HONDA ACCORD HYBRID 2022 (01) PDF MANUAL - Manual-Hub.com

File Info : application/pdf, 649 Pages, 21.63MB

HONDA ACCORD HYBRID 2022 (01)

Owner's Manual
2022 ACCORD
Hybrid
https://manual-hub.com/

Event Data Recorders This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: · How various systems in your vehicle were operating; · Whether or not the driver and passenger safety belts were
buckled/fastened; · How far (if at all) the driver was depressing the accelerator
and/or brake pedal; and, · How fast the vehicle was traveling.
https://manual-hub.com/

These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.
The data belongs to the vehicle owner and may not be accessed by anyone else except as legally required or with the permission of the vehicle owner.

Service Diagnostic Recorders This vehicle is equipped with service-related devices that record information about powertrain performance. The data can be used to verify emissions law requirements and/or help technicians diagnose and solve service problems. It may also be combined with data from other sources for research purposes, but it remains confidential. Some diagnostic and maintenance information is uploaded to Honda upon vehicle start up.
California Perchlorate Contamination Prevention Act The airbags, seat belt tensioners, and CR type batteries in this vehicle may contain perchlorate materials - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/
As you read this manual, you will find information that is preceded by a NOTICE symbol. This information is intended to help you avoid damage to your vehicle, other property, or the environment.

https://manual-hub.com/

Software End User License Agreement
Your vehicle comes equipped with software, which is governed by the End User License Agreement in Owner's Manual, and which contains a binding arbitration clause. Please refer to the End User License Agreement for the terms and conditions governing your use of the installed software, as well as the applications, services, functions, and content provided through the software. Your use of the installed software will serve as your consent to the terms and conditions of the End User License Agreement. You may opt out within 30 days of your initial use of the Software by sending a signed, written notice to HONDA at American Honda Motor Co., Inc., Honda Automobile Customer Service, Mail Stop CHI-5, 1919 Torrance Blvd., Torrance, CA 90501-2746.

Privacy Notice This vehicle may share location and usage information. To manage this setting, visit www.hondalink.com/vehicle-data-choices.
To learn more about how we collect and use Personal Information, please read our Privacy Policy, accessible at www.honda.com.

https://manual-hub.com/

A Few Words About Safety
Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility.
To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others.
Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle. You must use your own good judgment.

You will find this important safety information in a variety of forms, including:
Safety Labels - on the vehicle.
Safety Messages - preceded by a safety alert symbol 3 and
one of three signal words: DANGER, WARNING, or CAUTION. These signal words mean:

3 DANGER

You WILL be KILLED or SERIOUSLY HURT if you don't follow instructions.

3WARNING You CAN be KILLED or SERIOUSLY HURT if
you don't follow instructions.

3CAUTION You CAN be HURT if you don't follow
instructions.

Safety Headings - such as Important Safety Precautions. Safety Section - such as Safe Driving. Instructions - how to use this vehicle correctly and safely.

This entire book is filled with important safety information - please read it carefully.

https://manual-hub.com/

Contents

This owner's manual should be considered a permanent part of the 2 Safe Driving P. 39

vehicle and should remain with the vehicle when it is sold.

For Safe Driving P. 40

Seat Belts P. 44

Airbags P. 53

The Navigation Manual is available online at owners.honda.com (U.S.) or honda.ca (Canada). If you are the first registered owner of your vehicle, you may request a complimentary printed copy of the Navigation Manual within the first six months of vehicle purchase. To request a copy, visit owners.honda.com. In Canada, please request a copy from your Honda dealer.
This owner's manual covers all models of your vehicle. You may find descriptions of equipment and features that are not on your particular model.
Images throughout this owner's manual (including the front cover) represent features and equipment that are available on some, but not all, models. Your particular model may not have some of these features.

2 Instrument Panel P. 87

Indicators P. 88

Gauges and Displays P. 141

2 Controls P. 171
Clock P. 172 Moonroof* P. 196 Seats P. 218

Locking and Unlocking the Doors P. 174

2 Features P. 249
Audio System P. 250 Customized Features P. 357

Audio System Basic Operation P. 257 HomeLink® Universal Transceiver* P. 378

2 Driving P. 409

Before Driving P. 410

Towing a Trailer P. 415

Parking Your Vehicle P. 512

Multi-View Rear Camera P. 523

2 Maintenance P. 529
Before Performing Maintenance P. 530 Maintenance MinderTM P. 533 Checking and Maintaining Wiper Blades P. 561 Climate Control System Maintenance P. 576

This owner's manual is for vehicles sold in the United States and Canada.
The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd. reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.

2 Handling the Unexpected P. 585

Tools P. 586

If a Tire Goes Flat P. 587

If the 12-Volt Battery Is Dead P. 604

Overheating P. 606

If You Cannot Unlock the Fuel Fill Door P. 621

2 Information P. 625
Specifications P. 626 Emissions Testing P. 631

Identification Numbers P. 628 Warranty Coverages P. 633

https://manual-hub.com/

Child Safety P. 71

Exhaust Gas Hazard P. 84

Safety Labels P. 85

Opening and Closing the Trunk P. 187 Security System P. 190 Operating the Switches Around the Steering Wheel P. 197 Interior Convenience Items P. 228

Windows P. 193 Mirrors P. 216 Climate Control System P. 244

Audio Error Messages P. 333 Bluetooth® HandsFreeLink® P. 381

General Information on the Audio System P. 335 Refuel Recommend P. 407

When Driving P. 416 Refueling P. 525

Honda Sensing® P. 447

Braking P. 503

Fuel Economy and CO2 Emissions P. 528

Maintenance Under the Hood P. 540 Checking and Maintaining Tires P. 564 Cleaning P. 577

Replacing Light Bulbs P. 553 12-Volt Battery P. 573 Accessories and Modifications P. 582

Remote Transmitter Care P. 575

Handling of the Jack P. 600 Indicator, Coming On/Blinking P. 609 If You Cannot Open the Trunk P. 622

Power System Won't Start P. 601 Fuses P. 616 Refueling P. 623

Emergency Towing P. 620

Devices that Emit Radio Waves P. 629 Authorized Manuals P. 636

Reporting Safety Defects P. 630 Customer Service Information P. 637

https://manual-hub.com/

Contents
Quick Reference Guide P. 6 Safe Driving P. 39
Instrument Panel P. 87 Controls P. 171 Features P. 249 Driving P. 409
Maintenance P. 529 Handling the Unexpected P. 585
Information P. 625 Index P. 638

Quick Reference Guide

Quick Reference Guide
Visual Index
Brightness Control (P 211) TRIP Button (P 145) Head-Up Display (HUD) Buttons* (P 166) System Indicators (P 88) Gauges (P 141) Driver Information Interface (P 143) Audio System (P 257) Navigation System*
() See Navigation System Manual
Hazard Warning Button Front Seat Heater Buttons* (P 241) Front Seat Heaters and Seat Ventilation
Buttons* (P 242)
Climate Control System (P 244) Rear Defogger (P 210) Heated Door Mirror Button (P 210) Center Pocket (P 230) POWER Button (P 197)
(Vehicle Stability AssistTM (VSA®) System OFF) Button (P 436) Safety Support Switch (P 453, 491) Parking Sensor System Button* (P 514) CHaneaaditaendmoWdeilns dshield Button (P 210)

https://manual-hub.com/

Headlights/Turn Signals (P 200, 201) Fog Lights* (P 203)

Quick Reference Guide

Deceleration Paddle Selector ( - ) (P 430) Left Selector Wheel (P 144) (Home) Button (P 144) Horn (Press an area around .) (HUD) Button* (P168) Button (P 465)
Wipers/Washers (P 208) Deceleration Paddle Selector ( + ) (P 430) Adaptive Cruise Control (ACC) with Low
Speed Follow Buttons (P 464)
Lane Keeping Assist System (LKAS) Button
(P 482)
Interval Button (P 474)
CHaneaaditaendmoSdteelsering Wheel* (P 240) Steering Wheel Adjustments (P 215) Voice Control Buttons (P 282) Bluetooth® HandsFreeLink® System Buttons (P 381) Audio Remote Controls (P 254)

https://manual-hub.com/

* Not available on all models 7

Quick Reference Guide

Visual Index

Power Window Switches (P Master Door Lock Switch (P Door Mirror Controls (P 217) Memory Buttons* (P 214) SET Button* (P 214)

193) 185)

Interior Fuse Box (P 617) Hood Release Handle (P Trunk Opener (P 187)

541)

https://manual-hub.com/

Driver's Front Airbag

(P 56)
Rearview Mirror (P 216) HomeLink® Buttons* (P 379) Accessory Power Socket

(P 235)
Passenger's Front Airbag

(P 56)

Wireless Charger* (P 236) USB Ports (P 251) Glove Box (P 230) Trunk Main Switch (P 189) Shift Button

Transmission (P 423)

Parking Brake (P 503) ECON Button (P 433) SPORT Button (P 429) EV Button (P 15) Automatic Brake Hold Button

(P 508)
Electric Parking

Brake

Switch

(P 416)

Side Curtain Airbags (P 66) Ceiling Light (P 228) Grab Handle Coat Hook (P 234)
Side Airbags (P 64) Seat Belt (Installing a Child Seat) (P 78) Seat Belt to Secure a Child Seat (P 80) Rear Seat (P 222) LATCH to Secure a Child Seat (P 76)
https://manual-hub.com/

Map Lights
(P 229)
Moonroof
Switch* (P 196)
Sunglasses
Holder (P 233)
LINK Button*
(P 315)
ASSIST Button*
(P 313)
Sun Visors Vanity Mirrors Seat Belts (P 44) USB Ports*
(P 251)
Knee Airbags
(P 61)
Front Seat
(P 218)
Accessory Power
Socket (P 235)
* Not available on all models 9

Quick Reference Guide

Visual Index
10

Maintenance Under the Hood (P 540) Windshield Wipers (P 208, 561) Power Door Mirrors (P 217)
Door Lock/Unlock Control (P 176) Headlights (P 201, 553) Front Turn Signal/Side Marker Lights (P 200, 555) Parking/Daytime Running Lights (P 204, 555) Fog Lights* (P 203, 555) Tires (P 564, 587)
https://manual-hub.com/

Quick Reference Guide

High-Mount Brake Light (P 560) Opening/Closing the Trunk (P 187) Emergency Trunk Release Lever (P 189)

How to Refuel (P 526)

Trunk Release Button (P 188) Rear License Plate Light (P 560) Multi-View Rear Camera (P 523) Back-Up Lights (P 558) Taillights (P 558) Brake Lights* (P 558) Brake Lights (P 556) Rear Turn Signal Lights (P 556) Rear Side Marker/Taillights (P 556)

https://manual-hub.com/

* Not available on all models 11

Quick Reference Guide

SPORT HYBRID i-MMD (intelligent Multi-Mode Drive)
Your SPORT HYBRID i-MMD vehicle uses both an electric motor and a gasoline engine as propulsion sources, with the electric motor receiving electricity from an internal High Voltage battery or internal generator. The High Voltage battery is charged from the generator driven by the engine or regenerative braking.
When driving, your vehicle is propelled exclusively by the electric motor, exclusively by the gasoline engine, or by a combination of the two. The system selects which propulsion source is most appropriate and automatically switches to it. Under certain circumstances, pressing the EV button can manually enable EV (driven only on electricity) mode.
Energy efficiency As with a gasoline-powered vehicle, hybrid vehicle fuel efficiency and driving range is most impacted by your driving style. Aggressive acceleration and high-speed driving can easily trigger the system to switch the propulsion source to the gasoline-powered engine. In addition, heavy climate control system use negatively affects vehicle range and efficiency. Either of these use patterns will more quickly reduce the High Voltage battery's state of charge.
Battery types There are two types of batteries used in this vehicle; a standard 12-volt battery that powers the airbags, the interior and exterior lights, and other standard 12-volt systems; and a high voltage battery that is used to power the propulsion motor and recharge the 12-volt battery.

https://manual-hub.com/

Quick Reference Guide

SPORT HYBRID i-MMD SYSTEM MAIN COMPONENTS
Gasoline Engine Runs the generator and under certain
conditions, drives the wheels directly.
Generator Starts the engine and generates electric power
when driven by the gasoline engine to supply electricity to power the electric motor and/or to charge the High Voltage battery.
Electric Motor Provides propulsion to drive the wheels in
conjunction with the gasoline engine in certain conditions and provides electricity to the High Voltage battery through regenerative braking.
High Voltage Battery Provides electrical storage and serves
as a power source for the electric motor. Learning about the High Voltage battery's characteristics will help you get the best handling and maximize the range of your electric vehicle. (P446)
High Voltage Battery Charge Level Indicator Displays
battery state of charge. When the indicator:
· Displays two or less segments, EV mode is no longer available. · Displays ten segments, battery charge level is full.

High Voltage Battery
Generator & Electric Motor Gasoline Engine

https://manual-hub.com/

Vehicle Speed

Time

Quick Reference Guide

Operating mode

Electric Vehicle (EV)

Hybrid (HV)

Engine (Direct Drive)

Regeneration

Driving state

Stopped or driven at low speeds: Driven in high-load conditions

· Only the electric motor

(e.g., when accelerating, going

provides propulsion to the uphill):

wheels.

· The Electric Motor provides

propulsion to the wheels.

· The gasoline engine drives

the generator, supplying

electricity to the electric

motor for added propulsion

or to the High Voltage battery

for charging.

Driven in high-speed, low-load conditions:
· The gasoline engine provides
propulsion to the wheels.
· The High Voltage battery
supplies electricity to the electric motor for added propulsion.
· The electric motor provides
electricity to the High Voltage battery through regenerative braking.

The accelerator pedal is released and the vehicle is decelerating.
· The electric motor provides
electricity to the High Voltage battery through regenerative braking.

Power Flow Monitor

Electric motor Generator Engine
High Voltage battery
14

Stopped/Running Stopped Stopped Discharge

Running Generating
Running Charging/Discharge

Generating/Running No Output Running
Charging/Discharge

Regenerating Stopped/No Output Stopped/No Output
Charging

https://manual-hub.com/

Quick Reference Guide

EV Button
EV mode is enabled by pressing the EV button near the shift button.

The EV mode indicator comes on in the instrument panel when EV mode is enabled.
Press the EV button again to switch back to HV mode.

Press

Some conditions, such as a low High Voltage battery level and a high vehicle speed, may keep the system from manually switching into EV mode. The beeper sounds and a message appears on the driver information interface with the button pressed when EV mode is disabled.

Shifts in vehicle, driving, or road conditions may automatically cancel EV mode and switch back to HV mode.

A message will appear on the driver information interface and EV mode may be canceled automatically when: The High Voltage battery charge level is low. Your vehicle speed is too high. Your vehicle speed is above 25 mph (40 km/h) while the engine is in warming-up operation. You fully depress the accelerator pedal. You are driving on hilly road.
2 Driver Information Interface Warning and Information Messages (P115)

In EV mode, the acoustic vehicle alerting system is on. 2 Acoustic Vehicle Alerting System (P434)

https://manual-hub.com/

Regenerative Energy and Regenerative Braking

When regenerative braking is in operation
Motor

When decelerating without the accelerator being depressed or the brake pedal being applied, or while driving downhill, the electric motor acts as a generator that recovers a portion of the electrical energy that was used to accelerate the vehicle. This regenerative braking slows the vehicle in a manner similar to engine braking in a gasoline-powered vehicle. You can control the rate of deceleration by using the deceleration paddle selector.

Quick Reference Guide

High Voltage Battery

Auto Engine Stop/Start Your vehicle's gasoline engine automatically stops running during vehicle operation or restarts while the vehicle is stationary when it is appropriate. In the following cases, however, auto engine stop may not activate.
· The vehicle momentarily needs additional power for aggressive acceleration, or driving uphill or at high speed. · The climate control system is in heavy use. · The High Voltage battery temperature is high or low.
Sounds Unique to the SPORT HYBRID i-MMD System When you first start driving this vehicle, you will likely hear some unfamiliar sounds, particularly when you turn on the power system, or while you are driving or accelerating from a stop. Some of these sounds are unique to this vehicle`s powertrain, fuel, and climate control systems; others are similar to sounds generated by conventional automobiles that typically are masked by louder noises absent from a vehicle of this design. These sounds are not a cause for concern, and you will soon recognize them as normal and thus be able to detect any new or unusual noise should one develop.
After shutting off the engine, you may hear certain noises coming from the vehicle. Here's the lowdown: Noise from Under Vehicle: This noise is caused by the vacuum pump inside the fuel evaporation leakage check module (ELCM). Depending on conditions, the pump will come on for about 15 minutes about 5 to 10 hours after engine shutoff. This noise is just normal vehicle operation and doesn't indicate a vehicle problem.

https://manual-hub.com/

Safety Precautions
Do not cover the air intake.
Air Intake If the air intake is obstructed during vehicle operation, the High Voltage battery can become too hot. To protect the battery, the system may start to limit the battery's output and cause the power system and 12-volt battery charging system indicators to come on.

Do not touch the High Voltage system
Attempting to take a High Voltage system component apart or disconnect one of its wires can cause severe electrical shock. Make sure that any maintenance or repairs to the High Voltage system are performed by a Honda dealer.
If a crash occurs
Be careful of electric shock hazard.
uIf a severe crash damages your vehicle's High Voltage system, there is a possibility of electrical shock due to exposed High Voltage components or wires. If this happens, do not touch any of the High Voltage system components or any of its orange wires.
Avoid contact with High Voltage battery fluid.
uThe High Voltage battery contains a flammable electrolyte that could leak as a result of a severe crash. Avoid skin or eye contact with the electrolyte as it is corrosive. If you accidentally come into contact with the electrolyte, rinse the exposed skin or flush your eyes with copious amounts of water for at least five minutes, and seek medical attention immediately.
Use a fire extinguisher for an electrical fire.
uAttempting to extinguish an electrical fire with even a small quantity of water, from a garden hose for instance, can be dangerous.
Any time the vehicle is damaged in a crash, have it repaired by a dealer.
Emergency Shutdown System for the High Voltage System
If the vehicle is involved in a crash, the emergency shutdown system will activate depending on the severity of the impact. When the system activates, the High Voltage system automatically shuts down, and the vehicle can no longer move under its own power. To return the High Voltage system back to normal operation, consult a dealer.
Honda collects and recycles High Voltage batteries used in its vehicles consult a dealer for more information.

https://manual-hub.com/

Quick Reference Guide

Eco Assist® System (P 433)
Ambient Meter
With SPORT mode off, the color of the ambient meter changes to green to indicate that the vehicle is being driven in a fuel efficient manner.

Ambient Meter

ECON Mode Indicator (P 107)
Comes on when the ECON button is
pressed.

ECON Button (P 433)
Helps maximize fuel economy.

https://manual-hub.com/

Quick Reference Guide

Drive Cycle Score/Lifetime Points
Comes on when the power mode is in VEHICLE OFF.

Eco Drive Display (P163)
Keep the vehicle icon near the center of the circle.

Fuel economy is:

Worse

Better

Best

Drive Cycle Score
Lifetime Points

Better

Worse

Aggressive Deceleration

Moderate Deceleration

Slow Acceleration/ Deceleration

Moderate Acceleration

Aggressive Acceleration

https://manual-hub.com/

Quick Reference Guide

Safe Driving (P 39)
Airbags (P 53)
Your vehicle is fitted with airbags to help protect you and your passengers during a moderate-to-severe collision.
Child Safety (P 71)
All children 12 and younger should be seated in the rear seat. Smaller children should be properly restrained in a forward-facing child seat. Infants must be properly restrained in a rear-facing child seat.
Exhaust Gas Hazard (P 84)
Your vehicle emits dangerous exhaust gases that contain carbon monoxide. Do not run the engine in confined spaces where carbon monoxide gas can accumulate.

Before Driving Checklist (P 43)
Before driving, check that the front seats, head restraints, steering wheel, and mirrors have been
properly adjusted.

Seat Belts (P 44)
Fasten your seat belt and sit upright well back in the seat.
Check that your passengers are wearing their seat belts correctly.
Fasten your lap belt as low as possible.

https://manual-hub.com/

Quick Reference Guide

Instrument Panel (P 87)
Indicators (P 88)/Gauges (P 141)/Driver Information Interface / (P 143) Head-Up Display* (P 166)
Head-Up Display* (P166)

POWER/CHARGE Gauge (P154)
High Voltage Battery Charge Level Gauge (P142)

Speedometer (P141)
Fuel Gauge (P141)

Driver Information Interface (P143)
Shift Position Indicator/
Transmission System Indicator (P97, 98)

Deceleration Paddle Selector Indicator (P97)

https://manual-hub.com/

* Not available on all models 21

Quick Reference Guide

Controls (P 171)
Clock (P 172)
To adjust time

Models with navigation system
The navigation system receives signals from GPS satellites, updating the clock automatically.

POWER Button (P 197)
Press the button to change the vehicle's power mode.

To adjust date

a Press the (Home) button, then
select Settings.
b Select System, then Day & Time. c Select Set Date & Time. d Select Automatic Date & Time, then
select OFF.
e Select Set Date or Set Time. f Adjust the dates, hours, and minutes
by selecting 3 / 4 .
g Select Save to set the date or time.
22

https://manual-hub.com/

Quick Reference Guide

Turn Signals (P 200)
Turn Signal Control Lever
Lights (P 201)
Light Control Switches High Beam Low Beam
Flashing

Wipers and Washers
(P 208)
Wiper/Washer Control Lever
Adjustment Ring (-: Low Sensitivity*1 (- : Lower speed, fewer sweeps*2 (+: High Sensitivity*1 (+ : Higher speed, more sweeps*2

Models with automatic intermittent wipers
AUTO should always be turned OFF before
the following situations in order to prevent
severe damage to the wiper system: Cleaning the windshield Driving through a car wash No rain present

Pull toward you to spray washer fluid.
MIST OFF AUTO*1: Wiper speed varies automatically INT*2: Low speed with intermittent LO: Low speed wipe HI: High speed wipe
*1:Models with automatic intermittent wipers
*2:Models without automatic intermittent wipers

Steering Wheel (P 215)
To adjust, push the adjustment lever down, adjust to the desired position, then lock the lever back in place.
To lock
To adjust

https://manual-hub.com/

Quick Reference Guide

Unlocking the Front Doors from the Inside
(P 184) Pull either front door inner handle to
unlock and open it at the same time.

Trunk (P 187)
Press and hold the trunk opener on the driver's door unlocks and opens the trunk.
Press the trunk release button on the keyless remote to unlock and open the trunk.
Press the trunk release button on the trunk lid to unlock and open the trunk.

Power Windows (P 193)
With the power mode in ON, open and close the power windows.
If the power window lock button is in the off position, each passenger's window can be opened and closed with its own switch.
If the power window lock button is in the on position (indicator on), each passenger's window switch is disabled.
Indicator
Window Switch

Trunk Opener
Power Door Mirrors
(P 217) With the power mode in ON, move the
selector switch to L or R. Push the appropriate edge of the
adjustment switch to adjust the mirror.
Selector Switch

Power Window Lock Button

Adjustment Switch
https://manual-hub.com/

Quick Reference Guide

Climate Control System (P 244)

Press the AUTO button to activate the climate control system.

Press the

button to turn the system on or off.

Press the button to defrost the windshield.

AUTO Button

Dashboard vents Dashboard and floor Floor vents and back of the vents, and back of center console* the center console*

Floor and defroster vents

Fan Control Dial

(Recirculation) Button
Driver's Side Temperature Control Dial MODE Control Button
(Windshield Defroster) Button

Passenger's Side Temperature Control Dial
SYNC (Synchronization) Button
A/C (Air Conditioning) Button
(On/Off) Button

https://manual-hub.com/

* Not available on all models 25

Quick Reference Guide

Features (P 249)
Audio Remote Controls
(P 254) (home) Button
/ (Seek/ Skip) Buttons
Left Selector Wheel VOL(+/VOL(- (Volume) Buttons
VOL(+/VOL(- (Volume) Buttons Press to adjust the volume up/down.
Left Selector Wheel When selecting the audio mode Press the (home) button, then roll up or down to select Audio on the driver information interface, and then press the left selector wheel.

Roll up or down: To cycle through the audio modes, roll up or down and then press the left selector wheel:
FM
AM SiriusXM®*
USB1 (USB)
USB2*
Bluetooth® Audio
Smartphone Connection (Apple CarPlay/Android Auto)

(Seek/Skip) Buttons

Radio: Press / to change the

preset station.

iPod, USB device, Bluetooth® Audio or

Smartphone Connection:

Press / to skip to the

beginning of the next song or

return to the beginning of the

current song.

USB device:

Press and hold / to

change a folder.

https://manual-hub.com/

Quick Reference Guide

Audio System (P 257)
For navigation system operation () See the Navigation System Manual

(Home) Button (Back) Button
(Day/Night) Button (Seek/Skip) Button (Seek/Skip) Button
VOL/ (Volume/Power) Knob

Audio/Information Screen (Clock) Button*/ (Map) Button*
(Phone) Button (Audio) Button SOURCE Button
Selector Knob

https://manual-hub.com/

* Not available on all models 27

Quick Reference Guide

Driving (P 409)
Transmission (P 422)
Select (P and depress the brake pedal when turning on the power. Shift selection
READY Indicator On: You can start to drive.

Shift Position Indicator The shift position indicator and the shift button indicator indicate the current shift selection.

Shift Position Indicator

Shift Button Indicator

Park Press the (P button. Used when parking or before turning the power on or off. Transmission is locked.
Reverse Press back the (R button. Used when reversing.
Neutral Press the (N button. Transmission is not locked.
Drive Press the (D button. Used for normal driving. The deceleration paddle selector can be used temporarily. The deceleration paddle selector can be used when SPORT mode is on.

https://manual-hub.com/

Quick Reference Guide

Deceleration Paddle Selector (P430)
When you release the accelerator pedal, you can control the rate of
deceleration without releasing your hands from the steering wheel. Using
the deceleration paddle selector situated on the steering wheel, you can
sequentially shift through four stages of deceleration.
Pull the (+ selector for a few seconds when you want to cancel the
deceleration paddle selector. When SPORT mode is OFF
If you pull back the paddle selector, the rate of deceleration will change temporarily, and the stage will appear in the instrument panel. When SPORT mode is ON If you pull back the paddle selector, the rate of deceleration will change and the stage along with M will appear in the instrument panel.

When SPORT mode is OFF, the deceleration stage appears.

When SPORT mode is ON, the deceleration stage and M appear.

(- Paddle Selector

(+ Paddle Selector

Deceleration stage

https://manual-hub.com/

Quick Reference Guide

VSA® On and Off (P 436)
The Vehicle Stability AssistTM (VSA®) system helps stabilize the vehicle during cornering and helps maintain traction while accelerating on loose or slippery road surfaces.
VSA® comes on automatically every time you turn on the power system.
To partially disable or fully restore VSA® function, press and hold the button until you hear a beep.
CMBSTM On and Off
(P 453) When a possible frontal collision is likely
unavoidable, the CMBSTM can help you to reduce the vehicle speed and the severity of the collision. The CMBSTM is turned on every time you turn on the power system. To turn the CMBSTM on or off, use the safety support switch.
Tire Pressure Monitoring System (TPMS) (P 438)
Detects a change in tire conditions and overall dimensions due to decrease in tire pressures.
The TPMS is turned on automatically every time you turn on the power system.
A calibration procedure must be performed when certain conditions arise.

Refueling (P 525)
Fuel recommendation: Unleaded gasoline, pump octane number 87 or higher Fuel tank capacity: 12.81 US gal (48.5 L)
a Unlock the driver's
door using the master door lock switch. 2 Using the Master
Door Lock Switch (P185)
b Press on the edge of
the fuel fill door to make it pop up slightly.
c After refueling, wait
for about five seconds before removing the filler nozzle.

https://manual-hub.com/

Quick Reference Guide

Honda Sensing® (P 447)

Models without Low Speed Braking Control
Honda Sensing® is a driver support system which employs the use of two distinctly different kinds of sensors, a radar sensor located at the lower part of the front bumper and a front sensor camera mounted to the interior side of the windshield, behind the rearview mirror.
Models with Low Speed Braking Control
Honda Sensing® is a driver support system which employs the use of three distinctly different kinds of sensors: a radar sensor located at the lower part of the front bumper, a front sensor camera mounted to the interior side of the windshield, behind the rearview mirror, and the sonar sensors located in the front and rear bumper.

All models
Front Sensor Camera

The camera is located behind the rearview mirror.

Radar Sensor

The radar sensor is at the lower part of the front bumper.
Models with Low Speed Braking Control

Collision Mitigation Braking SystemTM (CMBSTM) (P 450)
The system can assist you when it determines there is a possibility of your vehicle colliding with a vehicle or a pedestrian detected in front of your vehicle. The CMBSTM is designed to alert you when the potential for a collision is determined, as well as to reduce your vehicle speed to help minimize collision severity when a collision is deemed unavoidable.
Low Speed Braking Control * (P 459)
Using sonar sensors located on the front and rear bumpers, the vehicle detects if there is danger of a potential collision with a wall or other obstacle. The system is designed to alert you when a potential collision is determined, as well as assist in reducing speed, avoiding collisions, and reducing collision severity.

Sonar Sensors
https://manual-hub.com/

* Not available on all models 31

Quick Reference Guide

Adaptive Cruise Control (ACC) with Low Speed Follow (P 464)
Helps maintain a constant vehicle speed and a set following-interval behind a vehicle detected ahead of yours and, if the detected vehicle comes to a stop, can decelerate and stop your vehicle, without you having to keep your foot on the brake or the accelerator.
Lane Keeping Assist System (LKAS) (P 480)

Traffic Sign Recognition System (P493)
Reminds you of road sign information, such as the current speed limit, your vehicle has just passed through, showing it on the driver information interface and the headup display*.

Provides steering input to help keep the vehicle in the middle of a detected lane and provides tactile and visual alerts if the vehicle is detected drifting out of its lane.
Road Departure Mitigation (RDM) System
(P 488)

Alerts and helps to assist you when the system detects a possibility of your vehicle unintentionally crossing over detected lane markings and/or leaving the roadway altogether.

https://manual-hub.com/

Quick Reference Guide

Maintenance (P 529)

Under the Hood (P 540)

Check engine oil, engine coolant, inverter coolant, and windshield

washer fluid. Add when necessary. Check brake fluid. Check the 12-volt battery condition monthly.

Wiper Blades (P 561)
Replace blades if they leave streaks

a Pull the hood release handle under the corner of the

across the windshield or become noisy.

dashboard.

b Locate the hood latch lever, push it to the side, and then raise
the hood. Once you have raised the hood slightly, you can release the lever.
Tires (P 564)
Inspect tires and wheels regularly.
Check tire pressures regularly. Install snow tires for winter
driving.

Lights (P 553)
Inspect all lights regularly.

c When finished, close the hood and make sure it is firmly locked
in place.
https://manual-hub.com/

* Not available on all models 33

Quick Reference Guide

Handling the Unexpected (P 585)

Flat Tire (P 587)
Park in a safe location and repair the flat tire using the tire repair kit in the trunk.

Power System Won't
Start (P 601)
If the 12-volt battery is dead, jump start using a booster battery.

Overheating (P 606)
Park in a safe location. If you do not see
steam under the hood, open the hood,
and let the power system cool down.

Indicators Come On
(P 609) Identify the indicator and consult the
owner's manual.

Blown Fuse (P 616)
Check for a blown fuse if an electrical
device does not operate.

Emergency Towing
(P 620) Call a professional towing service if you
need to tow your vehicle.

https://manual-hub.com/

Quick Reference Guide

What to Do If
Why does the brake pedal pulsate slightly when applying the brakes?
The rear door cannot be opened from inside the vehicle. Why?
Why do the doors lock after I unlocked the doors?
Why does the beeper sound when I open the driver's door?

This can occur when the ABS activates and does not indicate a problem. Apply firm, steady pressure on the brake pedal. Never pump the brake pedal.
2 Anti-lock Brake System (ABS) (P 510)
Check if the childproof lock is in the lock position. If so, open the rear door with the outside door handle. To cancel this function, slide the lever up to the unlock position.
If you do not open the doors within 30 seconds, the doors are relocked automatically for security.
The beeper sounds when: · The power mode is in ACCESSORY. · The exterior lights are left on.

https://manual-hub.com/

Quick Reference Guide

Why does a beeper sound when I walk away from the vehicle after I close the door?
Why does the beeper sound when I start driving?
Why do I hear a screeching sound when I apply the brake pedal?
I'm seeing an amber indicator of a tire with an exclamation point. What is that?
Pressing the electric parking brake switch does not release the parking brake. Why?

The beeper sounds if you move outside the walk away auto lock operating range before the door completely closes.
2 Locking the doors and trunk (Walk away auto lock®) (P179)
The beeper sounds when the driver and/or front passenger are not wearing their seat belts.
The brake pads may need to be replaced. Have your vehicle inspected by a dealer.
The Tire Pressure Monitoring System (TPMS) needs attention. If you recently inflated or changed a tire, you have to recalibrate the system.
2 Tire Pressure Monitoring System (TPMS) (P 438)
Press the electric parking brake switch with the brake pedal depressed.

https://manual-hub.com/

Quick Reference Guide

Depressing the accelerator pedal does not release the parking brake automatically. Why?
Why does the shift position automatically change to (P when I open the driver's door to check for parking space lines when reversing?

· Fasten the driver's seat belt. · Check if the transmission is in (P or (N. If so, select any other
position.
· Fasten the driver's seat belt. · Close the driver's door and manually change the shift
position.
2 When opening the driver's door (P426)

https://manual-hub.com/

This page intentionally left blank.

https://manual-hub.com/

Safe Driving
You can find many safety recommendations throughout this chapter, and throughout this manual.

For Safe Driving Important Safety Precautions.............. 40 Your Vehicle's Safety Features............ 42 Safety Checklist ................................. 43
Seat Belts About Your Seat Belts ........................ 44 Fastening a Seat Belt .......................... 49 Seat Belt Inspection............................ 52
Airbags Airbag System Components ............... 53 Types of Airbags ................................ 56 Front Airbags (SRS) ............................ 56

Knee Airbags ..................................... 61 Side Airbags....................................... 64 Side Curtain Airbags .......................... 66 Airbag System Indicators.................... 67 Airbag Care ....................................... 70 Child Safety Protecting Child Passengers ............... 71 Safety of Infants and Small Children... 73 Safety of Larger Children ................... 82 Exhaust Gas Hazard Carbon Monoxide Gas ....................... 84

Safety Labels Label Locations .................................. 85

https://manual-hub.com/

For Safe Driving

Safe Driving

The following pages explain your vehicle's safety features and how to use them properly. The safety precautions below are ones that we consider to be among the most important.

Important Safety Precautions
Always wear your seat belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with airbags, make sure you and your passengers always wear your seat belts, and wear them properly.

1Important Safety Precautions
Some states, provinces and territories prohibit the use of cell phones other than hands-free devices by the driver while driving.

Restrain all children Children ages 12 and under should ride properly restrained in a back seat, not the front seat. Infants and small children should be restrained in a child seat. Larger children should use a booster seat and a lap/shoulder seat belt until they can use the belt properly without a booster seat.

Be aware of airbag hazards While airbags can save lives, they can cause serious or fatal injuries to occupants who sit too close to them, or are not properly restrained. Infants, young children, and short adults are at the greatest risk. Be sure to follow all instructions and warnings in this manual.

Don't drink and drive Alcohol and driving don't mix. Even one drink can reduce your ability to respond to changing conditions, and your reaction time gets worse with every additional drink. So don't drink and drive, and don't let your friends drink and drive, either.

https://manual-hub.com/

Safe Driving

uuFor Safe DrivinguImportant Safety Precautions
Pay appropriate attention to the task of driving safely Engaging in cell phone conversation or other activities that keep you from paying close attention to the road, other vehicles, and pedestrians could lead to a crash. Remember, situations can change quickly, and only you can decide when it is safe to divert some attention away from driving.
Control your speed Excessive speed is a major factor in crash injuries and deaths. Generally, the higher the speed, the greater the risk, but serious injuries can also occur at lower speeds. Never drive faster than is safe for current conditions, regardless of the maximum speed posted.
Keep your vehicle in safe condition Having a tire blowout or a mechanical failure can be extremely hazardous. To reduce the possibility of such problems, check your tire pressures and condition frequently, and perform all regularly scheduled maintenance.
Do not leave children unattended in the vehicle Children, pets, and people needing assistance left unattended in the vehicle may be injured if they activate one or more of the vehicle controls. They may also cause the vehicle to move, resulting in a crash in which they and/or another person(s) can be injured or killed. Also, depending on the ambient temperature, the temperature of the interior may reach extreme levels, which can result in harm or death. Even if the climate control system is on, never leave them in the vehicle unattended as the climate control system can shut off at any time.

https://manual-hub.com/

Safe Driving

uuFor Safe DrivinguYour Vehicle's Safety Features
Your Vehicle's Safety Features

6 11 7
9 11 8
12

Safety Cage Crush Zones Seats and Seat-Backs Head Restraints Collapsible Steering Column 6 Seat Belts 7 Front Airbags 8 Knee Airbags 9 Side Airbags 10 Side Curtain Airbags 11 Door Locks 12 Seat Belt Tensioners

1Your Vehicle's Safety Features Your vehicle is equipped with many features that work together to help protect you and your passengers during a crash.
Some features do not require any action on your part. These include a strong steel framework that forms a safety cage around the passenger compartment, front and rear crush zones, a collapsible steering column, and tensioners that tighten the front seat belts in a sufficient crash.
However, you and your passengers cannot take full advantage of these features unless you remain seated in the correct position and always wear your seat belts. In fact, some safety features can contribute to injuries if they are not used properly.

The following checklist will help you take an active role in protecting yourself and your passengers.

https://manual-hub.com/

Safe Driving

uuFor Safe DrivinguSafety Checklist

Safety Checklist
For the safety of you and your passengers, make a habit of checking these items each time before you drive. · After everyone has entered the vehicle, be sure all doors are closed and locked.
Locking the doors helps prevent an occupant from being ejected and an outsider from unexpectedly opening a door.
2 Locking/Unlocking the Doors from the Inside P. 183
· Adjust your seat to a position suitable for driving. Be sure the front seats are adjusted as far to the rear as possible while allowing the driver to control the vehicle. Sitting too close to a front airbag can result in serious or fatal injury in a crash.
2 Seats P. 218
· Adjust head restraints to the proper position. Head restraints are most effective when the center of the head restraint aligns with the center of your head. Taller persons should adjust their head restraint to the highest position.
2 Adjusting the Front and Rear Outer Head Restraint Positions P. 225
· Always wear your seat belt, and make sure you wear it properly. Confirm that any passengers are properly belted as well.
2 Fastening a Seat Belt P. 49
· Protect children by using seat belts or child seats according to a child's age, height, and weight.
2 Child Safety P. 71

1Safety Checklist
If the door and/or trunk open message appears on the driver information interface, a door and/or the trunk is not completely closed. Close all doors and the trunk tightly until the message disappears.
2 Driver Information Interface Warning and Information Messages P. 115

https://manual-hub.com/

Safe Driving

Seat Belts

About Your Seat Belts
Seat belts are the single most effective safety device because they keep you connected to the vehicle so that you can take advantage of many built-in safety features. They also help keep you from being thrown against the inside of the vehicle, against any passengers, or out of the vehicle. When worn properly, seat belts also keep your body properly positioned in a crash so that you can take full advantage of the additional protection provided by the airbags.
In addition, seat belts help protect you in almost every type of crash, including: - frontal impacts - side impacts - rear impacts - rollovers
Lap/shoulder seat belts All five seating positions are equipped with lap/shoulder seat belts with emergency locking retractors. In normal driving, the retractor lets you move freely while keeping some tension on the belt. During a collision or sudden stop, the retractor locks to restrain your body.
The front passenger's and rear seat belts also have a lockable retractor for use with child seats.
2 Installing a Child Seat with a Lap/Shoulder Seat Belt P. 78

1About Your Seat Belts
3 WARNING
Not wearing a seat belt properly increases the chance of serious injury or death in a crash, even though your vehicle has airbags.
Be sure you and your passengers always wear seat belts and wear them properly.
If you extend the seat belt too quickly, it will lock in place. If this happens, slightly retract the seat belt, then extend it slowly.
Seat belts cannot completely protect you in every crash. But in most cases, seat belts can reduce your risk of serious injury.
Most states and all Canadian provinces and territories require you to wear seat belts.

https://manual-hub.com/

Safe Driving

uuSeat BeltsuAbout Your Seat Belts

Proper use of seat belts Follow these guidelines for proper use: · All occupants should sit upright, well back in the seat, and remain in that position
for the duration of the trip. Slouching and leaning reduce the effectiveness of the belt and can increase the chance of serious injury in a crash. · Never place the shoulder part of a lap/shoulder seat belt under your arm or behind your back. This could cause very serious injuries in a crash. · Two people should never use the same seat belt. If they do, they could be very seriously injured in a crash. · Do not put any accessories on the seat belts. Devices intended to improve comfort or reposition the shoulder part of a seat belt can reduce the protective capability and increase the chance of serious injury in a crash.

1About Your Seat Belts
If a rear seat passenger moves around and extends the seat belt, the lockable retractor may activate. If this happens, release the retractor by unfastening the seat belt and allow the belt to retract completely. Then, refasten the belt.

Continued
https://manual-hub.com/

Safe Driving

uuSeat BeltsuAbout Your Seat Belts

Seat Belt Reminder

Front seats The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts. If you set the power mode to ON and a seat belt is not fastened, a beeper will sound and the indicator will blink. After a few seconds, the beeper will stop and the indicator will come on and remain illuminated until the seat belt is fastened.
The beeper will periodically sound and the indicator will blink while the vehicle is moving until the seat belt is fastened.

1Seat Belt Reminder The indicator will also come on if a front passenger does not fasten their seat belt within six seconds after the power mode is set to ON.
When no one is sitting in the front passenger's seat, the indicator will not come on and the beeper will not sound.
The indicator also may not come on and the beeper may not sound when the occupant is not heavy enough to trigger the weight sensor. Such occupants (e.g., infants and smaller children) should be moved to the rear seat as a deploying front airbag likely will injure or kill them.
2 Protecting Child Passengers P. 71

https://manual-hub.com/

Safe Driving

: Fastened : Unfastened

Rear seats Your vehicle monitors rear seat belt use. A driver information interface notifies you if any of the rear seat belts are not used.
The display appears when: · Any of the rear passengers' seat belts are
unfastened when the power mode is set to ON. · A rear door is opened and then closed. · Any of the rear passengers fastens or unfastens their seat belt. The seat belt reminder indicator blinks and beeper sounds if any rear passenger's seat belt is unlatched while driving.

uuSeat BeltsuAbout Your Seat Belts

Continued
https://manual-hub.com/

uuSeat BeltsuAbout Your Seat Belts

Automatic Seat Belt Tensioners
The front seats are equipped with automatic seat belt tensioners to enhance safety.
The tensioners automatically tighten the front seat belts during a moderate-tosevere frontal collision, sometimes even if the collision is not severe enough to inflate the front airbags or the knee airbags.

1Automatic Seat Belt Tensioners The seat belt tensioners can only operate once. If a tensioner is activated, the SRS indicator will come on. Have a dealer replace the tensioner and thoroughly inspect the seat belt system as it may not offer protection in a subsequent crash.
During a moderate-to-severe side impact, the tensioner on that side of the vehicle also activates.

Safe Driving

https://manual-hub.com/

Safe Driving

uuSeat BeltsuFastening a Seat Belt

Fastening a Seat Belt

After adjusting a front seat to the proper position, and while sitting upright and well

back in the seat:

2 Seats P. 218

Pull out slowly.

1. Pull the seat belt out slowly.

Correct Seated Posture.

1Fastening a Seat Belt No one should sit in a seat with an inoperative seat belt or one that does not appear to be working correctly. Using a seat belt that is not working properly may not protect the occupant in a crash. Have a dealer check the belt as soon as possible.
Never insert any foreign objects into the buckle or retractor mechanism.

Latch Plate

Buckle

2. Insert the latch plate into the buckle, then tug on the belt to make sure the buckle is secure. u Make sure that the belt is not twisted or caught on anything.

If the seat belt appears to be locked in a fully retracted position, firmly pull out on the shoulder belt once, then push it back in. Then, smoothly pull it out of the retractor and fasten. If you are unable to release the seat belt from a fully retracted position, do not allow anyone to sit in the seat, and take your vehicle to a dealer for repair.
2 About Your Seat Belts P. 44 2 Seat Belt Inspection P. 52

Continued
https://manual-hub.com/

Safe Driving

uuSeat BeltsuFastening a Seat Belt

Lap belt as low as possible

3. Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of the belt so the lap part fits snugly. This lets your strong pelvic bones take the force of a crash and reduces the chance of internal injuries.
4. If necessary, pull up on the belt again to remove any slack, then check that the belt rests across the center of your chest and over your shoulder. This spreads the forces of a crash over the strongest bones in your upper body.

1Fastening a Seat Belt
3 WARNING
Improperly positioning the seat belts can cause serious injury or death in a crash.
Make sure all seat belts are properly positioned before driving.
To release the belt, push the red PRESS button and then guide the belt by hand until it has retracted completely. When exiting the vehicle, be sure the belt is properly stowed so that it will not get caught in the closing door.

Adjusting the Shoulder Anchor

The front seats have adjustable shoulder anchors to accommodate taller and shorter

occupants.

1. Move the anchor up and down while

holding the release button.

2. Position the anchor so that the belt rests

Push

across the center of your chest and over

your shoulder.

1Adjusting the Shoulder Anchor The shoulder anchor height can be adjusted to four levels. If the belt contacts your neck, lower the height one level at a time.
After an adjustment, make sure that the shoulder anchor position is secure.

https://manual-hub.com/

Safe Driving

uuSeat BeltsuFastening a Seat Belt

Advice for Pregnant Women
If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt and keep the lap part of the belt as low as possible across the hips.
Wear the shoulder belt across the chest avoiding the abdomen.

1Advice for Pregnant Women
Each time you have a checkup, ask your doctor if it is okay for you to drive.
To reduce the risk of injuries to both you and your unborn child that can be caused by an inflating front airbag:
· When driving, sit upright and adjust the seat as far
back as possible while allowing full control of the vehicle.
· When sitting in the front passenger's seat, adjust
the seat as far back as possible.

Wear the lap part of the belt as low as possible across the hips.

https://manual-hub.com/

Safe Driving

uuSeat BeltsuSeat Belt Inspection

Seat Belt Inspection
Regularly check the condition of your seat belts as follows:
· Pull each belt out fully, and look for frays, cuts, burns, and wear. · Check that the latch plates and buckles work smoothly and the belts retract
easily. u If a belt does not retract easily, cleaning the belt may correct the problem. Only
use a mild soap and warm water. Do not use bleach or cleaning solvents. Make sure the belt is completely dry before allowing it to retract.
Any belt that is not in good condition or working properly will not provide proper protection and should be replaced as soon as possible. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash. Have your seat belts inspected by a dealer after any collision.

