one subwoofer and a channel of amplifier). "CARDIO" setups (only available on NXAMP); For a directional use (cardioid) of subwoofers (require at least two subwoofers and two channels of amplifier): · Setup "FR" (Front) for the subwoofer pointed at the audience · Setup "BA" (Back) for the subwoofer turned around. "OMNI" Assembly "CARDIO" Assembly CROSSOVER FREQUENCY Choose the crossover frequency value to application: · 85 Hz Recommended for a use with speakers type PS or PLUS serie. · 120 Hz Recommended for a use with speakers type ID24. IDS110 - IDS210 - Accessories Page 7 / 14 ACCESSORIES ACCESSORIES WARNINGS All IDS110/210 accessories are specifically rated in agreement with structural computations. Never use other accessories including push-pins when assembling IDS110/210 cabinets than the ones provided by NEXO: NEXO will decline responsibility over the entire IDS110/210 accessory range if any component is purchased from different supplier. PROHIBITED: ID24 below IDS110/210 without dedicated accessory IDI-SWM01 Wall mounting Eyebolt IDT-COVER110: Cover for IDS110-T ARRAY EQ The ArrayEQ allows to adjust the system frequency response in its lower range (see curves below, with different ArrayEq values): Page 8 / 14 IDS110 - IDS210 - Accessories MAINTENANCE NOTE: Speakers can be sent back to NEXO for recycling 10" driver access Remove the trap (8 screws). Remove 4 screws and the 10" driver. MAINTENANCE IDS110 IDS210 IDS110 - IDS210 - Accessories Page 9 / 14 MAINTENANCE Spare parts IDS110 1 2 4 5 MARK 1 2 3 4 5 6 7 QUANTITY 1 4 4 8 1 1 1 8 8 REFERENCE 05HPB10-4F 05FTCC 05VXTCBX625N-EM 05VECRM5-2 05JNEOID10T 05PID10TRAP 05PID10TRAPSW 05VXTCBX516N-EL 05VXTCBX516-EL IDS210 10" Driver (with screw and gasket) Pied plastique 38x15 Screw VXCBXN 6x25 (x10) Cage Nut M5 (x10) Trap Gasket Black Trap White Trap Screw VXCBXN 5x16 Black (x10) Screw VXCBX 5x16 White (x10) DESIGNATION 1 2 4 5 MARK 1 2 3 4 5 6 7 QUANTITY REFERENCE 2 05HPB10-4F 4 05FTCC 4 05VXTCBX625N-EM 8 05VECRM5-2 1 05COVERIDS210N 1 05COVERIDS210 8 05VRX5FN 8 05VRX5FB 8 05VXTCFX520N-EL 10" Driver (with screw and gasket) Plastic Pad 38x15 Screw VXCBXN 6x25 (x10) Cage Nut M5 (x10) Black Trap (with gasket) White trap (with gasket) Black spring washer (x10) White spring washer (x10) Screw VXFXN 5x20 Black (x10) DESIGNATION Page 10 / 14 IDS110 - IDS210 - Accessories TECHNICAL SPECIFICATIONS IDS110 IDS210 WITH NEXO ELECTRONICS Model Frequency Range IDS110 43Hz 130Hz (+/- 3dB) Sensitivity (1W / 1m) 97dB SPL Nominal Operating voltage 45Vrms (180Vpeak) Peak SPL Level (1m) 125dB Peak Crossover Frequency 85Hz / 120Hz Nominal Impedance 4 Recommended Amplification 400 to 650W TECHNICAL SPECIFICATIONS IDS210 43Hz 130Hz (+/- 3dB) 103dB SPL Nominal 45Vrms (180Vpeak) 131dB Peak 85Hz / 120Hz 2 800 to 1300W SPECIFICATIONS Model Components Material Finish Fittings Connector Weight IDS110 1x 10'' Long excursion IDS210 2x 10'' Long excursion Finnish birch plywood Black or White structured paint 4x M6 Inserts M20 flange (T version only) Touring version: 2x NL4, 4 poles connectors Instal version: 1x Cable gland with 2 cores cable 21 kg / 47 lb 37 kg / 82 lb Dimensions IDS110 - IDS210 - Accessories Page 11 / 14 USER NOTES USER NOTES Page 12 / 14 IDS110 - IDS210 - Accessories USER NOTES IDS110 - IDS210 - Accessories Page 13 / 14 NEXO S.A. Parc d'activité de la Dame Jeanne F-60128 PLAILLY Tel: +33 3 44 99 00 70 Fax: +33 3 44 99 00 30 E-mail: info@nexo.fr nexo-sa.com Page 14 / 14 IDS110 - IDS210 - Accessories