1Seat Belt Inspection
3 WARNING
Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.
Check your seat belts regularly and have any problem corrected as soon as possible.

https://manual-hub.com/

Airbags
Airbag System Components

11 10 9

12 7 9 6
9

9
https://manual-hub.com/

9
Continued 53

Safe Driving

uuAirbagsuAirbag System Components

The front, driver's knee, front passenger's knee, side, and side curtain airbags are deployed according to the direction and severity of impact. Both side curtain airbags are deployed in a rollover. The airbag system includes:
a Two SRS (Supplemental Restraint System) front airbags. The driver's airbag is stored in the center of the steering wheel; the front passenger's airbag is stored in the dashboard. Both are marked SRS AIRBAG.
b Two knee airbags. The driver's knee airbag is stored under the steering column; the front passenger's knee airbag is stored under the glove box. Both are marked SRS AIRBAG.
c Two side airbags, one for the driver and one for the front passenger. The airbags are stored in the outer edges of the seatbacks. Both are marked SIDE AIRBAG.

d Two side curtain airbags, one for each side of the vehicle. The airbags are stored in the ceiling, above the side windows. The front and rear pillars are marked SIDE CURTAIN AIRBAG.
e An electronic control unit that, when the power mode is in ON, continually monitors information about the various impact sensors, seat and buckle sensors, rollover sensor, airbag activators, seat belt tensioners, and other vehicle information. During a crash event the unit can record such information.
f Automatic front seat belt tensioners. In addition, the driver's and front passenger's seat belt buckles incorporate sensors that detect whether or not the belts are fastened.
g Driver's seat position sensor. This sensor detects the driver's seat slide position to help determine the optimal deployment of the driver's airbag.

h Weight sensors in the front passenger's seat. The sensors are used for occupant classification to activate or deactivate the front passenger's airbag.
i Impact sensors that can detect a moderate-to-severe front or side impact.
j An indicator on the dashboard that alerts you that the front passenger's front airbag has been turned off.
k An indicator on the instrument panel that alerts you to a possible problem with your airbag system or seat belt tensioners.
l A rollover sensor that can detect if your vehicle is about to roll over and signal the control unit to deploy both side curtain airbags.

https://manual-hub.com/

Safe Driving

uuAirbagsuAirbag System Components

Important Facts About Your Airbags
Airbags can pose serious hazards. To do their job, airbags must inflate with tremendous force. So, while airbags help save lives, they can cause burns, bruises, and other minor injuries, sometimes even fatal ones if occupants are not wearing their seat belts properly and sitting correctly.
What you should do: Always wear your seat belt properly and sit upright and as far back from the steering wheel as possible while allowing full control of the vehicle. A front passenger should move their seat as far back from the dashboard as possible.

1Important Facts About Your Airbags Do not attempt to deactivate your airbags. Together, airbags and seat belts provide the best protection.
When driving, keep hands and arms out of the deployment path of the front airbag by holding each side of the steering wheel. Do not cross an arm over the airbag cover.

Remember, however, that no safety system can prevent all injuries or deaths that can occur in a severe crash, even when seat belts are properly worn and the airbags deploy.

Do not place hard or sharp objects between yourself and a front airbag. Carrying hard or sharp objects on your lap, or driving with a pipe or other sharp object in your mouth, can result in injuries if your front airbag inflates.

Do not attach or place objects on the front, driver's knee and front passenger's knee airbag covers. Objects on the covers marked SRS AIRBAG could interfere with the proper operation of the airbags or be propelled inside the vehicle and hurt someone if the airbags inflate.

https://manual-hub.com/

Safe Driving

uuAirbagsuTypes of Airbags

Types of Airbags
Your vehicle is equipped with four types of airbags: · Front airbags: Airbags in front of the driver's and front passenger's seats. · Knee airbags: Airbags under the steering column and under the glove box. · Side airbags: Airbags in the driver's and front passenger's seat-backs. · Side curtain airbags: Airbags above the side windows. Each is discussed in the following pages.

1Types of Airbags The airbags can inflate whenever the power mode is in ON.
After an airbag inflates in a crash, you may see a small amount of smoke. This is from the combustion process of the inflator material and is not harmful. People with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so.

Front Airbags (SRS)
The front SRS airbags inflate in a moderate-to-severe frontal collision to help protect the head and chest of the driver and/or front passenger.
SRS (Supplemental Restraint System) indicates that the airbags are designed to supplement seat belts, not replace them. Seat belts are the occupant's primary restraint system.
Housing Locations
The front airbags are housed in the center of the steering wheel for the driver, and in the dashboard for the front passenger. Both airbags are marked SRS AIRBAG.

1Front Airbags (SRS)
During a frontal crash severe enough to cause one or both front airbags to deploy, the airbags can inflate at different rates, depending on the severity of the crash, whether or not the seat belts are latched, and/ or other factors. Frontal airbags are designed to supplement the seat belts to help reduce the likelihood of head and chest injuries in frontal crashes.

https://manual-hub.com/

Safe Driving

uuAirbagsuFront Airbags (SRS)

Operation
Front airbags are designed to inflate during moderate-to-severe frontal collisions. When the vehicle decelerates suddenly, the sensors send information to the control unit which signals one or both front airbags to inflate.

A frontal collision can be either head-on or angled between two vehicles, or when a vehicle crashes into a stationary object, such as a concrete wall.

How the Front Airbags Work
While your seat belt restrains your torso, the front airbag provides supplemental protection for your head and chest.
The front airbags deflate immediately so that they won't interfere with the driver's visibility or the ability to steer or operate other controls.

1How the Front Airbags Work
Although the driver's and front passenger's airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy. This can happen if the severity of a collision is at the margin, or threshold, that determines whether or not the airbags will deploy. In such cases, the seat belt will provide sufficient protection, and the supplemental protection offered by the airbag would be minimal.

The total time for inflation and deflation is so fast that most occupants are not aware that the airbags deployed until they see them lying in front of them.

Continued
https://manual-hub.com/

Safe Driving

uuAirbagsuFront Airbags (SRS)
When front airbags should not deploy Minor frontal crashes: Front airbags were designed to supplement seat belts and help save lives, not to prevent minor scrapes, or even broken bones that might occur during a less than moderate-to-severe frontal crash. Side impacts: Front airbags can provide protection when a sudden deceleration causes a driver or front passenger to move toward the front of the vehicle. Side airbags and side curtain airbags have been specifically designed to help reduce the severity of injuries that can occur during a moderate-to-severe side impact which can cause the driver or passenger to move toward the side of the vehicle. Rear impacts: Head restraints and seat belts are your best protection during a rear impact. Front airbags cannot provide any significant protection and are not designed to deploy in such collisions. Rollovers: In a rollover, your best form of protection is a seat belt or, if your vehicle is equipped with a rollover sensor, both a seat belt and a side curtain airbag. Front airbags, however, are not designed to deploy in a rollover as they would provide little if any protection. When front airbags deploy with little or no visible damage Because the airbag system senses sudden deceleration, a strong impact to the vehicle framework or suspension might cause one or more of the airbags to deploy. Examples include running into a curb, the edge of a hole, or other low fixed object that causes a sudden deceleration in the vehicle chassis. Since the impact is underneath the vehicle, damage may not be readily apparent. When front airbags may not deploy, even though exterior damage
appears severe Since crushable body parts absorb crash energy during an impact, the amount of visible damage does not always indicate proper airbag operation. In fact, some collisions can result in severe damage but no airbag deployment because the airbags would not have been needed or would not have provided protection even if they had deployed.
58
https://manual-hub.com/

Safe Driving

uuAirbagsuFront Airbags (SRS)

Advanced Airbags
The airbags have advanced features to help reduce the likelihood of airbag related injuries to smaller occupants.
The driver's advanced airbag system includes a seat position sensor.

Driver's Seat Position Sensor

Based on information from this sensor and the severity of the impact, the advanced airbag system determines the optimal deployment of the driver's airbag.
The front passenger's advanced airbag system has weight sensors. The sensors are used for occupant classification to activate or deactivate the front passenger's airbag.

Passenger's Seat Weight Sensors

For adult size occupants, the system will automatically activate the front passenger's airbag. If a small adult sits in the front passenger seat and the system does not recognize him/her as an adult, see
2 Passenger Airbag Off Indicator P. 68

1Advanced Airbags
If there is a problem with the driver's seat position sensor or the passenger's seat weight sensors, the SRS indicator will come on, and in the event of a crash, the airbag will deploy (regardless of the driver's seating position or passenger's occupant classification) with a force corresponding to the severity of the impact.
2 Supplemental Restraint System (SRS) Indicator P. 67
For the advanced front airbags to work properly, confirm that:
· The occupant is sitting in an upright position,
wearing the seat belt properly and the seat-back is not excessively reclined.
· The occupant is not leaning against the door or
center console.
· The occupant's feet are placed on the floor in front
of them.
· There are no objects hanging from the front
passenger's seat.
· Only small, lightweight objects are in the seat-back
pocket.
· The steering wheel and passenger's side dashboard
are not obstructed by any object.
· No liquid has been spilled on or under the seat.

Continued
https://manual-hub.com/

Safe Driving

uuAirbagsuFront Airbags (SRS)

We advise against allowing a child age 12 or under to ride in the front passenger's seat. However, if you do allow a small child or infant to ride in the front passenger's seat, the system is designed to automatically deactivate the front passenger's airbag. Do not let a small child or infant ride in the front passenger's seat if the airbag does not automatically deactivate.

1Advanced Airbags
· There is no child seat or other object pressing
against the rear of the seat or seat-back.
· There is no rear passenger pushing or pulling on
the back of the front passenger's seat.
· There are no objects placed under or beside the
front passenger's seat. Improperly positioned objects can interfere with the advanced airbag sensors.
· The head restraint is not contacting the roof.
2 Passenger Airbag Off Indicator P. 68
· The floor mat behind the front passenger's seat is
set in the correct position evenly on the floor. An improperly placed mat can interfere with the advanced airbag sensors.
2 Floor Mats P. 578

https://manual-hub.com/

Safe Driving

uuAirbagsuKnee Airbags

Knee Airbags
The knee SRS airbags inflate in a moderate-to-severe frontal collision to help keep the driver and/or front passenger in the proper position and to help maximize the benefit provided by the vehicle's other safety features.

SRS (Supplemental Restraint System) indicates that the airbags are designed to supplement seat belts, not replace them. Seat belts are the occupant's primary restraint system.

Housing Locations

The knee airbag for the driver and the one for the front passenger are housed under the steering column and the glove box respectively.

1Knee Airbags Do not attach accessories on or near the knee airbags as they can interfere with the proper operation of the airbags, or even hurt someone if the airbags inflate.
The driver and front passenger should not store any items under the seat or behind their feet. The items can interfere with proper airbag deployment in the event of a moderate to severe frontal collision and may result in inadequate protection.

Housing Location

Both are marked SRS AIRBAG.

Housing Location

Continued
https://manual-hub.com/

Safe Driving

uuAirbagsuKnee Airbags

Operation

When inflated

The driver's and front passenger's knee airbag deploy at the same time as the driver's and front passenger's airbag respectively.

Knee Airbag

Even if the collision is not severe enough to deploy the front airbags, the knee airbags may inflate alone.

When inflated

Knee Airbag

https://manual-hub.com/

Safe Driving

When knee airbags deploy with little or no visible damage Because the airbag system senses sudden deceleration, a strong impact to the vehicle framework or suspension might cause one or more of the airbags to deploy. Examples include running into a curb, the edge of a hole, or other low fixed object that causes a sudden deceleration in the vehicle chassis. Since the impact is underneath the vehicle, damage may not be readily apparent.
When knee airbags may not deploy, even though exterior damage appears severe
Since crushable body parts absorb crash energy during an impact, the amount of visible damage does not always indicate proper airbag operation. In fact, some collisions can result in severe damage but no airbag deployment because the airbags would not have been needed or would not have provided protection even if they had deployed.

uuAirbagsuKnee Airbags

https://manual-hub.com/

Safe Driving

uuAirbagsuSide Airbags

Side Airbags
The side airbags help protect the torso and pelvis of the driver or a front passenger during a moderate-to-severe side impact.

Housing Locations

The side airbags are housed in the outside edge of the driver's and passenger's seatbacks.

Both are marked SIDE AIRBAG.

Housing Location

1Side Airbags Make sure you and your front seat passenger always sit upright. Leaning into the path of a side airbag can prevent the airbag from deploying properly and increases your risk of serious injury.
Do not attach accessories on or near the side airbags. They can interfere with the proper operation of the airbags, or hurt someone if an airbag inflates.
Do not cover or replace the front seat-back covers without consulting a dealer. Improperly replacing or covering front seat-back covers can prevent your side airbags from properly deploying during a side impact.

Operation

When inflated

When the sensors detect a moderate-tosevere side impact, the control unit signals the side airbag on the impact side to immediately inflate.

Side Airbag

https://manual-hub.com/

Safe Driving

When a side airbag deploys with little or no visible damage Because the airbag system senses sudden acceleration, a strong impact to the side of the vehicle's framework can cause a side airbag to deploy. In such cases, there may be little or no damage, but the side impact sensors detected a severe enough impact to deploy the airbag.
When a side airbag may not deploy, even though visible damage appears severe
It is possible for a side airbag not to deploy during an impact that results in apparently severe damage. This can occur when the point of impact was toward the far front or rear of the vehicle, or when the vehicle's crushable body parts absorbed most of the crash energy. In either case, the side airbag would not have been needed nor provided protection even if it had deployed.

uuAirbagsuSide Airbags

https://manual-hub.com/

Safe Driving

uuAirbagsuSide Curtain Airbags

Side Curtain Airbags
The side curtain airbags help protect the heads of the driver and passengers in the outer seating positions during a moderate-to-severe side impact. The side curtain airbags equipped in this vehicle are also designed to help reduce the likelihood of partial and complete ejection of vehicle occupants through side windows in crashes, particularly rollover crashes.

Housing Locations

The side curtain airbags are located in the ceiling above the side windows on both sides of the vehicle.

1Side Curtain Airbags If the SRS control unit senses that your vehicle is about to rollover, it immediately deploys both side curtain airbags and activates both front seat belt tensioners.
If the impact is on the passenger's side, the passenger's side curtain airbag deploys even if there are no occupants on that side of the vehicle.
To get the best protection from the side curtain airbags, occupants should wear their seat belts properly and sit upright and well back in their seats.

Side Curtain Airbag Storage

Do not attach any objects to the side windows or roof pillars as they can interfere with the proper operation of the side curtain airbags.

Operation

The side curtain airbag is designed to deploy in a rollover or a moderate-to-severe side impact.

Deployed Side Curtain Airbag
66

https://manual-hub.com/

Safe Driving

uuAirbagsuAirbag System Indicators

When side curtain airbags deploy in a frontal collision One or both side curtain airbags may also inflate in a moderate-to-severe angled frontal collision.
Airbag System Indicators
If a problem occurs in the airbag system, the SRS indicator will come on and a message appears on the driver information interface.
Supplemental Restraint System (SRS) Indicator
When the power mode is set to ON The indicator comes on for a few seconds, then goes off. This tells you the system is working properly.

1Supplemental Restraint System (SRS) Indicator
3 WARNING
Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly.
Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.

If the indicator comes on at any other time, or does not come on at all, have the system checked by a dealer as soon as possible. If you don't, your airbags and seat belt tensioners may not work properly when they are needed.

Continued
https://manual-hub.com/

Safe Driving

uuAirbagsuAirbag System Indicators

Passenger Airbag Off Indicator

When the passenger airbag off

U.S.

Canada

indicator comes on

The indicator comes on to alert you that the

passenger's airbag has been turned off.

This occurs if the seat is empty or when the

weight sensors determine that a small child or

infant is on the passenger seat.

Children age 12 or under should always ride properly restrained in a back seat.
2 Child Safety P. 71
If the indicator is on in the event of a crash, the passenger's airbag will not deploy. The passenger's knee airbag will not deploy, either.

1Passenger Airbag Off Indicator
To ensure the passenger is detected properly, confirm that:
· The occupant is sitting in an upright position,
wearing the seat belt properly and the seat-back is not excessively reclined.
· The occupant is not leaning against the door or
center console.
· The occupant's feet are placed on the floor in front
of them.
· There are no objects hanging from the front
passenger's seat.
· Only small, lightweight objects are in the seat-back
pocket.
· No liquid has been spilled on or under the seat. · There is no child seat or other object pressing
against the rear of the seat or seat-back.
· There is no rear passenger pushing or pulling on
the back of the front passenger's seat.
· There are no objects placed under or beside the
front passenger's seat. Improperly positioned objects can interfere with the advanced airbag sensors.
· The floor mat behind the front passenger's seat is
set in the correct position evenly on the floor. An improperly placed mat can interfere with the advanced airbag sensors.
· The head restraint is not contacting the roof.

https://manual-hub.com/

Safe Driving

uuAirbagsuAirbag System Indicators
1Passenger Airbag Off Indicator The passenger airbag off indicator may come on and go off periodically if the total weight on the seat is near the airbag cutoff threshold. For a small adult, depending on physique and posture, the system may not recognize him/her as an adult and thus deactivate the passenger's airbag. If this occurs, please confirm that the conditions set forth in the above bullet points on the previous page are met. If the above conditions are met and the indicator is still on, then with the transmission in park, turn the ignition off and back on.
Have your vehicle checked by a dealer as soon as possible if:
· All of the above conditions are met, and the
indicator comes on with an adult seated in the front passenger seat.
· The seat is empty and the indicator is off.
Do not allow an adult passenger to ride in the front seat when the indicator is on.

https://manual-hub.com/

Safe Driving

uuAirbagsuAirbag Care

Airbag Care
You do not need to, and should not, perform any maintenance on or replace any airbag system components yourself. However, you should have your vehicle inspected by a dealer in the following situations:
When the airbags have deployed If an airbag has inflated, the control unit and other related parts must be replaced. Similarly, once an automatic seat belt tensioner has been activated, it must be replaced.

1Airbag Care
We recommend against the use of salvaged airbag system components, including the airbag, tensioners, sensors, and control unit.

When the vehicle has been in a moderate-to-severe collision Even if the airbags did not inflate, have your dealer inspect the following: the driver's seat position sensor, weight sensors in the passenger's seat, front seat belt tensioners, and each seat belt that was worn during the crash.

Do not remove or modify a front seat without consulting a dealer This would likely disable or affect the proper operation of the driver's seat position sensor or the weight sensors in the passenger's seat. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, contact a Honda dealer, or for U.S. vehicles, American Honda Automobile Customer Service at 1-800999-1009 and for Canadian vehicles, Honda Canada Customer Relations at 1-8889-HONDA-9.

https://manual-hub.com/

Safe Driving

Child Safety

Protecting Child Passengers
Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle crashes are the number one cause of death of children ages 12 and under.
To reduce the number of child deaths and injuries, every state, Canadian province and territory requires that infants and children be properly restrained when they ride in a vehicle.
Children should sit properly restrained in a rear seat. This is because: · An inflating front airbag can injure or kill a child sitting in the front seat.

1Protecting Child Passengers
3 WARNING
Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.
Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt, using a booster seat if necessary.

· A child in the front seat is more likely to interfere with the driver's ability to safely control the vehicle.
· Statistics show that children of all sizes and ages are safer when they are properly restrained in a rear seat.

The National Highway Traffic Safety Administration and Transport Canada recommend that all children ages 12 and under be properly restrained in a rear seat. Some states or provinces/territories have laws restricting where children may ride.

Continued
https://manual-hub.com/

Safe Driving

uuChild SafetyuProtecting Child Passengers

· Never hold a child on your lap because it is impossible to protect them in the event of a collision.
· Never put a seat belt over yourself and a child. During a crash, the belt would likely press deep into the child and cause serious or fatal injuries.
· Never let two children use the same seat belt. Both children could be very seriously injured in a crash.
· Any child who is too small to wear a seat belt correctly must be restrained in an approved child seat that is properly secured to the vehicle using either the seat belt or the lower anchors of the LATCH system.
· Do not allow children to operate the doors, windows, or seat adjustments.

1Protecting Child Passengers
3 WARNING
Allowing a child to play with a seat belt or wrap one around their neck can result in serious injury or death.
Instruct children not to play with any seat belt and make sure any unused seat belt a child can reach is buckled, fully retracted, and locked.
To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all the way.

· Do not leave children in the vehicle unattended, especially in hot weather when the inside of the vehicle can get hot enough to kill them. They could also activate vehicle controls causing it to move unexpectedly.

To remind you of the passenger's front airbag hazards and child safety, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.
2 Safety Labels P. 85

https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

Safety of Infants and Small Children
Protecting Infants
An infant must be properly restrained in a rear-facing child seat until the infant reaches the seat manufacturer's weight or height limit for the seat.
Positioning a rear-facing child seat Child seats must be placed and secured in a rear seating position.

1Protecting Infants
3 WARNING
Placing a rear-facing child seat in the front seat can result in serious injury or death during a crash.
Always place a rear-facing child seat in the rear seat, not the front.

When properly installed, a rear-facing child seat may prevent the driver or a front passenger from moving their seat all the way back, or from locking their seat-back in the desired position. Make sure that there is no contact between the child seat and the seat in front of it.
It can also interfere with proper operation of the passenger's advanced front airbag system.
2 Airbags P. 53
If this occurs, we recommend that you install the child seat directly behind the front passenger's seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.

Experts recommend use of a rear-facing seat for a child so long as the child's height and weight are appropriate for a rear-facing seat.
Infants should never be seated in a forward-facing position.
Always refer to the child seat manufacturer's instructions before installation.
Do not allow a front seat to rest against a child seat installed in a rear seating position. The weight sensor in the front seat may not correctly detect the actual weight of the occupant.

Continued
https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

Protecting Smaller Children
If a child has exceeded the weight and height limitations of a rear-facing child seat, the child should be properly restrained in a firmly secured forward-facing child seat until they exceed the weight and height limitations for the forward-facing child seat.
Forward-facing child seat placement We strongly recommend placing a forwardfacing child seat in a rear seating position.

1Protecting Smaller Children
3 WARNING
Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.
If you must place a forward-facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.

Placing a forward-facing child seat in the front seat can be hazardous, even with advanced front airbags that automatically turn the passenger's front airbag off. A rear seat is the safest place for a child.

Educate yourself about the laws and regulations regarding child seat use where you are driving, and follow the child seat manufacturer's instructions.

https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

Selecting a Child Seat
Most child seats are LATCH-compatible (Lower Anchors and Tethers for Children). Some have a rigid-type connector while others have a flexible-type connector. Both are equally easy to use. Some existing and previously owned child seats can only be installed using the seat belt. Whichever type you choose, follow the child seat manufacturer's use and care instructions including recommended expiration dates as well as the instructions in this manual. Proper installation is key to maximizing your child's safety.

1Selecting a Child Seat Installation of a LATCH-compatible child seat is simple.
LATCH-compatible child seats have been developed to simplify the installation process and reduce the likelihood of injuries caused by incorrect installation.

In seating positions and vehicles not equipped with LATCH, a LATCH-compatible child seat can be installed using the seat belt and a top tether for added security. This is because all child seats are required to be designed so that they can be secured with a lap belt or the lap part of a lap/shoulder belt. In addition, the child seat manufacturer may advise that a seat belt be used to attach a LATCH-compatible seat once a child reaches a specified weight. Please read the child seat owner's manual for proper installation instructions.
Important consideration when selecting a child seat Make sure the child seat meets the following three requirements: · The child seat is the correct type and size for the child. · The child seat is the correct type for the seating position. · The child seat is compliant with Federal Motor Vehicle Safety Standard 213 or
Canadian Motor Vehicle Safety Standard 213.

Continued
https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

Installing a LATCH-Compatible Child Seat
A LATCH-compatible child seat can be installed in either of the two outer rear seats. A child seat is attached to the lower anchors with either the rigid or flexible type of connectors.
1. Locate the anchor marks affixed to the base of the seat cushion.
2. Pull out the anchor covers under the marks to expose the lower anchors.
Marks
Covers

Lower Anchors Rigid Type

3. Place the child seat on the vehicle seat, then attach the child seat to the lower anchors according to the instructions that came with the child seat. u When installing the child seat, make sure that the lower anchors are not obstructed by the seat belt or any other object.

1Installing a LATCH-Compatible Child Seat
3 WARNING
Never attach two child seats to the same anchor. In a collision, one anchor may not be strong enough to hold two child seat attachments and may break, causing serious injury or death.
For your child's safety, when using a child seat installed using the LATCH system, make sure that the child seat is properly secured to the vehicle. A child seat that is not properly secured will not adequately protect a child in a crash and may cause injury to the child or other vehicle occupants.

https://manual-hub.com/

uuChild SafetyuSafety of Infants and Small Children

Safe Driving

Flexible Type

Straight top tether type

Tether Strap Hook

Other top tether type

Anchor
Tether Strap Hook

Anchor

1Installing a LATCH-Compatible Child Seat
3 WARNING
Using the outer rear seats' inner anchors to secure a LATCH-compatible child seat in the center seating position may result in failure of the child seat, causing injury or death.

4. Open the tether anchor cover behind the head restraint.
5. Raise the head restraint to its highest position, then route the tether strap between the head restraint legs, and secure the tether strap hook to the anchor.
6. Tighten the tether strap as instructed by the child seat manufacturer.
7. Make sure the child seat is firmly secured by rocking it forward and back and side to side; little movement should be felt.
8. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.

Only use the outer rear seats' inner anchors to install a child seat in the center seating position if the manufacturer's instructions expressly permit.
Installing a LATCH-compatible child seat in the rear center seat Each outer rear seat is equipped with a pair of lower anchors which are used to secure a LATCH-compatible child seat. The rear center seat, however, is not equipped with anchors of any kind. The inner and outer anchors are spaced apart at a standard distance of 11 inches (280 mm). The distance between the two inner anchors is 15.4 inches (390 mm). LATCH-compatible restraint systems that are fitted with rigid-type attachments cannot be installed in the rear center seat. However, a system fitted with flexibletype attachments can be installed in the center seat, provided that the manufacturer's instructions for that system permit the use of the inner anchors with the stated spacing. Before seating a child, make sure that the system is properly attached to both the lower anchors and tether anchors.

Continued
https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

Installing a Child Seat with a Lap/Shoulder Seat Belt
A child seat can be installed with a lap/shoulder belt in any rear seat or, if absolutely necessary, the front passenger seat.
1. Place the child seat on the vehicle seat. 2. Route the seat belt through the child seat
according to the seat manufacturer's instructions, and insert the latch plate into the buckle. u Insert the latch plate fully until it clicks.

1Installing a Child Seat with a Lap/Shoulder Seat Belt
A child seat that is not properly secured will not adequately protect a child in a crash and may cause injury to the child or other vehicle occupants.

3. Slowly pull the shoulder part of the belt all the way out until it stops. This activates the lockable retractor.
4. Let the seat belt retract a few inches and check that the retractor has switched modes by pulling on the webbing. It should not pull out again until it is reset by removing the latch plate from the buckle. u If you are able to pull the shoulder belt out, the lockable retractor is not activated. Slowly pull the seat belt all the way out, and repeat steps 3 4.

https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

5. Grab the shoulder part of the seat belt near the buckle, and pull up to remove any slack from the lap part of the belt. u When doing this, place your weight on the child seat and push it into the vehicle seat.

1Installing a Child Seat with a Lap/Shoulder Seat Belt
To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all the way.

6. Make sure the child seat is firmly secured by rocking it forward and back and side to side; less than one inch of movement should occur near the seat belt.
7. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.

Continued
https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

Adding Security with a Tether

Tether Anchor Points

A tether anchor point is provided behind each rear seating position. If you have a child seat that comes with a tether but can be installed with a seat belt, the tether may be used for additional security.

1Adding Security with a Tether
Always use a tether for forward-facing child seats whether using the seat belt or lower anchors.

Cover

Anchor
Straight top tether type
Other top tether type

Tether Strap Hook
Anchor Tether Strap Hook

Using an outer anchor 1. Locate the appropriate tether anchor point
and open the anchor cover. 2. Raise the head restraint to its highest
position, then route the tether strap through the head restraint legs. Make sure the strap is not twisted. 3. Secure the tether strap hook to the anchor. 4. Tighten the tether strap as instructed by the child seat manufacturer.

Anchor
80

https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Infants and Small Children

Straight top tether type

Tether Strap Hook

Other top tether type

Anchor
Tether Strap Hook

Using the center anchor 1. Lower the head restraint to its lowest
position. 2. Open the anchor cover.
3. Straight top tether type Route the tether strap over the head restraint. Make sure the strap is not twisted.
Other top tether type
Route the tether strap outside the head restraint. Make sure the strap is not twisted. 4. Secure the tether strap hook to the anchor. 5. Tighten the tether strap as instructed by the child seat manufacturer.

Anchor

https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Larger Children

Safety of Larger Children
Protecting Larger Children
The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a child who must sit in front.

Checking Seat Belt Fit

When a child is too big for a child seat, secure the child in a rear seat using the lap/

shoulder seat belt. Have the child sit upright and all the way back, then answer the

following questions.

Checklist

· Do the child's knees bend comfortably over

the edge of the seat?

· Does the shoulder belt cross between the

child's neck and arm?

· Is the lap part of the seat belt as low as

possible, touching the child's thighs?

· Will the child be able to stay seated like this

for the whole trip?

If you answer yes to all these questions, the child is ready to wear the lap/shoulder

seat belt correctly. If you answer no to any question, the child needs to ride on a

booster seat until the seat belt fits properly without a booster seat.

1Safety of Larger Children
3 WARNING
Allowing a child age 12 or under to sit in front can result in injury or death if the passenger's front airbag inflates.
If a larger child must ride in front, move the vehicle seat as far to the rear as possible, have the child sit up properly and wear the seat belt properly, using a booster seat if needed.

https://manual-hub.com/

Safe Driving

uuChild SafetyuSafety of Larger Children

Booster Seats

If a lap/shoulder seat belt cannot be used properly, position the child in a booster seat in the rear seat. For the child's safety, check that the child meets the booster seat manufacturer's recommendations.

1Booster Seats
When installing a booster seat, make sure to read the instructions that came with it, and install the seat accordingly. There are high- and low-type booster seats. Choose a booster seat that allows the child to wear the seat belt correctly.

Protecting Larger Children - Final Checks
Your vehicle has a rear seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front: · Make sure you read and fully understand the instructions and safety information
in this manual. · Move the front passenger seat as far back as possible. · Have the child sit upright and well back in the seat. · Check that the seat belt is properly positioned so that the child is secure in the
seat.

Some U.S. states and Canadian provinces and territories require children to use a booster seat until they reach a given age or weight (e.g. 6 years or 60 lbs). Be sure to check current laws in the state or province, or territory where you intend to drive.

Monitoring child passengers We strongly recommend that you keep an eye on child passengers. Even older, more mature children sometimes need to be reminded to fasten their seat belts and sit up properly.

https://manual-hub.com/

Safe Driving

Exhaust Gas Hazard

Carbon Monoxide Gas
The engine exhaust from this vehicle contains carbon monoxide, a colorless, odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon monoxide gas will not get into the interior.
Have the exhaust system inspected for leaks whenever · The exhaust system is making an unusual noise. · The exhaust system may have been damaged. · The vehicle is raised for an oil change.
When you operate a vehicle with the trunk open, airflow can pull exhaust gas into the interior and create a hazardous condition. If you must drive with the trunk open, open all the windows and set the climate control system as shown below.
1. Select the fresh air mode. 2. Select the mode. 3. Set the fan speed to high. 4. Set the temperature control to a comfortable setting.

1Carbon Monoxide Gas
3 WARNING
Carbon monoxide gas is toxic.
Breathing it can cause unconsciousness and even kill you.
Avoid any enclosed areas or activities that expose you to carbon monoxide.
An enclosed area such as a garage can quickly fill up with carbon monoxide gas. Do not turn the power system on with the garage door closed. Even when the garage door is open, drive out of the garage immediately after turning the power system on.

Adjust the climate control system in the same manner if you sit in your parked vehicle with the engine running.

https://manual-hub.com/

Safety Labels
Label Locations
These labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels carefully.
If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact a dealer for a replacement.

Sun Visor U.S. models

Canadian models

High Voltage System Components

U.S. models

Canadian models

Safe Driving

Dashboard U.S. models only

Air Conditioner System

U.S. models

Canadian models

Inverter Coolant Filler Tank Cap
Radiator Cap

https://manual-hub.com/

This page intentionally left blank.

https://manual-hub.com/

Instrument Panel
This chapter describes the buttons, indicators, and gauges that are used while driving.

* Not available on all models

https://manual-hub.com/

Indicators ............................................ 88 Driver Information Interface Warning and Information Messages.................... 115
Gauges and Displays Gauges............................................ 141 Driver Information Interface ............. 143 Head-Up Display* ............................ 166
87

Indicators

Instrument Panel

U.S.
*1
Canada

Parking Brake and Brake System Indicator (Red)

P. 89

U.S. *1 Canada
*1

Parking Brake and Brake System Indicator (Amber)
Automatic Brake Hold System Indicator

P. 90 P. 95

U.S. *1 Canada
*1
*1

Automatic Brake Hold Indicator
Malfunction Indicator Lamp 12-Volt Battery Charging System Indicator

Shift Position Indicator

Deceleration Paddle Selector Indicator
Transmission System Indicator

READY Indicator

POWER SYSTEM
*1
Indicator

P. 95
P. 96
P. 97 P. 97 P. 97 P. 98 P. 94 P. 93

Seat Belt Reminder Indicator
Low Fuel Indicator

P. 99 P. 100

Anti-lock Brake System
*1
(ABS) Indicator

P. 100

Supplemental Restraint
*1
System Indicator

P. 100

*1 Auto High-Beam Indicator

P. 100

Vehicle Stability AssistTM
(VSA®) System Indicator

P. 101

Vehicle Stability AssistTM
(VSA®) OFF Indicator

P. 102

*1 Electric Power Steering (EPS) System Indicator

P. 102

Low Tire Pressure/TPMS
*1

P. 103

Indicator

Turn Signal and Hazard Warning Indicators
High Beam Indicator Lights On Indicator Fog Light Indicator*

P. 104
P. 104 P. 104 P. 104

System Message Indicator

P. 106

ECON Mode Indicator P. 107

SPORT Mode Indicator P. 108

*1 EV Indicator

P. 94

*1 EV Mode Indicator

P. 94

Cruise Mode Indicator P. 109
(White/Green)

Adaptive Cruise Control

(ACC) with Low Speed Follow Indicator

P. 109

(Amber)

Adaptive Cruise Control

(ACC) with Low Speed Follow Indicator

P. 109

(White/Green)

*1 Lane Keeping Assist System (LKAS)

P. 110

Indicator (Amber)

Lane Keeping Assist
System (LKAS) Indicator P. 110
(White/Green)

*1 Safety Support Indicator (Amber) Safety Support Indicator (Green/Gray)

P. 111 P. 114

Immobilizer System Indicator Security System Alarm Indicator

P. 105 P. 105

*1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the power system has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the owner's manual.

88 * Not available on all models

https://manual-hub.com/

uu Indicators u

Instrument Panel

Indicator

Name

On/Blinking

Explanation

U.S. Canada
(Red)

Parking Brake and Brake System Indicator (Red)

· Comes on when the parking brake is applied, and goes off when it is released.
· Comes on when the brake fluid level is low.
· Comes on if there is a problem with the brake system.
· The beeper sounds and the indicator comes on if you drive with the parking brake applied.
· Comes on for about 30 seconds when you apply the electric parking brake while the power mode is in ACCESSORY or VEHICLE OFF, then goes off.
· Stays on for about 30 seconds when you set the power mode to VEHICLE OFF while the electric parking brake is applied, then goes off.

· Comes on while driving - Make sure the parking brake is released. Check the brake fluid level.
2 What to do when the indicator comes on while driving P. 611
· Comes on along with the Parking Brake and Brake System Indicator (Amber) - Immediately stop in a safe place. Contact a dealer for repair. The brake pedal becomes harder to operate. Depress the pedal further than you normally do.
2 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On P. 612
· Comes on along with the ABS indicator - Have your vehicle checked by a dealer.
2 If the Brake System Indicator (Red) Comes On or Blinks P. 611
· Blinks and the Parking Brake and Brake System Indicator (Amber) comes on at the same time - There is a problem with the electric parking brake system. The parking brake may not be set. Avoid using the parking brake and have your vehicle checked by a dealer immediately.
2 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On P. 612

https://manual-hub.com/

Message Continued 89

uu Indicators u

Indicator

Name

On/Blinking

Explanation

U.S. Canada

Parking Brake and Brake System Indicator (Amber)

· Comes on if there is a problem with a system related to braking other than the conventional brake system.
· Comes on if there is a problem with the cooperative control with regenerative braking, the electric servo brake system, or the hill start assist system.

· Comes on while driving - Avoid high speeds and sudden braking. Take the vehicle to a dealer immediately.

(Amber)

Message
U.S. Canada

Instrument Panel

https://manual-hub.com/

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking

Explanation

· Comes on if there is a problem · Stays on constantly - Avoid using the

with the electric parking brake

parking brake and have your vehicle

system and/or the automatic brake checked by a dealer immediately.

hold system.

Message
U.S.

U.S.

Canada

Parking Brake and Brake System Indicator (Amber)

(Amber)

Canada

https://manual-hub.com/

Continued 91

uu Indicators u

Indicator

Name

On/Blinking

U.S. Canada

Parking Brake and Brake System Indicator (Amber)

· Comes on if there is a problem with the radar sensor.
· Indicator may come on temporarily when the Maximum Load Limit is exceeded.

Explanation
· Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit P. 413
· Stays on constantly - Have your vehicle checked by a dealer.

(Amber)

Message --

Instrument Panel

https://manual-hub.com/

uu Indicators u

Indicator

Name

On/Blinking

Explanation

· Comes on if there is a problem with · Have your vehicle checked by a dealer. the electric vehicle system.
· Comes on when the High Voltage battery temperature becomes high.

Message

POWER SYSTEM Indicator

Instrument Panel

https://manual-hub.com/

Continued 93

uu Indicators u

Indicator

Name

READY Indicator

On/Blinking
· Comes on when the vehicle is ready to drive.

Explanation
2 Turning on the Power P. 416

EV Indicator
EV Mode Indicator

· Comes on when the vehicle is moved by the motor, and the engine is not operating.
· Comes on when the vehicle is in EV mode.

--
2 SPORT HYBRID i-MMD (intelligent Multi-Mode Drive) P. 12

Message --

Instrument Panel

https://manual-hub.com/

Indicator

Name

Automatic Brake Hold System Indicator

U.S.

Canada

Automatic Brake Hold Indicator

On/Blinking · Comes on when the automatic
brake hold system is on.
· Comes on when the automatic brake hold is activated.

Explanation
2 Automatic Brake Hold P. 508
2 Automatic Brake Hold P. 508

uu Indicators u
Message
--

Instrument Panel

https://manual-hub.com/

Continued 95

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking

Explanation

· After you have set the power mode to ON, the vehicle performs system checks. However, if the readiness codes have not been set by that time, this indicator will blink five times and then go off.

· Readiness codes are part of the on-board diagnostics for the emissions control systems.
2 Testing of Readiness Codes P. 631

· Comes on if there is a problem with the emissions control systems.
· Blinks when a misfire in the engine's cylinders is detected.

Malfunction Indicator Lamp

2 If the Malfunction Indicator Lamp Comes On or Blinks P. 610

Message --

https://manual-hub.com/

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking

Explanation

12-Volt Battery Charging System Indicator

· Comes on when there is a problem with the charging system.

· Stop in a safe place and contact a dealer immediately.
2 Checking the 12-Volt Battery P. 573 2 If the 12-Volt Battery Charging
System Indicator Comes On P. 610

Shift Position Indicator

· Indicates the current shift position.

2 Shifting P. 423

· Comes on when the paddle selector

is pulled.

Deceleration Paddle Selector Indicator

· Blinks when the deceleration does not occur while pulling the paddle selector.
· Comes on with M when SPORT

mode is selected and pulling the

paddle selector.

2 Deceleration Paddle Selector P. 430

Message -- --

https://manual-hub.com/

Continued 97

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking
· The current shift position blinks if the transmission system has a problem.

Explanation
· Blinks while driving - Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately.

Message

Transmission System Indicator

· The current shift position or all the · Immediately park your car in a safe place.

shift positions blink if there is a

2 Emergency Towing P. 620

problem with the transmission and · Have your vehicle checked by a dealer.

the vehicle is no longer able to run.

· The current shift position or all the shift positions blink if there is a problem with the transmission and it is not possible to select (P.

· While the vehicle is stopped, apply the parking brake.
· Have your vehicle checked by a dealer immediately.

https://manual-hub.com/

Instrument Panel

uu Indicators u

Indicator

Name

Seat Belt Reminder Indicator

On/Blinking

Explanation

· Blinks and the beeper sounds for a few seconds if you are not wearing a seat belt when you set the power mode to ON, then the indicator comes on.
· If the front passenger is not wearing a seat belt, the indicator comes on a few seconds later.
· Comes on for a while when the rear seat belt is unfastened while the power mode in ON.
· Blinks while driving if you and/or any passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.

· The beeper stops and the indicator goes off when you and the passengers fasten their seat belts.
· Stays on after you and/or the passengers have fastened the seat belt(s) - A detection error may have occurred in the sensor. Have your vehicle checked by a dealer.
2 Seat Belt Reminder P. 46

Message

https://manual-hub.com/

Continued 99

uu Indicators u

Indicator

Name

Low Fuel Indicator

On/Blinking

Explanation

· Comes on when the fuel reserve is running low (approximately 1.6 U.S. gal./6.2 Liter left).
· Blinks if there is a problem with the fuel gauge.

· Comes on - Refuel your vehicle as soon as possible.
· Blinks - Have your vehicle checked by a dealer.

Message

Instrument Panel

Anti-lock Brake System (ABS) Indicator

· Comes on if there is a problem with the ABS.

· Stays on constantly - Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.
2 Anti-lock Brake System (ABS) P. 510

Supplemental Restraint System Indicator

· Comes on if a problem with any of the following is detected: - Supplemental restraint system - Side airbag system - Side curtain airbag system - Seat belt tensioner

· Stays on constantly - Have your vehicle checked by a dealer.

Auto High-

· Comes on when all the operating

Beam Indicator conditions of the auto high-beam are met.

2 Auto High-Beam P. 205

100

https://manual-hub.com/

uu Indicators u

Indicator

Name

On/Blinking

Explanation

Vehicle Stability AssistTM (VSA®) System Indicator

Blinks when VSA® is active. Comes on if there is a problem with
the VSA® system.
Comes on if the VSA® system is deactivated temporarily after the 12-volt battery has been disconnected, then re-connected.

Stays on constantly - Have your vehicle checked by a dealer.
2 Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System P. 435
Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.

Message

Instrument Panel

https://manual-hub.com/

Continued 101

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking
· Comes on when you partially disable VSA®.

Explanation
2 VSA® On and Off P. 436

Vehicle Stability AssistTM (VSA®) OFF Indicator

· Comes on if the VSA® system is deactivated temporarily after the 12-volt battery has been disconnected, then re-connected.

· Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.

Message

Electric Power Steering (EPS) System Indicator

· Comes on if there is a problem with the EPS system.

· Stays on constantly - Have your vehicle checked by a dealer.
2 If the Electric Power Steering (EPS) System Indicator Comes On P. 613

102

https://manual-hub.com/

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking

Explanation

Low Tire Pressure/TPMS Indicator

· May come on briefly if the power · Comes on while driving - Stop in a safe

mode is set to ON and the vehicle is place, check tire pressures, and inflate the

not moved within 45 seconds, to

tire(s) if necessary.

indicate the calibration process is · Stays on after the tires are inflated to

not yet complete.

the recommended pressures - The

· Comes on and stays on when:

system needs to be calibrated.

- One or more tires' pressures are

2 TPMS Calibration P. 439

determined to be significantly low.

- The system has not been

calibrated.

· Blinks for about one minute, and · Blinks and remains on - Have your then stays on if there is a problem vehicle checked by a dealer. with the TPMS.

Message

· Comes on if the TPMS is deactivated temporarily after the 12-volt battery has been disconnected, then re-connected.

· Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.

https://manual-hub.com/

Continued 103

uu Indicators u

Indicator

Name

On/Blinking

Explanation

Turn Signal and Hazard Warning Indicators

· Blinks when you operate the turn signal lever.
· Blink along with all turn signals when you press the hazard warning button.

· Does not blink or blinks rapidly
2 Replacing Light Bulbs P. 556

High Beam Indicator

· Comes on when the high beam headlights are on.

Lights On Indicator

· Comes on when the parking, tail, and other external lights are on.

2 Light Switches P. 201

Fog Light Indicator*

· Comes on when the fog lights are on.

2 Fog Lights* P. 203

Message --
-- -- --

Instrument Panel

104 * Not available on all models

https://manual-hub.com/

Instrument Panel

uu Indicators u

Indicator

Name

Indicator

Immobilizer System Indicator

On/Blinking
· Blinks if the immobilizer system cannot recognize the key information.

Explanation
· Blinks - You cannot start the power system. Set the power mode to VEHICLE OFF*1, then select the ON mode again.
· Repeatedly blinks - The system may be malfunctioning. Have your vehicle checked by a dealer.
· Do not attempt to alter this system or add other devices to it. Electrical problems can occur.

Message
*2
*2

Indicator

· Blinks when the security system

Security System alarm has been set. Alarm Indicator

2 Security System Alarm P. 190

*1:Canadian models only: Apply and hold the brake pedal before selecting the ON mode. *2:Canadian models

https://manual-hub.com/

Continued 105

uu Indicators u

Indicator

Name

System Message Indicator

On/Blinking

Explanation

· Comes on along with a beep when · While the indicator is on, press the

a problem is detected. A system

(home) button to see the message again.

message on the driver information

2 Accessing contents in the main

interface appears at the same time.

display P. 143

· Refer to the Indicators information in this

chapter when a system message appears

on the driver information interface.

Respond to the message accordingly.

· The driver information interface does not

return to the normal screen unless the

warning is canceled, or the left selector

wheel is pressed.

Message --

Instrument Panel

106

https://manual-hub.com/

Instrument Panel

Indicator

Name

On/Blinking
· Comes on when the ECON mode is on.

Explanation

ECON Mode Indicator

2 ECON Mode P. 433

*1:Models without adaptive damper system *2:Models with adaptive damper system

uu Indicators u
Message
*1
*2

https://manual-hub.com/

Continued 107

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking
· Comes on when you press the SPORT button.

Explanation
· The ambient meter remains lit up in red as long as SPORT mode is on.
2 SPORT Mode P. 429

Message
*1

SPORT Mode

Indicator

*1:Models without adaptive damper system *2:Models with adaptive damper system

108

https://manual-hub.com/

uu Indicators u

Indicator

Name

On/Blinking

Explanation

· Comes on if there is a problem with · Comes on while driving - Have your

ACC with Low Speed Follow.

vehicle checked by a dealer.

Message

Instrument Panel

Adaptive Cruise · Comes on if the ACC with Low · Drive a short distance at more than 12

Control (ACC) Speed Follow is deactivated

mph (20 km/h). The indicator should go

with Low Speed temporarily after the 12-volt battery off. If it does not, have your vehicle

Follow Indicator has been disconnected, then re-

checked by a dealer.

(Amber)

connected.

· Indicator may come on temporarily when the Maximum Load Limit is exceeded.
· ACC with Low Speed Follow has been automatically canceled.

· Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit P. 413
· Stays on constantly - Have your vehicle checked by a dealer.

Adaptive Cruise · Lights up in white when you press Control (ACC) the button. with Low Speed · Lights up in green when you press Follow Indicator the RES/+ button or SET/ button. (White/Green)

2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

Cruise Mode Indicator (White/Green)

· Lights up in white when you change to cruise mode.
· Lights up in green when you have set a speed for cruise control.

2 To Switch ACC with Low Speed Follow to Cruise Control P. 478

https://manual-hub.com/

--
-- --
Continued 109

uu Indicators u

Indicator

Name

On/Blinking

Explanation

· Comes on if there is a problem with · Stays on constantly - Have your vehicle

Lane Keeping

the LKAS.

checked by a dealer.

Assist System

(LKAS) Indicator

(Amber)

Lane Keeping · Lights up in white when you press

Assist System

the LKAS button.

(LKAS) Indicator · Lights up in green when the LKAS is

(White/Green) in operation.

2 Lane Keeping Assist System (LKAS) P. 480

Message --

Instrument Panel

110

https://manual-hub.com/

uu Indicators u

Indicator

Name

On/Blinking

Explanation

· Comes on if there is a problem with RDM, Low Speed Braking Control*, CMBSTM, or blind spot information system*.

· Stays on constantly - Have your vehicle checked by a dealer.

Message

Instrument Panel

Safety Support Indicator (Amber)

· Comes on if the RDM, Low Speed Braking Control*, and CMBSTM are deactivated temporarily after the 12-volt battery has been disconnected and then reconnected.

· Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.

* Not available on all models

https://manual-hub.com/

Continued 111

Instrument Panel

uu Indicators u

Indicator

Name

On/Blinking

Explanation

Safety Support Indicator (Amber)

· Comes on when RDM, Low Speed Braking Control*, and/or CMBSTM shuts itself off.

· Indicator may come on temporarily when passing through an enclosed space, such as tunnel.
· The area around the radar sensor cover is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth. Indicator may take some time to go off after the radar sensor cover is cleaned.
· Have your vehicle checked by a dealer if the indicator does not go off even after you have cleaned the radar sensor cover.
2 Radar Sensor P. 501

· Stays on - The temperature inside the camera is too high. Use the climate control system to cool down the camera. The system activates when the temperature inside the camera cools down.
2 Front Sensor Camera P. 499

Message

112 * Not available on all models

https://manual-hub.com/

uu Indicators u

Instrument Panel

Indicator

Name

On/Blinking

Explanation

· Comes on when RDM, Low Speed Braking Control*, and/or CMBSTM shuts itself off.

· Stays on - The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth.
· Have your vehicle checked by a dealer if the indicator and message are still displayed even after you have cleaned the area around the camera.
2 Front Sensor Camera P. 499

Safety Support Indicator (Amber)

Models with Low Speed Braking Control · Remove the obstacle in the vicinity of the

· Comes on when mud, snow, or ice sonar sensor.

accumulates in the vicinity of sonar.

2 Low Speed Braking Control* P. 459

2 Sonar Sensors* P. 502

Models with blind spot information system
· Comes on when mud, snow, or ice has accumulated in the vicinity of the blind spot information system sensor.

· Comes on while driving - Something may be interfering with the blind spot information system sensor. Check the vicinity of the blind spot information system sensor and remove any obstacles.
2 Blind spot information System* P. 443

· Indicator may come on temporarily · Make sure the total load is within the

when the Maximum Load Limit is

Maximum Load Limit.

exceeded.

2 Maximum Load Limit P. 413

Message --

* Not available on all models

https://manual-hub.com/

Continued 113

uu Indicators u

Indicator

Name

On/Blinking

Safety Support Indicator (Green/Gray)

· Lights up in green when RDM, Low Speed Braking Control*, CMBSTM, and blind spot information system* are on.
· Lights up in green and gray when RDM, Low Speed Braking Control*, CMBSTM, or blind spot information system* or any two of these systems are off.
· Lights up in gray when RDM, Low Speed Braking Control*, CMBSTM, and blind spot information system* are off.

Explanation
2 RDM On and Off P. 491 2 CMBSTM On and Off P. 453 2 Blind spot information system on
and off P. 445 2 System On and Off P. 461

Message

Instrument Panel

114 * Not available on all models

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Driver Information Interface Warning and Information Messages

The following messages appear only on the driver information interface. Press the (home) button, select Warnings, then press the left selector wheel to see the message again with the system message indicator on.

Message

Condition

Explanation

· Appears when the vehicle is no longer able to run · Immediately stop in a safe place. due to a malfunction.

· Appears when there is a risk that the vehicle will · While the vehicle is stopped, apply the parking brake.

move unexpectedly after you have stopped due to a

2 Parking Brake P. 503

malfunction with the vehicle.

· Have your vehicle checked by a dealer.

· Appears when you set the power mode to ON again and the vehicle is able to run.

2 Turning on the Power P. 416

https://manual-hub.com/

Continued 115

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears if any door or the trunk is not completely closed.
· Appears if any door or the trunk is opened while driving. The beeper sounds.

Explanation · Disappears when all doors and the trunk are closed.

Instrument Panel

116

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition · Appears when the engine oil pressure is low.

Explanation
· Appears while driving - Immediately stop in a safe place.
2 If the Low Oil Pressure Warning Appears P. 609

· Appears if there is a problem with the shutter grille, · Power output will be reduced, so you may not be able

and the radiator coolant temperature is too high.

to accelerate or maintain your current speed. Have your

vehicle checked by a dealer.

Canadian models
· Appears when the washer fluid is low.

· Refill the washer fluid.
2 Refilling Window Washer Fluid P. 552

· Appears when the scheduled maintenance is due soon.
· Consequently, Maintenance Due Now and Maintenance Past Due follow.

2 Maintenance Minder Messages on the Driver Information Interface P. 535

https://manual-hub.com/

Continued 117

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears when there is a problem with the 12-volt battery charging system.

Explanation · Have your vehicle checked by a dealer.

· Appears when the engine coolant temperature is · Drive slowly to prevent overheating. near its upper limit.

· Appears when the engine coolant temperature gets abnormally high.

2 Overheating P. 606

118

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears if the automatic brake hold is automatically · Immediately depress the brake pedal. canceled while it is in operation.

· Appears when the automatic brake hold system is turned off.

2 Automatic Brake Hold P. 508

· Appears when the automatic brake hold button is · Fasten the driver's seat belt.

pressed without wearing the driver's seat belt.

2 Automatic Brake Hold P. 508

· Appears when the automatic brake hold button is pressed without depressing the brake pedal while the automatic brake hold is in operation.

· Press the automatic brake hold button with the brake pedal depressed.
2 Automatic Brake Hold P. 508

https://manual-hub.com/

Continued 119

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears when the parking brake is applied automatically while it is in operation.

Explanation
2 Automatic Brake Hold P. 508 2 Parking Brake P. 503

· Appears when the electric parking brake switch is pressed without depressing the brake pedal while the electric parking brake is in operation.

· Press the electric parking brake switch with the brake pedal depressed.
2 Parking Brake P. 503

· Appears when you set the power mode to ACCESSORY or ON.
Canadian models
· Appears after you unlock and open the driver's door.

2 Turning on the Power P. 416

120

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition · Appears when the power mode is in ACCESSORY.

Explanation --

· Appears after the driver's door is opened when the · Change the power mode to VEHICLE OFF.

power mode is in ACCESSORY.

2 POWER Button P. 197

· Appears when you close the door with the power mode in ON without the keyless remote inside the vehicle.

· Disappears when you bring the keyless remote back inside the vehicle and close the door.
2 Keyless Remote Reminder P. 199

· Appears when the keyless remote battery becomes weak.

2 Replacing the Remote Battery P. 575

https://manual-hub.com/

Continued 121

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears if the keyless remote's battery is too weak to turn on the power system or the key is not within operating range to turn on the power system. The beeper sounds six times.

· Bring the back of the keyless remote into contact with the POWER button.
2 If the Keyless Remote Battery is Weak P. 602

· Appears as soon as a problem is detected in the keyless access system (smart entry system) or push button starting system.

· Appears constantly - Have your vehicle checked by a dealer.

· Appears if you press the POWER button while the vehicle is moving.

2 Emergency Power System Off P. 603

122

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears if the vehicle is being driven in a manner consistent with drowsy or inattentive driving.

Explanation

2 Driver Attention Monitor P. 157

· Appears when you set the power mode to VEHICLE · Check the rear seat for passengers or items before

OFF, if the rear doors were opened shortly before or exiting the vehicle.

after the vehicle was powered on.

2 Rear Seat Reminder P. 223

https://manual-hub.com/

Continued 123

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when you set the power mode to OFF while · Immediately stop in a safe place, set the parking brake,

driving.

then restart the power system. If the message

disappears, continue driving.

· Appears if the vehicle is stopped and the driver's seat belt is unfastened, as there is a possibility that the vehicle may roll.

· When the vehicle is idling or when you are parking or exiting the vehicle, put the transmission into (P before releasing the brake pedal.
2 Shift Operation P. 425

· Appears when you put the transmission into (N, then release the (N button.

2 If you want to keep the transmission in (N position [car wash mode] P. 427

124

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when you try to change the transmission · Release your foot off the accelerator pedal, then without releasing your foot off the accelerator pedal. change the transmission.

(White)

· Appears when the (P button is pressed while the vehicle is moving.
· Appears if you put the transmission into (R while the vehicle is moving forward, or into (D while the vehicle is reversing.

· Make sure that the vehicle comes to a stop before operating the shift button.

· Appears when you set the power mode to ON without fastening the driver's seat belt.
· Appears when you change the shift position after (P has been automatically selected with the driver's door open, the driver's seat belt unfastened, then the brake pedal is released.

· Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 425

· Appears when you try to change the transmission · Depress the brake pedal, then change the transmission. without depressing the brake pedal.

https://manual-hub.com/

Continued 125

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears when you depress the accelerator pedal while the shift position is in (N.

Explanation
· Remove your foot off the accelerator pedal. When driving, depress the brake pedal and operate the shift position.

· Appears when you repeatedly change the shift position between (P and other positions in short period.

· Take some time before changing the shift position.

· Appears when you press the (P button but it is not · Depress the brake pedal until this message disappear. engaged due to low ATF temperature.

· Appears when you press and hold (N button for more than two seconds.

· Disappears when you set the shift position to a shift other than (N. 2 If you want to keep the transmission in (N
position [car wash mode] P. 427

126

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears if there is a problem with the automatic lighting control system.

Explanation
· Appears while driving - Manually turn the lights on, and have your vehicle checked by a dealer.

· Appears if there is a problem with the headlights.

· Appears while driving - The headlights may not be on. When conditions allow you to drive safety, have your vehicle checked by a dealer as soon as possible.

Models with parking sensor system
· Appears if there is a problem with the parking sensor system.

· Check if the area around the sensor(s) is covered with mud, ice, snow, etc. If the indicator(s) stays on even after you clean the area, have the system checked by a dealer.

· Appears if there is a problem with the auto highbeam.

· Manually operate the headlight switch. · If you are driving with the high beam headlights when
this happens, the headlights are changed to low beams.

https://manual-hub.com/

Continued 127

uuIndicatorsuDriver Information Interface Warning and Information Messages

Instrument Panel

Message

Condition

Explanation

· Appears if anything covers the radar sensor cover and prevents the sensor from detecting a vehicle in front.
· May appear when driving in bad weather (rain, snow, fog, etc.)

· When the radar sensor gets dirty, stop your vehicle in a safe place, and wipe off dirt using a soft cloth. The message may take some time to go off.
· Have your vehicle checked by a dealer if the message does not disappear even after you clean the sensor cover.
2 Radar Sensor P. 501 2 Honda Sensing® P. 447

· Appears if the temperature inside the front sensor camera is too high and some driver assist systems cannot be activated.

· Use the climate control system to cool down the camera. · Disappears - The camera has been cooled down and
the systems are activated normally.
2 Front Sensor Camera P. 499 2 Honda Sensing® P. 447 2 Auto High-Beam P. 205

· Appears if the area around the front sensor camera is blocked by dirt, mud, etc. and be prevented from detecting a vehicle in front.
· May appear when driving in bad weather (rain, snow, fog, etc.)

· When the front window gets dirty, stop your vehicle in a safe place, and wipe it off with a soft cloth.
· Have your vehicle checked by a dealer if the message does not disappear even after you cleaned the area around the camera.
2 Front Sensor Camera P. 499 2 Honda Sensing® P. 447 2 Auto High-Beam P. 205

· Appears when ACC with Low Speed Follow has been automatically canceled.

· You can resume the set speed after the condition that caused ACC with Low Speed Follow to cancel improves. Press the RES/+ button.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

128

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Flashes when the system senses a likely collision. The beeper sounds.

· Take appropriate action to prevent a collision (apply the brakes, change lanes, etc.)
2 Collision Mitigation Braking SystemTM (CMBSTM) P. 450
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464
2 Low Speed Braking Control* P. 459

· Appears when ACC with Low Speed Follow is canceled due to excessive high vehicle speed.

· Reduce the speed, then reset ACC with Low Speed Follow.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears when cruise control is canceled due to excessive low vehicle speed.

· Raise the speed, then reset cruise control.
2 To Switch ACC with Low Speed Follow to Cruise Control P. 478

· Appears when the speed of the vehicle is too high for you to set ACC with Low Speed Follow.

· Reduce the speed, then set ACC with Low Speed Follow.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

* Not available on all models

https://manual-hub.com/

Continued 129

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when the speed of the vehicle is too low for · Raise the speed, then set cruise control.

you to set cruise control.

2 To Switch ACC with Low Speed Follow to Cruise

Control P. 478

· Appears when the vehicle ahead of you resumes driving, after your vehicle has been stopped automatically by ACC with Low Speed Follow.

· Press the RES/+ or SET/ button or depress the accelerator pedal to resume.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears when the distance between your vehicle and the vehicle ahead of you is too close while ACC with Low Speed Follow is in operation.

· ACC with Low Speed Follow has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears when pressing the SET/ button while the · ACC with Low Speed Follow cannot be set.

distance between your vehicle and the vehicle ahead

2 Adaptive Cruise Control (ACC) with Low Speed

of you is too close.

Follow P. 464

130

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears if the VSA® or traction control function operates while ACC with Low Speed Follow is in operation.

Explanation
· ACC with Low Speed Follow has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears just before the ACC with Low Speed Follow is automatically canceled when you are descending a long hill etc. (The following interval is automatically set to extra long).
· Appears when the ACC with Low Speed Follow has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears when you are descending a long hill etc. and you press the RES/+ or SET/ button.

2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

https://manual-hub.com/

Continued 131

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when the driver's seat belt is unfastened while your vehicle is automatically stopped by ACC with Low Speed Follow.

· ACC with Low Speed Follow has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears when pressing the SET/ button while the · ACC with Low Speed Follow cannot be set.

driver's seat belt is unfastened.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow P. 464

· Appears when the shift position is changed to any position other than (D while ACC with Low Speed Follow is in operation.

· ACC with Low Speed Follow has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears when pressing the SET/ button while the · ACC with Low Speed Follow cannot be set.

shift position is in any position other than (D.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow P. 464

132

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when the vehicle is stopped on a very steep slope while ACC with Low Speed Follow is in operation.

· ACC with Low Speed Follow has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

Appears when pressing the SET/ button while the ACC with Low Speed Follow cannot be set.

vehicle is stopped on a very steep slope.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow P. 464

https://manual-hub.com/

Continued 133

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when the parking brake is applied automatically while ACC with Low Speed Follow is in operation.

· ACC with Low Speed Follow has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464
2 Parking Brake P. 503

· Appears when pressing the SET/ button while the parking brake is applied.

· ACC with Low Speed Follow cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464
2 Parking Brake P. 503

· Appears when pressing the SET/ button while the · ACC with Low Speed Follow cannot be set.

vehicle is moving and the brake pedal is depressed.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow P. 464

· Appears if ACC with Low Speed Follow is canceled · Immediately depress the brake pedal. while your vehicle is automatically stopped by ACC with Low Speed Follow.

134

https://manual-hub.com/

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when SET/, RES/+, CANCEL, or interval button is pressed while ACC with Low Speed Follow is off.

· After pressing the button, press the SET/, RES/+, CANCEL, or interval button.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

· Appears when interval button is pressed while Cruise mode is selected.

· After selecting ACC with Low Speed Follow, press the interval button.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464

Instrument Panel

https://manual-hub.com/

Continued 135

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

Lane Keeping Assist System (LKAS)

· Keep the vehicle within the lane you are driving.

· Appears when the vehicle is driving out of a detected

2 Lane Keeping Assist System (LKAS) P. 480

lane. The steering wheel vibrates rapidly.

Road Departure Mitigation (RDM) System

· Keep the vehicle within the lane you are driving.

· Appears when the vehicle is driving out of a detected lane.

2 Road Departure Mitigation (RDM) System P. 488

When you selected Warning Only
- The steering wheel vibrates rapidly when the vehicle is drifting out of a detected lane.
When you selected Narrow, Normal or Wide

· You can change the setting for the road departure mitigation system. Narrow, Normal, Wide, and Warning Only can be selected.
2 Customized Features P. 357

- The steering wheel vibrates rapidly when the

vehicle is drifting out of a detected lane. The system

also steers the vehicle to help you remain within

your driving lane.

Road Departure Mitigation (RDM) System

When you selected Narrow

· Appears when the vehicle is likely to drive out of a detected lane.

The RDM system also steers the vehicle to help you

remain within your driving lane.

· Blinks when you fail to steer the vehicle. The beeper · Operate the steering wheel to resume the LKAS. sounds simultaneously.

136

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when the LKAS is in operation, or the LKAS button is pressed, but there is a problem with a system related to the LKAS. The LKAS cancels automatically. The beeper sounds simultaneously.

· If any other system indicators come on, such as the VSA®, ABS and brake system, take appropriate action.
2 Indicators P. 88

Models with Low Speed Braking Control

· Appears when the Low Speed Braking Control is

activated.

Models with adaptive damper system
· Appears if there is a problem with the adaptive damper system.

· Have your vehicle checked by a dealer. Your vehicle will have normal damping ability without the adaptive damper feature.

· Appears if the ECON mode or SPORT mode cannot be changed due to certain situations, such as a system error or adverse driving conditions.

2 ECON Mode P. 433 2 SPORT Mode P. 429

https://manual-hub.com/

Continued 137

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears when you unlock and open the driver's door while the power system is on by keyless remote.

Explanation
2 Remote Engine Start P. 418

· Appears if there is a problem with the acoustic vehicle alerting system.

· Have your vehicle checked by a dealer immediately.

· Appears when the High Voltage battery is running · Contact a dealer immediately. extremely low.

· Appears if the engine needs to be started when you press the EV button.
--

138

https://manual-hub.com/

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition
· Appears when EV mode has been automatically canceled.

Explanation
2 EV Button P. 15

· Appears when the power system temperature is high.

· Your vehicle has less ability to accelerate and may be harder to start on an incline.
· Park in a safe place, and cool the system down.
2 Overheating P. 606

· Appears when the High Voltage battery temperature · Your vehicle has less ability to accelerate and may be

is low.

harder to start on an incline.

· Disappears once you start driving as the High Voltage

battery warms up.

· Appears when the High Voltage battery temperature · You can start the engine and use the climate control

is too low to operate (approx. -22°F [-30°C] or

system to warm up the interior, which will also warm

below).

the High Voltage battery enough for you to drive the

vehicle.

https://manual-hub.com/

Continued 139

Instrument Panel

uuIndicatorsuDriver Information Interface Warning and Information Messages

Message

Condition

Explanation

· Appears when the High Voltage battery and other · You must wait for an increase in the ambient

system control temperatures are too low to operate temperature or move the vehicle to a warmer location.

(approx. -40°F [-40°C] or below).

· Consult a dealer if necessary.

· Appears if the power system is in diagnostic mode. · You may notice a decrease in available power. Have your vehicle checked by a dealer.

· Appears when you have met following situations and EV mode is canceled. - Battery Temperature At Limit. - Battery Charge Too Low. - Engine Too Cold. - Cabin Being Heated. - Speed Too High. - Hard Acceleration Requested.

· EV mode is available once the condition is improved or the cause that canceled EV mode is cleared.

140

https://manual-hub.com/

Gauges and Displays

Gauges
Gauges include the speedometer, fuel gauge, and other related indicators. They are displayed when the power mode is in ON.
Speedometer
Displays your driving speed in mph (U.S.) or km/h (Canada).

1Speedometer
You can show another speed unit on the driver information interface and set the displayed measurements to read in either mph or km/h.
2 POWER/CHARGE Gauge P. 154

Fuel Gauge
Displays the amount of fuel left in the fuel tank.

1Fuel Gauge
NOTICE You should refuel when the reading approaches E . Running out of fuel can cause the engine to misfire, damaging the catalytic converter.

The actual amount of remaining fuel may differ from the fuel gauge reading.

Instrument Panel

Continued
https://manual-hub.com/

141

uuGauges and DisplaysuGauges
High Voltage Battery Charge Level Gauge
Shows the remaining High Voltage battery charge level.

1High Voltage Battery Charge Level Gauge
The High Voltage battery charge level may decrease under the following conditions:
· When the 12-volt battery has been replaced. · When the 12-volt battery has been disconnected. · When the High Voltage battery control system
corrects its reading.
The charge level reading will be corrected automatically while driving.
Changes in the temperature of the High Voltage battery can increase or decrease the battery's charging capacity. If temperature changes cause the battery's capacity to change, the number of indicators in the battery charge level gauge may also change, even if the amount of charging remains the same.

Instrument Panel

142

https://manual-hub.com/

uuGauges and DisplaysuDriver Information Interface

Driver Information Interface
The driver information interface shows information such as the estimated travelable distance and fuel economy of the vehicle. It also displays messages such as warnings and other helpful information.

Switching the Display
Accessing contents in the main display Press the (home) button, then roll the left selector wheel to scroll to the content you want to see. Press the left selector wheel to see detailed information.

1Switching the Display To go back to the previous screen, press the (back) button.
You can edit, add, or delete the meter contents using the audio/information screen.
2 Customizing the Meter P. 272

Instrument Panel

Continued
https://manual-hub.com/

143

uuGauges and DisplaysuDriver Information Interface

Instrument Panel

Left Selector Wheel (Home) Button
Roll the left selector wheel.
144

Power/Charge P. 154
Eco Drive P. 163
Power Flow P. 165
Range & Fuel P. 147
Fuel Economy P. 162
Speed & Time P. 149
Audio P. 155
Phone P. 153
https://manual-hub.com/

Warnings P. 152
Safety Support P. 161
Maintenance P. 152
Rear Seat Belts P. 156
Driver Attention P. 157
Driving Support P. 160
Traffic Sign P. 155
Navigation P. 151

Sub display Press the TRIP button to change the display.

uuGauges and DisplaysuDriver Information Interface

TRIP

Instrument Panel

TRIP Button

Odometer Outside Temperature

Trip A

Odometer
Shows the total number of miles or kilometers that your vehicle has accumulated.

https://manual-hub.com/

Trip B
Continued 145

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

Trip Meter
Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.

1Trip Meter
Switch between trip meter A and trip meter B by pressing the TRIP Button.

Resetting a trip meter To reset a trip meter, display it, then press and hold the TRIP Button. The trip meter is reset to 0.0.

Outside Temperature
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
Adjusting the outside temperature display Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading seems incorrect.

1Outside Temperature The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be updated after the temperature reading has stabilized.

You can adjust the temperature reading. 2 Customized Features P. 357

146

https://manual-hub.com/

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

Range & Fuel
Roll the left selector wheel to switch between trip computer A and trip computer B.

Trip Computer A

Range
Average Fuel Economy
Instant Fuel Economy
Trip Meter

Roll

Trip Computer B

Left Selector Wheel

https://manual-hub.com/

Continued 147

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

Trip meter Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.

1Trip meter
Switch between trip meter A and trip meter B by rolling the left selector wheel.

Resetting a trip meter To reset the trip meter, display it, then press the left selector wheel and then select Reset.
u The trip meter is reset to 0.0.

When resetting the trip meter in the Range & Fuel, the trip meter in the sub display resets at the same time.

Average fuel economy (Avg. Fuel) Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.

1Average fuel economy (Avg. Fuel)
You can change when to reset the average fuel economy.
2 Customized Features P. 357

Instant fuel economy Shows the instant fuel economy as a bar graph in mpg or l/100 km.

Range Shows the estimated distance you can travel on the remaining power and fuel. This estimated distance is based on the vehicle's current fuel economy.

148

https://manual-hub.com/

Instrument Panel

uuGauges and DisplaysuDriver Information Interface
Speed & Time
Roll the left selector wheel to switch between trip computer A and trip computer B.

Trip Computer A

Average Speed Elapsed Time Trip Meter

Roll Trip Computer B Left Selector Wheel

https://manual-hub.com/

Continued 149

uuGauges and DisplaysuDriver Information Interface
Trip meter
2 Trip meter P. 148
Elapsed time Shows the time elapsed since Trip A or Trip B was reset. Average speed (Avg. Speed) Shows the average speed in mph or km/h since Trip A or Trip B was reset.

1Elapsed time You can change when to reset the elapsed time. 2 Customized Features P. 357
1Average speed (Avg. Speed) You can change when to reset the average speed. 2 Customized Features P. 357

Instrument Panel

150

https://manual-hub.com/

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

Navigation
Compass Turn-By-Turn Driving Directions

Compass Shows the compass screen.
Turn-by-Turn Directions When driving guidance is provided by the navigation system*, Android Auto or Apple CarPlay, turn-by-turn directions to your destination appear.
2 Refer to the Navigation System Manual 2 Android Auto P. 326 2 Apple CarPlay P. 320

1Navigation You can select whether to have the turn-by-turn display come on or not during the route guidance. 2 Customized Features P. 357
Turn-by-turn directions may not be available for all apps.
Models with navigation system
When the compass or turn-by-turn directions are displayed, you can control some navigation system functions on the driver information interface by scrolling the left selector wheel.
2 Refer to the navigation system

* Not available on all models

Continued
https://manual-hub.com/

151

uuGauges and DisplaysuDriver Information Interface

Warnings

2 Driver Information Interface Warning and Information Messages P. 115

1Warnings If there are no Warnings, None message appears on the driver information interface.
If there are multiple warnings, you can roll the left selector wheel to see other warnings.

(Example)
Maintenance

Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 533

Instrument Panel

152

https://manual-hub.com/

Phone

uuGauges and DisplaysuDriver Information Interface
Shows the current phone information.
2 Bluetooth® HandsFreeLink® P. 381

Instrument Panel

Continued
https://manual-hub.com/

153

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

POWER/CHARGE Gauge

Electric motor The degree to which the electric motor is being powered is displayed by the readings on the POWER side.

Battery charge in progress The degree to which the High Voltage battery is being charged is displayed by the readings on the CHARGE side.
Speed/Distance Units Enables you to show another unit on the driver information interface, head-up display* and audio/information screen and set the displayed measurements to read in either miles and mph or km and km/h.

Press and hold the left selector wheel when you select Power/Charge on the driver information interface. Each time you do this, the unit will change from miles, mph to km, km/h or vice versa. After this, a confirmation screen will appear for a few seconds.

154 * Not available on all models

https://manual-hub.com/

Instrument Panel

Audio

uuGauges and DisplaysuDriver Information Interface
Shows the current audio information.
2 Audio System Basic Operation P. 257

Traffic Sign Recognition System
Shows the traffic sign recognition system.
2 Traffic Sign Recognition System P. 493

Continued
https://manual-hub.com/

155

uuGauges and DisplaysuDriver Information Interface
Rear Seat Belt Reminder
Appears when any of the rear seat belts are latched or unlatched.
2 Seat Belt Reminder P. 46

Instrument Panel

156

https://manual-hub.com/

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

Driver Attention Monitor

The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is being driven in a manner consistent with drowsy or inattentive driving. If it determines that the vehicle is being driven in such a manner, it will display the degree of the driver's attention on the driver information interface.

(Home) Button

Driver Information Interface

1Driver Attention Monitor
The Driver Attention Monitor cannot always detect if the driver is tired or inattentive. Regardless of the system's feedback, if you are feeling tired, stop in a safe location and rest for as long as needed.

Left Selector Wheel
When you select Driver Attention on the driver information interface, bars on it light up in white to indicate the degree of the driver's attention.
2 Accessing contents in the main display P. 143
Level

Continued
https://manual-hub.com/

157

uuGauges and DisplaysuDriver Information Interface
If two bars light up, the Driver Attention Level Low message will appear.

Instrument Panel

If one bar lights up, the Driver Attention Level Low. Time For A Break message will appear, a beep will sound, and the steering wheel will vibrate. If this message appears, stop in a safe location and rest for as long as needed. The message will disappear when the left selector wheel is pressed or when the system has determined that the driver is driving normally. If the driver does not take a break and the monitor continues to detect that the driver is very tired, the message will appear again after approximately 15 minutes, accompanied by a beep and steering wheel vibrations. The message does not appear when the traveling time is 30 minutes or less.

158

https://manual-hub.com/

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

The Driver Attention Monitor resets when: · The power system is turned off. · The driver unfastens the seat belt and opens the door while the vehicle is stopped.
For the Driver Attention Monitor to function: · The vehicle must be traveling above 25 mph (40 km/h). · The electric power steering (EPS) system indicator must be off.

1For the Driver Attention Monitor to function:
The bars on the driver information interface remain grayed out unless the Driver Attention Monitor is functioning.

Depending on driving conditions or other factors, the Driver Attention Monitor may not function in the following circumstances:
· The steering assist function of the Lane Keeping Assist System (LKAS) is active.
2 Lane Keeping Assist System (LKAS) P. 480
· The condition of the road is poor, e.g. the surface is unpaved or bumpy. · It is windy. · The driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.

Customizing You can change the Driver Attention Monitor settings. Select Tactile And Audible Alert, Tactile Alert, or OFF.
2 Customized Features P. 357

Continued
https://manual-hub.com/

159

uuGauges and DisplaysuDriver Information Interface

Driving Support Information

Icon of vehicle ahead Distance to vehicle ahead
When ACC with Low Speed Follow and LKAS are On
Set Vehicle Interval

Shows the distance between your vehicle and the vehicle detected ahead. Informs you whether ACC with Low Speed Follow and/or LKAS is activated or not. If ACC with Low Speed Follow is activated, the set following interval is displayed. If LKAS is activated, the displayed lane marks change to indicate that LKAS is activated.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464
2 Lane Keeping Assist System (LKAS) P. 480

1Driving Support Information In case ACC with Low Speed Follow is not activated, when the distance between your vehicle and the vehicle ahead becomes too small, the section behind the vehicle icon turns amber and alerts you.
Amber gradation

Instrument Panel

ACC with Low Speed Follow on: The section behind the vehicle icon turns green. LKAS on: The lane outlines appear on the display. LKAS starts: The lane lines change to solid ones. LKAS suspend: The lane lines change to dotted ones.
160

https://manual-hub.com/

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

Safety Support
Indicates the status of RDM, Low Speed Braking Control*, CMBSTM, and blind spot information system*, such as On, Off, or Failure, by color and letters.

The following colors indicate the status of any of the above mentioned systems: · Green: The system is on. · Gray: The system is off. · Amber: There is a problem with the system.

Area Info for the Low Speed Braking Control*

Area Info for CMBSTM

CMBSTM Icon and Status Info
Low Speed Braking Control Icon and Status Info*
Area Info for blind spot information system*

RDM Icon and Status Info Area Info for RDM
Blind spot information system Icon and Status Info*

1Safety Support
If a system is indicated by the color amber, have your vehicle checked by a dealer immediately.
To turn on or off each system, first rotate the left selector wheel to switch displays. From the next display you can select which system to turn on or off.
2 RDM On and Off P. 491 2 CMBSTM On and Off P. 453 2 Blind spot information system on and off
P. 445 2 System On and Off P. 461
You can also confirm the status of each function by the color of the safety support indicator.
2 Safety Support Indicator (Amber) P. 111 2 Safety Support Indicator (Green/Gray)
P. 114
Models with Low Speed Braking Control
Even when the Low Speed Braking Control icon is green, if the parking sensor is turned off for the rear only, the brake assist will not operate when reversing.
2 Turning off All Rear Sensors P. 518

* Not available on all models

Continued
https://manual-hub.com/

161

uuGauges and DisplaysuDriver Information Interface
Average Fuel Economy Records
Shows the average fuel economy for the last three driving cycles (1-3), and the current driving cycle (0) in mpg or l/100 km.
Each time you set the power mode to ON, the display is updated, and the oldest record is deleted.

Instrument Panel

162

https://manual-hub.com/

uuGauges and DisplaysuDriver Information Interface

Eco Drive Display/Drive Cycle Score/Lifetime Points
Eco Drive Display The vehicle icon on the display moves forward or backward while driving. The more aggressive the acceleration is, the further the icon moves forward. The more aggressive the deceleration is, the further the icon moves backward. Keep the icon near the center of the circle for better fuel economy while driving.

Aggressive

Moderate

Deceleration Deceleration

Slow Acceleration/ Deceleration

Moderate Acceleration

Aggressive Acceleration

1Eco Drive Display
Switch between the average fuel economy A and average fuel economy B by rolling the left selector wheel.

Vehicle Icon

Average Fuel Economy

Instrument Panel

Continued
https://manual-hub.com/

163

Instrument Panel

uuGauges and DisplaysuDriver Information Interface

Drive Cycle Score/Lifetime Points Appear for a few seconds when you set the power mode to VEHICLE OFF. Each has three stages. Depending on your driving style, the leaf icon(s) and the gauge increase or decrease to indicate that you have reached a different stage of fuel economy.

Drive Cycle Score

Advancing to 2nd Stage

Advancing to 3rd Stage

Lifetime Points

Receding to 1st Stage

Receding to 2nd Stage

Resetting the Drive Cycle Score 1. Make sure the shift position is in (P. Turn the power mode to ON. 2. If ECON mode is on, press the ECON button to turn it off. 3. Turn the power mode to VEHICLE OFF. 4. Turn the power mode to ON again.
u Make sure to complete steps from 4 through 6 within 30 seconds. 5. Depress the brake pedal twice. 6. Press the ECON button twice.
u The color of the ambient meter will turn to monochrome. 7. Turn the power mode to VEHICLE OFF.

164

https://manual-hub.com/

uuGauges and DisplaysuDriver Information Interface

Power Flow Monitor
Displays the power flow of the motor and engine, indicating the vehicle's power source and whether the battery is being charged.

Power Flow Engine

Engine ON Engine OFF

1Power Flow Monitor
While the vehicle is stationary with the engine running, the following may appear on the driver information interface.

Instrument Panel

Hybrid (HV)
Power is supplied by the motor and the engine.

Electric Vehicle (EV)
Power is supplied by the motor.

Engine (Direct Drive)
The engine is running and the motor is charging the High Voltage battery.

Regeneration
The motor is charging the High Voltage battery.

Power is being supplied by the engine only.

The engine is running and the motor is charging the High Voltage battery.
https://manual-hub.com/

165

Instrument Panel

uuGauges and DisplaysuHead-Up Display*

Head-Up Display*
Shows the current mode for ACC with Low Speed Follow and the LKAS, POWER/ CHARGE gauge, traffic sign recognition system, shift position and deceleration paddle selector indicator, compass or turn-by-turn directions along with the vehicle speed. You can choose which item to be displayed using the (HUD) button on the steering wheel. They are displayed when the power mode is in ON.

1Head-Up Display*
When you unlock and open the driver's door with a remote transmitter or keyless access system, the head-up display adjusts automatically to one of the two preset positions.

To turn the head-up display on and off : Press the HUD button on the driver side control panel. The display can be moved up and down to become level with your eyes. To raise or lower the head-up display : Press the 3 or 4 button until the desired position is reached.

Head-Up Display 3 / 4 Button

Press the 3 button to raise the display.

HUD Button

Press the 4 button to lower the display.

166 * Not available on all models

https://manual-hub.com/

Lane Departure Warning

The display also shows the following warnings. · Lane Departure Warning: When your
vehicle is too close to the traffic lane lines, the lane departure warning appears.
2 Lane Keeping Assist System (LKAS) P. 480
· Head-up Warning Lights: Flash when the BRAKE message appears on the driver information interface.
2 Collision Mitigation Braking SystemTM (CMBSTM) P. 450
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464
2 Low Speed Braking Control* P. 459

uuGauges and DisplaysuHead-Up Display*

Instrument Panel

* Not available on all models

Continued
https://manual-hub.com/

167

Instrument Panel

uuGauges and DisplaysuHead-Up Display*
To Change Head-Up Display Content
Each time you press the (HUD) button on the steering wheel, the head-up display content will change.
Head-Up Display

Current Mode for ACC with Low Speed Follow and the LKAS, Vehicle Speed, Traffic Sign Recognition System

Vehicle Speed, Traffic Sign Recognition System

POWER/CHARGE Gauge, Shift Position Indicator, Deceleration Paddle Selector Indicator, Vehicle Speed, Traffic Sign Recognition System

(HUD) Button

Turn-by-Turn Directions, Vehicle Speed, Traffic Sign Recognition System

Compass, Vehicle Speed, Traffic Sign Recognition System

Traffic Sign Recognition System, Vehicle Speed

168

https://manual-hub.com/

Instrument Panel

uuGauges and DisplaysuHead-Up Display*

Vehicle Speed
Shows your driving speed in mph or km/h.
POWER/CHARGE Gauge
Shows the degree for POWER/CHARGE as a bar graph.

1Vehicle Speed
Switch between mph and km/h by using the driver information interface or customized features on the audio/information screen.
2 Speed/Distance Units P. 154 2 Customized Features P. 357

Shift Position Indicator
Shows the current shift position.
2 Shift Position Indicator P. 97

Deceleration Paddle Selector Indicator
Shows the current deceleration stage for the deceleration paddle selector.
2 Deceleration Paddle Selector Indicator P. 97 2 Shifting P. 423

Current Mode for ACC with Low Speed Follow and the LKAS
Shows the current mode for ACC with Low Speed Follow and the LKAS.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 464 2 Lane Keeping Assist System (LKAS) P. 480

Continued
https://manual-hub.com/

169

uuGauges and DisplaysuHead-Up Display*

Navigation
Compass Shows the compass screen.
Turn-by-Turn Directions When driving guidance is provided by the navigation system, Android Auto or Apple CarPlay, turn-by-turn directions to your destination appear.
2 Refer to the Navigation System Manual 2 Android Auto P. 326 2 Apple CarPlay P. 320

1Navigation You can select whether to have the turn-by-turn display come on or not during the route guidance. 2 Customized Features P. 357
Turn-by-turn directions may not be available for all apps.

Traffic Sign Recognition System
Shows the traffic sign recognition system.
2 Traffic Sign Recognition System P. 493

Instrument Panel

170

https://manual-hub.com/

Controls
This chapter explains how to operate the various controls necessary for driving.

Clock .................................................. 172 Locking and Unlocking the Doors
Key .................................................. 174 Low Keyless Remote Signal Strength.... 175 Locking/Unlocking the Doors from the Outside .......................................... 176 Locking/Unlocking the Doors from the Inside ............................................. 183 Childproof Door Locks ..................... 185 Auto Door Locking/Unlocking .......... 186 Opening and Closing the Trunk....... 187 Security System Immobilizer System .......................... 190
* Not available on all models

Security System Alarm...................... 190 Windows ........................................... 193 Moonroof* ........................................ 196 Operating the Switches Around the Steering Wheel
POWER Button................................. 197 Turn Signals ..................................... 200 Light Switches.................................. 201 Fog Lights* ...................................... 203 Daytime Running Lights ................... 204 Auto High-Beam .............................. 205 Wipers and Washers ........................ 208
https://manual-hub.com/

Rear Defogger/Heated Door Mirror Button ..210 Heated Windshield Button* ............. 210 Brightness Control ........................... 211 Driving Position Memory System* .... 213 Adjusting the Steering Wheel .......... 215 Mirrors Interior Rearview Mirror ................... 216 Power Door Mirrors ......................... 217 Seats .................................................. 218 Interior Convenience Items.............. 228 Climate Control System Using Automatic Climate Control .... 244 Automatic Climate Control Sensors......248

171

Clock

Adjusting the Clock
You can adjust the time manually in the audio/information screen, with the power mode in ON.

1Clock
Models with navigation system
The clock is automatically updated through the navigation system, so the time does not need to be adjusted.

Controls

172

https://manual-hub.com/

uuClockuAdjusting the Clock

Adjusting the Time

1. Press the (Home) button, then select Settings.
2. Select System. 3. Select Day & Time. 4. Select Set Date & Time. 5. Select Automatic Date & Time, then
select OFF.
To adjust time: 6. Select Set Time. 7. Selecting 3 / 4 . 8. Select Save to set the time.
To adjust date: 6. Select Set Date. 7. Selecting 3 / 4 . 8. Select Save to set the date.

1Clock
You can also adjust the clock by touching the clock displayed on the upper right corner of the display or the Clock icon on the home screen. 1. Touch the clock on the display.
The clock screen of the select face-type appears. 2. Select Settings. 3. Select Day & Time. 4. Select Set Date & Time. 5. Select Automatic Date & Time, then select OFF. 6. Select Set Date or Set Time. 7. Adjusting the dates, hours and minutes by
selecting 3 / 4 . 8. Select Save to set the time.
You can customize the clock display to show the 12 hour clock or 24 hour clock.
2 Customized Features P. 357
You can customize the date display to MM/DD/ YYYY, DD/MM/YYYY or YYYY/MM/DD.
2 Customized Features P. 357

Controls

https://manual-hub.com/

173

Locking and Unlocking the Doors

Key
This vehicle comes with the following key: Use the key to turn the power system on and off, lock and unlock all the doors and the fuel fill door, and open the trunk.

1Key
All the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
2 Immobilizer System P. 190

Built-in Key
Release Knob
Built-in Key

The built-in key can be used to lock/unlock the doors when the keyless remote battery becomes weak and the power door lock/ unlock operation is disabled.
To remove the built-in key, slide the release knob and then pull out the key. To reinstall the built-in key, push the built-in key into the keyless remote until it clicks.

Follow the advice below to prevent damage to the keys:
· Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity.
· Do not drop the keys or set heavy objects on them. · Keep the keys away from liquids, dust and sand. · Do not take the keys apart except for replacing the
battery. If the circuits in the keys are damaged, the power system may not activate, and the remote transmitter may not work. If the keys do not work properly, have them inspected by a dealer.
You can remotely turn the power system on using the remote engine start.
2 Remote Engine Start P. 418

Controls

174

https://manual-hub.com/

Controls

Key Number Tag

uuLocking and Unlocking the DoorsuLow Keyless Remote Signal Strength

Contains a number that you will need if you purchase a replacement key.

1Key Number Tag Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer.
If you lose your key and you cannot activate the power system, contact a dealer.

Low Keyless Remote Signal Strength
The vehicle transmits radio waves to locate the keyless remote when locking/ unlocking the doors and fuel fill door, opening the trunk, or to activate the power system.
In the following cases, locking/unlocking the doors and fuel fill door, opening the trunk, or activating the power system may be inhibited or operation may be unstable: · Strong radio waves are being transmitted by nearby equipment. · You are carrying the keyless remote together with telecommunications
equipment, laptop computers, cell phones, or wireless devices. · A metallic object is touching or covering the keyless remote.

1Low Keyless Remote Signal Strength
Communication between the keyless remote and the vehicle consumes the keyless remote's battery. Battery life is about two years, but this varies depending on regularity of use. The battery is consumed whenever the keyless remote is receiving strong radio waves. Avoid placing it near electrical appliances such as televisions and personal computers.

https://manual-hub.com/

175

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

Locking/Unlocking the Doors from the Outside
Using the Keyless Access System
When you carry the keyless remote, you can lock/unlock the doors and fuel fill door, and open the trunk. You can lock/unlock the doors and fuel fill door within a radius of about 32 inches (80 cm) of the outside door handle.

1Locking/Unlocking the Doors from the Outside
If the interior light switch is in the door activated position, the interior lights come on when you unlock the doors. No doors opened: The light fades out after 30 seconds. Doors relocked: The light goes off immediately.
2 Interior Lights P. 228

Controls

176

https://manual-hub.com/

Controls

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

Locking the doors and the trunk

Door Lock Sensor

Touch the door lock sensor on the front door. u Some exterior lights flash; the beeper

sounds; all the doors and fuel fill door,

and trunk lock; and the security system

sets.

1Using the Keyless Access System If you do not open a door within 30 seconds of unlocking the vehicle with the keyless access system, the doors and trunk will automatically relock.
You can lock or unlock doors using the keyless access system only when the power mode is in VEHICLE OFF.

The keyless access system will not lock the vehicle when a door is open.

· Do not leave the keyless remote in the vehicle
when you get out. Carry it with you.
· Even if you are not carrying the keyless remote, you
can lock/unlock the doors while someone else with the keyless remote is within range.
· The door may be unlocked if the door handle is
covered with water in heavy rain or in a car wash if the keyless remote is within range.
· If you grip a front door handle or touch a door lock
sensor wearing gloves, the door sensor may be slow to respond or may not respond by locking or unlocking the doors.
· After locking the door, you have up to two seconds
during which you can pull the door handle to confirm whether the door is locked. If you need to unlock the door immediately after locking it, wait at least two seconds before gripping the handle, otherwise the door will not unlock.

Continued
https://manual-hub.com/

177

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

Unlocking the doors and the trunk Grab the driver's door handle: u The driver's door and fuel fill door unlocks. u Some exterior lights flash twice and the beeper sounds twice. Grab the front passenger's door handle: u All the doors unlock. u Some exterior lights flash twice and the beeper sounds twice.
Press the trunk release button: u The trunk unlocks and opens. u Some exterior lights flash twice and the beeper sounds.
2 Using the Trunk Release Button P. 188

1Using the Keyless Access System
· The door might not open if you pull it immediately
after gripping the door handle. Grip the handle again and confirm that the door is unlocked before pulling the handle.
· Even within the 32 inches (80 cm) radius, you may
not be able to lock/unlock the doors with the keyless remote if it is above or below the outside handle.
· The keyless remote may not operate if it is too close
to the door and door glass.
The light flash, beep and door unlock mode settings can be customized using the audio/information screen.
2 Customized Features P. 357

Trunk Release Button

Controls

178

https://manual-hub.com/

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

Controls

The activation range of the auto lock function is about 5 feet (1.5 m)

Locking the doors and trunk (Walk away auto lock®)
When you walk away from the vehicle with all doors closed while carrying the keyless remote, the doors will automatically lock. The auto lock function activates when all doors are closed, and the keyless remote is within about 5 feet (1.5 m) radius of the outside door handle. Exit vehicle while carrying keyless remote and close door(s). 1. While within about 5 feet (1.5 m) radius of
the vehicle. u The beeper sounds; the auto lock
function will be activated. 2. Carry the keyless remote beyond about 5
feet (1.5 m) from the vehicle and remain outside this range for 2 or more seconds. u Some exterior lights flash; the beeper
sounds; all doors will then lock.

1Locking the doors and trunk (Walk away auto lock®) The auto lock function is set to OFF as the factory default setting. The auto lock function can be set to ON using the audio/information screen. If you set the auto lock function to ON using the audio/information screen, only the keyless remote that was used to unlock the driver's door prior to the setting change can activate auto lock. 2 Customized Features P. 357
After the auto lock function has been activated, when you stay within the locking/unlocking operation range, the indicator on the keyless remote will continue to flash until the doors are locked.
When you stay beside the vehicle within the operation range, the doors will automatically lock approximately 30 seconds after the auto lock function activating beeper sounds.
When you open a door after the auto lock function activating beeper sounds, the auto lock function will be canceled.

Under the following circumstances, the auto-lock function will not activate:
· The keyless remote is inside the vehicle. uThe beeper will not sound. · The keyless remote is taken out of its operational
range before all the doors are closed.
uThe beeper will sound.

Continued
https://manual-hub.com/

179

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

To temporarily deactivate the function: 1. Set the power mode to OFF. 2. Open the driver's door. 3. Using the master door lock switch, operate
the lock as follows: Lock Unlock Lock Unlock. u The beeper sounds and the function is
deactivated.
To restore the function: · Set the power mode to ON. · Lock the vehicle without using the auto lock
function. · With the keyless remote on you, move out
of the auto lock function operation range. · Open any door.

1Locking the doors and trunk (Walk away auto lock®)
The auto lock function does not operate when any of the following conditions are met.
· The keyless remote is inside the vehicle. · A door or the hood is not closed. · The power mode is set to any mode other than
OFF.
· The keyless remote is not located within a radius of
about 5 feet (1.5 m) from the vehicle when you get out of the vehicle and close the doors.
Auto lock function operation stop beeper After the auto lock function has been activated, the auto lock operation stop beeper sounds for approximately two seconds in the following cases.
· The keyless remote is put inside the vehicle through
a window.
· You are located too close to the vehicle. · The keyless remote is put inside the trunk.
If the warning beeper sounds, check that you are carrying the keyless remote. Then, open/close a door and confirm the auto lock activation beeper sounds once.

Controls

180

https://manual-hub.com/

Controls

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

Using the Remote Transmitter

Locking the doors

Press the lock button.

LED

Lock

Once:

Button

u Some exterior lights flash, all the doors

and fuel fill door lock, and the security

system sets.

Twice (within five seconds after the first

Unlock Button

push): u The beeper sounds and verifies the

security system is set.

Unlocking the doors Press the unlock button. Once:
u Some exterior lights flash twice, and the driver's door and fuel fill door unlocks.
Twice: u The remaining doors unlock.

1Using the Remote Transmitter If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors will automatically relock. You can change the relock timer setting. 2 Customized Features P. 357
The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.
You can lock or unlock doors using the remote transmitter only when the power mode in VEHICLE OFF.
The remote will not lock the vehicle when a door is open.
If the distance at which the remote transmitter works varies, the battery is probably low. If the LED does not come on when you press a button, the battery is dead.
2 Replacing the Remote Battery P. 575
You can customize the door unlock mode setting. 2 Customized Features P. 357

Continued
https://manual-hub.com/

181

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

Controls

Locking/Unlocking the Doors Using a Key
If the lock or unlock button of the remote does not work, use the key instead.

Lock

Fully insert the key and turn it.

Unlock

1Locking/Unlocking the Doors Using a Key When you lock the driver's door with a key, all the other doors and fuel fill door lock at the same time. When unlocking, the driver's door unlocks first. Turn the key a second time within a few seconds to unlock the remaining doors.
You can customize the door unlock mode setting. 2 Customized Features P. 357

Locking a Door Without Using a Key
If you do not have the key on you, or if for some reason you cannot lock a door using the key, you can lock the door without it.

1Locking a Door Without Using a Key
When you lock the driver's door, all the other doors and fuel fill door lock at the same time. Before locking a door, make sure that the key is not inside the vehicle.

Locking the front doors Push the lock tab forward a or push the master door lock switch in the lock direction b, and close the door.

Locking the rear doors Push the lock tab forward and close the door.

Lockout prevention system The doors cannot be locked when the keyless remote is inside the vehicle.

182

https://manual-hub.com/

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside

Locking/Unlocking the Doors from the Inside

Using the Lock Tab

To lock

Lock Tab

Locking a door Push the lock tab forward.

To unlock

Unlocking a door Pull the lock tab rearward.

1Using the Lock Tab
When you lock the door using the lock tab on the driver's door, all the other doors and fuel fill door lock at the same time. When you unlock the door using the lock tab on the driver's door, only the driver's door will unlock.

Controls

Continued
https://manual-hub.com/

183

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside

Unlocking Using the Front Door Inner Handle
Pull the front door inner handle. u The door unlocks and opens in one motion.
Inner Handle

1Unlocking Using the Front Door Inner Handle
The front door inner handles are designed to allow front seat occupants to open the door in one motion. However, this feature requires that front seat occupants never pull a front door inner handle while the vehicle is in motion.
Children should always ride in a rear seat where childproof door locks are provided.
2 Childproof Door Locks P. 185

Unlocking and opening the driver's door from the inner handle unlocks all the other doors and fuel fill door.
To avoid all the doors unlocking use the lock tab on the driver's door to unlock, then lock again before opening the door.
u This setting works for one time only. If you do not want all the doors to unlock all the time, customize the Auto Door Unlock setting to OFF using the audio/ information screen.
2 Customized Features P. 357

Controls

184

https://manual-hub.com/

uuLocking and Unlocking the DoorsuChildproof Door Locks

Controls

Using the Master Door Lock Switch

To unlock

Press the master door lock switch in as shown to lock or unlock all the doors and fuel fill door.

1Using the Master Door Lock Switch
When you lock/unlock either front door using the master lock switch, all the other doors and fuel fill door lock/unlock at the same time.

To lock
Master Door Lock Switch

Childproof Door Locks
The childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab.
Setting the Childproof Door Locks
Slide the lever in the rear door to the lock position, and close the door.

1Childproof Door Locks
To open the door from the inside when the childproof door lock is on, put the lock tab in the unlock position, lower the rear window, put your hand out of the window, and pull the outside door handle.

Unlock

When opening the door Open the door using the outside door handle.

Lock

https://manual-hub.com/

185

uuLocking and Unlocking the DoorsuAuto Door Locking/Unlocking

Auto Door Locking/Unlocking

Your vehicle locks or unlocks all doors automatically when a certain condition is met.
Auto Door Locking
Drive lock mode All doors lock when the vehicle's speed reaches about 10 mph (15 km/h).

1Auto Door Locking/Unlocking
You can turn off or change to another auto door locking/unlocking setting using the audio/ information screen.
2 Customized Features P. 357

Auto Door Unlocking
Driver's door open mode All doors unlock when the driver's door is opened.

Controls

186

https://manual-hub.com/

Opening and Closing the Trunk
Precautions for Opening/Closing the Trunk
Opening the trunk Open the trunk all the way.
u If it is not fully opened, the trunk lid may begin to close under its own weight.
Closing the trunk Keep the trunk lid closed while driving to:
u Avoid possible damage. u Prevent exhaust gas from leaking into the vehicle.
2 Exhaust Gas Hazard P. 84
Using the Trunk Opener
Press and hold the trunk opener on the driver's door to unlock and open the trunk.
2 If You Cannot Open the Trunk P. 622
Trunk Opener

Controls

https://manual-hub.com/

187

uuOpening and Closing the TrunkuUsing the Trunk Release Button

Using the Trunk Release Button
Push up the release button on the trunk lid after the doors are unlocked.
2 If You Cannot Open the Trunk P. 622

Trunk Release Button

Even if the trunk is locked, you can open the trunk if you carry the keyless remote.
u Some exterior lights flash twice and the beeper sounds.

Using the Remote Transmitter

1Using the Trunk Release Button
· If you forget the keyless remote inside, the beeper
will sound and the trunk will not close.
· A person who is not carrying the keyless remote
can unlock the trunk if a person who is carrying it is within range.
· If the beeper sounds after you close the trunk,
move the keyless remote away from the trunk and close again.
· The keyless remote may not operate if it is too close
to the trunk.

Press the trunk release button for approximately one second to unlock and open the trunk.

Trunk Release Button

Controls

188

https://manual-hub.com/

uuOpening and Closing the TrunkuTrunk Main Switch

Trunk Main Switch
Main Switch ON
OFF

The trunk main switch disables the trunk release button on the remote transmitter, trunk release button on the trunk lid and trunk opener on the driver's door to protect luggage in the trunk. 1. Make sure the rear seat-back is not folded
down. 2. Turn off the trunk main switch in the glove
box. 3. Lock the glove box.

1Trunk Main Switch
If you need to give the key to someone else, remove the built-in key from the keyless remote by sliding the release knob, and give the remote as a valet key.

Emergency Trunk Opener
The trunk release lever allows you to open the trunk from inside for your safety.
Slide the release lever in the direction of the arrow.

1Emergency Trunk Opener
Parents should decide if their children should be shown how to use this feature.

Lever

Controls

https://manual-hub.com/

189

Security System

Immobilizer System
This system prevents a key that has not been pre-registered from starting the power system.
Pay attention to the following when pressing the POWER button: · Do not allow objects that emit strong radio waves near the POWER button. · Make sure the key is not covered by or touching a metal object. · Do not bring a key from another vehicle's immobilizer system near the POWER
button. · Do not put the key near magnetic items. Electronic device, such as televisions and
audio systems emit strong magnetic fields. Note that even a key chain can become magnetic.

1Immobilizer System
NOTICE Leaving the key in the vehicle can result in theft or accidental movement of the vehicle. Always take the key with you whenever you leave the vehicle unattended.
Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.
Canadian models
Apply and hold the brake pedal before turning the vehicle on the first time after the 12-volt battery has been disconnected.

Controls

Security System Alarm
The security system alarm activates when the trunk, hood or doors are forcibly opened. The alarm does not activate if the trunk or doors are opened with the key, remote transmitter or keyless access system. However, the alarm activates if a door is opened with the key and then the hood is opened before the power mode is set to ON.

1Security System Alarm Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.
The security alarm continues for a maximum of two minutes until the security system alarm deactivates.

When the security system alarm activates The horn sounds intermittently, and some the exterior lights flash.

To deactivate the security system alarm Unlock the vehicle using the key, remote transmitter or keyless access system, or turn the power mode to ON. The system, along with the horn and flashing lights, is deactivated.
190
https://manual-hub.com/

uuSecurity SystemuSecurity System Alarm

Setting the security system alarm The security system alarm automatically sets when the following conditions have been met: · The power mode is set to VEHICLE OFF. · The hood and trunk are closed. · All doors are locked from outside with the key, remote transmitter, or keyless
access system.
When the security system alarm sets The security system alarm indicator in the instrument panel blinks and the blinking interval changes after about 15 seconds.
To cancel the security system alarm The security system alarm is canceled when the vehicle is unlocked using the remote transmitter or keyless access system, or when the power mode is set to ON. The security system alarm indicator goes off at the same time.

1Security System Alarm
Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when:
· Unlocking the door with the lock tab. · Opening the trunk with the trunk opener or the
emergency trunk opener.
· Opening the hood with the hood release.
If the 12-volt battery goes dead after you have set the security system alarm, the security alarm may go off once the 12-volt battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key, remote transmitter or keyless access system.

Controls

Continued
https://manual-hub.com/

191

uuSecurity SystemuSecurity System Alarm

Panic Mode
Panic Button

The panic button on the remote transmitter
If you press the panic button for approximately one second, the following will occur for about 30 seconds: · The horn sounds. · Some exterior lights flash.

Canceling panic mode · Press any button on the remote transmitter. · Set the power mode to ON.

Controls

192

https://manual-hub.com/

Controls

Windows

Opening/Closing the Power Windows
The power windows can be opened and closed when the power mode is in ON, using the switches on the doors. The driver's side switches can be used to open and close all the windows.

The power window lock button on the driver's side must be switched off (not pushed in, indicator off) to open and close the windows from anywhere other than the driver's seat.

When the power window lock button is pushed in, the indicator comes on and you can only operate the driver's window. Turn the power window lock button on if a child is in the vehicle.

Opening/Closing the Windows with Auto-Open/Close Function

Indicator

On
Off Power Window Lock Button

Manual operation To open: Push the switch down lightly, and hold it until the desired position is reached. To close: Pull the switch up lightly, and hold it until the desired position is reached.

Driver's Window Switch

Front Passenger's Window Switch

Automatic operation To open: Push the switch down firmly. To close: Pull the switch up firmly.
The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.

1Opening/Closing the Power Windows
3 WARNING
Closing a power window on someone's hands or fingers can cause serious injury.
Make sure your passengers are away from the windows before closing them.
The power windows can be operated for up to 10 minutes after you set the power mode to VEHICLE OFF. Opening either front door cancels this function.
Auto Reverse If a power window senses resistance when closing automatically, it will stop closing and reverse direction.
The driver's window auto reverse function is disabled when you continuously pull up the switch.
The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.

Continued
https://manual-hub.com/

193

Controls

uuWindowsuOpening/Closing the Power Windows

Opening/Closing the Windows without Auto-Open/Close Function

Close Open

To open: Push the switch down. To close: Pull the switch up.
Release the switch when the window reaches the desired position.

1Opening/Closing the Power Windows While driving with any of the windows open, you may hear a booming, throbbing, or helicopter-type noise or pressure. This is called wind buffeting. This is a normal occurrence that can be minimized.
If you hear a wind buffeting noise with any of the windows open, lower all of the other windows slightly or open the moonroof*.

Opening the Windows with the Remote
To open: Press the unlock button, and then within 10 seconds, press it again and hold it.

1Opening the Windows with the Remote
Models with moonroof
If you open the windows with the remote, the moonroof will open automatically along with them.

If the windows stop midway, repeat the procedure.

Unlock Button

194 * Not available on all models

https://manual-hub.com/

uuWindowsuOpening/Closing the Power Windows

Opening/Closing the Windows with the Key

Open

To open: Unlock the driver's door with the key. Within 10 seconds of returning the key to the central position, turn the key in the unlock direction and hold it there. To close: Lock the driver's door with the key. Within 10 seconds of returning the key to the central position, turn the key in the lock direction and hold it there.

1Opening/Closing the Windows with the Key
Models with moonroof
If you open/close the windows with the key, the moonroof will open/close automatically along with them.

Release the key to stop the windows at the desired position. If you want further adjustment, repeat the same operation.

Controls

https://manual-hub.com/

195

Controls

Moonroof*

Opening/Closing the Moonroof
You can operate the moonroof when the power mode is in ON. Use the switch in the front of the ceiling to open and close the moonroof.

Using the Moonroof Switch

Open

Automatic operation To open: Pull the switch back firmly.

To close: Push the switch forward firmly.

Tilt

The moonroof automatically opens or closes all the way. To stop the moonroof midway, pull or push the switch briefly.
Manual operation To open: Pull the switch back lightly, and hold it until the desired position is reached. To close: Push the switch forward lightly, and hold it until the desired position is reached.
Tilting the moonroof up To tilt: Push on the center of the moonroof switch. To close: Push the switch forward firmly, then release.

1Opening/Closing the Moonroof
3 WARNING
Opening or closing the moonroof on someone's hands or fingers can cause serious injury.
Make sure all hands and fingers are clear of the moonroof before opening or closing it.
NOTICE Opening the moonroof in below freezing temperature or when it is covered with snow or ice can damage the moonroof panel or motor.
The moonroof can be operated for up to 10 minutes after you set the power mode to VEHICLE OFF. Opening either front door cancels this function.
When resistance is detected, the auto reverse function causes the moonroof to change directions, then stop. Auto reverse stops sensing when the moonroof is almost closed to ensure that it fully closes.
You can use the remote transmitter or the key to operate the moonroof.
2 Opening the Windows with the Remote P. 194
2 Opening/Closing the Windows with the Key P. 195

196 * Not available on all models

https://manual-hub.com/

Operating the Switches Around the Steering Wheel
POWER Button
Changing the Power Mode
VEHICLE OFF (LOCK) The button is off. The power to all electrical components is turned off.

1POWER Button POWER Button Operating Range You can start the power system when the keyless remote is inside the vehicle.
Operating Range

Controls

ACCESSORY The button blinks (in red). Operate the audio system and other accessories in this position.
ON The button blinks (in red). All electrical components can be used.
Without pressing the brake pedal Press the button.

The power system may also start if the keyless remote is close to the door or window, even if it is outside the vehicle.
ON mode: The button is on (in red), if the power system is on.
If the battery of the keyless remote is getting low, the power system may not start when you push the POWER button. If the power system does not start, refer to the following link.
2 If the Keyless Remote Battery is Weak P. 602
Do not leave the power mode in ACCESSORY or ON when you get out.

Continued
https://manual-hub.com/

197

uuOperating the Switches Around the Steering WheeluPOWER Button
Automatic Power Off
If you leave the vehicle for 30 to 60 minutes with the transmission in (P and the power mode in ACCESSORY, the vehicle automatically goes into the mode similar to VEHICLE OFF (LOCK) to avoid draining the 12-volt battery.
Power Mode Reminder
If you open the driver's door when the power mode is in ACCESSORY, a warning beep sounds.

Controls

198

https://manual-hub.com/

uuOperating the Switches Around the Steering WheeluPOWER Button

Keyless Remote Reminder
When the power mode is set to any mode other than OFF and you remove the keyless remote from the vehicle and shut the door, an alarm will sound. If the alarm continues to sound, place the keyless remote in another location.
When the power mode is in ACCESSORY
The alarm will sound from outside the vehicle.
When the power mode is in ON An alarm will sound both inside and outside the vehicle. In addition, a warning indicator will appear on the instrument panel.

1Keyless Remote Reminder When the keyless remote is within the system's operational range, and all the doors are closed, the warning function cancels.
If the keyless remote is taken out of the vehicle after the power system has been turned on, you can no longer change the POWER button mode or restart the power system. Always make sure if the keyless remote is in your vehicle when you operate the POWER button.
Removing the keyless remote from the vehicle through a window does not activate the warning buzzer.
Do not put the keyless remote on the dashboard or in the glove box. It may cause the warning buzzer to go off. Under some other conditions that can prevent the vehicle from locating the keyless remote, the warning buzzer may also go off even if the keyless remote is within the system's operational range.

Controls

https://manual-hub.com/

199

uuOperating the Switches Around the Steering WheeluTurn Signals

Turn Signals
(A) (B) (B) (A)

The turn signals can be used when the power mode is in ON.
(A): Turn signal Push the lever up or down based on the direction you want to turn, and the turn signal will blink.

1Turn Signals
The turn signal indicator on the instrument panel will blink when the external turn signal blinks.
2 Indicators P. 88

(B): One-touch turn signal When you lightly push the lever up or down and release it, the turn signal will blink 3 times.

Controls

200

https://manual-hub.com/

uuOperating the Switches Around the Steering WheeluLight Switches

Light Switches
Manual Operation
Models without default AUTO position switch
High Beams
Flashing the high beams Low Beams
Models with default AUTO position switch
High Beams
Flashing the high beams Low Beams
Turns on parking, side marker, tail, and rear license plate lights Turns on headlights, parking, side marker, tail, and rear license plate lights

Rotating the light switch turns the lights on and off, regardless of the power mode setting.
High beams Push the lever forward until you hear a click.
Low beams When in high beams, pull the lever back to return to low beams.
Flashing the high beams Pull the lever back, and release it.
Models with default AUTO position switch
Lights off Rotate the switch to OFF either when: · The transmission is in (P. · The parking brake is applied.
To turn the lights on again, rotate the switch to OFF to cancel the lights off mode. Even if you do not cancel the lights off mode, the lights come on automatically when: · The transmission is taken out of (P and the
parking brake is released. · The vehicle starts to move.

1Light Switches If you leave the power mode in VEHICLE OFF while the lights are on, a chime sounds when the driver's door is opened.
When the lights are on, the lights on indicator in the instrument panel will be on.
2 Lights On Indicator P. 104
If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer.
Do not leave the lights on when the power system is off because it will cause the 12-volt battery to discharge.

Continued
https://manual-hub.com/

Controls

201

uuOperating the Switches Around the Steering WheeluLight Switches

Automatic Operation (automatic lighting control)

Models without default AUTO position Automatic lighting control can be used when

switch

the power mode is in ON.

1Automatic Operation (automatic lighting control)
We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.

Models with default AUTO position switch

Models without default AUTO position switch
When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.
Models with default AUTO position switch
When the light switch is in AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.

The light sensor is in the location shown below. Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.
Models without automatic intermittent wipers
Light Sensor

The headlights comes on when you unlock a door in dark areas with the headlight switch in AUTO.
u Once you lock the door, the headlights will go off.

Models with automatic intermittent wipers
Light Sensor

Controls

202

https://manual-hub.com/

uuOperating the Switches Around the Steering WheeluFog Lights*

Controls

Headlight Integration with Wipers
The headlights automatically come on when the wipers are used several times within a certain number of intervals with the headlight switch in AUTO. The headlights automatically go off a few minutes later if the wipers are stopped.
Automatic Lighting Off Feature
The headlights, all other exterior lights, and the instrument panel lights turn off 15 seconds after you set the power mode to VEHICLE OFF, take the keyless remote with you, and close the driver's door.
If you set the power mode to VEHICLE OFF with the headlight switch on, but do not open the door, the lights turn off after 10 minutes (three minutes, if the switch is in the AUTO position).
The lights turn on again when you unlock or open the driver's door. If you unlock the door, but do not open it within 15 seconds, the lights go off. If you open the driver's door, you will hear a reminder chime alerting you that the lights are on.

Fog Lights*

When the low beam headlights are on, turn the fog light switch on to use the fog lights.

1Automatic Operation (automatic lighting control)
U.S. models
You can adjust the auto light sensitivity as follows:

Setting

The exterior lights come on when the ambient light is at

Max High

Bright

Mid

Low Min

Dark

2 Customized Features P. 357

1Headlight Integration with Wipers
This feature activates while the headlights are off in AUTO. The instrument panel brightness does not change when the headlights come on.

At dark ambient light levels, the automatic lighting control feature turns on the headlights, regardless of the number of wiper sweeps.

You can turn the headlight integration with wipers function on and off.
2 Customized Features P. 357
1Automatic Lighting Off Feature You can change the headlight auto off timer setting. 2 Customized Features P. 357

Fog Light Switch

* Not available on all models

https://manual-hub.com/

203

uuOperating the Switches Around the Steering WheeluDaytime Running Lights
Daytime Running Lights
The parking/daytime running lights come on when the following conditions have been met:
· The power mode is in ON. · The headlight switch is OFF or AUTO. · The parking brake is released.
The lights remain on even if you set the parking brake. Setting the power mode to VEHICLE OFF will turn off the daytime running lights.
The daytime running lights are off once the headlight switch is turned on, or when the head light switch is in AUTO and it is getting darker outside.

Controls

204

https://manual-hub.com/

uuOperating the Switches Around the Steering WheeluAuto High-Beam

Controls

Auto High-Beam
The front sensor camera detects the light sources ahead of the vehicle such as the lights of a preceding or oncoming vehicle, or street lights. When you are driving at night, the system automatically switches the headlights between low beam and high beam depending on the situation.
Front Sensor Camera

1Auto High-Beam
The auto high-beam system does not always operate in every situation. This system is just for assisting the driver. Always observe your surroundings and switch the headlights between high beam and low beam manually if necessary.

If you find the timing of beam changes inconvenient for driving, change the headlight beams manually.

The range and the distance at which the camera can recognize varies depending on conditions surrounding your vehicle.

How to Use the Auto High-Beam

When all of the following conditions have been met, the auto high-beam indicator

comes on and the auto high-beam is activated.

· The power mode is in ON.

Auto High-Beam Indicator
Light Switch

· The light switch is in AUTO. · The lever is in the low beam position. · The headlights have been automatically
activated.

· It is dark outside the vehicle.

Regarding the handling of the camera mounted to the inside of the windshield, refer to the following.
2 Front Sensor Camera P. 499
For the auto high-beam to work properly:
· Do not place an object that reflects light on the
dashboard.
· Keep the windshield around the camera clean. · When cleaning the windshield, be careful not to
apply the windshield cleanser to the camera lens.
· Do not attach an object, sticker or film to the area
around the camera.
· Do not touch the camera lens.

If the auto high-beam indicator does not come on even when all the conditions have been met, carry out the following procedure and the indicator will come on. · Pull the lever toward you for flashing the high beams then release it while driving.

If the camera receives a strong impact, or repairing of the area near the camera is required, consult a dealer.

Continued
https://manual-hub.com/

205

uuOperating the Switches Around the Steering WheeluAuto High-Beam

Automatic switching between high-beam and low-beam
When auto-high beam is active, the headlights switch between high beam and low beam based on the following conditions.

Switching to high beam:

Switching to low beam:

All of the following conditions must be met before the high beams turn on. Your vehicle speed is 25 mph (40
km/h) or more. There are no preceding or
oncoming vehicle with headlights or taillights turned on. There are few street lights on the road ahead.

One of the following conditions must be met before the low beams turn on. Your vehicle speed is 15 mph (24
km/h) or less. There is a preceding or oncoming
vehicle with headlights or taillights turned on. There are many street lights on the road ahead.

Controls

Manual switching between high-beam and low-beam
If you want to manually switch the headlights between high beam and low beam, follow either of the procedures below. Note that when you do this, the auto highbeam indicator will turn off and the auto high-beam will be deactivated.

Using the lever: Pull the lever toward you for flashing the high beams then release it within about one second while driving.
u To reactivate the auto high-beam, pull the lever toward you for flashing the high beams then release it while driving. The auto high-beam indicator will come on.
Using the light switch: Turn the light switch to .
u To reactivate the auto high-beam, turn the light switch to AUTO when the lever is in the low beam position, the auto high-beam indicator will come on.
206
https://manual-hub.com/

1How to Use the Auto High-Beam
In the following cases, the auto high-beam system may not switch the headlights properly or the switching timing may be changed. In case of the automatic switching operation does not fit for your driving habits, please switch the headlights manually.
· The brightness of the lights from the preceding or
oncoming vehicle is intense or poor.
· Visibility is poor due to the weather (rain, snow,
fog, windshield frost, etc.).
· Surrounding light sources, such as street lights,
electric billboards and traffic lights are illuminating the road ahead.
· The brightness level of the road ahead constantly
changes.
· The road is bumpy or has many curves. · A vehicle suddenly appears in front of you, or a
vehicle in front of you is not in the preceding or oncoming direction.
· Your vehicle is tilted with a heavy load in the rear. · A traffic sign, mirror, or other reflective object
ahead is reflecting strong light toward the vehicle.
· The oncoming vehicle frequently disappears under
roadside trees or behind median barriers.
· The preceding or oncoming vehicle is a motorcycle,
bicycle, mobility scooter, or other small vehicle.
The auto high-beam system keeps the headlight low beam when:
· Windshield wipers are operating at a high speed. · The camera has detected dense fog.

Controls

uuOperating the Switches Around the Steering WheeluAuto High-Beam

How to Turn Off the Auto High-Beam

You can turn the auto high-beam system off. If you want to turn the system off or

on, set the power mode to ON, then carry out the following procedures while the

vehicle is stationary.

AUTO Position

To turn the system off: With the light switch is in AUTO, pull the lever

toward you and hold it for at least 40 seconds.

After the auto high-beam indicator light blinks

twice, release the lever.

To turn the system on: With the light switch is in AUTO, pull the lever toward you and hold it for at least 30 seconds. After the auto high-beam indicator light blinks once, release the lever.

1How to Use the Auto High-Beam
If the Some Driver Assist Systems Cannot Operate: Camera Temperature Too High message appears:
· Use the climate control system to cool down the
interior and, if necessary, also use defroster mode with the airflow directed toward the camera.
· Start driving the vehicle to lower the windshield
temperature, which cools down the area around the camera.
If the Some Driver Assist Systems Cannot Operate: Clean Front Windshield message appears:
· Park your vehicle in a safe place, and clean the
windshield. If the message does not disappear after you have cleaned the windshield and driven for a while, have your vehicle checked by a dealer.

1How to Turn Off the Auto High-Beam
If you turn the auto high-beam system off, the system does not operate until you turn the system on.

Park in a safe place before turning the system off or on.

https://manual-hub.com/

207

uuOperating the Switches Around the Steering WheeluWipers and Washers

Controls

Wipers and Washers

Windshield Wiper/Washer
The windshield wipers and washers can be used when the power mode is in ON.

Pull to use washer.
Intermittent Time Adjustment Ring*
MIST OFF INT*1/AUTO*2 LO: Low speed wipe HI: High speed wipe

MIST The wipers run at high speed until you release the lever.
Wiper switch (OFF, INT*1/AUTO*2, LO, HI)
Move the lever up or down to change the wiper settings.
Adjusting wiper operation* Turn the adjustment ring to adjust the wiper operation.
Lower speed, fewer sweeps
Higher speed, more sweeps

Washer Sprays while you pull the lever toward you. When you release the lever for more than one second, the spray stops, the wipers sweep two or three more times to clear the windshield, then stop.
*1: Models with manual intermittent operation *2: Models with automatic intermittent operation
208 * Not available on all models
https://manual-hub.com/

1Wipers and Washers
NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.
NOTICE Turn the washers off if no washer fluid comes out. The pump may get damaged.
The wiper motor may stop motor operation temporarily to prevent an overload. Wiper operation will return to normal within a few minutes.
Models with intermittent time adjustment ring
If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle speeds up, the wiper operation's shortest delay setting ( ) and the LO setting become the same.
NOTICE In cold weather, the blades may freeze to the windshield. Operating the wipers in this condition may damage the wipers. Use the defroster or heated windshield* to warm the windshield, then turn the wipers on.

Controls

uuOperating the Switches Around the Steering WheeluWipers and Washers

Automatic Intermittent Wipers*
When you push the lever down to AUTO, the windshield wipers sweep once, and go into the automatic mode.

Adjustment Ring

The wipers operate intermittently, at low speed, or at high speed and stop in accordance with the amount of rainfall the rainfall sensor detects.

1Wipers and Washers If the wipers stop operating due to an obstacle such as the buildup of snow, park the vehicle in a safe place. Rotate the wiper switch to OFF, and set the power mode to ACCESSORY or VEHICLE OFF, then remove the obstacle.
1Automatic Intermittent Wipers* The rainfall sensor is in the location shown below.

AUTO sensitivity adjustment When the wiper function is set to AUTO, you can adjust the sensitivity of the rainfall sensor (using the adjustment ring) so that wipers will operate in accordance with your preference.

Rainfall Sensor

Sensor sensitivity
Low sensitivity
High sensitivity

NOTICE
AUTO should always be turned OFF before the following situations in order to prevent severe damage to the wiper system:
· Cleaning the windshield · Driving through a car wash · No rain present

* Not available on all models

https://manual-hub.com/

209

uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror Button

Rear Defogger/Heated Door Mirror Button
Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the power mode is in ON.
The rear defogger and heated door mirror automatically switches off after 10-30 minutes depending on the outside temperature. However, if the outside temperature is 32°F (0°C) or below, it does not automatically switch off.

1Rear Defogger/Heated Door Mirror Button
This system consumes a lot of power, so turn it off when the window has been defogged. Also, do not use the system for a long time while the power system is stopped. This may weaken the 12-volt battery, making it difficult to turn the power system on.
When the power mode is set to ON and the outside temperature is below 41°F (5°C), the heated door mirror may automatically activate for 10 minutes.

Canadian models
Heated Windshield Button
Press the heated windshield button to deice the windshield when the power mode is in ON.

1Heated Windshield Button
This system consumes a lot of power, so turn it off when the window has been deiced. Also, do not use the system for a long period when the power system is stopped. This may weaken the 12-volt battery, making it difficult to turn the power system on.

Controls

210

https://manual-hub.com/

uuOperating the Switches Around the Steering WheeluBrightness Control

Brightness Control

Adjusting the Instrument Panel Brightness

Control Dial

When the power mode is in ON, you can use the brightness control dial to adjust instrument panel brightness. Brighten: Turn the dial up. Dim: Turn the dial down.

You will hear a beeper when the brightness reaches minimum or maximum. Several seconds after adjusting the brightness, you will be returned to the previous screen.
Brightness level indicator The brightness level is shown on the driver information interface while you are adjusting it.

1Brightness Control
The brightness of the instrument panel will be reduced when the following conditions:
· The power mode is in ON. · The parking lights are turned on. · The ambient lighting is low.
The brightness can be set differently for when the exterior lights are on, and when they are off.

Controls

Continued
https://manual-hub.com/

211

uuOperating the Switches Around the Steering WheeluBrightness Control

Adjusting the Head-Up Display Brightness*
When the head-up display is on, press and hold the HUD button until its brightness level indicator on the driver information interface. Brighten: Press the 3 button. Dim: Press the 4 button.

3 / 4 Button HUD Button

Several seconds after you have adjusted the brightness or press the HUD button, you will be returned to the previous screen.
Brightness level indicator The brightness level is shown on the driver information interface while you are adjusting it.

Controls

212 * Not available on all models

https://manual-hub.com/

uuOperating the Switches Around the Steering WheeluDriving Position Memory System*

Driving Position Memory System*
You can store two driver's seat positions (except for power lumbar) with the driving position memory system. When you unlock and open the driver's door with a remote transmitter or keyless access system, the seat adjusts to retracted positions of one of the two preset positions automatically. The seat will move to the stored position when you set the power mode to ACCESSORY.

1Driving Position Memory System* Using the audio/information screen, you can disable the automatic seat adjustment function. 2 Customized Features P. 357
The driver's seat easy exit feature can be turned ON/ OFF.
2 Customized Features P. 357

When you enter the vehicle, the driver information interface briefly shows you which

remote transmitter you used to unlock the vehicle.

· DRIVER 1 transmitter is linked to memory button 1.

· DRIVER 2 transmitter is linked to memory button 2.

DRIVER 1

DRIVER 2

The driver's seat moves rearward depending on the set seating position once you

· Stop the vehicle.

· Put the transmission in (P.

· Set the power mode to VEHICLE OFF.

· Open the driver's door.

Once the power mode is in the ACCESSORY

position, the driver's seat moves forward to

the DRIVER 1 or 2 preset position.

System Operation The system will not operate if:
· Either memory button is pressed while the seat is in
motion.
· The seat position is adjusted while in operation. · Either of the memorized positions is set fully to the
rear.
The system may not recognize a key if:
· The key is in close proximity to a cell phone or other
wireless device.
· Both keys are in the vehicle at the same time. · The Driving Position Memory System is disabled in
customized features.
· Opening driver's door without fully grabbing door
handle.

Controls

* Not available on all models

Continued
https://manual-hub.com/

213

Controls

uuOperating the Switches Around the Steering WheeluDriving Position Memory System*

Storing a Position in Memory

Memory Button 2
Memory Button 1

SET Button

1. Set the power mode to ON. Adjust the driver's seat to the desired position.
2. Press the SET button. u You will hear the beeper, and the memory button indicator light will blink.
3. Press memory button (1 or (2 within five seconds of pressing the SET button. u Once the seat position has been memorized, the indicator light on the button you pressed stays on and you will hear the double-beep.

1Storing a Position in Memory
After you press the SET button, the storing operation will be canceled when:
· You do not press the memory button within five
seconds.
· You readjust the seat position before the double-
beep.
· You set the power mode to any position except
ON.

Recalling the Stored Position

Memory Buttons

1. Put the transmission into (P. 2. Apply the parking brake. 3. Press a memory button ((1 or (2).
u You will hear a beep, and the indicator light will blink.

SET Button

The seat will automatically move to the memorized position. When it has finished moving, you will hear the beeper twice, and the indicator light stays on.

1Recalling the Stored Position
The seat will stop moving if you:
· Press the SET button or memory button (1 or (2. · Adjust the seat position. · Put the transmission into a position other than (P.

214

https://manual-hub.com/

uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel

Adjusting the Steering Wheel

The steering wheel height and distance from your body can be adjusted so that you

can comfortably grip the steering wheel in an appropriate driving posture.

To lock

1. While the vehicle is stopped, push the steering wheel adjustment lever down.

u The steering wheel adjustment lever is

under the steering column.

2. Move the steering wheel up or down, and

in or out.

u Make sure you can see the instrument

Lever

To adjust

panel gauges and indicators. 3. Pull the steering wheel adjustment lever up

to lock the steering wheel in position.

u After adjusting the position, make sure

you have securely locked the steering

wheel in place by trying to move it up,

down, in, and out.

1Adjusting the Steering Wheel
3 WARNING
Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.

Controls

https://manual-hub.com/

215

Controls

Mirrors

Interior Rearview Mirror
Adjust the angle of the rearview mirror when you are sitting in the correct driving position.
Rearview Mirror with Day and Night Positions*
Flip the tab to switch the position. Tab The night position will help to reduce the glare
from headlights behind you when driving after dark.

1Mirrors Keep the inside and outside mirrors clean and adjusted for best visibility.
Adjust the mirrors before you start driving. 2 Front Seats P. 218

Daytime Position

Night Position

Automatic Dimming Rearview Mirror*
When you are driving after dark, the automatic dimming rearview mirror reduces the glare from headlights behind you. Press the auto button to turn this function on and off. When activated, the auto indicator comes on.

1Automatic Dimming Rearview Mirror*
The auto dimming function cancels when the transmission is in (R.

AUTO button

216 * Not available on all models

https://manual-hub.com/

Power Door Mirrors
Selector Switch Adjustment Switch

You can adjust the door mirrors when the power mode is in ON.
Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position. Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.

Reverse Tilt Door Mirror*

Selector Switch

If activated, the passenger side door mirror automatically tilts downward when you put the transmission into (R: this improves closein visibility on the passenger side of the vehicle when backing up. The mirror automatically returns to its original position when you take the transmission out of (R.

To activate this feature, set the power mode to ON and slide the selector switch to the passenger's side.

* Not available on all models

https://manual-hub.com/

uuMirrorsuPower Door Mirrors
217

Controls

Seats

Front Seats
Allow sufficient space.

Move back.

Adjust the driver's seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright, well back in the seat and be able to adequately press the pedals without leaning forward, and grip the steering wheel comfortably. The passenger's seat should be adjusted in a similar manner, so that it is as far back from the front airbag in the dashboard as possible.

Adjusting the Seat Positions
Adjusting the front power seat(s)*

Horizontal Position Adjustment

1Seats Always make seat adjustments before driving.
1Front Seats
3 WARNING
Sitting too close to a front airbag can result in serious injury or death if the front airbags inflate.
Always sit as far back from the front airbags as possible while maintaining control of the vehicle.
The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.

Controls

Height Adjustment (Driver's seat only)
218 * Not available on all models

Seat-back Angle Adjustment
https://manual-hub.com/

Lumbar Support Adjustment Switch

Lumbar Support Adjustment Switch* (Driver's seat only) Press the top: To move the lumbar support up. Press the bottom: To move the lumbar support down. Press the front: To increase the entire lumbar support. Press the rear: To decrease the entire lumbar support.

uuSeatsuFront Seats

Controls

* Not available on all models

Continued
https://manual-hub.com/

219

uuSeatsuFront Seats
Adjusting the front manual seat(s)*
Height Adjustment (Driver side only) Pull up or push down the lever to raise or lower the seat.

1Adjusting the front manual seat(s)*
Once a seat is adjusted correctly, rock it back and forth to make sure it is locked in position.

Horizontal Position Adjustment Pull up on the bar to move the seat, then release the bar.

Driver's seat is shown.

Seat-back Angle Adjustment Pull up the lever to change the angle.

Controls

220 * Not available on all models

https://manual-hub.com/

uuSeatsuFront Seats

Adjusting the Seat-Backs
Adjust the driver's seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel.
The front seat passenger should also adjust their seat-back to a comfortable, upright position.

1Adjusting the Seat-Backs
3 WARNING
Reclining the seat-back too far can result in serious injury or death in a crash.
Adjust the seat-back to an upright position, and sit well back in the seat.
Do not put a cushion, or other object, between the seat-back and your back.

Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant's chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.

Doing so may interfere with proper seat belt or airbag operation.
If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help.

Controls

https://manual-hub.com/

221

Controls

uuSeatsuRear Seats

Rear Seats
Folding Down the Rear Seats
1. Remove the center shoulder belt from the guide.
Guide

1Folding Down the Rear Seats The rear seat-backs can be folded down to accommodate bulkier items in the trunk.
Never drive with the seat-back folded down and the trunk lid open.
2 Exhaust Gas Hazard P. 84

Center Shoulder Belt
Release Lever

2. Pull the release lever in the trunk to release the lock.

To lock a seat-back upright, push it backwards until it locks. When returning the seat-back to its original position, push it firmly back. Also, make sure all rear shoulder belts are positioned in front of the seat-back, and the center shoulder belt is re-positioned in the guide.

Make sure that the folded seat-back does not press against the front passenger seat, as this can cause the weight sensors in the front passenger seat to work improperly.
2 Passenger Airbag Off Indicator P. 68

3. Fold the seat-back down.

Make sure all items in the trunk or items extending through the opening into the rear seat is properly secured. Loose items can fly forward if you have to brake hard.

The front seat(s) must be far enough forward so they do not interfere with the rear seats as they fold down.

222

https://manual-hub.com/

uuSeatsuRear Seats

Rear Seat Reminder
This feature alerts you to the possible presence of passengers or items in the rear seats before you exit the vehicle. It activates when the vehicle is set to VEHICLE OFF if the rear doors were opened shortly before or after the vehicle was set to ON.
A reminder appears on the driver information interface and an alert will sound when the power mode is set to VEHICLE OFF.

1Rear Seat Reminder When the power mode is set to VEHICLE OFF, the reminder comes on briefly, then the function is deactivated.
The reminder will not work if the power mode has not been set to ON within 10 minutes of operating the rear doors.
The system does not detect passengers in the rear seats. Instead, it can detect when a rear door is opened and closed, indicating that there may be something in the rear seats.

You can turn off the notification setting*. 2 Customized Features P. 357

Controls

* Not available on all models

https://manual-hub.com/

223

uuSeatsuMaintain a Proper Sitting Position

Maintain a Proper Sitting Position
After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the power system is off.
Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.

1Maintain a Proper Sitting Position
3 WARNING
Sitting improperly or out of position can result in serious injury or death in a crash.
Always sit upright, well back in the seat, with your feet on the floor.

In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.

Controls

224

https://manual-hub.com/

uuSeatsuHead Restraints

Head Restraints

Your vehicle is equipped with head restraints in all seating positions.
Adjusting the Front and Rear Outer Head Restraint Positions

Position head in the center of the head restraint.

Head restraints are most effective for protection against whiplash and other rearimpact crash injuries when the center of the back of the occupant's head rests against the center of the restraint. The tops of the occupant's ears should be level with the center height of the restraint.

To raise the head restraint: Pull it upward. To lower the head restraint: Push it down while pressing the release button.

1Head Restraints
3 WARNING
Improperly positioning head restraints reduces their effectiveness and increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.
In order for the head restraint system to work properly:
· Do not hang any items on the head restraints, or
from the restraint legs.
· Do not place any objects between an occupant and
the seat-back.
· Install each restraint in its proper location.

Controls

Continued
https://manual-hub.com/

225

uuSeatsuHead Restraints

Removing and Reinstalling the Head Restraints
Head restraints can be removed for cleaning or repair.
To remove a head restraint: Pull the restraint up as far as it will go. Then, push the release button and pull the restraint up and out.
To reinstall a head restraint: Insert the legs back in place, then adjust the head restraint to an appropriate height while pressing the release button. Pull up on the restraint to make sure it is locked in position.

1Removing and Reinstalling the Head Restraints
3 WARNING
Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.
Always replace the head restraints before driving.

Controls

226

https://manual-hub.com/

Armrest
Using the Front Seat Armrest
The console lid can be used as an armrest.
Using the Rear Seat Armrest
Pull down the armrest in the center backrest.

uu Seats u Armrest

Controls

https://manual-hub.com/

227

Controls

Interior Convenience Items

Interior Lights
Interior Light Switches
Front*
Off

Door Activated Position

Rear

Door Activated Position
On

Off

ON The interior lights come on regardless of whether the doors are open or closed.
Door activated The interior lights come on in the following situations: · When any of the doors are opened. · You unlock the driver's door. · When the power mode is set to VEHICLE
OFF.
OFF The interior lights remain off regardless of whether the doors are open or closed.

1Interior Light Switches
In the door activated position, the interior lights fade out and go off about 30 seconds after the doors are closed. The lights go off after 30 seconds in the following situations:
· When you unlock the driver's door but do not open
it.
· When you set the power mode to VEHICLE OFF but
do not open a door. You can change the interior lights dimming time.
2 Customized Features P. 357
The interior lights go off immediately in the following situations:
· When you lock the driver's door. · When you set the power mode to ON. · When you close the driver's door in ACCESSORY
mode.
If you leave any of the doors open in VEHICLE OFF mode, the interior lights go off after about 15 minutes.
To avoid draining the 12-volt battery, do not leave the interior light on for an extended length of time when the power system is off.

228 * Not available on all models

https://manual-hub.com/

uuInterior Convenience ItemsuInterior Lights

Map Light Switches

The map lights can be turned on and off by pressing the lenses.

1Map Light Switches
Models with moonroof
When the interior light switch is in the door activated position and any door is open, the map light will not go off when you press the lens.

Controls

https://manual-hub.com/

229

uuInterior Convenience ItemsuStorage Items

Storage Items
Glove Box
Glove Box Handle
To Lock

Pull the handle to open the glove box.
You can lock the glove box with the built-in key.

1Glove Box
3 WARNING
An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt.
Always keep the glove box closed while driving.

Center Pocket

Push the cover to open the pocket.

Controls

230

https://manual-hub.com/

Console Compartment

Pull the handle to open the console compartment.

uuInterior Convenience ItemsuStorage Items
1Console Compartment The console compartment light* comes on when the parking lights are on.

Removable tray The tray in the console compartment is detachable. Pull up the tray to remove it.

Controls

* Not available on all models

Continued
https://manual-hub.com/

231

uuInterior Convenience ItemsuStorage Items

Beverage Holders

Front seat beverage holders Are located in the console between the front seats.

1Beverage Holders
NOTICE Spilled liquids damage the upholstery, carpeting, and electrical components in the interior.
Be careful when you are using the beverage holders. Hot liquid can scald you.

Front

Door side beverage holders Are located on both of front and rear door side pockets.

Rear

Controls

232

https://manual-hub.com/

Rear seat beverage holders Fold the armrest down to use the rear seat beverage holders.

uuInterior Convenience ItemsuStorage Items

Sunglasses Holder
Push

To open the sunglasses holder, push and release the indent. To close, push it again until it latches.

1Sunglasses Holder
Keep the holder closed while driving except when accessing stored items.

You can store eyeglasses and other small items in this holder.

Controls

Continued
https://manual-hub.com/

233

uuInterior Convenience ItemsuStorage Items

Coat Hook

There is a coat hook on the rear left grab handle. Pull it down to use it.

1Coat Hook
The coat hook is not designed for large or heavy items.

Cargo Hook

The cargo hook in the trunk can be used to install a net for securing items.

1Cargo Hook Heavy objects may damage the hook. Make sure any items put on this hook weigh less than 6.6 lbs (3 kg).
Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.
2 Maximum Load Limit P. 413

Controls

234

https://manual-hub.com/

uuInterior Convenience ItemsuOther Interior Convenience Items

Other Interior Convenience Items

Accessory Power Sockets

The accessory power sockets can be used when the power mode is in ACCESSORY

or ON.

Center pocket

Open the cover to use it.

1Accessory Power Sockets
NOTICE Do not insert an automotive type cigarette lighter element. This can overheat the accessory power socket.
The accessory power socket is designed to supply power for 12-volt DC accessories that are rated 180 watts (15 amps) or less.

To prevent 12-volt battery drain, only use the accessory power socket with the power system on.

Console compartment Open the console lid and the cover to use it.

When both sockets are being used, the combined power rating of the accessories should not exceed 180 watts (15 amps).
When the accessory power socket is not in use, close the cover to prevent any small foreign objects from getting into the accessory power socket.

Controls

Continued
https://manual-hub.com/

235

uuInterior Convenience ItemsuOther Interior Convenience Items

Wireless Charger*

To use the wireless charger, the power mode must be in ACCESSORY or ON.

Charge any devices compatible with Qi wireless charging on the area indicated by

the mark as follows:

Amber Indicator Green Indicator

1. To turn the system on and off, press and hold the (power) button. u When the system is activated, the green

indicator light comes on.

2. Place the device you want to charge on the

charging area. u The system will automatically start

charging the device, and the amber

Charging Area (Power) Button

indicator light will come on. u Make sure that the device is compatible
with the system, and placed with the chargeable side in the center of the

charging area.

3. When charging is completed, the green

indicator light will come on. u Depending on the device, the amber

indicator light will stay on.

1Wireless Charger*
RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
In order to use safely:
· Remove any metal objects from the charge pad
before charging a device.
· Do not open the charger case. · Do not use the charger if it malfunctions. Contact
your dealer.
If the charger interferes with radio communications, attempt to correct the interference:
· Press and hold the switch on the charger for a few
seconds to turn off the charger.
appears on the audio/information screen when the device is being charged by the wireless charger.

Controls

236 * Not available on all models

https://manual-hub.com/

uuInterior Convenience ItemsuOther Interior Convenience Items

Controls

When charging does not start Perform one of the solutions in the following table.

Indicator

Cause

There is an obstacle(s) between the charging area and the device.

Green &
Amber

Blinking simultaneously

The device is not within the charging area.

The temperature of the wireless charger pad increases.

Amber Blinking The wireless charger is faulty.

Solution
Remove the obstacle(s).
Pick up and reset the device to the center of the charging area where is located.
Temporarily suspend charging the device. Wait for the temperature to drop and attempt to charge the device again.
Contact a dealer for repairs.

1Wireless Charger*
3 CAUTION
Metal objects between the charge pad and the device to be charged will get hot and can burn you. · Always remove foreign objects from
the charge pad before charging the device. · Be sure the surface is clear of dust and other debris before charging. · Do not spill liquids (i. e. water, drinks, etc.) on the charger and the device. · Do not use oil, grease, alcohol, benzine or thinner for cleaning the charge pad. · Do not cover the system with towels, clothing, or other objects while charging etc. · Avoid spraying aerosols which may come in contact with the charge pad surface.

* Not available on all models

Continued
https://manual-hub.com/

This system consumes a lot of power. Do not use the system for a long time when the power system is off. This may weaken the 12-volt battery, making it difficult to turn the power system on.
When using the wireless charger, check the user's manual that came with the compatible device you want to charge.

237

Controls

uuInterior Convenience ItemsuOther Interior Convenience Items

1Wireless Charger*
The wireless charger can support up to 15W, but the charging rate varies based on the device and other conditions.
NOTICE Do not place any magnetic recording media or precision machines within the charging area while charging. The data on your cards such as credit cards can be lost because of the magnetic effect. Also, precision machines such as watches may malfunction.
"Qi" and marks are the registered trademarks owned by Wireless Power Consortium (WPC).
In the following cases, charging may stop or not start:
· The device is already fully charged. · The temperature of the device is extremely high
while charging.
· You are at a place that emits strong
electromagnetic waves or noises such as TV station, electric power plant, or gas station.
· The device has a cover, case or accessories which
are not compatible with wireless charging.

238 * Not available on all models

https://manual-hub.com/

* Not available on all models

uuInterior Convenience ItemsuOther Interior Convenience Items
1Wireless Charger* A device may not charge if the size or shape of its chargeable side is not appropriate for use with the charging area.
Not all devices are compatible with the system.
During the charging phase, it is normal for the charging area and device to heat up.
Charging may be briefly interrupted when:
· All the doors or the trunk are closed
- to avoid interference with the proper functioning of the keyless access system.
· The position of the device is altered.
Do not charge more than one device at a time on a charging area.
If the device becomes too hot and its battery protection function activates, it may charge extremely slowly or no longer charge. The temperature at which the battery protection function activates depends on the device.

Controls

Continued
https://manual-hub.com/

239

uuInterior Convenience ItemsuOther Interior Convenience Items

Canadian models
Heated Steering Wheel*
The heated steering wheel can be used when the power mode is in ON.
Press the button on the lower side of the steering wheel.

1Heated Steering Wheel*
Do not use the heated steering wheel continuously when the power system is off. Under such conditions, the 12-volt battery may be weakened, making the power system difficult to start.

When a comfortable temperature is reached, press the button again to turn it off.

The heated steering wheel is turned off every time you start the power system, even if you turned it on the last time you drove the vehicle.

Controls

240 * Not available on all models

https://manual-hub.com/

uuInterior Convenience ItemsuOther Interior Convenience Items

Front Seat Heaters*

The seat heaters can be used when the power mode is in ON.

1Front Seat Heaters*
3 WARNING
Heat induced burns are possible when using seat heaters.

Press the seat heater button: Once - The HI setting (three indicators on) Twice - The MID setting (two indicators on) Three times - The LO setting (one indicator on) Four times - The OFF setting (no indicators on)

Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lowerlimb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.
Do not use the seat heaters even in LO when the power system is off. Under such conditions, the 12volt battery may be weakened, making the power system difficult to start.

When the power mode is turned on after it is turned off, the previous setting is maintained.

After a certain period of time, the strength setting for the front seat heaters will automatically be reduced by one level at a time until the front seat heaters shuts off. The elapsed time varies according to the interior environment.

Controls

* Not available on all models

Continued
https://manual-hub.com/

241

uuInterior Convenience ItemsuOther Interior Convenience Items

Front Seat Heaters and Seat Ventilation*
The seat heaters or ventilators can be used when the power mode is in ON. The seat heaters: Use them to warm up the seat. The seat ventilators: Use them when you want to ventilate the surface of the seats. The lower you set the air conditioning temperature, the more you will feel the effect of the seat ventilation. Press the seat heater or the seat ventilation button: Once - The HI setting (three indicators on) Twice - The MID setting (two indicators on) Three times - The LO setting (one indicator on) Four times - The OFF setting (no indicators on)
When the power mode is turned on after it is turned off, the previous setting of front seat heaters is maintained.

1Front Seat Heaters and Seat Ventilation*
3 WARNING
Heat induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lowerlimb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.
Do not use the seat heaters and the seat ventilation even in LO when the power system is off. Under such conditions, the 12-volt battery may be weakened, making the power system difficult to start.
After a certain period of time, the strength setting for the front seat heaters will automatically be reduced by one level at a time until the front seat heaters shuts off. The elapsed time varies according to the interior environment.

Controls

242 * Not available on all models

https://manual-hub.com/

uuInterior Convenience ItemsuOther Interior Convenience Items

Rear Seat Heaters*

1Rear Seat Heaters*

The seat heaters can be used when the power mode is in ON.
There is no heater in the rear center seating position.
Press the seat heater button: Once - The HI setting (three indicators on) Twice - The MID setting (two indicators on) Three times - The LO setting (one indicator on) Four times - The OFF setting (no indicators on)

3 WARNING
Heat induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lowerlimb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.
Do not use the seat heaters even in LO when the power system is off. Under such conditions, the 12volt battery may be weakened, making the power system difficult to start.

After a certain period of time, the strength setting for the rear seat heaters will automatically be reduced by one level at a time until the rear seat heaters shuts off. The elapsed time varies according to the interior environment.

Controls

* Not available on all models

https://manual-hub.com/

243

Controls

Climate Control System

Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select. The system also selects the proper mix of heated or cooled air that raises or lowers the interior temperature to your preference as quickly as possible.

1Using Automatic Climate Control
If any buttons are pressed while using the climate control system in auto, the function of the button that was pressed will take priority. The AUTO indicator will go off, but functions unrelated to the button that was pressed will be controlled automatically.

To prevent cold air from blowing in from outside, the fan may not start immediately when the AUTO button is pressed.

If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning the system on auto, and setting the temperature to low. Change the fresh mode to recirculation mode until the temperature cools down.

When you set the temperature to the lower or upper limit, Lo or Hi is displayed.

Pressing the button switches the climate control system between on and off. When turned on, the system returns to your last selection.

While ECON mode is active, the climate control system may have reduced cooling performance.

244

https://manual-hub.com/

uuClimate Control SystemuUsing Automatic Climate Control

Controls

Dashboard vents Dashboard and floor and back of the vents, and back of center console* the center console*

Floor vents

Floor and defroster vents

Driver's Side Temperature Control Dial
(Recirculation) Button
AUTO Button
(Windshield Defroster) Button

Fan Control Dial Passenger's Side Temperature Control Dial
A/C (Air Conditioning) Button
(on/off) Button

Use the system when the power system is on.

1. Press the AUTO button.

2. Adjust the interior temperature using the driver's side or passenger's side control

dial.

3. Press the

(on/off) button to cancel.

Switching between the recirculation and fresh air modes

Press the

(recirculation) button and switch the mode depending on

environmental conditions.

Recirculation mode (indicator on): Recirculates air from the vehicle's interior through

the system.

Fresh air mode (indicator off): Maintains outside ventilation. Keep the system in

fresh air mode in normal situations.

* Not available on all models

Continued
https://manual-hub.com/

245

uuClimate Control SystemuUsing Automatic Climate Control

Defrosting the Windshield and Windows
Pressing the button turns the air conditioning system on and automatically switches the system to fresh air mode.
Press the button again to turn off, the system returns to the previous settings.

1Defrosting the Windshield and Windows For your safety, make sure you have a clear view through all the windows before driving.
Do not set the temperature near the upper or lower limit. When cold air hits the windshield, the outside of the windshield may fog up.

To rapidly defrost the windows 1. Press the 2. Press the

button. button.

1To rapidly defrost the windows
After defrosting the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.

Controls

246

https://manual-hub.com/

Synchronization Mode

uuClimate Control SystemuUsing Automatic Climate Control
1Synchronization Mode When you press the button, the system changes to synchronization mode. When the system is in dual mode, the driver side temperature and the passenger side temperature can be set separately.

Controls

Driver's Side Temperature Control Dial

Passenger's Side Temperature Control Dial

SYNC Button

You can set the temperature synchronously for the driver side and the passenger side in synchronization mode.

1. Press the SYNC button. u The system will switch to the synchronization mode.
2. Adjust the temperature using driver's side temperature control dial.

Press the SYNC button or adjust the interior temperature using the passenger's side temperature control dial to return to dual mode.

https://manual-hub.com/

247

uuClimate Control SystemuAutomatic Climate Control Sensors

Automatic Climate Control Sensors

Sensor

The automatic climate control system is equipped with sensors. Do not cover or spill any liquid on them.

Sensor

Controls

248

https://manual-hub.com/

Features
This chapter describes how to operate technology features.

Audio System .................................... 250 About Your Audio System................ 250 USB Ports ......................................... 251 Audio System Theft Protection ......... 253 Audio Remote Controls.................... 254
Audio System Basic Operation ........ 257 Audio/Information Screen ................ 258 System Updates* ............................. 273 Adjusting the Sound ........................ 279 Display Setup ................................... 280 Voice Control Operation .................. 282 Playing AM/FM Radio ....................... 285
* Not available on all models

Playing SiriusXM® Radio* ................. 289 Playing an iPod ................................ 300 Playing a USB Flash Drive ................. 303 Playing Bluetooth® Audio................. 306 HondaLink® ..................................... 308 HondaLink® Service* ........................ 312 Wi-Fi Connection ............................. 317 AT&T Hotspot* ................................ 318 Siri Eyes Free* .................................. 319 Apple CarPlay .................................. 320 Android Auto................................... 326 Audio Error Messages ...................... 333
https://manual-hub.com/

General Information on the Audio System ............................................. 335
Customized Features........................ 357 HomeLink® Universal Transceiver*.. 378 Bluetooth® HandsFreeLink®............. 381 Refuel Recommend .......................... 407

249

Audio System
About Your Audio System
The audio system features AM/FM radio and SiriusXM® Radio* service. It can also play USB flash drives, iPod, iPhone, and Bluetooth® devices. You can operate the audio system from the buttons and knobs on the panel, the remote controls on the steering wheel, or the icons on the touchscreen interface.
Remote Controls
iPod
USB Flash Drive

1About Your Audio System iPod®, iPhone® and iTunes® are trademarks of Apple Inc.
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
SiriusXM® Radio* is available on a subscription basis only. For more information on SiriusXM® Radio*, contact a dealer.
2 General Information on the Audio System P. 335
SiriusXM® Radio* is available in the United States and Canada, except Hawaii, Alaska, and Puerto Rico.
SiriusXM®* is a registered trademark of SiriusXM Radio*, Inc.

Features

250 * Not available on all models

https://manual-hub.com/

USB Ports
In the center pocket
*1

uuAudio SystemuUSB Ports

In the center pocket ( )

1USB Ports

The USB port(s) (2.5A) is/are for charging

· Do not leave the iPod or USB flash drive in the

devices, playing audio files and connecting

vehicle. Direct sunlight and high temperatures may

compatible phones with Apple CarPlay or Android Auto.
u To prevent any potential issues, be sure to use an Apple MFi Certified Lightning Connector for Apple CarPlay, and for Android Auto, the USB cables should be

damage it.
· We recommend that you use a USB cable if you are
attaching a USB flash drive to the USB port.
· Do not connect the iPod or USB flash drive using a
hub.
· Do not use a device such as a card reader or hard
disk drive, as the device or your files may be

certified by USB-IF to be compliant with

damaged.

USB 2.0 Standard.

· We recommend backing up your data before using

the device in your vehicle.

In the center pocket (

The USB port (2.5A) is only for charging

· Displayed messages may vary depending on the
device model and software version.

devices. u You cannot play music even if you have

USB charge
The USB port can supply up to 2.5A of power. It does

connected music players to it.

not output 2.5A unless the device requests. For amperage details, read the operating manual of

the device that needs to be charged.

Under certain conditions, a device connected to the port may generate noise to the radio station you are listening to.

Features

*1: Models without wireless Apple CarPlay and wireless Android Auto *2: Models with wireless Apple CarPlay and wireless Android Auto
* Not available on all models

Continued
https://manual-hub.com/

251

uuAudio SystemuUSB Ports Rear of the center console*

Rear of the center console* The USB ports (2.5A) are only for charging devices.
u You cannot play music even if you have connected music players to them.

Features

252 * Not available on all models

https://manual-hub.com/

Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead. In certain conditions, the system may display a code entry screen. If this occurs, reactivate the audio system.
Reactivating the audio system 1. Set the power mode to ON. 2. Turn on the audio system. 3. Press and hold the audio system power knob for more than two seconds.
u The audio system is reactivated when the audio control unit establishes a connection with the vehicle control unit. If the control unit fails to recognize the audio unit, you must go to a dealer and have the audio unit checked.

uuAudio SystemuAudio System Theft Protection

Features

https://manual-hub.com/

253

uuAudio SystemuAudio Remote Controls

Audio Remote Controls

Allow you to operate the audio system while driving. The information is shown on

the driver information interface or head-up display*.

(home) Button Left Selector Wheel

VOL(+/VOL(- (Volume) Buttons Press VOL(+: To increase the volume.

Press VOL(-: To decrease the volume.

(back) Button

/ (Seek/Skip)

Buttons

VOL(+/VOL(- (Volume) Buttons

1Audio Remote Controls Some modes appear only when an appropriate device or medium is used.
Depending on the Bluetooth® device you connect, some functions may not be available.
Press the (back) button for the driver information interface to go back to the previous screen or cancel a command.
Press the (home) button to go back to the home screen of the driver information interface.

Left Selector Wheel · When selecting the audio mode
Press the (home) button, then roll up or down to select Audio on the driver information interface, and then press the left selector wheel.

Features

254 * Not available on all models

https://manual-hub.com/

Roll up or down:
To cycle through the audio modes, roll up or down and then press the left selector wheel:
FM
AM SiriusXM®*
USB1 (USB)
USB2*
Bluetooth® Audio
Smartphone Connection (Apple CarPlay/Android Auto)

uuAudio SystemuAudio Remote Controls

Features

* Not available on all models

Continued
https://manual-hub.com/

255

uuAudio SystemuAudio Remote Controls
/ (Seek/Skip) Buttons · When listening to the radio
Press : To select the next preset radio station. Press : To select the previous preset radio station. Press and hold : To select the next strong station. Press and hold : To select the previous strong station. · When listening to an iPod, USB flash drive, or Bluetooth® Audio, or Smartphone Connection Press : To skip to the next song. Press : To go back to the beginning of the current or previous song. · When listening to a USB flash drive Press and hold : To skip to the next folder. Press and hold : To go back to the previous folder.

Features

256

https://manual-hub.com/

Audio System Basic Operation

Features

To use the audio system function, the power mode must be in ACCESSORY or ON.

(Home) Button (Day/Night) Button (Audio) Button (Phone) Button (Clock) Button*/ (Map) Button*

(Home) Button: Press to go to the home screen.
2 Switching the Display P. 258
(Back) Button: Press to go back to the previous display when it is displayed.
/ (Seek/Skip) Buttons: Press to

change songs.

(Clock) Button*: Press to display the clock

screen.

(Map) Button*: Press to display the map

/ (Seek/Skip) Buttons
(Back) Button

SOURCE Button
Selector Knob

screen.
2 Refer to the Navigation System Manual
(Phone) Button: Press to display the phone screen.
(Audio) Button: Press to display the current audio information. SOURCE Button: Press to display the source

select screen.

Selector Knob: Rotate left or right to scroll

through the available choices.

Press to set your selection.

(Day/Night) Button: Press to change

the audio/information screen brightness.

Press

once and select or to make

an adjustment. u Each time you press

, the mode

switches among the daytime mode,

nighttime mode, and off mode.

1Audio System Basic Operation These indications are used to show how to operate the Selector Knob. Rotate to select. Press to enter.
Selector Knob When the list is not displayed, songs, frequency, etc. can be changed.
While connected to Apple CarPlay, it changes as follows:
· Pressing the Phone Button, display the Apple
CarPlay phone screen.
· Pressing the Audio Button, display the Apple
CarPlay audio screen.

* Not available on all models

257

https://manual-hub.com/

uuAudio System Basic OperationuAudio/Information Screen
Audio/Information Screen
Displays the audio status and wallpaper. From this display, you can go to various setup options.
Switching the Display
Using the audio/information screen
Home Screen
(Home) Button

1Audio/Information Screen
Touchscreen Operation
· Use simple gestures - including touching, swiping,
and scrolling - to operate certain audio functions.
· Some items may be grayed out during driving to
reduce the potential for distraction.
· You can select them when the vehicle is stopped or
use voice commands.
· Wearing gloves may limit or prevent touchscreen
response.
You can change the touchscreen sensitivity setting. 2 Customized Features P. 357

All Apps

Features

Press the button to go to the home screen. Select the following icons on the home screen or after selecting All Apps.
Phone Displays the HFL information.
2 Bluetooth® HandsFreeLink® P. 381

258

https://manual-hub.com/

uuAudio System Basic OperationuAudio/Information Screen
Trip Computer Displays the trip computer information. · Current Drive tab: Displays the current trip information. · Trip A/Trip B tab: Displays information for the current and three previous drives.
The information is stored every time you reset Trip A/B. To reset the Trip A/B, select Settings, then select Delete Trip History. To change the setting of how to reset Trip A/B, select Settings, then select "Trip A" Reset Timing or "Trip B" Reset Timing.
Clock Displays the clock.
System Updates* Updates the software version of the audio system.
2 System Updates* P. 273
FM/AM/Sirius XM*/USB1 (USB)/USB2*/Bluetooth Audio Displays information for each audio format.
Settings Enters the customizing menu screen.
2 Customized Features P. 357
Navigation* Displays the navigation screen.
2 Refer to the Navigation System Manual

Features

* Not available on all models

Continued
https://manual-hub.com/

259

uuAudio System Basic OperationuAudio/Information Screen
HondaLink Displays the HondaLink screen.
2 HondaLink® P. 308
Apple CarPlay/Android Auto Displays the Apple CarPlay or Android Auto screen.
2 Apple CarPlay P. 320 2 Android Auto P. 326
Messages Displays the text message screen.
2 Bluetooth® HandsFreeLink® P. 381
AT&T Hotspot* Displays the AT&T Hotspot screen.
2 AT&T Hotspot* P. 318
Compass* Displays the compass screen.

Features

260 * Not available on all models

https://manual-hub.com/

uuAudio System Basic OperationuAudio/Information Screen

Power Flow Displays the motor and engine power flow, average fuel economy, and range.

Engine ON

Engine

Engine OFF

1Audio/Information Screen The power flow monitor is also displayed on the driver information interface. 2 Power Flow Monitor P. 165
While the vehicle is stationary with the engine running, the following may appear on the audio/ information screen.

Features

Average Fuel Economy (Current Drive)

Power Flow High Voltage Battery

Driving Range

The auto engine stop does not activate. (Engine ON)

The auto engine stop activates. (Engine OFF)

Continued
https://manual-hub.com/

261

uuAudio System Basic OperationuAudio/Information Screen

Displays the power flow, indicating what is supplying power to the vehicle and/or charging the battery.
u The indicator for the power transmission appears in blue, and for the battery charging operation, in green.

Display

Color of indicators

Vehicle's Condition

1Audio/Information Screen
While the engine provides propulsion directly to the wheels, the icon appears in the power flow monitor on the screen.

Power is being supplied by

Blue

the High Voltage battery and the engine-driven

generator.

Blue

Power is being supplied by the High Voltage battery.

Power is being supplied by

Blue

the engine-driven

generator.

Features

262

https://manual-hub.com/

uuAudio System Basic OperationuAudio/Information Screen

Display

Color of indicators Vehicle's Condition

Blue and Green

Power is being supplied directly by the engine and the High Voltage battery is being charged by the engine-driven generator.

Green

The High Voltage battery is being charged through regenerative braking.

Green

The High Voltage battery is being charged by the engine-driven generator.

Features

Continued
https://manual-hub.com/

263

uuAudio System Basic OperationuAudio/Information Screen

Wallpaper Setup
You can change, store, and delete the wallpaper on the audio/information screen.

Import wallpaper

1. Connect the USB flash drive to the USB port in the center pocket.
2 USB Ports P. 251
2. Select Clock. 3. Select Settings. 4. Select Clock Faces. 5. Select Add New Wallpaper.
u The Searching... screen is displayed.

6. Import a desired picture. u Multiple pictures can be imported at the same time.
7. Select Start Import. u The display will return to the Clock Faces screen.

1Wallpaper Setup
The wallpaper you set up on Clock Faces cannot be displayed on the driver information interface.
· When importing wallpaper files, the image must be
in the USB flash drive's root directory. Images in a folder cannot be imported.
· The file name must be fewer than 64 bytes. · The file format of the image that can be imported
is BMP (bmp) or JPEG (jpg).
· If the USB flash drive does not have any pictures,
the No files detected message appears.
· Up to five pictures can be imported. · The maximum image size is 1,920 × 936 pixels. If
the image size is less the image is displayed in the middle of the screen with the extra area appearing in black.

Features

264

https://manual-hub.com/

Select wallpaper 1. Select Clock. 2. Select Settings. 3. Select Clock Faces. 4. Select a desired wallpaper. 5. Select Set.
u The display will return to the Clock Faces screen.
To view wallpaper once it is set 1. Press the button. 2. Select Clock.
Delete wallpaper 1. Select Clock. 2. Select Settings. 3. Select Clock Faces. 4. Select a desired wallpaper. 5. Select Delete. 6. Select Yes.
u The display will return to the Clock Faces screen.

uuAudio System Basic OperationuAudio/Information Screen
1Wallpaper Setup You cannot delete the initially imported wallpapers.

Features

Continued
https://manual-hub.com/

265

uuAudio System Basic OperationuAudio/Information Screen

Home Screen
To move to the next screen

Swipe

1Home Screen The home screen has 2 pages. You can add up to 7 pages.
Press the button to go directly back to the first page of the home screen from any page.

> Icon

< Icon Current page position

Selecting < or > , or swiping the screen left or right changes to the next screen.

Features

266

https://manual-hub.com/

uuAudio System Basic OperationuAudio/Information Screen

To add app icons on the home screen App icons can be added on the home screen.
1. Press the button. 2. Select and hold the home screen. 3. Select Add. 4. Drag and drop the icon to where you want
it to be. 5. Select Done.
u The screen will return to the home screen.

1To add app icons on the home screen
You can add app icons by the following procedure. 1. Press the button. 2. Select All Apps. 3. Select Customize. 4. Select Add. 5. Drag and drop the icon to where you want it to
be. 6. Select Done. uThe screen will return to the home screen.
Pre-installed apps may not start up normally. If this occurs, you need to reset the system.
2 Defaulting All the Settings P. 377

If you perform Factory Data Reset, it may reset all the settings to their factory default.
2 Defaulting All the Settings P. 377

In case those apps still do not start up normally even after Factory Data Reset, contact your dealer.

Features

Continued
https://manual-hub.com/

267

uuAudio System Basic OperationuAudio/Information Screen

To move icons on the home screen

You can change location on the home screen.

1. Select and hold an icon.

u The screen switches to the customization

screen.

2. Drag and drop the icon to where you want

it to be.

Select and hold.

3. Select Done. u The screen will return to the home

screen.

1To move icons on the home screen Select Tips to show tips. To hide them, select it again.

Drag and drop.

Features

268

https://manual-hub.com/

uuAudio System Basic OperationuAudio/Information Screen

To remove icons on the home screen

You can delete the icons on the home screen.

1. Select and hold an icon.

u The screen switches to the customization

screen.

2. Drag and drop the icon you want to remove

to the Hide icon.

Select and hold.

u The icon is removed from the home screen.

3. Select Done.

u The screen will return to the home

screen.

1To remove icons on the home screen Apps will not be deleted by deleting the icon on the home screen.
Select Tips to show tips. To hide them, select it again.

Drag and drop to Hide icon.

Features

Continued
https://manual-hub.com/

269

uuAudio System Basic OperationuAudio/Information Screen

To shortcut icons on the home screen

You can store up to three icons on the upper left of the home screen.

1. Select and hold an icon.

u The screen switches to the customization

screen.

2. Drag and drop the icon you want to store to

the upper left of the home screen.

Select and hold.

u The icon is stored as a shortcut. 3. Select Done.

Shortcut Icons

u The screen will return to the home screen.

1To shortcut icons on the home screen Select Tips to show tips. To hide them, select it again.

Drag and drop to preset icon.

Features

270

https://manual-hub.com/

uuAudio System Basic OperationuAudio/Information Screen

Status Area

1. Select the system status icon. u The status area appears.
2. Select an item to see the details. 3. Press the button or select the system
status icon to close the area.

System Status Icon

Status Area

Features

Continued
https://manual-hub.com/

271

uuAudio System Basic OperationuAudio/Information Screen

Customizing the Meter
You can edit, show, or hide the meter contents on the driver information interface. 1. Press the button. 2. Select Settings. 3. Select System. 4. Select Config. of Instrument Panel. 5. Select the content you wish to show or hide. u The checked items are displayed on the driver information interface. 6. Select Done.

1Customizing the Meter
You can store up to three customized configurations. To select or customize a configuration, select Select configuration.

Editing order To change the order of the contents on the driver information interface, first select:
1. Press the button. 2. Select Settings. 3. Select System. 4. Select Config. of Instrument Panel. 5. Select Reorder. 6. Select and hold the contents you want to
move. 7. Drag and drop the contents to where you
want them to be. 8. Select Done.

Features

272

https://manual-hub.com/

uuAudio System Basic OperationuSystem Updates*

System Updates*
The audio system's firmware can be updated with a Wi-Fi connection or with a USB device.

How to Update Wirelessly
Wireless connection mode setup 1. Press the button. 2. Select System Updates. 3. Select Settings. 4. Select Connection Setup. 5. Select Wi-Fi.

1Wireless connection mode setup
If your vehicle has a telematics control unit (TCU), you do not need the wireless connection mode setup.

6. Select Change Mode. 7. Select Network, then Confirm.
u The display returns to the network list. 8. Select an access point from the network list,
then Save. u If the audio system requires a password,
enter a password.

Features

* Not available on all models

Continued
https://manual-hub.com/

273

uuAudio System Basic OperationuSystem Updates*

How to update

When the audio system update is available, the notification is shown on the audio/

information screen. Use the following procedure to update the system.

Notification

1. Press the button. 2. Select System Updates.

1How to update
You can update the system via Wi-Fi, but cannot use the captive portal that require login or agreement the terms of use on the browser.
Your download will be canceled if:
· Your Wi-Fi connection is severed. · You turn off the ignition when the battery is low on
power.

Your download will recommence the next time a WiFi connection is established.

3. Select via Wireless. u If a notification is displayed on the screen, the screen of step 5 will be displayed.
4. Select Download Now. u A notification appears on the screen.

Features

274

https://manual-hub.com/

uuAudio System Basic OperationuSystem Updates*

5. Select Install Now or Install while Vehicle OFF. u A notification appears on the screen if the update is successful.

1How to update
For battery protection, Install while vehicle OFF cannot be selected when the battery is low on power. If you want to install the updated data, recharge the battery or select Install Now.

Features

Continued
https://manual-hub.com/

275

uuAudio System Basic OperationuSystem Updates*
Automatic download settings Use the following procedure to change to the automatic download setting.
1. Press the button. 2. Select System Updates. 3. Select Settings. 4. Select Auto Download. 5. Select the access point, then Yes.
View a version and update status Use the following procedure to confirm the version and update status. 1. Press the button. 2. Select System Updates. 3. Select Settings. 4. Select Version Status.

Features

276

https://manual-hub.com/

uuAudio System Basic OperationuSystem Updates*

How to Update with a USB Device
Download the update files from the server 1. Press the button. 2. Select System Updates. 3. Select via USB. u A notification appears on the screen. 4. Connect a USB device into the USB port in the center pocket. u The inventory data is copied into the USB device.
2 USB Ports P. 251
5. Remove the USB device from the USB port. 6. Connect the USB device into your
computer, and then download the update files. u Follow the link to download the required
software update files. Refer to https://usb.honda.com for instructions.

1How to Update with a USB Device A USB device with a minimum of 8 GB of free space or more is recommended.
Be sure to delete any previous inventory or update files from the USB before starting the USB update process.

Features

Continued
https://manual-hub.com/

277

uuAudio System Basic OperationuSystem Updates*

Update the audio system

1. Press the button. 2. Select System Updates. 3. Select via USB.
u A notification appears on the screen. 4. Connect the USB device with the update
files into the USB port. u A notification appears on the screen.
2 USB Ports P. 251
5. Select Install Now. u A notification appears on the screen if the update is successful.

Features

278

https://manual-hub.com/

uuAudio System Basic OperationuAdjusting the Sound

Adjusting the Sound

1. Press the button. 2. Select an audio source icon. 3. Select Sound. 4. Select the setting you want. 5. Select Save.

Select an item from the following choices: · Bass / Treble: Treble, Midrange, Bass,
Subwoofer* · Balance / Fader: Balance, Fader · DTS Neural Surround*: DTS Neural
SurroundTM · Speed Volume Compensation: Speed
Volume Compensation (SVC)

1Adjusting the Sound The SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.
You can also adjust the sound the following procedure. 1. Press the button. 2. Select Settings. 3. Select Sound.
To reset each setting for Bass / Treble, Balance / Fader, DTS Neural Surround* and Speed Volume Compensation select Default.

Features

* Not available on all models

https://manual-hub.com/

279

uuAudio System Basic OperationuDisplay Setup
Display Setup
You can change the brightness of the audio/information screen.
Changing the Screen Brightness
1. Press the button. 2. Select Settings. 3. Select Display. 4. Select Day Mode or Night Mode. 5. Select the setting you want. 6. Select Save.

1Changing the Screen Brightness You can change the Contrast and Black Level settings in the same manner.
To reset the settings, select Default.

Features

280

https://manual-hub.com/

Selecting an Audio Source
Select the source icon

Source Select Screen

uuAudio System Basic OperationuDisplay Setup

SOURCE Button

Source List Icons

Select the current source icon, then select an icon on the source list or use the SOURCE button to switch the audio source.

Limitations for Manual Operation*
Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped.

Features

* Not available on all models

https://manual-hub.com/

281

uuAudio System Basic OperationuVoice Control Operation

Voice Control Operation
Your vehicle has a voice control system that allows hands-free operation. The voice control system uses the (talk) and (back) buttons on the steering wheel and a microphone near the map lights on the ceiling.
Voice Recognition
To achieve optimum voice recognition when using the voice control system: · Make sure the correct screen is displayed for the voice command that you are
using. The system recognizes only certain commands. Available voice commands:
2 Voice Portal Screen P. 283
· Close the windows and moonroof*. · Adjust the dashboard and side vents so air does not blow onto the microphone
on the ceiling. · Speak clearly in a clear, natural speaking voice without pausing between words. · Reduce any background noise if possible. The system may misinterpret your
command if more than one person is speaking at the same time.

1Voice Control Operation
When you press the button, a helpful prompt asks what you would like to do. Press and release the button again to bypass this prompt and give a command.

Features

282 * Not available on all models

https://manual-hub.com/

uuAudio System Basic OperationuVoice Control Operation

Voice Portal Screen
When the (talk) button is pressed, available voice commands appear on the screen. For a complete list of commands, say "Voice Help" after the beep. The system only recognizes the commands on the following pages, at certain screens. Free-form voice commands are not recognized.

Phone Commands
These commands can only be used when a phone is connected. When the system recognizes a phone command, the screen will change to the dedicated phone voice recognition screen. · Phone · Call <Your Contact Name> · Call <Phone Number> The system only recognizes contact names stored in the phonebook of your phone. If a full name is registered in the first name field, the system will recognize the first name and last name as one contact name.
Phone commands are not available if using Apple CarPlay.
Audio Commands
When the system recognizes an audio command, the screen will change to the dedicated audio voice recognition screen.

FM Commands · FM · Tune to <87.7-107.9> FM
AM Commands · AM · Tune to <530-1710> AM
Sirius XM Commands* · Sirius XM · Channel <1-999> · Channel <station name>
USB Commands · USB · Play Genre <Genre name> · Play Artist <Artist name> · Play Album <Album name> · Play Playlist <Playlist name> · Play Song <Song name> · Play Music · List Genre <Genre name> · List Artist <Artist name> · List Album <Album name> · List Playlist <Playlist name>

Features

* Not available on all models

https://manual-hub.com/

Continued 283

uuAudio System Basic OperationuVoice Control Operation
Navigation Commands*1
The system will accept navigation voice commands when on the dedicated voice command screen for navigation.
2 Refer to the Navigation System Manual
Standard Commands
· Voice Help · Cancel · Back Voice Help provides guidance for the current screen.

Features

*1: Models with navigation system
284

https://manual-hub.com/

Playing AM/FM Radio

(Back) Button
Press to go back to the previous display.

Seek Buttons

Press

to search up and

down the selected band for a

station with a strong signal.

VOL/ AUDIO (Volume/Power) Knob Push to turn the audio system on and off. Turn to adjust the volume.

* Not available on all models

uuAudio System Basic OperationuPlaying AM/FM Radio

Audio/Information Screen
Settings Icon Select whether to tune to HD RadioTM* automatically.

Features

Preset Icons Tune the radio frequency for preset memory.Select and hold the preset icon to store that station. Select > to display beyond preset 5.
Selector Knob Turn to tune the radio frequency. Press, and then turn to select an item. After that, press again to make your selection. Scan Icon Select to scan each station with a strong signal. Tune Icon Select to use the on-screen keyboard for entering the radio frequency directly.

https://manual-hub.com/

Continued 285

uuAudio System Basic OperationuPlaying AM/FM Radio
Preset Memory
To store a station: 1. Tune to the selected station. 2. Select and hold the preset icon for the station you want to store.
Station List
Lists the strongest stations on the selected band. 1. Select Station List to display a list. 2. Select the station.
Manual update Updates your available station list at any time. 1. Select Station List to display a list. 2. Select Refresh.

1Preset Memory The ST indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available.
Switching the Audio Mode Roll the left selector wheel or select the audio source icon on the screen.
2 Audio Remote Controls P. 254
You can store 12 AM/FM stations into preset memory.
Models with HD RadioTM feature
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD RadioTM and the HD, HD Radio, and "Arc" logos are proprietary trademarks of iBiquity Digital Corp.

Features

286

https://manual-hub.com/

uuAudio System Basic OperationuPlaying AM/FM Radio

Scan
Samples each of the strongest stations on the selected band for 10 seconds. To turn off scan, select Stop or .

Radio Data System (RDS)
Provides text data information related to your selected RDS-capable FM station.
To find an RDS station from Station List 1. Select Station List to display a list while listening to an FM station. 2. Select the station.

1Radio Data System (RDS)
When you select an RDS-capable FM station, the RDS automatically turns on, and the frequency display changes to the station name. However, when the signals of that station become weak, the display changes from the station name to the frequency.

Manual update Updates your available station list at any time. 1. Select Station List to display a list while listening to an FM station. 2. Select Refresh.

Features

Continued
https://manual-hub.com/

287

uuAudio System Basic OperationuPlaying AM/FM Radio
Models with HD RadioTM feature
HD Subchannel
Displays the subchannel list when an HD RadioTM station is selected while listening to an FM station. 1. Select HD Radio Channels. 2. Select the channel number.
AM/FM Settings
Change the AM/FM settings. 1. Select Settings. 2. Select an option.
· HD Radio: Automatically choose a digital or an analog channel, or listen to analog only.
· Artwork: Turns the artwork display on and off.

Features

288

https://manual-hub.com/

Playing SiriusXM® Radio*

Album Art

(Back) Button
Press to go back to the previous display.

Seek Buttons

Press

to search up and

down the selected band for a

station with a strong signal.

VOL/ AUDIO (Volume/Power) Knob Push to turn the audio system on and off. Turn to adjust the volume.

* Not available on all models

uuAudio System Basic OperationuPlaying SiriusXM® Radio*

Audio/Information Screen
Settings Icon Select settings to display and customize SiriusXM® settings.

Features

Preset Icons
Tune the radio frequency for preset memory. Select and hold the preset icon to store that station. Select > to display beyond preset 5.

Selector Knob Turn to change the channel. Press, and then turn to select an item. After that, press again to make your selection.
Category Icons Select or to display and select a SiriusXM® Radio category.
Channel Icons Select or to the previous or next channel. Select and hold to rapidly skip 10 channels at a time.

https://manual-hub.com/

Continued 289

uuAudio System Basic OperationuPlaying SiriusXM® Radio*
To Change the Tune Mode
1. Select Settings. 2. Select Tune Mode. 3. Select Channel or Category.

Features

290 * Not available on all models

https://manual-hub.com/

1Playing SiriusXM® Radio* In the channel mode, all available channels are selectable. In the category mode, you can select a channel within a category (Jazz, Rock, Classical, etc.).
There may be instances when SiriusXM® Radio does not broadcast all the data fields (artist name, title). This does not indicate a problem with your audio system.
SiriusXM® Radio stations load in ascending order, which can take about a minute. Once they have loaded you will be able to scroll up or down to make your selections.
Switching the Audio Mode Roll up or down to select Audio on the left selector wheel or select the audio source icon on the screen.
2 Audio Remote Controls P. 254
Tune Start: When you change to a preset channel, a song being played on that channel restarts from the beginning with this function. This can be turned on or off by the following procedure. 1. Select Settings. 2. Select Tune Start. 3. Select ON or OFF.
To change a category, select Category icons, or select More and then select Category List.

uuAudio System Basic OperationuPlaying SiriusXM® Radio*

Preset Memory
To store a channel: 1. Tune to the selected channel. 2. Select and hold the preset number for the station you want to store.
Multi-channel preset (for music channels only) You can store up to 10 of your preferred music channels per preset.
1. Tune a station. 2. Select and hold the preset number you
want to add a music channel. 3. Select Add to TuneMix or Create
TuneMix. u A message appears if there are no
available presets.

1Preset Memory You can store 12 SiriusXM® channels into the preset memory.
1Multi-channel preset (for music channels only) TuneMix: The multi-channel preset function can be turned on or off by the following procedure. 1. Select Settings. 2. Select TuneMix. 3. Select ON or OFF.
When you want to replace the channel, select Replace Preset. If you want to delete a channel, select Edit TuneMix, and then select the channel you want to delete.

Features

Continued
https://manual-hub.com/

291

uuAudio System Basic OperationuPlaying SiriusXM® Radio*

Listening to Featured Channels
Suggested channel listing received from SiriusXM® can be displayed and selected. 1. Select Channel List. 2. Select Featured Favorite.

1Listening to Featured Channels Up to ten featured channels by SiriusXM® can be displayed.
Featured channel lists are at the top of the channel list.
To switch the sorting method, select Number or Name on the upper right of the screen.
Select Keypad to use the on-screen keyboard for entering the channel number directly.

Features

292

https://manual-hub.com/

uuAudio System Basic OperationuPlaying SiriusXM® Radio*

Replay Function
The system can record up to the last 60 minutes broadcast of your currently tuned channel as well as the last 30 minutes broadcast of preset channels, starting from the moment you turn the vehicle on. If you tuned to preset channel, the system records up to 60 minutes of a broadcast instead of up to 30 minutes. You can rewind and replay the last 30 or 60 minutes of a broadcast.

Move the position you want to replay by selecting

or .

To play or pause on playback mode, select the play/pause icon.
Returning to real-time broadcast Select and hold .

1Replay Function The system starts storing broadcast in memory when the power mode is turned ON. You can go back to the program from that point.
You can no longer replay any program once the power mode is turned off as it erases memory. You can check how long the program has been stored in memory from the audio/information screen.
After 30 or 60 minutes of recording the system will automatically start deleting the oldest data.
Audio/Information Screen (A)

Features

(C) (D) (B)
(A): Shows how much time the replayed segment is behind the real-time broadcast (B): Replayed segment (C): Length stored in memory (D): Play/Pause icon

Continued
https://manual-hub.com/

293

uuAudio System Basic OperationuPlaying SiriusXM® Radio*

Live Sports Alert
While listening to other channel, you can receive sports alerts such as scores from your favorite teams.

To set up a favorite team

1. Select Settings. 2. Select Sports Notifications Setup. 3. Select Favorite Teams. 4. Select + Add Favorite Team. 5. Select a team.

1Live Sports Alert The Pop-up appears and notifies you of a sports alert function.
1To set up a favorite team Sports alerts cut in only when SiriusXM® mode is on.

To set up an alert message 1. Select Settings. 2. Select Sports Notifications Setup. 3. Select Notifications. 4. Select Game Notifications or SportsFlash Game Play Notifications. 5. Select Notifications. 6. Select ON. 7. Select a favorite team.

Features

294

https://manual-hub.com/

Traffic and Weather Information
You can receive traffic and weather information. 1. Select Settings. 2. Select Traffic & Weather Now Setup. 3. Select Selected City. 4. Select the region.

uuAudio System Basic OperationuPlaying SiriusXM® Radio*
1Traffic and Weather Information When traffic and weather information is received, a notification is displayed in the header area. 2 Status Area P. 271

Features

Continued
https://manual-hub.com/

295

uuAudio System Basic OperationuPlaying SiriusXM® Radio*

Channel Schedule
You can view a channel schedule or receive an alert when your favorite program is about to start.

To view a channel schedule

1. Select More. 2. Select Channel Schedule.

1Channel Schedule
Select Keypad to use the on-screen keyboard for entering the channel number directly.

Features

To set up an alert message 1. Select More. 2. Select Channel Schedule. 3. Select a program. 4. Select Set Program Alert. 5. Select Just Once or Every Time.
296

1To set up an alert message The Pop-up appears and notifies you of an alert function. Selecting Just Once disables the alert feature next time you turn the power mode to ON. If you want to delete the alert, select Remove Alert. To enable an alert message, change settings for the alert function. 2 To enable the alert function P. 297
https://manual-hub.com/

uuAudio System Basic OperationuPlaying SiriusXM® Radio*

Manage Program Alert
You can change settings for the alert function.

To enable the alert function

1. Select Settings. 2. Select Manage Program Alerts. 3. Select Notifications. 4. Select ON or OFF.

To remove an alert

1. Select Settings. 2. Select Manage Program Alerts. 3. Select Alerts Set. 4. Select on the alert you want to delete.
u A confirmation message appears on the screen. Select Yes.

Features

Continued
https://manual-hub.com/

297

uuAudio System Basic OperationuPlaying SiriusXM® Radio*
Scan
Sample each channel on the selected mode for 10 seconds. 1. Select More. 2. Select Scan.
You can change a scan mode by the following procedure. 1. Select Settings. 2. Select Scan Mode. 3. Select Channel or Preset.
To turn off scan, select Stop.

1Scan The "Scan Songs in Presets" function is based on TuneScanTM technology of SiriusXM®.
The "Featured Channels" function is based on Featured FavoritesTM technology of SiriusXM®.
TuneScanTM and Featured FavoritesTM are registered trademarks of SiriusXM® Radio, Inc.

Features

298

https://manual-hub.com/

uuAudio System Basic OperationuPlaying SiriusXM® Radio*
SiriusXM® Settings
Change the SiriusXM® settings. 1. Select Settings. 2. Select an option.
· TuneMix: Turns multiple channel mix preset on and off. · Tune Mode: Choose whether to group by category or channel number when
changing channels. · Scan Mode: Select the scan mode from all channels or presets. · Tune Start: Start the currently playing song at the beginning when you switch to
a music channel preset. · Sports Notifications Setup: Set to receive sports alerts such as scores from your
favorite teams.
2 Live Sports Alert P. 294
· Traffic & Weather Now Setup: Set to receive traffic and weather information.
2 Traffic and Weather Information P. 295
· Manage Program Alerts: Change settings for the alert function.
2 Manage Program Alert P. 297

Features

https://manual-hub.com/

299

uuAudio System Basic OperationuPlaying an iPod
Playing an iPod
Using your USB connector, connect the iPod to the USB ports, then select the USB mode.
2 USB Ports P. 251

Cover Art

Audio/Information Screen

Features

(Back) Button
Press to go back to the previous display.

Track Buttons

Press

to change songs.

Select and hold to move rapidly within a song.

VOL/ AUDIO (Volume/Power) Knob

Push to turn the audio system on and off.

Turn to adjust the volume.

Browse Icon Select to display the menu items.

Track Icons

Select

to change songs.

Select and hold to move rapidly within a song.

300

https://manual-hub.com/

Sound Icon Select to display the sound settings.
Selector Knob Turn to change songs. Press, and then turn to select an item. After that, press again to make your selection.
Shuffle Icon Select to play all files in the current category in random order. Repeat Icon Select to repeat the current file. Play/Pause Icon

uuAudio System Basic OperationuPlaying an iPod

How to Select a Song from the Music Search List
1. Select Browse. 2. Select a search category (e.g., Artists,
Albums, etc.). 3. Continue making selections until you find
the song of your choice.

1Playing an iPod Available operating functions vary on models or versions. Some functions may not be available on the vehicle's audio system.
If there is a problem, you may see an error message on the audio/information screen.
2 iPod/USB Flash Drive P. 333
If you operate the music app on your iPhone/iPod while the phone is connected to the audio system, you may no longer be able to operate the same app on the audio/information screen. Reconnect the device if necessary.
If an iPhone is connected via Apple CarPlay, the iPod/ USB source will be unavailable and audio files on the phone will be playable only within Apple CarPlay.

Features

Continued
https://manual-hub.com/

301

uuAudio System Basic OperationuPlaying an iPod

How to Select a Play Mode
You can select shuffle and repeat modes when playing a file.
Shuffle/Repeat Repeatedly select the shuffle or repeat icon until you find a play mode option of your preference.
Repeat Icon Shuffle Icon
To turn off a play mode Select the mode you want to turn off.

1How to Select a Play Mode
Play Mode Menu Items Shuffle
Shuffle off: Shuffle mode to off. Shuffle All Songs: Plays all available songs in a selected list in random order.
Repeat Repeat off: Repeat mode to off. Repeat Song: Repeats the current song. Repeat all: Repeats all available songs in a
selected list.

Features

302

https://manual-hub.com/

uuAudio System Basic OperationuPlaying a USB Flash Drive
Playing a USB Flash Drive
Your audio system reads and plays audio files on a USB flash drive in either MP3, WMA, AAC*1, FLAC or WAV format. Connect your USB flash drive to the USB ports, then select the USB mode.
2 USB Ports P. 251
Audio/Information Screen

Features

(Back) Button
Press to go back to the previous display.

Seek Buttons

Press

to change files.

Select and hold to move rapidly within a track.

VOL/ AUDIO (Volume/Power) Knob

Push to turn the audio system on and off.

Turn to adjust the volume.

Browse Icon Select to display the menu items.

Track Icons

Select

to change files.

Select and hold to move rapidly within a track.

*1:Only AAC format files recorded with iTunes are playable on this unit.

https://manual-hub.com/

Sound Icon Select to display the sound settings.
Selector Knob Turn to change files. Press and turn to select an item, then press to set your selection.
Random Icon Select to play all files in the current category in random order. Repeat Icon Select to repeat the current file. Play/Pause Icon
Continued 303

uuAudio System Basic OperationuPlaying a USB Flash Drive

How to Select a File from the Music Search List
1. Select Browse. 2. Select a search category (e.g., Artists,
Albums, etc.). 3. Continue making selections until you find
the song of your choice.

1Playing a USB Flash Drive Use the recommended USB flash drives. 2 General Information on the Audio System P. 335
WMA files protected by digital rights management (DRM) cannot be played. The audio system displays The selected file cannot be played, then skips to the next file.
If there is a problem, you may see an error message on the audio/information screen.
2 iPod/USB Flash Drive P. 333

Features

304

https://manual-hub.com/

uuAudio System Basic OperationuPlaying a USB Flash Drive

How to Select a Play Mode
You can select repeat and random modes when playing a file.
Random/Repeat Select random or repeat icon repeatedly until a desired mode.

1How to Select a Play Mode
Play Mode Menu Items Random
Random off: Random mode to off. Random All Tracks: Plays all files in random order. Random in Folder: Plays all files in the current folder in random order.

Repeat Icon Random Icon

Repeat Repeat off: Repeat mode to off. Repeat track: Repeats the current playing file. Repeat in Folder: Repeats all files in the
current folder.

To turn off a play mode Select the mode you want to turn off.

Features

https://manual-hub.com/

305

uuAudio System Basic OperationuPlaying Bluetooth® Audio

Playing Bluetooth® Audio
Your audio system allows you to listen to music from your Bluetooth-compatible phone. This function is available when the phone is paired and connected to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
Audio/Information Screen Bluetooth Indicator Appears when your phone is connected to HFL.

Features

(Back) Button Press to go back to the previous display.
VOL/ AUDIO (Volume/ Power) Knob Push to turn the audio system on and off. Turn to adjust the volume.
Browse Icon Select to display the menu items.
306

Selector Knob
Turn to change groups. Press, and then turn to select an item. After that, press again to make your selection.

Play/Pause Icon

Track Icons

Select

to change tracks.

https://manual-hub.com/

1Playing Bluetooth® Audio
Not all Bluetooth-enabled phones with streaming audio capabilities are compatible with the system. For a list of compatible phones:
· U.S.: Visit automobiles.honda.com/handsfreelink/,
or call 1-888-528-7876.
· Canada: For more information on smartphone
compatibility, call 1-855-490-7351.
It may be illegal to perform some data device functions while driving.
Only one phone can be used with HFL at a time. When there is more than one paired phone in the vehicle, the first paired phone the system finds is automatically connected.
The connected phone for Bluetooth® Audio can be different.
If more than one phone is paired to the HFL system, there may be a delay before the system begins to play.
In some cases, the name of the artist, album, or track may not appear correctly.
Some functions may not be available on some devices.
If a phone is currently connected via Apple CarPlay or Android Auto, Bluetooth® Audio from that phone will be unavailable. However, you can have a second previously paired phone stream Bluetooth® Audio by selecting from the Bluetooth® device list.
2 Phone Setup P. 386

uuAudio System Basic OperationuPlaying Bluetooth® Audio

To Play Bluetooth® Audio Files
1. Make sure that your phone is paired and connected to the system.
2 Phone Setup P. 386
2. Select the Bluetooth® Audio mode.

To play or pause a file Select the play/pause icon.
Searching for Music

If the phone is not recognized, another HFLcompatible phone, which is not compatible for Bluetooth® Audio, may already be connected.
1. Select Browse. 2. Select a search category (e.g., Albums). 3. Select an item.
u The selection begins playing.

1To Play Bluetooth® Audio Files To play the audio files, you may need to operate your phone. If so, follow the phone maker's operating instructions.
Switching to another mode pauses the music playing from your phone.
You can change the connected phone by selecting Change Device.
2 Phone Setup P. 386
1Searching for Music Depending on the Bluetooth® device you connect, some or all of the lists may not be displayed.

Features

https://manual-hub.com/

307

uuAudio System Basic OperationuHondaLink®

HondaLink®
HondaLink® connects you to the latest information from Honda. You can connect your phone wirelessly through Wi-Fi or Bluetooth®.
2 Wi-Fi Connection P. 317 2 Phone Setup P. 386
To Connect to HondaLink®
Use the following procedure to connect to HondaLink®.
To enable the HondaLink® service You must consent to location sharing to enable the HondaLink® service.
Disable: Does not allow this consent. Enable Once: Allows only one time. (Shows again next time.) Always Enable: Allows anytime. (Never show again.)

1HondaLink® If your vehicle has a telematics control unit (TCU), you can use HondaLink® without connecting the phone.
The HondaLink® connect app is compatible with most iPhone and Android phones.
If the system is connected to the HondaLink® connect app through Bluetooth® and another Bluetooth® audio device is connected, the Bluetooth® connection to the HondaLink® connect app will be severed.
Some cell phone carriers charge for tethering and smartphone data use. Check your phone's data subscription package.

Features

308

https://manual-hub.com/

To link with HondaLink®

You may see the connection guide screen after launching HondaLink® when there is no connection available.

uuAudio System Basic OperationuHondaLink®

HondaLink® Menu

Features

Connect Displays instruction messages when the vehicle needs service.
Help & Support Displays tips for vehicle usage, and get support via roadside or customer service center.
Continued
https://manual-hub.com/

309

uuAudio System Basic OperationuHondaLink®
Message Displays helpful and important information from Honda.
Vehicle Information and Message from Honda Tips
You can check the messages that are received quickly in the shortcut operation. 1. A notification appears and notifies you of a new message in the header area.

Notification

2. A notification is continuously displayed in the header area until the new message is read.

Features

310

https://manual-hub.com/

uuAudio System Basic OperationuHondaLink®

3. Select the system status icon to see the messages.

1Vehicle Information and Message from Honda Tips
When you update HondaLink®, you must keep the engine running and maintain a constant connection with HondaLink®. If the update is interrupted, the system will automatically resume the process. If, however, a week has elapsed since the process was first interrupted, you must repeat the process from the beginning.

4. Select a new message to open. u If you have selected the update option for HondaLink®, follow the directions on the screen to complete the process.

You can update HondaLink® by selecting Message from Honda on the HondaLink® menu.

Features

https://manual-hub.com/

311

uuAudio System Basic OperationuHondaLink® Service*

HondaLink® Service*
Is a subscription-based service that provides convenient features such as voice communication in case of emergency, online security, and one-on-one operator assistance.

1HondaLink® Service*
HondaLink® also provides services you can operate from the Internet or your smartphone.

In Case of Emergency
Automatic collision notification If your vehicle's airbags deploy or if the unit detects that the vehicle is severely impacted, your vehicle automatically will attempt to connect to the HondaLink® operator. If connected, information about your vehicle, its location, and its condition can be sent to the operator*1; you also can speak to the operator when connected.
IMPORTANT: In a crash, HondaLink® will attempt to notify emergency services but NEITHER HONDA NOR ITS SERVICE PROVIDERS GUARANTEE THAT SUCH NOTIFICATION WILL OCCUR.
Honda reserves the right to terminate HondaLink® services at any time or for any reason, and in the future may not be able to provide services due to changes in, or obsolescence of, technology integral to the service or changes in governmental regulation.
*1: Depending on your phone and adequate cellular coverage, your vehicle's location may not be sent to the operator.

To subscribe to HondaLink®, or to get more information about all of its features, contact a Honda dealer, or visit hondalink.honda.com
1In Case of Emergency Your vehicle may not be able to connect to the operator if the battery level is low, the line is disconnected, or you do not have adequate cellular coverage.
You cannot use this emergency services when:
· You travel outside the HondaLink® service coverage
areas.
· There is a problem with the connecting devices,
such as the microphones, speakers, or the unit itself.
You cannot operate other phone-related functions using the screen while talking to the operator. Only the operator can terminate the connection to your vehicle.
1Automatic collision notification If the unit fails to connect to the operator, it repeatedly tries until it succeeds.

Features

312 * Not available on all models

https://manual-hub.com/

uuAudio System Basic OperationuHondaLink® Service*

Manual operator connection
ASSIST Button

If you need to talk to the HondaLink® operator in a situation where no airbag has deployed, you can manually connect to them by pressing the ASSIST button with the power mode in ACCESSORY or ON. 1. Open the cover attached to the ceiling
console. 2. Press the ASSIST button.
u You are connected to the HondaLink® operator.

1Manual operator connection Do not press the button while driving. When you need to contact the operator, park the vehicle in a safe place.
If the unit fails to connect to the operator, it automatically cancels the action after three minutes.
If necessary, the cover can be broken to access the ASSIST button.

Features

Continued
https://manual-hub.com/

313

uuAudio System Basic OperationuHondaLink® Service*

Security Features
Your subscribed telematics service provider can track your vehicle's location, remotely lock or unlock doors, and help you find your vehicle. To use these features, you need your user ID and personal identification number (PIN).
Stolen vehicle tracking This feature searches and tracks down your vehicle position even if it is on the move.If you believe that your vehicle has been stolen, contact the police as well as the provider.

1Security Features
The contact information of your provider, your user ID and PIN will be given when you subscribe to HondaLink®. If you forget any of the above, contact a Honda dealer, or go to hondalink.honda.com.
You can also activate the remote door lock/unlock and vehicle finder features from the Internet or using your smartphone app. Ask a dealer, or visit hondalink.honda.com.

Remote door lock/unlock The provider can remotely lock or unlock doors upon your request.

Vehicle finder This feature is convenient to use when trying to locate your vehicle in large areas, such as a crowded parking lot. If you cannot locate your vehicle after using the remote transmitter's answerback function, you can contact the provider which can then flash your vehicle's exterior lights and sound the horn, and sends vehicle location via web/Smartphone.
Security alarm notification If the security system in your vehicle detects an abnormal condition, such as someone tampering with the lock on your vehicle, the provider notifies you by email.

1Vehicle finder
The lights will stop flashing and horn will stop sounding under the following:
· When conditions 30 seconds have elapsed. · You unlock the doors using the remote transmitter. · You unlock the doors using the keyless access
system.
· You unlock the doors using the built-in key. · The power mode is set to ACCESSORY or ON.

Features

314

https://manual-hub.com/

uuAudio System Basic OperationuHondaLink® Service*

Operator Assistance

Connect to the HondaLink® operator when trying to find a destination or for

roadside assistance.

1. Press the LINK button.

LINK Button

u Connection to the operator begins. 2. Talk to the operator.

u To disconnect, select Hang Up on the

audio/information screen or press the

button on the steering wheel.

1Operator Assistance Remain attentive to road conditions and driving during operator assistance.
If you want to add or renew a subscription, call the Operator Assistance. 1. Press the button. 2. Select HondaLink. 3. Select HondaLink Subscription Status.

Features

Audio/information screen when connected to the HondaLink® operator.

Continued
https://manual-hub.com/

315

uuAudio System Basic OperationuHondaLink® Service*

Convenient Features
Your subscribed telematics service provider can check your vehicle's condition.
Virtual Dashboard You can remotely check the mileage, fuel range, and oil life in your app.

1Convenient Features
The contact information of your provider, your user ID and PIN will be given when you subscribe to HondaLink®. If you forget any of the above, contact a Honda dealer, or go to hondalink.honda.com.

Remote start and stop the engine You can remotely start and stop engine using your app as same as the keyless remote.

Geofence Alert You can receive a notification anytime your vehicle enters or leaves a region set by you.

Speed Alert You can receive a notification when your vehicle has exceeded a speed limit set by you.

Personal Data Wipe You can reset your audio and navigation system settings to factory defaults with the app.

Wi-Fi hotspot Vehicle provides 4G LTE network environment as Wi-Fi router to use tablet or smartphone in your vehicle.

Features

316

https://manual-hub.com/

uuAudio System Basic OperationuWi-Fi Connection

Wi-Fi Connection

This vehicle is equipped with Wi-Fi connectivity. You can connect to an external WiFi hotspot or communication device.

1Wi-Fi Connection
Wi-Fi and Wi-Fi Direct are registered trademarks of Wi-Fi Alliance®.

Connect the Vehicle to a Wi-Fi Hotspot
1. Press the button. 2. Select Settings. 3. Select Connections. 4. Select Wi-Fi. 5. Select Change Mode. 6. Select Network or Hotspot, then
Confirm. u To change the Wi-Fi settings, select
Options or Setup. u Select the access point you want to
connect to the system.
7. Select Connect. u Enter a password for the access point, and select Done. u When the connection is successful, the icon is displayed on the list.
8. Press the button to go back to the home screen.

1Connect the Vehicle to a Wi-Fi Hotspot You cannot go through the setting procedure while the vehicle is moving. Park in a safe place to set the audio system in Wi-Fi mode.
Some cell phone carriers charge for tethering and smartphone data use. Check your phone's data subscription package.
Check your phone manual to find out if the phone has Wi-Fi connectivity.
You can confirm whether Wi-Fi connection is on or off with the icon on the Wi-Fi network list. Transmission speed and others will not be displayed on this screen.
In case of Wi-Fi connection with your phone, make sure your phone's Wi-Fi setting is in access point (tethering) mode.

Features

https://manual-hub.com/

317

uuAudio System Basic OperationuAT&T Hotspot*

AT&T Hotspot*
If you have subscribed to AT&T hotspot services, your vehicle will provide data to connect your mobile devices to the Internet. You can use the AT&T Hotspot app to turn on/off vehicle data and monitor data usage left on your subscription.
AT&T Hotspot Menu

1AT&T Hotspot* To use AT&T Hotspot services, your vehicle must be subscribed to a data plan. If your vehicle is not subscribed to a data plan, you can visit www.att.com/ honda to add vehicle data services.
Hotspot username and password can be changed in the Settings of the AT&T Hotspot app. Settings cannot be accessed while driving. Park in a safe place to adjust Hotspot settings.

Alternatively, you can use your mobile hotspot to connect the vehicle and other mobile devices to the Internet.
2 Wi-Fi Connection P. 317

Features

a Hotspot Enable Turn on/off AT&T Hotspot. b Data Usage Bar Check the current status of your data plan. This Usage Bar will show your current plan and how much data remains on your plan. Subscription plans for AT&T Hotspot can be added/modified at www.att.com/honda. c Plan Info Shows your current AT&T subscription plan for the vehicle. d Settings Shows the current username and password for vehicle Hotspot. Settings can be changed while the vehicle is not in motion. e Help

318 * Not available on all models

https://manual-hub.com/

uuAudio System Basic OperationuSiri Eyes Free*

Siri Eyes Free*
You can talk to Siri by pressing and holding the (Talk) button on the steering wheel when your iPhone is paired to the Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386

1Siri Eyes Free* Siri is a trademark of Apple Inc.
Check Apple Inc. website for features available for Siri.
While driving we recommend only using Siri through the button on the steering wheel (Siri Eyes Free).

Using Siri Eyes Free
(Back) Button Press to deactivate Siri.

1Using Siri Eyes Free Some commands only work with specific phone features or apps.
Appears when Siri is activated in Siri Eyes Free

Features

(Talk) Button
Press and hold until the display changes as shown.

While in Siri Eyes Free:
The display remains the same. No feedback or commands appear.

* Not available on all models

https://manual-hub.com/

319

uuAudio System Basic OperationuApple CarPlay

Apple CarPlay
If you connect an Apple CarPlay-compatible iPhone to the system via the USB port or wirelessly*, you can use the audio/information screen, instead of the iPhone display, to make a phone call, listen to music, view maps (navigation), and access messages.
2 USB Ports P. 251

Apple CarPlay Menu

Home screen

Apple CarPlay menu screen

Features

Apple CarPlay icon

Select the Honda icon to go back to the home screen
: Go back to the Apple CarPlay Dashboard screen : Go back to the Apple CarPlay menu screen

Phone Access the contact list, make phone calls, or listen to voicemail.

Messages Check and reply to text messages, or have messages read to you.

Music Play music stored on your iPhone.
320 * Not available on all models

https://manual-hub.com/

1Apple CarPlay Only iPhone 5 or newer versions with iOS 8.4 or later are compatible with Apple CarPlay.
We recommend using the latest OS.
Park in a safe place before connecting your iPhone to Apple CarPlay and when launching any compatible apps.
While connected to Apple CarPlay, calls are only made through Apple CarPlay. If you want to make a call with HandsFreeLink®, turn Apple CarPlay OFF.
2 Setting Up Apple CarPlay P. 322
When your iPhone is connected to Apple CarPlay, it is not possible to use the Bluetooth® Audio or Bluetooth® HandsFreeLink®. However, other previously paired phones can stream audio via Bluetooth® while Apple CarPlay is connected.
2 Phone Setup P. 386
Apple CarPlay and Android Auto cannot run at the same time.
For details on countries and regions where Apple CarPlay is available, as well as information pertaining to function, refer to the Apple homepage.

uuAudio System Basic OperationuApple CarPlay

Maps Display Apple Maps and use the navigation function just as you would on your iPhone.
Models with navigation system
Only one navigation system (pre-installed navigation or Apple CarPlay) can give directions at a time. When you are using one system, directions to any prior destination set on the other system will be canceled, and the system you are currently using will direct you to your destination.

1Apple CarPlay
Apple CarPlay Operating Requirements & Limitations Apple CarPlay requires a compatible iPhone with an active cellular connection and data plan. Your carrier's rate plans will apply.
Changes in operating systems, hardware, software, and other technology integral to providing Apple CarPlay functionality, as well as new or revised governmental regulations, may result in a decrease or cessation of Apple CarPlay functionality and services. Honda cannot and does not provide any warranty or guarantee of future Apple CarPlay performance or functionality.
It is possible to use 3rd party apps if they are compatible with Apple CarPlay. Refer to the Apple homepage for information on compatible apps.

Features

Continued
https://manual-hub.com/

321

uuAudio System Basic OperationuApple CarPlay

Features

Setting Up Apple CarPlay
After you have connected your iPhone to the system via the USB port or wirelessly*, use the following procedure to set up Apple CarPlay. Use of Apple CarPlay will result in the transmission of certain user and vehicle information (such as vehicle location, speed, and status) to your iPhone to enhance the Apple CarPlay experience. You will need to consent to the sharing of this information on the audio/information screen.
Connecting Apple CarPlay Using the USB Cable to the USB Port
1. Connect the iPhone to the USB port using the USB cable.
2 USB Ports P. 251
u The confirmation screen will be displayed. 2. Select Yes.
u If you do not allow this consent, select No.
You may change the consent settings under the Connections*1/Smartphone Connection*2 settings menu.
Connect Apple CarPlay Wirelessly*
Connect Apple CarPlay wirelessly on the home screen 1. Press the button. 2. Select Smartphone Connection. 3. Select + Connect New Device. 4. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
5. Select Yes. u If your iPhone asks for permission to accept an Apple CarPlay connection, accept to connect.
*1: Models without wireless Apple CarPlay and wireless Android Auto *2: Models with wireless Apple CarPlay and wireless Android Auto

1Setting Up Apple CarPlay Only initialize Apple CarPlay when you are safely parked. When Apple CarPlay first detects your iPhone, you will need to set up your iPhone. Refer to the instruction manual that came with your iPhone.
You can also use the method below to set up Apple CarPlay:
Models with wireless Apple CarPlay and wireless Android Auto
Select HOMESettingsSmartphone ConnectionApple CarplaySelect device
Models without wireless Apple CarPlay and wireless Android Auto
Select HOMESettingsConnectionsSmartphone ConnectionApple CarPlaySelect device
Use of user and vehicle information The use and handling of user and vehicle information transmitted to/from your iPhone by Apple CarPlay is governed by the Apple iOS terms and conditions and Apple's Privacy Policy.
1Connect Apple CarPlay Wirelessly* Wireless Apple CarPlay and AT&T Hotspot cannot be used at the same time. When using Apple CarPlay and AT&T Hotspot at the same time, connect to Apple CarPlay with a USB cable.

322 * Not available on all models

https://manual-hub.com/

Connect Apple CarPlay wirelessly on the Apple CarPlay device list 1. Press the button. 2. Select Settings. 3. Select Smartphone Connection. 4. Select Apple CarPlay. 5. Select + Connect New Device. 6. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
7. Select Yes. u If your iPhone asks for permission to accept an Apple CarPlay connection, accept to connect.
Connect Apple CarPlay wirelessly on the Bluetooth® device list 1. Press the button. 2. Select Settings. 3. Select Connections. 4. Select Bluetooth. 5. Select + Connect New Device. 6. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
7. Check the box on Apple CarPlay. u If you select Apple CarPlay, you cannot select Audio and Phone.
8. Select Connect. 9. Select Yes.
u If your iPhone asks for permission to accept an Apple CarPlay connection, accept to connect.

uuAudio System Basic OperationuApple CarPlay

Features

Continued
https://manual-hub.com/

323

uuAudio System Basic OperationuApple CarPlay
Connect Apple CarPlay wirelessly with the steering wheel 1. Press and hold the (talk) button on the steering wheel. 2. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
3. Check the box on Apple CarPlay. u If you select Apple CarPlay, you cannot select Audio and Phone.
4. Select Connect. 5. Select Yes.
u If your iPhone asks for permission to accept an Apple CarPlay connection, accept to connect.

Features

324

https://manual-hub.com/

uuAudio System Basic OperationuApple CarPlay

Operating Apple CarPlay with Siri
Press and hold the (Talk) button to activate Siri.
(Talk) Button: Press and hold to activate Siri. Press again to deactivate Siri. Press and release to activate standard voice recognition system.

1Operating Apple CarPlay with Siri
Below are examples of questions and commands for Siri:
· What movies are playing today? · Call dad at work. · What song is this? · How's the weather tomorrow? · Read my latest email. · Find a table for four tonight in Chicago.
For more information, please visit www.apple.com/ios/siri.

Features

https://manual-hub.com/

325

uuAudio System Basic OperationuAndroid Auto

Android Auto
When you connect an Android phone to the audio system via the USB port or wirelessly*, Android Auto is automatically initiated. When connected via Android Auto, you can use the audio/information screen to access the Phone, Google Maps (Navigation), Google Play Music, and Google Now functions. When you first use Android Auto, a tutorial will appear on the screen. We recommend that you complete this tutorial while safely parked before using Android Auto.
2 USB Ports P. 251 2 Auto Pairing Connection P. 329

1Android Auto To use Android Auto, you need to download the Android Auto app from Google Play to your smartphone.
Only Android 5.0 (Lollipop) or later versions are compatible with Android Auto. Bluetooth A2DP cannot be used while your phone is connected to Android Auto.
Park in a safe place before connecting your Android phone to Android Auto and when launching any compatible apps.

To directly access the Android Auto phone function, press Phone on the home screen.
2 Auto Pairing Connection P. 329

When your Android phone is connected to Android Auto, it is not possible to use the Bluetooth® Audio. However, other previously paired phones can stream audio via Bluetooth® while Android Auto is connected.
2 Phone Setup P. 386

Apple CarPlay and Android Auto cannot run at the same time.

Features

326 * Not available on all models

https://manual-hub.com/

uuAudio System Basic OperationuAndroid Auto

Features

Android Auto Menu

1Android Auto

For details on countries and regions where Android

Auto is available, as well as information pertaining to

function, refer to the Android Auto homepage.

Screens may differ depending on the version of the Android Auto app you are using.

Android Auto icon

: Go back to the home screen

a Maps (Navigation) Display Google Maps and use the navigation function just as you would with your Android phone. When the vehicle is in motion, it is not possible to make keyboard entries. Stop the vehicle in a safe location to undertake a search or provide other inputs.
Models with navigation system
Only one navigation system (pre-installed navigation or Android Auto) can give directions at a time. When you are using one system, directions to any prior destination set on the other system will be canceled, and the system you are currently using will direct you to your destination. The audio/information screen shows you turn-by-turn driving directions to your destination. b Phone (Communication) Make and receive phone calls as well as listen to voicemail. c Google Now (Home screen) Display useful information organized by Android Auto into simple cards that appear just when they're needed.

Android Auto Operating Requirements & Limitations Android Auto requires a compatible Android phone with an active cellular connection and data plan. Your carrier's rate plans will apply.
Changes in operating systems, hardware, software, and other technology integral to providing Android Auto functionality, as well as new or revised governmental regulations, may result in a decrease or cessation of Android Auto functionality and services. Honda cannot and does not provide any warranty or guarantee of future Android Auto performance or functionality.
It is possible to use 3rd party apps if they are compatible with Android Auto. Refer to the Android Auto homepage for information on compatible apps.

Continued
https://manual-hub.com/

327

uuAudio System Basic OperationuAndroid Auto
d Music and audio Play Google Play Music and music apps that are compatible with Android Auto. To switch between music apps, press this icon. e Go back to the Home Screen. f Voice Operate Android Auto with your voice.

Features

328

https://manual-hub.com/

uuAudio System Basic OperationuAndroid Auto

Features

Auto Pairing Connection
When you connect an Android phone to the unit via the USB port or wirelessly*, Android Auto is automatically initiated.
Connecting Android Auto Using the USB Cable to the USB Port
1. Connect the Android phone to the USB port using the USB cable.
2 USB Ports P. 251
u The confirmation screen will be displayed. 2. Select Yes.
u If you do not allow this consent, select No.
You may change the consent settings under the Connections*1/Smartphone Connection*2 settings menu.
Connect Android Auto Wirelessly*
Connect Android Auto wirelessly on the home screen 1. Press the button. 2. Select Smartphone Connection. 3. Select + Connect New Device. 4. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
5. Select Yes. u If your Android phone asks for permission to accept an Android Auto connection, accept to connect.

1Auto Pairing Connection
Only initialize Android Auto when you are safely parked. When Android Auto first detects your phone, you will need to set up your phone so that auto pairing is possible. Refer to the instruction manual that came with your phone.
You can use the method below to change Android Auto settings after you have completed the initial setup:
Models with wireless Apple CarPlay and wireless Android Auto
Select HOMESettingsSmartphone ConnectionAndroid AutoSelect device
Models without wireless Apple CarPlay and wireless Android Auto
Select HOMESettingsConnectionsSmartphone ConnectionAndroid AutoSelect device
Use of user and vehicle information The use and handling of user and vehicle information transmitted to/from your phone by Android Auto is governed by the Google's Privacy Policy.
1Connect Android Auto Wirelessly*
Wireless Android Auto and AT&T Hotspot cannot be used at the same time. When using Android Auto and AT&T Hotspot at the same time, connect to Android Auto with a USB cable.

*1: Models without wireless Apple CarPlay and wireless Android Auto *2: Models with wireless Apple CarPlay and wireless Android Auto
* Not available on all models

Continued
https://manual-hub.com/

329

uuAudio System Basic OperationuAndroid Auto
Connect Android Auto wirelessly on the Android Auto device list 1. Press the button. 2. Select Settings. 3. Select Smartphone Connection. 4. Select Android Auto. 5. Select + Connect New Device. 6. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
7. Select Yes. u If your Android phone asks for permission to accept an Android Auto connection, accept to connect.
Connect Android Auto wirelessly on the Bluetooth® device list 1. Press the button. 2. Select Settings. 3. Select Connections. 4. Select Bluetooth. 5. Select + Connect New Device. 6. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
7. Check the box on Android Auto. u If you select Android Auto, you cannot select Audio and Phone.
8. Select Connect. 9. Select Yes.
u If your Android phone asks for permission to accept an Android Auto connection, accept to connect.

Features

330

https://manual-hub.com/

uuAudio System Basic OperationuAndroid Auto
Connect Android Auto wirelessly with the steering wheel 1. Press and hold the (talk) button on the steering wheel. 2. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.
2 Phone Setup P. 386
3. Check the box on Android Auto. u If you select Android Auto, you cannot select Audio and Phone.
4. Select Connect. 5. Select Yes.
u If your Android phone asks for permission to accept an Android Auto connection, accept to connect.

Features

Continued
https://manual-hub.com/

331

uuAudio System Basic OperationuAndroid Auto

Operating Android Auto with Voice Recognition
Press and hold the talk button to operate Android Auto with your voice.
(Talk) Button: Press and hold to operate Android Auto with your voice. Press and release to activate the standard voice recognition system.

1Operating Android Auto with Voice Recognition
Below are examples of commands you can give with voice recognition:
· Reply to text. · Call my wife. · Navigate to Honda. · Play my music. · Send a text message to my wife. · Call flower shop.
For more information, please refer to the Android Auto homepage.
You can also activate the voice recognition function by pressing the icon in the upper-right corner of the screen.

Features

332

https://manual-hub.com/

Audio Error Messages

iPod/USB Flash Drive

If an error occurs while playing an iPod or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

Solution

Connect Retry

Appears when the system does not acknowledge the iPod. Reconnect the iPod.

Unplayable File

Appears when the files in the USB flash drive are copyright protected or an unsupported format. This error message appears for about five seconds, then plays the next file.

No Data

iPod
Appears when the iPod is empty.
USB flash drive
Appears when the USB flash drive is empty.
iPod and USB flash drive
Check that compatible files are stored on the device.

Unsupported

Appears when an unsupported device is connected. If it appears when a supported device is connected, reconnect the device. Appears when unsupported formats are in the device. Check that compatible files are stored on the device.

Device No Response

Appears when the system does not communicate with a connected device. If it appears when a device is connected, contact your place of device purchase.

USB hub not supported

Appears when only a HUB is connected. If it appears, connect a USB flash drive to the HUB.

Features

https://manual-hub.com/

333

uuAudio Error MessagesuAndroid/Apps

Android/Apps

If an error occurs while using the audio system or apps, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

Solution

Unfortunately, **** has stopped.*1

Error has occurred within app, select OK on the screen to close the app.

**** is not responding. Would you like to close it?*1

App is not responding. Select Wait if you can wait for a response from app a little longer. If it does not respond even if you keep waiting, select OK to close the app and start it up. If the error message continues, perform Factory Data Reset.
2 Defaulting All the Settings P. 377

*1:****part is variable characters, and will change depending upon where an error occurs.

Features

334

https://manual-hub.com/

General Information on the Audio System

SiriusXM® Radio Service*
Subscribing to SiriusXM® Radio
1. You need your radio ID ready before registering for subscription. To see the ID in the screen, select Channel to 0.
2. Have your radio ID ready, and either call or visit the SiriusXM® website to subscribe.

1Subscribing to SiriusXM® Radio
Contact Information for SiriusXM® Radio:
· US: SiriusXM® Radio at
www.siriusxm.com/subscribenow, or 1-866-6352349
· Canada: SiriusXM® Canada at
www.siriusxm.ca/subscribe-now, or 1-877-2090079

Receiving SiriusXM® Radio
Switch to the SiriusXM® mode by using the audio remote controls on the steering wheel, or through the audio/information screen, and stay in this mode for about 30 minutes until the service is activated. Make sure your vehicle is in an open area with good reception.
SiriusXM® Radio Display Messages
Channel **** is not subscribed. Call SiriusXM to subscribe.*1: You are not subscribed to the channel selected. Subscription Updated: SiriusXM® radio is receiving information update from the network. Channel Not Available: No such channel exits, or the artist or title information is unavailable. No Signal: The signal is too weak in the current location. Check Tuner: There is a problem with the SiriusXM® tuner. Contact a dealer. Check Antenna: There is a problem with the SiriusXM® antenna. Contact a dealer.
*1 : ****part is variable characters, and will change depending upon where an subscribe.

1Receiving SiriusXM® Radio
The SiriusXM® satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.
You may experience reception problems under the following circumstances:
· In a location with an obstruction to the south of
your vehicle.
· In tunnels. · On the lower level of a multi-tiered road. · Large items carried on the roof rack.

Features

* Not available on all models

https://manual-hub.com/

335

uuGeneral Information on the Audio SystemuCompatible iPod, iPhone, and USB Flash Drives

Compatible iPod, iPhone, and USB Flash Drives
iPod and iPhone Model Compatibility
Model Made for iPod nano (7th generation) released in 2012 Made for iPod touch (5th to 7th generation) released between 2012 and 2019 Made for iPhone 5/iPhone 5s/iPhone 5c/iPhone 6/iPhone 6 Plus/iPhone 6s/iPhone 6s Plus/iPhone SE/iPhone 7/iPhone 7 Plus/iPhone 8/iPhone 8 Plus/iPhone X/iPhone XS/iPhone XS Max/iPhone XR/iPhone 11/iPhone 11 Pro/iPhone 11 Pro Max
USB Flash Drives
· A USB flash drive of 256 MB or higher is recommended. · Some digital audio players may not be compatible. · Some USB flash drives (e.g., a device with security lockout) may not work. · Some software files may not allow for audio play or text data display. · Some versions of MP3, WMA, AAC, FLAC or WAV formats may be unsupported.

1iPod and iPhone Model Compatibility
This system may not work with all software versions of these devices.
The Lightning connector works with iPhone 5, iPhone 5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus, iPhone SE, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPod touch (5th to 7th generation), iPod nano (7th generation).
USB works with iPhone 5, iPhone 5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus, iPhone SE, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPod touch (5th to 7th generation), iPod nano (7th generation).

1USB Flash Drives
Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.

Features

336

https://manual-hub.com/

uuGeneral Information on the Audio SystemuHonda App License Agreement

Honda App License Agreement
END USER LICENSE AGREEMENT
PLEASE CAREFULLY READ THIS END USER LICENSE AGREEMENT (THIS "AGREEMENT") WHICH GOVERNS YOUR USE OF THE SOFTWARE INSTALLED ON YOUR HONDA OR ACURA VEHICLE (YOUR "VEHICLE") AS WELL AS THE APPLICATIONS, SERVICES, FUNCTIONS, AND CONTENT PROVIDED THROUGH THE SOFTWARE (COLLECTIVELY, THE "SERVICES"). YOUR USE OF THE SOFTWARE OR SERVICES WILL SERVE AS YOUR CONSENT TO THE TERMS OF THIS AGREEMENT. THE SOFTWARE IS OWNED (OR LICENSED), PROVIDED, AND/OR OPERATED BY AMERICAN HONDA MOTOR CO. INC., ("HONDA," "US," "WE," OR "OUR"), WITH ITS BUSINESS ADDRESS AT 1919 TORRANCE BLVD., TORRANCE, CA 90501. REFERENCE TO "HONDA" IN THIS AGREEMENT INCLUDES HONDA'S PARENT COMPANY AND ITS AFFILIATES AND DESIGNATED AGENTS. THE SERVICES ARE OWNED (OR LICENSED), PROVIDED, AND/OR OPERATED BY HONDA OR A THIRD-PARTY SERVICE PROVIDER (A "PROVIDER"). REFERENCE TO A "PROVIDER" IN THIS AGREEMENT INCLUDES SUCH PROVIDER'S PARENT COMPANY, AFFILIATES, AND DESIGNATED AGENTS.

Features

A. Description of the Software. The SOFTWARE includes the software, firmware and the like, installed and executing on your VEHICLE during manufacture, and thereafter updated from time to time by HONDA, you or an authorized HONDA dealer (a "DEALER"). The SOFTWARE allows you to access and use a variety of SERVICES, including but not limited to: (a) HONDA applications, services, and content provided through the SOFTWARE (together, "HONDA SERVICES"); and (b) PROVIDER applications, services, and content provided through the SOFTWARE (together, "PROVIDER SERVICES"), each of which may provide access to various information, media, content, and services.

B. SOFTWARE Licensing and Intellectual Property. 1. SOFTWARE. This AGREEMENT grants you a non-exclusive, limited, and revocable license to use the SOFTWARE and SERVICES solely (a) as installed on your VEHICLE by HONDA, (b) as updated on your Vehicle by HONDA, you (but only as and when directed by HONDA), or a DEALER and (c) as permitted under the terms of this AGREEMENT.

2. HONDA Services. The SOFTWARE may provide you with access to various HONDA SERVICES. Installation, activation, or use of HONDA SERVICES may require your consent to additional terms, conditions, and privacy policies applicable to those HONDA SERVICES (the "HONDA TERMS"). You acknowledge and agree that any collection, use, sharing of data generated by your VEHICLE or your use of your VEHICLE, and your use of the HONDA SERVICES shall be subject to this AGREEMENT and any additional HONDA TERMS that may be specifically applicable to such HONDA SERVICES or data generation. The HONDA SERVICES may collect, use, and share such data while you are using the SOFTWARE.

https://manual-hub.com/

Continued 337

uuGeneral Information on the Audio SystemuHonda App License Agreement
3. Open-Source Software. The SOFTWARE and SERVICES may incorporate software licensed to HONDA under free or open-source licenses which govern HONDA's distribution and your use of such software. HONDA and the third-party authors, licensors, and distributors of such software disclaim all warranties and all liability arising from any and all use or distribution of the software. To the extent such software is provided under terms that differ from the applicable free or open-source licenses, those terms are offered by HONDA alone. Additional information regarding free and open-source software incorporated in the SOFTWARE and SERVICES is available in this manual or within the SOFTWARE.
4. Provider Services. The SOFTWARE may provide you with access to various PROVIDER SERVICES. Installation or use of such PROVIDER SERVICES may require your consent to additional terms, conditions, and privacy policies of the applicable PROVIDER (the "PROVIDER TERMS"). This AGREEMENT restricts the manner in which you can install and use PROVIDER SERVICES but does not grant you a license or permission to use such PROVIDER SERVICES. Your permission to use PROVIDER SERVICES is limited and subject to any license grants, conditions, and limitations included in the PROVIDER TERMS. You acknowledge that any collection, use, sharing of your information, targeted advertising practices by PROVIDERS, and your use of the PROVIDER SERVICES shall be subject to both this AGREEMENT and any applicable PROVIDER TERMS. The PROVIDER SERVICES may collect, use, and share such information while you are using the SOFTWARE.
5. License Limitations and Restrictions on Use. (a) Limited License. You understand and agree that the SOFTWARE and SERVICES are licensed, not sold, to you solely for use in accordance with this AGREEMENT and any applicable PROVIDER TERMS, and any documentation for the VEHICLE made available to you by HONDA (any "DOCUMENTATION"). HONDA and its licensors reserve all rights in the SOFTWARE and HONDA SERVICES not expressly granted to you under this AGREEMENT. PROVIDERS and their licensors reserve all rights in the PROVIDER SERVICES not expressly granted to you under the applicable PROVIDER TERMS.

Features

338

https://manual-hub.com/

uuGeneral Information on the Audio SystemuHonda App License Agreement
(b) Restrictions on Use. The licenses granted under this AGREEMENT do not permit you to use the SOFTWARE or SERVICES on a device other than your VEHICLE. As a condition of using the SOFTWARE and SERVICES, you agree that you may not and will not:
(1) copy, download, distribute, modify, publish, sell, rent, lease, lend, license, sublicense, reuse, or create derivative works of the SOFTWARE or SERVICES or any of the content or other material within the SOFTWARE or SERVICES, including without limitation, HONDA or PROVIDER names, logos, or any other trademarks of HONDA or PROVIDERS or used in association with the SOFTWARE or any SERVICES, except as required to use the SOFTWARE or SERVICES in accordance with this AGREEMENT, any applicable PROVIDER TERMS, and the DOCUMENTATION; (2) access or use the SOFTWARE or SERVICES in any manner intended to damage or impair the operation of the SOFTWARE or SERVICES or interfere with anyone else's use and enjoyment of the SOFTWARE or SERVICES; (3) access or attempt to access any system or server on which the SOFTWARE or SERVICES is hosted or modify or alter the SOFTWARE or SERVICES in any way; (4) use the SOFTWARE or SERVICES for any unlawful purpose, or in violation of any third party rights; (5) use the SOFTWARE or SERVICES in violation of any applicable traffic regulations, rules or laws, including but not limited to any driver distraction laws, rules or regulations; (6) violate the terms of this AGREEMENT, any HONDA TERMS, any PROVIDER TERMS or other applicable third-party terms, conditions, and privacy policies; or (7) reverse engineer, decompile, disassemble, attempt to derive the source code of, nor permit others to reverse engineer, decompile, or disassemble, or attempt to derive the source code of the SOFTWARE or SERVICES, except and only to the extent that such activity is expressly permitted (a) by applicable law notwithstanding this limitation or (b) the terms of applicable free or opensource software licenses.
6. Intellectual Property Rights. All title and intellectual property rights in and to the SOFTWARE and SERVICES, the accompanying DOCUMENTATION, and all copies of the SOFTWARE or SERVICES are owned by HONDA, PROVIDERS, or their suppliers or licensors. This AGREEMENT does not grant you any rights in connection with any trademarks or service marks of HONDA, PROVIDERS, or their licensors, affiliates, or suppliers.

Features

https://manual-hub.com/

Continued 339

uuGeneral Information on the Audio SystemuHonda App License Agreement

Features

7. Export Restrictions: You acknowledge that the SOFTWARE and SERVICES are subject to U.S., European Union, and other export jurisdictions. You agree to comply with all applicable international and national laws that apply to the SOFTWARE and SERVICES, including the U.S. Export Administration Regulations, as well as end-user, end-use, and destination restrictions issued by the U.S. and other governments.
C. SOFTWARE Operation 1. HONDA reserves the right to suspend or terminate your access to and use of the SOFTWARE or SERVICES if you are found to be in violation of this AGREEMENT or as reasonably deemed necessary by HONDA.
2. Eligibility/Registration/Activation. The SOFTWARE is intended for and available to individuals who (a) are of legal age of majority in their jurisdiction of residence (and at least 18 years of age), or are younger than 18 years of age and possess a valid driver's license issued by their jurisdiction of residence, and (b) own or have permissive access to a compatible VEHICLE. We do not knowingly collect any information, including personal information, from children under 13. If we learn or are notified that we have collected personal information of a child under 13, we will immediately take steps to delete such information.
3. Use of PROVIDER SERVICES through the SOFTWARE. Certain PROVIDER SERVICES made available through the SOFTWARE may require that you register or otherwise have an account with the PROVIDER and agree to PROVIDER TERMS. Any use of any of such PROVIDER SERVICES within the SOFTWARE is subject to this AGREEMENT and the applicable PROVIDER TERMS. HONDA does not exercise control over such PROVIDER SERVICES and is not responsible or liable for the availability, security, or content of such PROVIDER SERVICES, and the inclusion of any PROVIDER SERVICES does not imply a referral from, the approval of, or the endorsement by HONDA of such PROVIDER SERVICES. HONDA is not responsible or liable, directly or indirectly, for any damage relating to or resulting from your use of the PROVIDER SERVICES.
4. Links to Third Party Sites: The SOFTWARE may provide you with the ability to access third-party sites and content through the use of the SOFTWARE or SERVICES. The third-party sites and content are not under the control of HONDA. HONDA is not responsible or liable, directly or indirectly, for such third-party websites and their content or for any damage relating to or resulting from your access or use of such websites and content.

340

https://manual-hub.com/

uuGeneral Information on the Audio SystemuHonda App License Agreement
5. Unauthorized Use and Abuse. You are responsible for ensuring your (and any authorized third parties') use of the SOFTWARE and SERVICES remains in compliance with this AGREEMENT and all other applicable HONDA TERMS and PROVIDER TERMS. You acknowledge and agree that any use of the SOFTWARE or SERVICES occurring through your VEHICLE will be deemed your actions and that HONDA and PROVIDERS may rely upon such actions. You agree to immediately notify us if you suspect fraudulent or abusive activity involving the SOFTWARE or SERVICES. If you so notify us or if we otherwise suspect fraudulent or abusive activity, you agree to cooperate with us in any fraud investigation and to use any fraud prevention measures we prescribe. Your failure to immediately notify us or cooperate to use such measures will result in your liability for all fraudulent usage or abusive activity associated with your VEHICLE.
6. SOFTWARE Updates. The SOFTWARE and SERVICES may be updated when your VEHICLE is serviced by a DEALER or remotely, over-theair, by HONDA from time to time; such updates may occur with or without further notice or your future consent. The SOFTWARE may be updated at HONDA's discretion and for any purpose including, without limitation, to patch or otherwise improve the SOFTWARE or SERVICES functionality, security, or stability. All updates to the SOFTWARE and SERVICES are subject to this AGREEMENT and any other applicable HONDA TERMS and PROVIDER TERMS.
7. Uninstalling, Removing, and Replacing the SOFTWARE. Replacing SOFTWARE or HONDA SERVICES with software or firmware not provided and installed by HONDA or a DEALER will render all representations and warranties for the SOFTWARE, HONDA SERVICES, and VEHICLE functionality reliant upon the SOFTWARE or HONDA SERVICES null and void.
D. SOFTWARE Operational Notices and Warnings 1. Vehicle Geolocation Information. You acknowledge that your VEHICLE may be equipped with certain traffic and map features. The traffic feature will automatically collect and transmit, through GPS technology, your Vehicle's current location (longitude and latitude), travel direction and speed ("VEHICLE GEOLOCATION INFORMATION") to HONDA and PROVIDERS. The VEHICLE GEOLOCATION INFORMATION is used by HONDA and PROVIDERS to provide traffic and navigation-related information to you, but may also be used to provide other SERVICES or offers to you. HONDA will not use such VEHICLE GEOLOCATION INFORMATION for its own marketing efforts, or provide such information to unaffiliated third parties for their own purposes, without your express consent.

Features

https://manual-hub.com/

Continued 341

uuGeneral Information on the Audio SystemuHonda App License Agreement
2. Potential Map Inaccuracy and Route Safety. Maps used by this system may be inaccurate because of changes in roads, traffic controls, routing, or driving conditions. Always use good judgment and common sense when following suggested routes. Do not follow the route suggestions if doing so would result in an unsafe or illegal driving maneuver, if you would be placed in an unsafe situation, or if you would be directed into an area that you consider unsafe. Do not rely on any navigation features included in the system to route you to emergency services. Not all emergency services such as police, fire stations, hospitals, or clinics are likely to be contained in the map database for such navigation features. Ask local authorities or an emergency services operator for such locations and routes. The driver is ultimately responsible for the safe operation of the vehicle and therefore, must evaluate whether it is safe to follow the suggested directions. Any navigation features are provided only as an aid. Make your driving decisions based on your observations of local conditions and existing traffic regulations. Navigation features are not a substitute for your personal judgment. Any route suggestions made by the SOFTWARE or SERVICES should never replace any local traffic regulations or your personal judgment or knowledge of safe driving practices.
3. Speech Recognition: You acknowledge and understand that HONDA and PROVIDERS may record, retain, and use voices commands when you use the speech recognition components of the SOFTWARE or SERVICES. You and all VEHICLE operators and passengers (a) consent to the recording and retention of voice commands in support of providing speech recognition components and (b) release HONDA and PROVIDERS from all claims, liabilities, and losses that may result from any use of such recorded voice commands. Recognition errors are inherent in speech recognition. It is your responsibility to monitor any speech recognition functions included in the system and address any errors. Neither HONDA nor PROVIDERS will be liable for any damages arising out of errors in the speech recognition process.
4. Distraction Hazards. Navigation features may require manual (non-verbal) input or setup. Attempting to perform such set-up or insert data while driving can seriously distract your attention and could cause a crash or other serious consequences; the ability to undertake such interactions may also be limited by state or local law, which laws you are responsible to know and follow. Even occasional short scans of the screen may be hazardous if your attention has been diverted away from your driving at a critical time. Pull over and stop the vehicle in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could result in a crash.

Features

342

https://manual-hub.com/

uuGeneral Information on the Audio SystemuHonda App License Agreement

Features

E. Information Collection and Storage 1. Information Collection, Use, Transmission and Storage of Data. Consent to Use of Data: You agree that HONDA and PROVIDERS may collect and use your information gathered in any manner as part of product support services related to the SOFTWARE or related services. HONDA may share such information with third parties, including, without limitation, PROVIDERS, third party software and services suppliers, their affiliates and/or their designated agents, solely to improve their products or to provide services or technologies to you. HONDA, third party software and systems suppliers, their affiliates and/or their designated agent may disclose this information to others, but not in a form that personally identifies you.
2. Information Storage. Depending on the type of multimedia system you have in your VEHICLE, certain information may be stored for ease of use of the SOFTWARE including, without limitation, search history, location history in certain applications, previous and saved destinations, map locations within certain applications, and device numbers and contact information.
(a) Vehicle Health Information. Your VEHICLE may remotely transmit information regarding the status and health of your VEHICLE ("VEHICLE INFORMATION") to HONDA without notification to you. VEHICLE INFORMATION may contain VEHICLE maintenance and malfunction status that is derived from VEHICLE diagnostic data and includes, but is not limited to, status of powered doors and windows, battery life data, battery charging data, VEHICLE speed, coolant temperature, air compressor revolution, output power, warning codes, diagnostic trouble codes, fuel injection volume, and engine rotations per minute. VEHICLE HEALTH INFORMATION may be used by HONDA for research and development, to deliver HONDA SERVICES and information to you, and to contact you, and is retained only for a period of time necessary to fulfill these goals.
(b) VEHICLE Geolocation Data (non-navigation/map based). If you opt-in to geolocation-based SERVICES, your vehicle's geolocation data (latitude and longitude) will be automatically sent from your VEHICLE to HONDA and PROVIDERS.
(c) You understand that the inputting or uploading of information to your VEHICLE's multimedia system or the SOFTWARE or SERVICES is at your own risk and that HONDA is not responsible for unauthorized access to or use of any personal or other information. All information uploaded to the SOFTWARE and SERVICES may be stored on your VEHICLES's multimedia system and you understand that the security and safety of your VEHICLE's multimedia system is your sole responsibility.

https://manual-hub.com/

Continued 343

uuGeneral Information on the Audio SystemuHonda App License Agreement
F. NO WARRANTY. You understand and agree that your use of the SOFTWARE and SERVICES are solely at your own risk and that you will be solely responsible for any damage to your VEHICLE's multimedia system or any other equipment or any loss of data that may result from your use of the SOFTWARE or SERVICES. THE SOFTWARE AND SERVICES ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS WITHOUT ANY WARRANTY OF ANY KIND, EXPRESSED, IMPLIED OR STATUTORY. WE SPECIFICALLY DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. HONDA makes no warranties that the SOFTWARE or SERVICES will meet your requirements, or that the SOFTWARE or SERVICES will be uninterrupted, timely, secure, noninfringing or error free. You understand and agree that you are responsible for any and all charges, costs or expenses associated with your use of the SOFTWARE or SERVICES. Advice or information, whether oral or written, obtained by you from us or through the SOFTWARE or SERVICES are provided for informational purposes only and will not create any warranty not expressly made herein. You should not rely on any such information or advice. We assume no liability or responsibility for any errors or omissions in the SOFTWARE or SERVICES. We do not make any warranty or representation that your use of the material displayed on, or obtained through, the SOFTWARE or SERVICES is non-infringing of any rights of any third party. Any decision or action taken by you on the basis of information or content provided via the application is at your sole discretion and risk. HONDA and PROVIDERS are not responsible or liable for any such decision, or for the accuracy, completeness, usefulness, or availability of any content or information displayed, transmitted, or otherwise made available via the SOFTWARE or SERVICES. To the extent jurisdictions do not allow the exclusion of certain warranties, some of the above exclusions may not apply to you.
G. LIMITATIONS ON LIABILITY. You and HONDA are each waiving important rights. 1. Limitations on YOUR liability. HONDA cannot recover from you any consequential, indirect, incidental, or special damages, or attorney's fees in connection with your use of the SOFTWARE or HONDA SERVICES. HONDA WAIVES TO THE FULLEST EXTENT ALLOWED BY LAW ANY CLAIM FOR DAMAGES OTHER THAN DIRECT, COMPENSATORY DAMAGES AS LIMITED IN THIS AGREEMENT.

Features

344

https://manual-hub.com/

uuGeneral Information on the Audio SystemuHonda App License Agreement

Features

2. Limitation on HONDA and PROVIDER liability. Neither HONDA nor PROVIDERS will be liable to you or any other party for consequential, indirect, incidental, special, or punitive damages (including without limitation lost profits) in connection with your use of the SOFTWARE or SERVICES, even if HONDA or PROVIDERS are aware of the possibility of such damages. These limitations apply to all claims, including, without limitation, claims in contract and tort (such as negligence, product liability and strict liability). To the extent that a jurisdiction does not permit the exclusion or limitation of liability as set forth herein our liability is limited to the maximum extent permitted by law in such states. If HONDA or PROVIDERS are found liable to you for any reason, you agree that the aggregate liability of all these parties to you for any claim is limited to ten U.S. dollars (US $10.00). Neither HONDA nor any PROVIDER would have agreed to provide the SOFTWARE or SERVICES to you if you did not agree to this limitation. This amount is the sole and exclusive liability of HONDA and PROVIDERS to you, and is payable as liquidated damages and not as a penalty. Except where prohibited by law, you may not bring any claim against HONDA or any third-party beneficiary more than two (2) years after the claim arises. We do not have any liability for SOFTWARE or SERVICES interruptions of any length.
(a) Release of HONDA and PROVIDERS For yourself and anyone else claiming under you, you agree to release and discharge HONDA, PROVIDERS, their respective officers, directors, and employees, and each third-party beneficiary from all claims, liabilities and losses in connection with the SOFTWARE or SERVICES, including, but not limited to claims for personal injury or property damage arising from the total or partial failure of performance of the SOFTWARE or SERVICES, even if caused by or based upon the negligence, gross negligence, strict products liability, Deceptive Trade Practices Act violations, bad faith, or breach of warranty of us or the malfunction of the SOFTWARE or SOFTWARE SERVICES. YOU AGREE TO WAIVE TO THE FULLEST EXTENT ALLOWED BY LAW, ANY CLAIM FOR DAMAGES OTHER THAN DIRECT, COMPENSATORY DAMAGES AS LIMITED IN THIS AGREEMENT. YOU HEREBY RELEASE AND DISCHARGE HONDA AND ITS LICENSORS AND CONTRACTORS (INCLUDING ANY THIRD PARTIES PROVIDING ALL OR PART OF THE SOFTWARE OR SERVICES) FROM AND AGAINST ANY CLAIMS, DAMAGES, EXPENSES AND LIABILITY ARISING FROM OR RELATED TO ANY INJURIES, DAMAGES, OR LOSSES TO ANY PERSON (INCLUDING DEATH) OR PROPERTY OF ANY KIND RESULTING IN WHOLE OR PART, DIRECTLY OR INDIRECTLY, FROM YOUR USE OF THE SOFTWARE OR SERVICES.
H. Survival. You agree that the limitations of liability and indemnities in this AGREEMENT will survive even after the AGREEMENT has ended. These limitations of liability apply not only to you, but to anyone using the SOFTWARE or SERVICES via your VEHICLE, to anyone making a claim on your behalf, and to any claims made by your family, employees, customers, or others arising out of or relating to your VEHICLE, the SOFTWARE, or SERVICES.

https://manual-hub.com/

Continued 345

uuGeneral Information on the Audio SystemuHonda App License Agreement
I. Availability/Interruption. The SOFTWARE and certain SERVICES are made available through your VEHICLE's compatible multimedia system when the VEHICLE is turned on. Certain SERVICES may be available only through your compatible mobile device when it is within the operating range of the VEHICLE and a wireless carrier. The availability of the SOFTWARE and SERVICES may be subject to transmission limitation or interruption, including but not limited to technical obsolesce or sunsetting of the hardware, software or firmware, inside of or external to the Vehicle, required for data transmission or receipt. HONDA does not guarantee that the SOFTWARE, SERVICES, or any portion thereof will be available at all times or in all areas. You acknowledge and agree that HONDA is not responsible for performance degradation, interruption or delays. You acknowledge that HONDA shall not be liable to you if the SOFTWARE or SERVICES in a given location are not available. If the SOFTWARE or SERVICES are not available within your intended location, you agree that your sole remedy shall be to cease using the SOFTWARE and SERVICES.
J. PRODUCT SUPPORT: Product support for the SOFTWARE is provided by HONDA. For product support, please refer to HONDA instructions provided in the DOCUMENTATION. Should you have any questions concerning this AGREEMENT, or if you desire to contact HONDA for any other reason, please refer to the HONDA contact information provided in the DOCUMENTATION.
K. Termination and Transfer. 1. Termination. This AGREEMENT is effective until terminated by you or US. WE may terminate this AGREEMENT for any or no reason, and with or without notice to you. Your rights under this AGREEMENT will terminate automatically without notice from US if you fail to comply with any term of this AGREEMENT. Upon termination of this AGREEMENT, you shall cease all use of the SOFTWARE and SERVICES.
2. Transfer: You may permanently transfer your rights under this AGREEMENT only as part of a sale or transfer of the VEHICLE, provided you retain no copies, you transfer all of the SOFTWARE and HONDA SERVICES (including all component parts, the media and printed materials, and any upgrades), and the recipient agrees to the terms of this AGREEMENT. You agree to notify HONDA upon the sale or transfer of the VEHICLE. To contact HONDA, please refer to the HONDA contact information provided in the DOCUMENTATION.

Features

346

https://manual-hub.com/

uuGeneral Information on the Audio SystemuHonda App License Agreement
L. Changes to the SOFTWARE or SERVICES. WE may change, modify, or update the SOFTWARE or SERVICES from time to time. Unless explicitly stated otherwise, any new features or services that augment or enhance the SOFTWARE or SERVICES in the future shall respectively be considered part of the SOFTWARE or SERVICES and subject to this AGREEMENT. WE reserve the right at any time and from time to time to interrupt, restrict, modify, suspend, discontinue, temporarily or permanently, the SOFTWARE or SERVICES (or any portion thereof), with or without notice to you, and you agree that HONDA shall not be liable to you or to any third party for any modification, suspension or discontinuance of the SOFTWARE or SERVICES.
M. ARBITRATION: PLEASE READ THIS ARBITRATION PROVISION CAREFULLY TO UNDERSTAND YOUR RIGHTS. YOU AGREE THAT ANY CLAIM THAT YOU MAY HAVE IN THE FUTURE MUST BE RESOLVED THROUGH BINDING ARBITRATION. YOU WAIVE THE RIGHT TO HAVE YOUR DISPUTE HEARD IN COURT AND WAIVE THE RIGHT TO BRING CLASS CLAIMS. YOU UNDERSTAND THAT DISCOVERY AND APPEAL RIGHTS ARE MORE LIMITED IN ARBITRATION. Arbitration is a method of resolving a claim, dispute or controversy without filing a lawsuit. By agreeing to arbitrate, the right to go to court is waived and instead claims, disputes or controversies are submitted to binding arbitration. This provision sets forth the terms and conditions of our agreement. YOU and HONDA agree and acknowledge that this Agreement affects interstate commerce and the Federal Arbitration Act ("FAA") applies. By using the Software, Vehicle, or Services, YOU elect to have disputes resolved by arbitration. YOU, HONDA or any involved third party may pursue a Claim. "Claim" means any dispute between YOU, HONDA, or any involved third party relating to your use of the Software, the Vehicle, or the Services, this Agreement, or our relationship, including any representations, omissions or warranties. "Claim" does not include personal injury or wrongful death claims. YOU or HONDA may seek remedies in small claims court or provisional judicial remedies without arbitrating. In addition, notwithstanding anything herein to the contrary, YOU or HONDA may seek equitable relief in a court of competent jurisdiction. YOU or HONDA may select arbitration with American Arbitration Association, JAMS or National Arbitration and Mediation. Contact these sponsors for their rules. The hearing will be in the federal district where YOU reside. If agreed, it may be by telephone or written submissions. Filing and arbitrator fees to be paid per the sponsor rules. You may contact the sponsor for a fee waiver. If no fee waivers, HONDA will pay filing and arbitrator fees up to $5,000, unless law requires more. Each party is responsible for other fees. Arbitrator may award costs or fees to prevailing party, if permitted by law. HONDA will not seek fees, unless the claims are frivolous.

Features

https://manual-hub.com/

Continued 347

uuGeneral Information on the Audio SystemuHonda App License Agreement
Arbitrator shall be an attorney or current or retired judge familiar with automotive or consumer software. The arbitrator shall follow substantive law, statute of limitations and decide all issues relating to the interpretation, construction, enforceability and applicability of this provision. The arbitrator may order relief permitted by law. This provision is governed and enforceable by the FAA. An award shall include a written opinion and be final, subject to appeal by the FAA. This provision survives termination of this Agreement or relationship, bankruptcy, assignment or transfer. If part of this provision is unenforceable, the remainder remains in effect. If unenforceability allows arbitration as a class action, then this provision is entirely unenforceable. YOU may opt out within 30 days of your initial use of the Software by sending a signed, written notice to HONDA at Honda Financial Services, P.O. Box 165007, Irving, TX 75016. HONDA reserves the right to make changes to this provision after providing written notice and an opportunity to opt out.
N. Miscellaneous: You may not assign this AGREEMENT without HONDA's prior written consent. This AGREEMENT and any additional HONDA TERMS and PROVIDER TERMS represents the entire agreement between you and US. HONDA may amend the terms of this AGREEMENT by providing you with notices of such updated terms. If you do not consent to be bound by the updated terms, your sole remedy will be to cease using the SOFTWARE and SERVICES. If any part of this AGREEMENT is found invalid, void, or unenforceable, the balance of the AGREEMENT will remain valid and enforceable according to its terms. To the fullest extent permitted by law, and except as explicitly provided otherwise, this AGREEMENT and any disputes arising out of or relating to it will be governed by the laws of the State of California, except that California laws concerning choice of law or conflicts shall not apply if they would cause the substantive law of another jurisdiction to apply. Notwithstanding the foregoing, Section M shall be governed by the Federal Arbitration Act and the laws of the State of California, as applicable, as set forth therein. The failure to enforce any term of this AGREEMENT on one occasion shall not prevent enforcement on any other occasion or the enforcement of any other term. Headings and captions shall not be considered included for purposes of interpretation or application hereof, but are for convenience only.

Features

348

https://manual-hub.com/

uuGeneral Information on the Audio SystemuLegal Information on Apple CarPlay/Android Auto
Legal Information on Apple CarPlay/Android Auto
OWNER'S MANUAL LICENSE/LIABILITY STATEMENTS
USE OF APPLE CARPLAY IS SUBJECT TO YOUR AGREEMENT TO THE CARPLAY TERMS OF USE, WHICH ARE INCLUDED AS PART OF THE APPLE iOS TERMS OF USE. IN SUMMARY, THE CARPLAY TERMS OF USE DISCLAIM APPLE AND ITS SERVICE PROVIDERS' LIABILITY IF THE SERVICES FAIL TO PERFORM CORRECTLY OR ARE DISCONTINUED, STRICTLY LIMIT APPLE AND ITS SERVICE PROVIDERS' OTHER LIABILITIES, DESCRIBE THE KINDS OF USER INFORMATION (INCLUDING, FOR EXAMPLE, VEHICLE LOCATION, VEHICLE SPEED, AND VEHICLE STATUS) BEING GATHERED AND STORED BY APPLE AND ITS SERVICE PROVIDERS, AND DISCLOSE CERTAIN POSSIBLE RISKS ASSOCIATED WITH THE USE OF CARPLAY, INCLUDING THE POTENTIAL FOR DRIVER DISTRACTION. SEE APPLE'S PRIVACY POLICY FOR DETAILS REGARDING APPLE'S USE AND HANDLING OF DATA UPLOADED BY CARPLAY.
USE OF ANDROID AUTO IS SUBJECT TO YOUR AGREEMENT TO THE ANDROID AUTO TERMS OF USE WHICH MUST BE AGREED TO WHEN THE ANDROID AUTO APPLICATION IS DOWNLOADED TO YOUR ANDROID PHONE. IN SUMMARY, THE ANDROID AUTO TERMS OF USE DISCLAIM GOOGLE AND ITS SERVICE PROVIDERS' LIABILITY IF THE SERVICES FAIL TO PERFORM CORRECTLY OR ARE DISCONTINUED, STRICTLY LIMIT GOOGLE AND ITS SERVICE PROVIDERS' OTHER LIABILITIES, DESCRIBE THE KINDS OF USER INFORMATION (INCLUDING, FOR EXAMPLE, VEHICLE LOCATION, VEHICLE SPEED, AND VEHICLE STATUS) BEING GATHERED AND STORED BY GOOGLE AND ITS SERVICE PROVIDERS, AND DISCLOSE CERTAIN POSSIBLE RISKS ASSOCIATED WITH THE USE OF ANDROID AUTO, INCLUDING THE POTENTIAL FOR DRIVER DISTRACTION. SEE GOOGLE'S PRIVACY POLICY FOR DETAILS REGARDING GOOGLE'S USE AND HANDLING OF DATA UPLOADED BY ANDROID AUTO.

Features

https://manual-hub.com/

Continued 349

uuGeneral Information on the Audio SystemuLegal Information on Apple CarPlay/Android Auto

Features

DISCLAIMER OF WARRANTIES; LIMITATION ON LIABILITY
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF APPLE CARPLAY OR ANDROID AUTO ("THE APPLICATIONS") IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AND THAT THE APPLICATIONS AND INFORMATION ON THE APPLICATIONS IS PROVIDED "AS IS" AND "AS AVAILABLE," WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND HONDA HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLICATIONS AND INFORMATION ON THE APPLICATIONS, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, QUIET ENJOYMENT, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY HONDA OR AN AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. AS EXAMPLES, AND WITHOUT LIMITATION, HONDA DISCLAIMS ANY WARRANTY REGARDING THE ACCURACY OF DATA PROVIDED BY THE APPLICATIONS, SUCH AS THE ACCURACY OF DIRECTIONS, ESTIMATED TRAVEL TIME, SPEED LIMITS, ROAD CONDITIONS, NEWS, WEATHER, TRAFFIC, OR OTHER CONTENT PROVIDED BY APPLE, GOOGLE, THEIR AFFILIATES, OR THIRD PARTY PROVIDERS; HONDA DOES NOT GUARANTEE AGAINST LOSS OF APPLICATION DATA, WHICH MAY BE LOST AT ANY TIME; HONDA DOES NOT GUARANTEE THAT THE APPLICATIONS OR ANY SERVICES PROVIDED THROUGH THEM WILL BE PROVIDED AT ALL TIMES OR THAT ANY OR ALL SERVICES WILL BE AVAILABLE AT ANY PARTICULAR TIME OR LOCATION. FOR EXAMPLE, SERVICES MAY BE SUSPENDED OR INTERRUPTED WITHOUT NOTICE FOR REPAIR, MAINTENANCE, SECURITY FIXES, UPDATES, ETC., SERVICES MAY BE UNAVAILABLE IN YOUR AREA OR LOCATION, ETC. IN ADDITION, YOU UNDERSTAND THAT CHANGES IN THIRD PARTY TECHNOLOGY OR GOVERNMENT REGULATION MAY RENDER THE SERVICES AND/OR APPLICATIONS OBSOLETE AND/OR UNUSABLE.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL HONDA OR ITS AFFILIATES BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, CORRUPTION OR LOSS OF DATA, FAILURE TO TRANSMIT OR RECEIVE ANY DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO THE APPLICATIONS OR YOUR USE OF OR INABILITY TO USE THE APPLICATIONS OR INFORMATION ON THE APPLICATIONS, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF HONDA WERE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES AND JURISDICTIONS DISALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR DAMAGES, SO THESE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. IN NO EVENT SHALL HONDA'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES (OTHER THAN AS MAY BE REQUIRED BY APPLICABLE LAW IN CASES INVOLVING PERSONAL INJURY) EXCEED THE AMOUNT OF FIVE DOLLARS ($5.00). THE FOREGOING LIMITATIONS WILL APPLY EVEN IF THE ABOVE STATED REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

350

https://manual-hub.com/

uuGeneral Information on the Audio SystemuAbout Open Source Licenses

About Open Source Licenses
To see the open source license information, follow these steps. 1. Press the button. 2. Select Settings. 3. Select System. 4. Select About. 5. Select Legal Information. 6. Select Licence.

1About Open Source Licenses
Models with Telematics Control Unit
Free/Open Source Software Information.
This product contains Free/Open Source Software(FOSS). The license information and/or the source code of such FOSS can be found at the following URL:
https://www.denso.com/global/en/opensource/tcu/ honda/

Features

https://manual-hub.com/

351

uuGeneral Information on the Audio SystemuLicense Information*
License Information*
DOLBY DIGITAL
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Features

DTS
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc.©DTS, Inc. All Rights Reserved.

352 * Not available on all models

https://manual-hub.com/

uuGeneral Information on the Audio SystemuLicense Information*
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PANASONIC CORPORATION is under license. Other trademarks and trade names are those of their respective owners.
Windows Media
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.

Features

Continued
https://manual-hub.com/

353

uuGeneral Information on the Audio SystemuLicense Information*
Apple
"Made for iPod," and "Made for iPhone," mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone, may affect wireless performance. Apple, the Apple Logo, iPhone, iPod nano, iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Apple CarPlay, and Lightning are trademarks of Apple Inc. App Store is a service mark of Apple Inc.

Features

354

https://manual-hub.com/

uuGeneral Information on the Audio SystemuLicense Information*
MPEG
Mpeg4 Visual THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUALA STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
VC-1 THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD ("VC-1 VIDEO") AND/OR (ii) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.

Features

Continued
https://manual-hub.com/

355

uuGeneral Information on the Audio SystemuLicense Information*
AVC/H.264 THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.
SDHC Memory Card
microSDHC Logo is a trademark of SD-3C, LLC.

Features

356

https://manual-hub.com/

Customized Features
Use the audio/information screen to customize certain features. How to customize With the power mode in ON, select Settings, then select a setting item.

1Customized Features When you customize settings:
· Make sure that the vehicle is at a complete stop. · Put the transmission into (P.
To customize features detail, refer to the following. 2 Customization flow P. 358 2 List of customizable options P. 365

Audio/Information Screen

Features

Continued
https://manual-hub.com/

357

Features

uuCustomized Featuresu
Customization flow
Press the button. Select Settings.
System
358 * Not available on all models

Day & Time

Set Date & Time

Time Zone

Language Touch Panel Sensitivity System Volumes
Config. of Instrument Panel
Security

Auto Daylight Saving Time
Date Format Time Format
System Volumes Reading/Warning Select Configuration
Password Unknown sources

Automatic Date & Time
Set Date Set Time Automatic Time
Zone* (Select time zone)
Verbal Reminder

https://manual-hub.com/

uuCustomized Featuresu

Accessibility

Caption Text-to-speech output

Refuel recommend*
About
Factory Data Reset Detail
Information

Status Legal Information
App Manager Recent Location Requests Apps

Caption Language Text Size Caption style

Features

* Not available on all models

https://manual-hub.com/

Continued 359

uuCustomized Featuresu

Smartphone Connection*1

Apple CarPlay Android Auto

+ Connect New Device (Saved Devices)
+ Connect New Device (Saved Devices)

Connections

Wi-Fi
Bluetooth
Smartphone Connection*2

Change Mode (Available Networks/Connected Devices)
+ Connect New Device (Saved Devices) Apple CarPlay Android Auto

Features

*1:Models with wireless Apple CarPlay and wireless Android Auto *2:Models without wireless Apple CarPlay and wireless Android Auto 360
https://manual-hub.com/

uuCustomized Featuresu

Display Sound

Day Mode Night Mode Bass/Treble
Balance/Fader DTS Neural Surround*
Speed Volume Compensation

Treble Midrange
Bass Subwoofer*

Features

* Not available on all models

https://manual-hub.com/

Continued 361

Features

uuCustomized Featuresu
Vehicle
362 * Not available on all models

TPMS Calibration Driver Assist System Setup
Meter Setup

Blind Spot Info* Head-up Warning* Traffic Sign Recognition System Forward Collision Warning Distance ACC Forward Vehicle Detect Beep Lane Keeping Assist Suspend Beep Road Departure Mitigation Setting Driver Attention Monitor
Language Selection Adjust Outside Temp. Display
Rear Seat Reminder* Adjust Alarm Volume
Reverse Alert Tone Config. of Instrument Panel
Fuel Efficiency Backlight "Trip A" Reset Timing "Trip B" Reset Timing Speed/Distance Units
Turn By Turn Auto Display

https://manual-hub.com/

* Not available on all models

uuCustomized Featuresu

Features

Driving Position Setup*
Keyless Access Setup
Lighting Setup
Door / Window Setup
Maintenance Info.

Memory Position Link Seat Position Movement at Entry/Exit
Door Unlock Mode Smart Entry Light Flash
Smart Entry Beep Remote Start System ON/OFF
Headlight Auto OFF Timer Interior Light Dimming Time
Auto Light Sensitivity* Auto Interior Illumination Sensitivity
Auto Headlight On with Wiper On
Auto Door Lock Key and Remote Unlock Mode
Keyless Lock Answer Back Security Relock Timer Auto Door Unlock Walk Away Auto Lock
Select Reset Items

https://manual-hub.com/

Continued 363

uuCustomized Featuresu
Camera

Rear Camera
Cross Traffic Monitor*

Fixed Guideline Dynamic Guideline

Features

364 * Not available on all models

https://manual-hub.com/

uuCustomized Featuresu

Features

List of customizable options

Setup Group

Customizable Features

Description

Selectable Settings

System Day & Time

Set Date & Time
Time Zone

Automatic Date & Time
Set Date
Set Time
Automatic Time Zone* (Select time zone)

Selects ON to have the GPS automatically adjust the clock. Select OFF to cancel this function.
Adjusts date.
2 Adjusting the Clock P. 172
Adjusts clock.
2 Adjusting the Clock P. 172
Sets the navigation system to automatically adjust the clock when driving through different time zones.
Changes the time zone manually.

ON*1/OFF -- --
ON*1/OFF --

Auto Daylight Saving Time

Select ON to have the GPS automatically adjust the clock to daylight savings time. Select OFF to cancel this function.

ON*1/OFF

Date Format

Sets the date format.

MM/DD/YYYY*1/ DD/MM/YYYY/ YYYY/MM/DD

Time Format

Selects the digital clock display from 12H to 24H. 12H*1/24H

*1:Default Setting

* Not available on all models

https://manual-hub.com/

Continued 365

uuCustomized Featuresu

Setup Group

Customizable Features

Description

Language

Changes the display language.

Touch Panel Sensitivity
System System Volumes
Config. of Instrument Panel
Security
*1:Default Setting

Sets the sensitivity of the touch panel screen.

System Volumes
Reading/ Verbal Warning Reminder

Changes the system sounds volume. Turns the verbal reminders on and off.

Select Configuration

Select which apps display on the driver information interface.

Password Unknown sources

Set the value of password display. --

Selectable Settings
English (United States)*1/Español/ Français
High/Normal*1
--
ON*1/OFF
Config.1*1/Config.2/ Config.3
ON*1/OFF ON/OFF*1

Features

366

https://manual-hub.com/

uuCustomized Featuresu

Features

Setup Group

Customizable Features

Description

Selectable Settings

Caption

Turns the subtitles on and off.

ON/OFF*1

Language Change the subtitle language.

Default*1/English (United States)/ Español/Français

Accessibility System

Text Size Caption
Caption style

Change the subtitle Text Size. Change the subtitle Caption style.

Very small/Small/ Normal*1/Large
Use app defaults*1/ White on black/ Black on white/ Yellow on black/ Yellow on blue/ Custom

Text-tospeech output

Current TTS engine TtsService

TtsService

Refuel recommend*

Turns the refuel recommend function on and off.
2 Refuel Recommend P. 407

ON*1/OFF

Status

About

Displays the Android setting items.

Legal Information

*1:Default Setting

* Not available on all models

https://manual-hub.com/

Continued 367

uuCustomized Featuresu

Setup Group

Customizable Features

Description

Factory Data Reset

Resets all the settings to their factory default.
2 Defaulting All the Settings P. 377

System

Detail Information

App Manager
Recent Location Requests Apps

Displays the Android system memory and apps information.
Displays the recent location requests from apps.

Smartphone Connection*1

Apple CarPlay Android Auto

+ Connect New Device (Saved Devices) + Connect New Device (Saved Devices)

Pairs a new phone to Apple CarPlay.
2 Phone Setup P. 386
Connects, disconnects, or deletes a paired phone.
2 Phone Setup P. 386
Pairs a new phone to Android Auto.
2 Phone Setup P. 386
Connects, disconnects, or deletes a paired phone.
2 Phone Setup P. 386

*1:Models with wireless Apple CarPlay and wireless Android Auto

Selectable Settings Continue/Cancel
-- -- -- -- -- --

Features

368

https://manual-hub.com/

uuCustomized Featuresu

Setup Group

Customizable Features

Description

Wi-Fi

Change Mode
(Available Networks/ Connected Devices)

Changes the Wi-Fi mode.
Displays the available network(s) or current connected device(s).

Connec-

tions

Bluetooth

+ Connect New Device (Saved Devices)

Pairs a new phone to HFL.
2 Phone Setup P. 386
Connects, disconnects, or deletes a paired phone.
2 Phone Setup P. 386

Smartphone Connection*2

Apple CarPlay Android Auto

Sets up the Apple CarPlay connection. Sets up the Android Auto connection.

*1:Default Setting *2:Models without wireless Apple CarPlay and wireless Android Auto

Selectable Settings Network*1/Hotspot/ OFF
--
--
--
-- --

Features

https://manual-hub.com/

Continued 369

uuCustomized Featuresu

Setup Group Display
Sound

Customizable Features

Day Mode

Night Mode

Treble

Bass/Treble

Midrange Bass

Subwoofer*

Balance/Fader

DTS Neural Surround*

Speed Volume Compensation

TPMS Calibration

Features

Vehicle

Blind Spot Info*

Driver Assist System Setup

Head-up Warning*
Traffic Sign Recognition System

*1:Default Setting 370 * Not available on all models

Description
Adjusts the settings of the audio/information screen.
2 Display Setup P. 280

Selectable Settings --

Adjusts the settings of the audio speakers'

sound.

2 Adjusting the Sound P. 279

Cancels/Calibrates the tire pressure monitoring system (TPMS).
Changes the setting for the blind spot information.
Turns the head-up warning on and off.
Select On/Off to indicate small displaying traffic sign icon on the driver information interface and the head-up display*.

Calibrate/Cancel
Audible And Visual Alert*1/Visual Alert ON*1/OFF
Small Icons ON*1/ Small Icons OFF

https://manual-hub.com/

uuCustomized Featuresu

Features

Setup Group

Customizable Features
Forward Collision Warning Distance

ACC Forward Vehicle Detect Beep

Vehicle

Driver Assist System Setup

Lane Keeping Assist Suspend Beep
Road Departure Mitigation Setting

Driver Attention Monitor

Language Selection

Meter Setup

Adjust Outside Temp. Display

*1:Default Setting

Rear Seat Reminder*

Description

Selectable Settings

Changes Collision Mitigation Braking System (CMBS) alert distance.

Normal*1/Short/ Long

Causes the system to beep when the system detects a vehicle, or when the vehicle goes out of the ACC with Low Speed Follow range.

ON/OFF*1

Causes the system to beep when Lane Keeping Assist System (LKAS) is suspended.

ON/OFF*1

Changes the setting for the road departure mitigation system.

Normal*1/Wide/ Warning Only/ Narrow

Changes the setting for the driver attention monitor.

OFF/Tactile Alert/ Tactile And Audible Alert*1

Changes the display language.

English*1/Français/ Español

Adjusts the temperature reading by a few degrees.

-5°F ~ ±0°F*1 ~ +5°F (U.S.) -3°C ~ ±0°C*1 ~ +3°C (Canada)

Turns the Rear Seat Reminder feature on and off. ON*1/OFF

* Not available on all models

https://manual-hub.com/

Continued 371

uuCustomized Featuresu

Features

Setup Group

Customizable Features
Adjust Alarm Volume
Reverse Alert Tone Config. of Instrument Panel Fuel Efficiency Backlight

Vehicle Meter Setup

"Trip A" Reset Timing

"Trip B" Reset Timing

*1:Default Setting

Speed/Distance Units
Turn By Turn Auto Display

Description

Selectable Settings

Changes the alarm volume, such as the buzzers, warnings, turn signal sound, and so on.
Turns the reverse alert tone on and off.
Select which apps display on the driver information interface.

High/Mid*1/Low
ON*1/OFF Config.1*1/Config.2/ Config.3

Turns the ambient meter feature on and off.

ON*1/OFF

Changes the setting of how to reset trip meter A and average fuel economy A.
Changes the setting of how to reset trip meter B and average fuel economy B.
Selects the trip computer units.
Selects whether the turn-by-turn display comes on during the route guidance.

When Fully Refueled/Manually Reset*1/IGN OFF
When Fully Refueled/Manually Reset*1/IGN OFF
km/h · km/mph · miles*1 (U.S.) km/h · km*1/mph · miles (Canada)
ON*1/OFF

372

https://manual-hub.com/

uuCustomized Featuresu

Setup Group

Customizable Features

Description

Selectable Settings

Driving Position Setup*

Memory Position Link
Seat Position Movement at Entry/ Exit

Turns the driving position memory system on and off.
Moves the seat rearward when you get in/get out of the vehicle. Changes the setting for this feature.

ON*1/OFF ON*1/OFF

Vehicle

Keyless Access Setup

Door Unlock Mode Smart Entry Light Flash Smart Entry Beep

Changes which doors to unlock when you grab the driver's door handle.
Causes some exterior lights to flash when you unlock/lock the doors.
Causes the beeper to sound when you unlock/ lock the doors.

Driver Door Only*1/ All Doors ON*1/OFF
ON*1/OFF

Remote Start System ON/OFF

Turns the remote engine start feature on and off. ON*1/OFF

*1:Default Setting

Features

* Not available on all models

https://manual-hub.com/

Continued 373

uuCustomized Featuresu

Setup Group

Customizable Features

Description

Selectable Settings

Headlight Auto OFF Timer

Changes the length of time the exterior lights stay on after you close the driver's door.

0 sec/15 sec*1/30 sec/ 60 sec

Interior Light Dimming Changes the length of time the interior lights stay 15 sec/30 sec*1/60

Time

on after you close the doors.

sec

Vehicle

Lighting Setup

Auto Light Sensitivity*
Auto Interior Illumination Sensitivity

Changes the timing for the headlights to come on.
Changes the sensitivity of the brightness of the instrument panel when the headlight switch is in AUTO.

Min/Low/Mid*1/ High/Max
Min/Low/Mid*1/ High/Max

Auto Headlight On with Wiper On

Used to automatically come on the headlights when the wipers are used several times within a certain number of intervals with the headlight switch is in AUTO.

ON*1/OFF

*1:Default Setting

Features

374 * Not available on all models

https://manual-hub.com/

uuCustomized Featuresu

Features

Setup Group

Customizable Features Auto Door Lock

Key and Remote Unlock Mode
Keyless Lock Answer Back

Vehicle

Door/Window Security Relock Timer Setup

Auto Door Unlock

Walk Away Auto Lock

Maintenance Info.
*1:Default Setting

Select Reset Items

Description

Selectable Settings

Changes the setting for the automatic locking feature. Sets up either the driver's door or all doors to unlock on the first push of the keyless remote or built-in key. LOCK/UNLOCK- The exterior lights flash. LOCK (2nd push)- The beeper sounds. Changes the time it takes for the doors to relock and the security system to set after you unlock the vehicle without opening any door.
Changes the setting for when the doors unlock automatically.
Changes the settings for the auto lock function when you walk away from the vehicle. Resets the engine oil life display when you have performed the maintenance service.

OFF/With Vehicle Speed*1/Shift From P
Driver Door Only*1/ All Doors
ON*1/OFF
30 sec*1/60 sec/90 sec
OFF/All Doors When Driver's Door Opens*1/All Doors When Shifted to Park/All Doors with IGN OFF
ON/OFF*1
--

https://manual-hub.com/

Continued 375

uuCustomized Featuresu

Setup Group

Customizable Features

Rear Camera Camera

Fixed Guideline Dynamic Guideline

Cross Traffic Monitor* *1:Default Setting

Description

Selectable Settings

Selects whether the guidelines come on the rear camera monitor.
2 Multi-View Rear Camera P. 523
Selects whether the guidelines come on the rear camera monitor.
2 Multi-View Rear Camera P. 523
Turns the cross traffic monitor on and off.

ON*1/OFF ON*1/OFF ON*1/OFF

Features

376 * Not available on all models

https://manual-hub.com/

uuCustomized FeaturesuDefaulting All the Settings

Defaulting All the Settings

Reset all the menu and customized settings as the factory defaults.
Defaulting System Settings

1Defaulting All the Settings
When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.

1. Press the button. 2. Select Settings. 3. Select System. 4. Select Factory Data Reset.
u A confirmation message appears on the screen.
5. Select Continue to reset the settings. 6. Select Continue again to reset the settings.
u The system will reboot.

If you perform Factory Data Reset, it will reset the preinstalled apps to their factory default.
If you perform Factory Data Reset, you cannot use the HondaLink® because it goes offline.
2 HondaLink® P. 308

Defaulting Vehicle Settings
1. Press the button. 2. Select Settings. 3. Select Vehicle. 4. Select Default. 5. Select Yes.

Features

https://manual-hub.com/

377

HomeLink® Universal Transceiver*

The HomeLink® Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.
Important Safety Precautions
Refer to the safety information that came with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.
Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage.

1HomeLink® Universal Transceiver*
Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an "electronic eye," or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it.
NOTE: Some LED lightbulbs installed in the garage door opener can interfere with the training and consistent operation of your HomeLink device. Please consider use of Low RF interference bulbs in your garage door opener.

When programming a garage door opener, park just outside the garage door's path.

Features

378 * Not available on all models

https://manual-hub.com/

uuHomeLink® Universal Transceiver*uTraining HomeLink

Training HomeLink
Indicator I HomeLink Button
III HomeLink Button

If it is necessary to erase a previously entered learned code: · Press and hold the I and III HomeLink
buttons for about 10 seconds, until the green indicator blinks. Release the buttons, and proceed to step 1. · If you are training the second or third button, go directly to step 1.

The instructions on the next page should work for most gate or garage openers, but may not work for all. For detailed instructions about your specific remote opener, visit http://www.homelink.com or call (800) 355-3515.

Features

Continued
https://manual-hub.com/

379

uuHomeLink® Universal Transceiver*uTraining HomeLink

Programming a Button
1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the HomeLink® button you want to program.

Features

2. Press and hold the desired HomeLink button. Is the HomeLink indicator (LED) slowly flashing orange?

YES

3a. Hold the button on the remote transmitter. Does HomeLink indicator (LED) change from slowly flashing orange to rapidly flashing green or continuously on green? The process should take less than 60 seconds.
4. Press and hold the programmed HomeLink button for about a second. Does the device (garage door opener) work?

3b. Canadian Garage Door Opener A. Press and release the HomeLink button. Press, hold and release the button on the remote every 2 secs. Does the HomeLink indicator (LED) change from slowly flashing orange to rapidly flashing or continuously on green? The process should take less than 60 seconds.

YES

Training Complete

5. Press and hold the HomeLink button again.

HomeLink LED is continuously on green.

HomeLink indicator rapidly flashes green.

6. Press and hold the HomeLink button again. The remote-controlled device should operate.
Training Complete
380

5a. The remote has a rolling code. Press the "learn" button on the remote-controlled device (e.g. garage door opener).
5b. Within 30 secs, press and hold the programmed HomeLink button for 2 secs.
https://manual-hub.com/

1Training HomeLink
Reprogramming a Button If you want to retrain a programmed button for a new device, you do not have to erase all button memory. You can replace the existing memory code using this procedure:
1. Press and hold the desired HomeLink button until the HomeLink indicator begins to slowly flash orange. This should take about 20 seconds.
2. Release the HomeLink button and position the remote transmitter you wish to link 1 - 3 inches (3 - 8 cm) from the HomeLink button you want to program, then follow steps 3 - 6 under "programming a button."
Erasing Button Memory To erase programming from the buttons, press and hold the two outside HomeLink buttons until the HomeLink indicator changes from orange to rapidly flashing green. This should take about 10 seconds. You should erase all programming before selling the vehicle.
Operating To operate, simply press and release the programmed HomeLink button. Activation will now occur for the trained device.
Questions For questions or comments, visit www.HomeLink.com, www.youtube.com/ HomeLinkGentex, or by calling the HomeLink Hotline (North America only) at (800) 355-3515.
HomeLink® is a registered trademark of Gentex Corporation.

Bluetooth® HandsFreeLink®

Features

Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using 1Bluetooth® HandsFreeLink®

your vehicle's audio system, without handling your cell phone.

Place your phone where you can get good reception.

Using HFL
HFL Buttons
VOL(+/VOL(- (Volume) Buttons (home) Button Left Selector Wheel

To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:
· U.S.: Visit automobiles.honda.com/handsfreelink/,
or call 1-888-528-7876.
· Canada: For more information on smartphone
compatibility, call 1-855-490-7351.
To use the system, the Bluetooth setting must be ON.
2 Phone Setup P. 386

(Back) Button (Talk) Button (Hang-up) Button (Pick-up) Button

Voice control tips
· Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere with the microphones.
· Press the button when you want to call a
number using a phonebook name or a number. Speak clearly and naturally after a beep.
· If the microphones pick up voices other than yours,
the command may be misinterpreted.
· To change the volume level, select the audio
system's VOL (Volume) or use the remote audio controls on the steering wheel.
If there is no favorite contact entry in the system, the pop-up notification appears on the screen.
2 Favorite Contacts P. 392

Continued
https://manual-hub.com/

381

uuBluetooth® HandsFreeLink®uUsing HFL

(Pick-up) button: Press to go directly to the phone menu on the driver information interface, or to answer an incoming call.
(Hang-up) button: Press to end a call. (Back) button: Press to go back to the previous screen, or cancel a command. (Talk) button: Press to access Voice Portal. Left Selector Wheel: Press the (home) button, then roll up or down to select Phone on the driver information interface, and then press the left selector wheel. (home) button: Press to go back to the home screen of the driver information interface.
To go to the phone screen of the driver information interface: 1. Press the (home) button on the steering wheel. 2. Roll up or down the left selector wheel to select Phone, then push the left
selector wheel. u You can select Favorite Contacts or Recent Calls.

1Bluetooth® HandsFreeLink®
Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motor Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.

Features

382

https://manual-hub.com/

uuBluetooth® HandsFreeLink®uUsing HFL

HFL Status Display
The audio/information screen notifies you when there is an incoming call.

Bluetooth Indicator Appears when your phone is connected to HFL. HFL Mode

Signal Strength Battery Level Status

1HFL Status Display
The information that appears on the audio/ information screen varies between phone models.

Caller's Name (If registered)/ Caller's Number (If not registered)
Limitations for Manual Operation*
Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored phonebook names or numbers can be called using voice commands while the vehicle is in motion.
2 Favorite Contacts P. 392

Features

* Not available on all models

https://manual-hub.com/

383

uuBluetooth® HandsFreeLink®uHFL Menus

HFL Menus
The power mode must be in ACCESSORY or ON to use the system.

Phone settings screen

1. Press the button. 2. Select Phone. 3. Select Settings.

1HFL Menus To use HFL, you must first pair your Bluetoothcompatible cell phone to the system while the vehicle is parked.
Some functions are limited while driving.

Features

Change Devices

+ Connect New Device Pair a new phone to the system. (Existing entry list) Connect, disconnect, or delete a paired device.

Auto Sync Phone

Set phonebook and call history data to be automatically imported when a phone is paired to HFL.

Auto Phone Call Transfer Set calls to automatically transfer from your phone to HFL when you enter the vehicle.

Ringtone

Select the ringtone.

HondaLink Assist*

Turn HondaLink® Assist on and off.

384 * Not available on all models

https://manual-hub.com/

Phone menu screen

1. Press the button. 2. Select Phone.

uuBluetooth® HandsFreeLink®uHFL Menus

Recent Calls

All Dialed Missed Received

Display the last outgoing, incoming and missed calls. Display the last outgoing calls. Display the last missed calls. Display the last incoming calls.

Favorite Contacts

(Existing entry list) Dial the selected number in the speed dial list.

Contacts

Display the paired phone's phonebook.

Keypad

Enter a phone number to dial.

Continued
https://manual-hub.com/

Features

385

uuBluetooth® HandsFreeLink®uHFL Menus

Phone Setup

Bluetooth® setup You can turn Bluetooth® function on and off. 1. Press the button. 2. Select Settings. 3. Select Connections. 4. Select Bluetooth. 5. Select Options. 6. Select Bluetooth, then ON.

Features

386

https://manual-hub.com/

uuBluetooth® HandsFreeLink®uHFL Menus

To pair a cell phone (when there is no phone paired to the system)
1. Press the button. 2. Select Phone. 3. Select Connect Phone. 4. Make sure your phone is in search or
discoverable mode, then select + Connect New Device. u HFL automatically searches for a
Bluetooth® device. 5. Select your phone when it appears on the
list. u If your phone still does not appear,
search for Bluetooth® devices using your phone. From your phone, search for HandsFree Link. 6. The system gives you a pairing code on the audio/information screen. u Confirm if the pairing code on the screen and your phone match. This may vary by phone. 7. Select desired functions and then select Connect.

1Phone Setup Your Bluetooth-compatible phone must be paired to the system before you can make and receive handsfree calls.
Phone Pairing Tips:
· You cannot pair your phone while the vehicle is
moving.
· Up to six phones can be paired. · Your phone's battery may drain faster when it is
paired to the system.
Once you have paired a phone, you can see it displayed on the screen with one or more icons on the right side. These icons indicate the following:
: The phone is compatible with Bluetooth® Audio. : The phone can be used with HFL. *: The phone is compatible with Apple CarPlay. *: The phone is compatible with Android Auto.
If there is an active connection to Apple CarPlay or Android Auto, pairing of additional Bluetoothcompatible devices is unavailable.

Features

* Not available on all models

Continued
https://manual-hub.com/

387

uuBluetooth® HandsFreeLink®uHFL Menus

To change the currently paired phone 1. Go to the phone settings screen.
2 Phone settings screen P. 384
2. Select Change Devices. 3. Select a phone to connect.
u HFL disconnects the connected phone and starts searching for another paired phone.
4. Select , , * or *. u and can be selected simultaneously, however, when * or * is selected, and cannot be selected.
5. Select Apply.

1To change the currently paired phone If no other phones are found or paired when trying to switch to another phone, HFL will inform you that the original phone is connected again.
To pair other phones, select + Connect New Device from the Bluetooth screen.

Features

388 * Not available on all models

https://manual-hub.com/

To delete a paired phone 1. Go to the phone settings screen.
2 Phone settings screen P. 384
2. Select Change Devices. 3. Select a phone you want to delete.

uuBluetooth® HandsFreeLink®uHFL Menus

4. Select Delete. 5. A confirmation message appears on the
screen. Select Yes.

Features

Continued
https://manual-hub.com/

389

uuBluetooth® HandsFreeLink®uHFL Menus
Ringtone
You can change the ringtone setting. 1. Go to the phone settings screen.
2 Phone settings screen P. 384
2. Select Ringtone. 3. Select Vehicle or Phone.

1Ringtone
Vehicle: The fixed ringtone sounds from the speakers. Phone: Depending on the make and model of the cell phone, the ringtone stored in the phone will sound if the phone is connected.

Automatic Transferring
If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL.
1. Go to the phone settings screen.
2 Phone settings screen P. 384
2. Select Auto Phone Call Transfer. 3. Select ON or OFF.

Features

390

https://manual-hub.com/

uuBluetooth® HandsFreeLink®uHFL Menus

Automatic Import of Cellular Phonebook and Call History
When Auto Sync Phone is set to ON: When your phone is paired, the contents of its phonebook and call history are automatically imported to the system.

1Automatic Import of Cellular Phonebook and Call History On some phones, you will be asked to allow your cellular phonebook to be imported.
When you select a name from the list in the cellular phonebook, you can see a category icon. The icons indicate what types of numbers are stored for that name.

Changing the Auto Sync Phone setting 1. Go to the phone settings screen.
2 Phone settings screen P. 384
2. Select Auto Sync Phone. 3. Select ON or OFF.

Mobile Home Pager Car Pref

Work Other Fax Voice

On some phones, it may not be possible to import the category icons to the system.
The phonebook is updated after every connection. Call history is updated after every connection or call.

Features

Continued
https://manual-hub.com/

391

uuBluetooth® HandsFreeLink®uHFL Menus

Favorite Contacts
Recent Calls Screen
Star Icon Contacts Screen

To store a number as a favorite contact: 1. Go to the phone menu screen.
2 Phone menu screen P. 385
2. Select the Recent Calls, Contacts, or Keypad screen.
3. Select the star icon. u A notification appears on the screen if the favorite contact is successfully stored. u To remove the favorite contact, select the star icon again.

Keypad Screen

Star Icon

Features

Star Icon
392

https://manual-hub.com/

To edit a favorite contact 1. Go to the phone menu screen.
2 Phone menu screen P. 385
2. Select Favorite Contacts. 3. Select Edit on the favorite contact entry
you want to edit. 4. Select a setting you want. 5. Select Save.
To delete a favorite contact 1. Go to the phone menu screen.
2 Phone menu screen P. 385
2. Select Favorite Contacts. 3. Select Edit on the favorite contact entry
you want to delete. 4. Select Remove. 5. A confirmation message appears on the
screen. Select Yes.

uuBluetooth® HandsFreeLink®uHFL Menus

Features

Continued
https://manual-hub.com/

393

uuBluetooth® HandsFreeLink®uHFL Menus

Making a Call

You can make calls by inputting any phone number, or by using the imported phonebook, call history, or favorite contact entries.

1Making a Call Once a call is connected, you can hear the voice of the person you are calling through the audio speakers.
While there is an active connection with Apple CarPlay, phone calls cannot be made with HandsFreeLink® and are only made from Apple CarPlay.

Features

394

https://manual-hub.com/

To make a call using the imported phonebook
1. Go to the phone menu screen.
2 Phone menu screen P. 385
2. Select Contacts. 3. Select a name.
u You can sort by First Name or Last Name. Select the icon on the upper right of the screen.
4. Select a number. u Dialing starts automatically.
To make a call using a phone number 1. Go to the phone menu screen.
2 Phone menu screen P. 385
2. Select Keypad. 3. Select a number.
u Use the keyboard on the touch screen for entering numbers.
4. Select Call. u Dialing starts automatically.

uuBluetooth® HandsFreeLink®uHFL Menus

Features

Continued
https://manual-hub.com/

395

uuBluetooth® HandsFreeLink®uHFL Menus

To make a call using the call history Call history is stored by All, Dialed, Missed, and Received. 1. Go to the phone menu screen.
2 Phone menu screen P. 385
2. Select Recent Calls. u You can sort by All, Dialed, Missed, or Received. Select the icon on the upper right of the screen.
3. Select a number. u Dialing starts automatically.
To make a call using a favorite contact entry
1. Go to the phone menu screen.
2 Phone menu screen P. 385
2. Select Favorite Contacts. u You can change the order of favorite contact entries by selecting Reorder.
3. Select a number. u Dialing starts automatically.

1To make a call using the call history
The call history appears only when a phone is connected to the system.

Features

396

https://manual-hub.com/

uuBluetooth® HandsFreeLink®uHFL Menus

Receiving a Call

When there is an incoming call, an audible notification sounds (if activated) and the Incoming Call... screen appears.

Press the Press the call.

button to answer the call. button to decline or end the

1Receiving a Call Call Waiting Press the button to put the current call on hold to answer the incoming call. Press the button again to return to the current call.
Select Ignore to ignore the incoming call if you do not want to answer it. Press the button if you want to hang up the current call.
You can select the icons on the audio/information screen instead of the and buttons.

Options During a Call

The following options are available during a call.

Mute: Mute your voice.

Use Handheld: Transfer a call from the system to your phone.

Keypad: Send numbers during a call. This is useful when you call a menu-driven

phone system.

Mute Icon

The available options are shown on the lower half of the screen.

1Options During a Call
You can select the icons on the audio/information screen.

Select the option. u The mute icon appears when Mute is selected. Select Mute again to turn it off.

Features

Continued
https://manual-hub.com/

397

uuBluetooth® HandsFreeLink®uHFL Menus

To Set Up Text Message Options
To turn on or off the text message notice
1. Press the button. 2. Select Messages. 3. Select Settings. 4. Select Pop-up Notification. 5. Select ON or OFF.

1To Set Up Text Message Options To use the text message function, it may be necessary to set up on your phone.
1To turn on or off the text message notice ON: A pop-up notification comes on every time you receive a new message. OFF: The message you receive is stored in the system without notification.

Features

398

https://manual-hub.com/

uuBluetooth® HandsFreeLink®uHFL Menus

Receiving a Text Message
HFL can display newly received text messages as well as the last 20 messages received on a linked cell phone. Each received message can be read aloud and replied to using a fixed common phrase.
1. Select the system status icon. u The status area appears.
2. A pop-up appears and notifies you of a new text message.
3. Select Open to display the message. u The text message is displayed.
4. Select Play to listen to the message. To discontinue the message read-out, select Stop.

1Receiving a Text Message Some cell phones might not be able to read the transmission log of data sent and data received.
The system does not display any received messages while you are driving. You can only hear them read aloud.
The system can only receive messages that are sent as text (SMS) messages. The message sent using the data services will not be displayed in the list.
With some phones, you may be able to display up to 20 of the last text messages received.
State or local laws may limit your use of the HFL text message feature. Only use the text message feature when conditions allow you to do so safely.

Features

Continued
https://manual-hub.com/

399

uuBluetooth® HandsFreeLink®uHFL Menus

Selecting a Phone
You can select one from the Bluetooth® device list to be active and receive notifications.
1. Press the button. 2. Select Messages. 3. Select Settings. 4. Select Change Connected Phone. 5. Change a desired phone.
2 To change the currently paired phone P. 388

1Selecting a Phone
You can only receive notifications from one phone at a time.

Features

400

https://manual-hub.com/

Displaying Messages
Message List

1. Press the button. 2. Select Messages.
u Select a phone if necessary. 3. Select a message.
u The text message is displayed.

Text Message

uuBluetooth® HandsFreeLink®uHFL Menus
1Displaying Messages The (blue) icon appears next to an unread message.
If you delete a message on the phone, the message will also be deleted from the system. If you send a message from the system, the message goes to your phone's outbox.
To see the previous or next message, select Prev. or Next on the message screen.

Features

Continued
https://manual-hub.com/

401

uuBluetooth® HandsFreeLink®uHFL Menus

Read or Stop reading a message 1. Go to the text message screen. 2. Select Play.
u The system starts reading the message aloud.
3. Select Stop to stop reading. Select Play again to start reading the message.
Reply to a message 1. Go to the text message screen. 2. Select Reply. 3. Select the reply message.
u The pop-up menu appears on the screen. 4. Select Send to send the message.
u Message sent. appears on the screen when the reply message was successfully sent.

1Reply to a message
The available fixed reply messages are as follows:
· Talk to you later, I'm driving. · I'm on my way. · I'm running late. · OK · Yes · No
The default reply messages are displayed only in English. If you want to use reply messages in languages other than English, please edit them.
2 To edit a reply message P. 403
You can add a reply message by selecting + Create New Message.
2 To edit a reply message P. 403
Only certain phones receive and send messages when paired and connected. For a list of compatible phones:
· U.S.: Visit automobiles.honda.com/handsfreelink/,
or call 1-888-528-7876.
· Canada: For more information on smartphone
compatibility, call 1-855-490-7351.

Features

402

https://manual-hub.com/

uuBluetooth® HandsFreeLink®uHFL Menus

To edit a reply message 1. Press the button. 2. Select Messages. 3. Select Settings. 4. Select Edit Replies. 5. Select the reply message you want to edit
or + Create New Message. u The on-screen keyboard screen is
displayed. 6. Enter a reply message, and then select
Save.

1To edit a reply message
You can change the order of reply messages by selecting Reorder.

To delete a reply message 1. Press the button. 2. Select Messages. 3. Select Settings. 4. Select Delete Replies. 5. Select on the reply message you want to
delete. u The pop-up menu appears on the screen. 6. Select Yes.

Features

Continued
https://manual-hub.com/

403

uuBluetooth® HandsFreeLink®uHFL Menus
Making a call to a sender 1. Go to the text message screen. 2. Select Call.

Features

404

https://manual-hub.com/

uuBluetooth® HandsFreeLink®uHondaLink® Assist*

HondaLink® Assist*
In Case of Emergency
Automatic collision notification If your vehicle's airbags deploy or if the unit detects that the vehicle is severely impacted, your vehicle automatically will attempt to connect to the HondaLink® operator. If connected, information about your vehicle, its location, and its condition can be sent to the operator*1; you also can speak to the operator when connected.
IMPORTANT: For vehicles equipped with HondaLink® Assist, owner activation constitutes authorization for Honda to collect information from your vehicle needed to provide the service, and agreement to the Terms of Use at www.hondalink.com/ TermsAndConditions. In a crash, HondaLink® Assist will attempt to notify emergency services but NEITHER HONDA NOR ITS SERVICE PROVIDERS GUARANTEE THAT SUCH NOTIFICATION WILL OCCUR.
Honda reserves the right to terminate HondaLink® Assist services at any time or for any reason, and in the future may not be able to provide services due to changes in, or obsolescence of, technology integral to the service or changes in governmental regulation.

1HondaLink® Assist* HondaLink® Assist also provides services you can operate from the Internet or your smartphone.
To subscribe to HondaLink® Assist, or to get more information about all of its features, contact a Honda dealer, or visit hondalink.honda.com
1In Case of Emergency Your vehicle may not be able to connect to the operator if the battery level is low, the line is disconnected, or you do not have adequate cellular coverage.
You cannot use this emergency services when:
· You travel outside the HondaLink® service coverage
areas.
· There is a problem with the connecting devices,
such as the microphones, speakers, or the unit itself.
· HondaLink Assist is not enabled.
2 To enable notification P. 406
You cannot operate other phone-related functions using the screen while talking to the operator. Only the operator can terminate the connection to your vehicle.

Features

*1: Depending on your phone and adequate cellular coverage, your vehicle's location may not be sent to the operator.

* Not available on all models

Continued

1Automatic collision notification
If the unit fails to connect to the operator, it repeatedly tries until it succeeds.

https://manual-hub.com/

405

uuBluetooth® HandsFreeLink®uHondaLink® Assist*

To enable notification

1. Go to the phone settings screen.
2 Phone settings screen P. 384
2. Select HondaLink Assist. 3. Select Yes or No.

1To enable notification
Setting options:
· Yes: Notification is available. · No: Disable the feature.

Features

406

https://manual-hub.com/

Refuel Recommend

Models with navigation system
Your vehicle is equipped with a feature that automatically calculates when to refuel. This feature will notify you when refueling is recommended as well as enable you to search for gas stations that are located in the vicinity of your vehicle.
1. When it is time to refuel the vehicle, a notification is displayed and a notification icon is displayed in the header.
2. Touch the box that contains the icon.

1Refuel Recommend You can turn the Refuel Recommend function on and off. 2 Customized Features P. 357
When you turn off this feature, the refuel recommend notification will not display.
This feature can only be used when the fuel level in the tank is below 30 percent.

Notification Icon

3. Select Find Gas Station Now.

If you select Find Gas Station Now or put more than 5 liters of gasoline into the fuel tank, the notification for refueling will disappear. If you prefer not to be notified, select OFF in the settings for Refuel Recommend.

When you drive on a rough road or ascend or descend a hill for an extended period of time, the notification may disappear or may not be displayed at all.

Features

4. Choose a gas station from the search screen of the navigation system. u For instructions on how to use the navigation system, refer to the navigation system manual.
https://manual-hub.com/

407

This page intentionally left blank.

408

https://manual-hub.com/

Driving
This chapter discusses driving and refueling.

Before Driving................................... 410 Towing a Trailer................................ 415 When Driving
Turning on the Power ...................... 416 Precautions While Driving................. 422 Transmission .................................... 422 Shifting ............................................ 423 SPORT Mode.................................... 429 Deceleration Paddle Selector ............ 430 ECON Mode .................................... 433 Acoustic Vehicle Alerting System...... 434 Adaptive Damper System* ............... 434 Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System .............. 435
* Not available on all models

Agile Handling Assist ....................... 437 Tire Pressure Monitoring System (TPMS) .. 438 Tire Pressure Monitoring System (TPMS) -
Required Federal Explanation ......... 441 Blind spot information System* ........... 443 High Voltage Battery........................ 446 Honda Sensing® Collision Mitigation Braking SystemTM
(CMBSTM) ....................................... 450 Low Speed Braking Control*............ 459 Adaptive Cruise Control (ACC) with Low
Speed Follow ................................. 464
https://manual-hub.com/

Lane Keeping Assist System (LKAS) .. 480 Road Departure Mitigation (RDM) System .. 488 Traffic Sign Recognition System ....... 493 Front Sensor Camera ....................... 499 Radar Sensor ................................... 501 Sonar Sensors* ................................ 502 Braking Brake System ................................... 503 Anti-lock Brake System (ABS) ........... 510 Brake Assist System ......................... 511 Parking Your Vehicle........................ 512 Multi-View Rear Camera.................. 523 Refueling........................................... 525
Fuel Economy and CO2 Emissions.... 528

409

Before Driving

Driving Preparation
Check the following items before you start driving.

Exterior Checks
· Make sure there are no obstructions on the windows, door mirrors, exterior lights, or other parts of the vehicle. u Remove any frost, snow, or ice. u Remove any snow on the roof, as this can slip down and obstruct your field of vision while driving. If frozen solid, remove ice once it has softened. u When removing ice from around the wheels, be sure not to damage the wheel or wheel components.
· Make sure the hood is securely closed. u If the hood opens while driving, your front view will be blocked.
· Make sure the tires are in good condition. u Check air pressures, and check for damage and excessive wear.
2 Checking and Maintaining Tires P. 564
· Make sure there are no people or objects behind or around the vehicle. u There are blind spots from the inside.

1Exterior Checks
NOTICE When doors are frozen shut, use warm water around the door edges to melt any ice. Do not try to force them open, as this can damage the rubber trim around the doors. When done, wipe dry to avoid further freezing.
Do not pour warm water into the key cylinder. You will be unable to insert the key if the water freezes in the hole.
Heat from the engine and exhaust can ignite flammable materials left under the hood, causing a fire. If you've parked your vehicle for an extended period, inspect and remove any debris that may have collected, such as dried grass and leaves that have fallen or have been carried in for use as a nest by a small animal. Also, check under the hood for leftover flammable materials after you or someone else has performed maintenance on your vehicle.

Driving

410

https://manual-hub.com/

uuBefore DrivinguDriving Preparation

Interior Checks
· Store or secure all items on board properly. u Carrying too much cargo, or improperly storing it, can affect your vehicle's handling, stability, stopping distance, and tires, and make it unsafe.
2 Maximum Load Limit P. 413
· Do not pile items higher than the seat height. u They can block your view and may be thrown forward in the event of sudden braking.
· Do not place anything in the front seat footwells. Make sure to secure the floor mat. u An object or unsecured floor mat can interfere with your brake and accelerator pedal operation while driving.
· If you have any animals on board, do not let them move around in the vehicle. u They may interfere with driving and a crash could occur.
· Securely close and lock all doors and the trunk.
2 Locking/Unlocking the Doors from the Inside P. 183
· Adjust your seating position properly. u Adjust the head restraint, too.
2 Seats P. 218 2 Adjusting the Front and Rear Outer Head Restraint Positions P. 225
· Adjust the mirrors and steering wheel properly. u Adjust them while sitting in the proper driving position.
2 Mirrors P. 216 2 Adjusting the Steering Wheel P. 215

1Interior Checks
The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk, have the aiming readjusted at a dealer or by a qualified technician.

Driving

Continued
https://manual-hub.com/

411

uuBefore DrivinguDriving Preparation
· Be sure items placed on the floor behind the front seats cannot roll under the seats. u They can interfere with the driver's ability to operate the pedals, the operation of the seats, or the operation of the sensors under the seats.
· Everyone in the vehicle must fasten their seat belt.
2 Fastening a Seat Belt P. 49
· Make sure that the indicators in the instrument panel come on when you start the vehicle, and go off soon after. u Always have a dealer check the vehicle if a problem is indicated.
2 Indicators P. 88

Driving

412

https://manual-hub.com/

uuBefore DrivinguMaximum Load Limit

Maximum Load Limit
The maximum load for your vehicle is 850 lbs (385 kg). See the Tire and Loading Information label attached to the driver's doorjamb.
Label Example

1Maximum Load Limit
3 WARNING
Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.
Follow all load limits and other loading guidelines in this manual.

Driving

This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.
Steps for Determining Correct Load Limit (1) Locate the statement "The combined weight of occupants and
cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. (2) Determine the combined weight of the driver and passengers that will be riding in your vehicle. (3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. (4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400 - 750 (5 x 150) = 650 lbs.)

Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories and all cargo.
2 Specifications P. 626
Gross Axle Weight Rating (GAWR): The maximum allowable weight of the vehicle axle.
2 Specifications P. 626

Continued

413

https://manual-hub.com/

uuBefore DrivinguMaximum Load Limit

(5) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4.
(6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.

1Maximum Load Limit
Towing a Trailer: See Towing a Trailer to determine whether your vehicle is designed to tow a tailer.
2 Towing a Trailer P. 415

In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver's doorjamb.

Load Limits Example

Example1

Example2

Max Load 850 lbs (385 kg)

Passenger Weight 150 lbs x 2 = 300 lbs (68 kg x 2 = 136 kg)

Cargo Weight 550 lbs (249 kg)

Driving

414

Max Load 850 lbs (385 kg)

Passenger Weight 150 lbs x 5 = 750 lbs (68 kg x 5 = 340 kg)

Cargo Weight 100 lbs (45 kg)

https://manual-hub.com/

Towing a Trailer
Your vehicle is not designed to tow a trailer. Attempting to do so can void your warranties.
Towing Behind a Motorhome
Your vehicle is not designed to be towed behind a motor home. If your vehicle needs to be towed in an emergency, refer to the emergency towing information.
2 Emergency Towing P. 620

Driving

https://manual-hub.com/

415

When Driving

Turning on the Power
1. Make sure the parking brake is applied. u The parking brake and brake system indicator (red) comes on for 30 seconds when you pull up the electric parking brake switch.

Electric Parking Brake Switch Brake Pedal

2. Depress the brake pedal.

1Turning on the Power Keep your foot firmly on the brake pedal when starting the power system.
The engine is harder to start in cold weather and in thinner air found at altitudes above 8,000 feet (2,400 meters).
When turning on the power system in cold weather, turn off all electrical accessories such as the lights, climate control system, and rear defogger in order to reduce the 12-volt battery drain.
If you live in a region where winter is extremely cold, an engine block heater will improve starting and warming of the engine. Consult a dealer for details.
If the exhaust system sounds abnormal or you can smell exhaust gas inside the vehicle, have your vehicle checked by a dealer. There may be a problem with the engine or exhaust system.

Driving

416

https://manual-hub.com/

uuWhen DrivinguTurning on the Power

3. Without depressing the accelerator pedal, press the POWER button while depressing the brake pedal.
4. Check the READY indicator. u Keep depressing the brake pedal until the READY indicator comes on. u The READY indicator comes on when the power system is on and you can start driving. u If the outside temperature is extremely low, you cannot drive until conditions are improved. In this case, the READY indicator does not come on and a warning message appears on the driver information interface.
2 Driver Information Interface Warning and Information Messages
P. 115

1Turning on the Power The immobilizer system protects your vehicle from theft. If an improperly coded device is used, the power system does not activate. 2 Immobilizer System P. 190
When you set the power mode to ON, you may feel the brake pedal slightly sink down. This is normal.
Bring the keyless remote close to the POWER button if the battery in the keyless remote is weak.
2 If the Keyless Remote Battery is Weak P. 602
The power system may not activate if the keyless remote is subjected to strong radio waves.
Do not hold the POWER button to start the power system. If the power system does not start, wait at least 30 seconds before trying again.

The engine may not run when the vehicle is ready for driving. You can start driving with the READY indicator on. If you press the POWER button while depressing the brake pedal with the READY indicator on, the power mode is set to VEHICLE OFF and you cannot start driving.
2 READY Indicator P. 94

Driving

Continued
https://manual-hub.com/

417

uuWhen DrivinguTurning on the Power

Remote Engine Start
You can remotely turn the power system on using the keyless remote.

To turn the power system on

Press the

button, then press and

hold the button.

Some exterior lights flash once.

Go within the range, and try again.

LED: Blinks when any button is pressed.

Some exterior lights flash six times if the power system turns on successfully.

Exterior lights will not flash if the power system turns on unsuccessfully.

The power system is on for up to 10 minutes without you starting the vehicle. To extend the time for another 10 minutes during the first 10 minutes, press the
button, then press and hold the button. u Some exterior lights flash six times if a 10-minute extension request was
transmitted successfully.

1Remote Engine Start
3 WARNING
Carbon monoxide gas is toxic and can rapidly accumulate in closed or even partly enclosed areas.
Breathing it can cause unconsciousness and even kill you.
Never use the remote engine starter with the vehicle parked in a garage or other areas with limited ventilation.
The remote engine start may violate local laws. Before using the remote engine start, check your local laws.
If there are buildings and obstacles between your vehicle and the remote, the range will be reduced. This distance may vary by external electrical interference.

Driving

418

https://manual-hub.com/

uuWhen DrivinguTurning on the Power

To turn the power system off

Go within the range, and try again.

The exterior lights will not flash when the remote is out of the keyless access system range. The power system will not be turned off.

Press and hold the button for one second.

The exterior lights flash once if the power system turns off successfully.

* Not available on all models

Continued

1Remote Engine Start
The power system may not be turned on by the remote engine start if:
· You have disabled a remote engine start setting
using the audio/information screen. 2 Customized Features P. 357
· The power mode is not in VEHICLE OFF. · The transmission is in a position other than (P. · The hood is open, or any door or the trunk is unlocked. · You have already used the remote twice to turn the
power system on.
· Another registered keyless remote is in the vehicle. · There is an antenna failure. · The door is unlocked with the built-in key. · The engine oil pressure is low. · The engine coolant temperature is extremely high. · The telematics unit* malfunctions. · The security system alarm is not set.
The power system may be turned off while it is on if:
· You do not start the vehicle within 10 minutes of
turning the power system on with the keyless remote.
· The power system is turned off by using the keyless
remote.
· The security system alarm is activated. · The door is unlocked with the built-in key. · The hood is open. · The engine coolant temperature is extremely high. · The engine oil pressure is low. · The malfunction indicator lamp comes on if there is
a problem with the emissions control systems.
· The transmission is in a position other than (P.

https://manual-hub.com/

Driving

419

uuWhen DrivinguTurning on the Power

1Remote Engine Start
While the power system is on, the vehicle will automatically precondition inside the vehicle. When it is warm outside:
· The climate control system is activated in auto
mode. When it is cold outside:
· The defroster is activated at a moderately warm
temperature.
· The rear defogger and door mirror heaters are
activated.
· The seat heaters* and heated steering wheel* are
activated. 2 Heated Steering Wheel* P. 240 2 Front Seat Heaters* P. 241 2 Front Seat Heaters and Seat Ventilation*
P. 242

Driving

420 * Not available on all models

https://manual-hub.com/

uuWhen DrivinguTurning on the Power

Starting to Drive
When the power system is turned on using the button on the keyless remote
1. Depress and hold the brake pedal, then press the POWER button.
When the power system is turned on in any case
2. Keeping your right foot on the brake pedal, check that the READY indicator is on, then put the transmission into (D. Select (R when reversing.
3. With the parking brake applied, release the brake pedal and gently depress the accelerator pedal. u Make sure the parking brake and brake system indicator (red) goes off.
2 Parking Brake P. 503
Hill start assist system Hill start assist keeps the brake engaged briefly to help prevent the vehicle from rolling on inclines as you move your foot from the brake pedal to the accelerator.
Put the transmission into (D when facing uphill, or (R when facing downhill, then release the brake pedal.
Stopping the Power System
You can turn the power system off when the vehicle is completely stopped. 1. Put the transmission into (P. 2. Press the POWER button.

1Starting to Drive
When the power system is turned on using the button on the keyless remote
You can also release the parking brake by pressing the electric parking brake switch while depressing the brake pedal. When facing downhill, you can start your vehicle more smoothly by manually releasing it with the electric parking brake switch than by releasing it with the accelerator pedal.
The power system is off when the transmission is taken out of (P before the POWER button is pressed. Follow the step 1 when starting to drive.
As a hybrid vehicle, the sounds and vibrations from the engine may be absent even though the vehicle is ready for driving. It also makes you fail to recognize that you can start. Make sure to check if the READY indicator is on before you start to drive.
1Hill start assist system Hill start assist may not prevent the vehicle from rolling downhill on a very steep or slippery slope, and does not operate on small inclines.

Hill start assist is not a replacement for the parking brake.

Driving

https://manual-hub.com/

421

uuWhen DrivinguPrecautions While Driving

Precautions While Driving
In Rain
Avoid driving in deep water and on flooded roads. This can damage the power system or driveline, or cause electrical component failure.
Other Precautions
If there is a strong impact with something under the vehicle, stop in a safe location. Check the underside of the vehicle for damage or any fluid leaks.
Transmission
Creeping
As with a conventional gasoline-powered vehicle with an automatic transmission, this vehicle will creep. Keep the brake pedal firmly depressed when stopped.

1Precautions While Driving
NOTICE Do not change the shift position while pressing the accelerator pedal. You could damage the transmission.
NOTICE If you repeatedly turn the steering wheel at an extremely low speed, or hold the steering wheel in the full left or right position for a while, the electric power steering (EPS) system heats up. The system goes into a protective mode, and limits its performance. The steering wheel becomes harder and harder to operate. Once the system cools down, the EPS system is restored. Repeated operation under these conditions can eventually damage the system.
If the power mode is set to ACCESSORY while driving, the power system will shut down and all steering and brake power assist functions will stop, making it difficult to control the vehicle.

Do not select (N while driving as you will lose regenerative braking (and acceleration) performance.

During the first 600 miles (1,000 km) of operation, avoid sudden acceleration or full throttle operation so as not to damage the power system or powertrain.

Avoid hard braking for the first 200 miles (300 km) after purchasing your new vehicle or replacing the brake pads or rotors, to allow for proper break-in.

Driving

422

https://manual-hub.com/

uuWhen DrivinguShifting

Shifting
Change the shift position in accordance with your driving needs.
Shift button positions
Park Used when parking or turning the power on or off. Transmission is locked.
Reverse Used when reversing.
Neutral Transmission is not locked.
Drive Used for normal driving. The deceleration paddle selector can be
used temporarily. The deceleration paddle selector can be
used when SPORT mode is on.

1Shifting
3 WARNING
The vehicle can roll away if left unattended without confirming that Park is engaged.
A vehicle that rolls away could cause a crash resulting in serious injury or death.
Always keep your foot on the brake pedal until you have confirmed that (P is shown on the shift position indicator.
While the High Voltage battery level is full, or the High Voltage battery temperature is low, regenerative braking may become less effective.
To prevent malfunction and unintended engagement:
· Do not spill any liquids on or around shift buttons. · Do not place or drop any objects on or around shift
buttons.
· Do not let passengers or children operate the shift
buttons.
You may occasionally find that it takes longer than usual for the vehicle to start moving when you select (R, release the brake pedal, and/or depress the accelerator pedal. This may occur when the High Voltage battery level is extremely low, and does not indicate a vehicle malfunction.

Driving

Continued
https://manual-hub.com/

423

uuWhen DrivinguShifting

(P (parking) button
(P Button

The shift position changes to (P when you press the (P button while the vehicle is parked with the power mode in ON. The indicators on the sides of the (P button come on.

1Shifting
The beeper sounds and the message appears on the driver information interface when you depress the accelerator pedal with the shift position in (N.
2 Driver Information Interface Warning and Information Messages P. 115
Change the shift position to (D or (R with the brake pedal depressed.
When shifting positions in extremely low temperatures (-22°F/-30°C), there may be a short delay before the shift position is displayed. Always confirm you are in the correct shift position before driving.

Driving

424

https://manual-hub.com/

Shift Operation

uuWhen DrivinguShifting

Shift Position Indicator (Transmission System Indicator)
Deceleration Paddle Selector Indicator

1Shift Operation
NOTICE When you change (D to (R and vice versa, come to a complete stop and keep the brake pedal depressed. Operating the shift button before the vehicle has come to a complete standstill can damage the transmission.
Use the shift position indicator and the shift button indicator to check the shift position before selecting a shift button.

Press the (P button. Press back the (R button. Press the (N button.

If the indicator of the currently selected shift position, or all the shift position indicators are blinking simultaneously, there is a problem with the transmission. Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible.
The beeper sounds once when you change to (R. 2 Customized Features P. 357

Press the (D button.

Driving

Shift Button Indicator

Continued
https://manual-hub.com/

425

uuWhen DrivinguShifting

When opening the driver's door If you open the driver's door under the following conditions, the shift position automatically changes to (P. · The vehicle is stationary with the power mode in ON, or moving at 1 mph (2 km/
h) or slower. · The transmission is in other than (P. · You have unfastened the driver side seat belt.
u If you manually change the shift position from (P with the brake pedal depressed, the shift position will automatically return to (P once you release the brake pedal.
When turning off the power mode If you turn the power system off while the vehicle is stationary, and the transmission is in other than (P, the shift position automatically changes to (P.

1When opening the driver's door While the system is designed to automatically change the shift position to (P under the described conditions, in the interest of safety you should always select (P before opening the driver's door. Make sure to park the vehicle in a safe place. 2 When Stopped P. 512
If you want to drive the vehicle after the shift position has automatically changed to (P under the described conditions, close the door, fasten the seat belt, depress the brake pedal, then change the shift position.
If you leave the vehicle, turn off the power system and lock the doors.

Driving

426

https://manual-hub.com/

uuWhen DrivinguShifting

If you want to keep the transmission in (N position [car wash mode] With the power system on: 1. Press and hold the brake pedal. 2. Press and release the (N button.
u (N (Neutral) hold mode will appear on the driver information interface. 3. Press the (N button again and hold it for two seconds.
u The vehicle will enter car wash mode, which must be used when your vehicle is pulled through a conveyor type automatic car wash where you or an attendant do not remain in the vehicle. If you want to cancel car wash mode, select a position other than (N. If the POWER button is pressed after car wash
mode has been activated, the power mode
will change to ACCESSORY and a message
will be displayed on the driver information
interface. u For 15 minutes the transmission remains in (N with the power mode will remain in ACCESSORY. After that, the
transmission automatically changes to (P and the power mode changes to OFF. u Manually changing to (P cancels ACCESSORY mode. The (P indicator comes on and the power mode changes
to OFF. You must always put the transmission into (P when car wash mode is no longer needed.

1If you want to keep the transmission in (N position [car wash
mode]
Note that the transmission may not stay in (N position while any of the following indicators is on:
· Transmission system indicator. · Malfunction indicator lamp. · Charging system indicator.

Driving

Continued
https://manual-hub.com/

427

uuWhen DrivinguShifting

Restrictions on selecting a shift position You cannot select a shift position under certain circumstances that may lead to a crash.

When the transmission is in:

1. Under these circumstances:

2. If you try to change to the following:

3. The shift position remains in/changes to:

The brake pedal is not

depressed.

The accelerator pedal is

depressed.

The vehicle is moving at low Other shift position speed without the brake pedal

depressed. (N

The vehicle is moving at low

speed with the accelerator

pedal depressed.

(N or (D

The vehicle is moving forward.

(R or (N

The vehicle is moving backward.

(R, (N, or (D The vehicle is moving.

(P or (N

The READY indicator is not on.

A shift position other than (P or (N

(P or (N

How to change the shift position
Release the accelerator pedal and depress the brake pedal.
Park your vehicle in a safe place. Make sure that the READY indicator comes on.

Driving

428

https://manual-hub.com/

SPORT Mode
Models without adaptive damper system

SPORT Mode Indicator

Models with adaptive damper system

Press

SPORT Button
To turn the SPORT mode on and off, press the SPORT button.
The SPORT mode increases engine performance and handling*. This mode is not recommended for fuel economy enhancement, but suitable for driving on hills or through curves on mountain roads.
The SPORT mode is turned off every time you turn on the power system, even if you turned it on the last time you drove the vehicle.

* Not available on all models

https://manual-hub.com/

uuWhen DrivinguSPORT Mode
429

Driving

uuWhen DrivinguDeceleration Paddle Selector

Deceleration Paddle Selector

When you release the accelerator pedal, you can control the rate of deceleration

without removing your hands from the steering wheel. Using the deceleration

paddle selector situated on the steering wheel, you can sequentially shift through

four stages of deceleration.

When descending a hill, you can use the deceleration paddle selector to help

maintain the rate of deceleration, thereby allowing you to keep a safe distance

between your vehicle and the vehicle ahead.

Decrease

The default deceleration stage is . Each paddle selector operation makes a single

Deceleration Stage

stage deceleration change. u The deceleration stage may not change if you keep the paddle selector pulled back.

Increase
To select the different stages of deceleration: · Pull back the (+ selector (right side) to decrease the deceleration stage. · Pull back the (- selector (left side) to increase the deceleration stage. Pull the (+ selector for a few seconds when you want to cancel the deceleration paddle selector.

1Deceleration Paddle Selector
3 CAUTION
Rapidly increasing the deceleration rate by quickly shifting the deceleration paddle selector can cause the tires to skid, resulting in a crash that could injure or kill someone.
Always maintain a reasonable rate of deceleration.
If you are descending a hill when you select stage , the vehicle may enter stage .
If you pull back right and left paddle selector at the same time, the deceleration stage may not change.

Driving

430

https://manual-hub.com/

uuWhen DrivinguDeceleration Paddle Selector

When to use

Shift position is in (D

When SPORT mode is OFF, the deceleration stage appears.

Deceleration Stage
When SPORT mode is ON, the deceleration stage and M appear.

1Deceleration Paddle Selector
In the following situations, the stage may not change and the stage icon will blink even if you pull back the selector. The deceleration stage may decrease or cancel automatically:
· The High Voltage battery is fully charged or its
temperature is too cold or too hot.
· The speed of the vehicle is beyond the deceleration
range with SPORT mode off.
· Hybrid system protection is needed. · The paddle selector is operated while your vehicle
is stopped automatically by ACC with Low Speed Follow.
If either paddle selector is operated, ACC with Low Speed Follow will cancel automatically.

Increase the deceleration stage when pulling the (- paddle selector (left side)

Paddle Selector
Decrease the deceleration stage when pulling the (+ paddle selector (right side)

Driving

Continued
https://manual-hub.com/

431

uuWhen DrivinguDeceleration Paddle Selector
When SPORT mode is OFF If you pull back the paddle selector, the rate of deceleration will change temporarily, and the stage will appear in the driver information interface. When you want to cancel the deceleration paddle selector, pull the (+ selector (right side) for a few seconds. The deceleration paddle selector will cancel automatically and deceleration stage in the driver information interface disappear when you drive with constant speed, situations of acceleration and decelerate just before stopping your vehicle.
When SPORT mode is ON If you pull back the paddle selector, the rate of deceleration will change and the stage along with M will appear in the driver information interface. The deceleration stage will not cancel automatically while SPORT mode is ON. When you want to cancel the deceleration paddle selector, turn the SPORT mode OFF, or pull the (+ selector (right side) for a few seconds. When canceled, deceleration stage in the driver information interface disappears.

Driving

432

https://manual-hub.com/

ECON Mode
*1
*2

uuWhen DrivinguECON Mode
1ECON Mode While in ECON mode, the climate control system has greater temperature fluctuation.

*1:Models without adaptive damper system *2:Models with adaptive damper system
The ECON button turns the ECON mode on and off. The ECON mode helps you improve your fuel economy by adjusting the performance of the climate control system and the accelerator pedal response.

Driving

https://manual-hub.com/

433

uuWhen DrivinguAcoustic Vehicle Alerting System
Acoustic Vehicle Alerting System
Alerts pedestrians when the vehicle transmission is in a position other than (P and is traveling at speeds of 22 mph (36 km/h) or less.
Adaptive Damper System*
Constantly controls your vehicle's front and rear dampers according to current road conditions, vehicle speed and steering operation.
You can change handling response by turning the SPORT mode on.
2 SPORT Mode P. 429

Driving

434 * Not available on all models

https://manual-hub.com/

uuWhen DrivinguVehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System

Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System
VSA® helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It also assists in maintaining traction on slippery surfaces. It does so by regulating engine and motor output and selectively applying the brakes.

VSA® Operation

When VSA® activates, you may notice that the engine and motor do not respond to the accelerator. You may also notice some noise from the hydraulic brake system. You will also see the indicator blink.

VSA® System Indicator

1Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System The VSA® may not function properly if tire type and size are mixed. Make sure to use the same size and type of tire, and the air pressures as specified.
When the VSA® indicator comes on and stays on while driving, there may be a problem with the system. While this may not interfere with normal driving, have your vehicle checked by a dealer immediately.
VSA® cannot enhance stability in all driving situations and does not control the entire braking system. You still need to drive and corner at speeds appropriate for the conditions and always leave a sufficient margin of safety.
The main function of the VSA® system is generally known as Electronic Stability Control (ESC). The system also includes a traction control function.

The Vehicle Stability AssistTM (VSA®) system, Vehicle Stability AssistTM (VSA®) OFF, adaptive cruise control (ACC) with low speed follow, safety support, and low tire pressure/TPMS indicators may come on in amber along with a message in the driver information interface when you set the power mode to ON after reconnecting the 12-volt battery. Drive a short distance at more than 12 mph (20 km/h). Each indicator should go off. If any do not, have your vehicle checked by a dealer.

Driving

Continued
https://manual-hub.com/

435

uuWhen DrivinguVehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System

VSA® On and Off
VSA® OFF Indicator

This button is on the driver side control panel. To partially disable VSA® functionality/ features, press and hold it until you hear a beep.
Your vehicle will have normal braking and cornering ability, but traction control function will be less effective.

1Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System
In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA® temporarily switched off.
When the button is pressed, the traction control function becomes less effective. This allows for the wheels to spin more freely at low speed. You should only attempt to free your vehicle with the VSA® off if you are not able to free it when the VSA® is on.

To restore VSA® functionality/features, press the (VSA® OFF) button until you hear a beep.

Immediately after freeing your vehicle, be sure to switch VSA® on again. We do not recommend driving your vehicle with the VSA® system switched off.

VSA® is turned on every time you turn the power system on, even if you turned it off the last time you drove the vehicle.

You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after turning the power system on or while driving. This is normal.

Driving

436

https://manual-hub.com/

uuWhen DrivinguAgile Handling Assist

Agile Handling Assist
Lightly brakes the front wheels, as needed, when you turn the steering wheel, and helps support the vehicle's stability and performance during cornering.

1Agile Handling Assist
The agile handling assist cannot enhance stability in all driving situations. You still need to drive and corner at speeds appropriate for the conditions and always leave a sufficient margin of safety.

When the VSA® system indicator comes on and stays on while driving, the agile handling assist does not activate.

You may hear a sound coming from the engine compartment while the agile handling assist is activated. This is normal.

Driving

https://manual-hub.com/

437

uuWhen DrivinguTire Pressure Monitoring System (TPMS)

Tire Pressure Monitoring System (TPMS)
Instead of directly measuring the pressure in each tire, the TPMS on this vehicle monitors and compares the rolling radius and rotational characteristics of each wheel and tire while you are driving to determine if one or more tires are significantly under-inflated. Low Tire Pressure/TPMS Indicator This will cause the low tire pressure/TPMS
indicator to come on and a message to appear on the driver information interface.

1Tire Pressure Monitoring System (TPMS) The system does not monitor the tires when driving at low speed.
Conditions such as low ambient temperature and altitude change directly affect tire pressure and can trigger the low tire pressure/TPMS indicator to come on.

Tire pressure checked and inflated in:
· Warm weather can become under-inflated in
colder weather.
· Cold weather can become overinflated in warmer
weather. The low tire pressure/TPMS indicator will not come on as a result of overinflation.

The TPMS may not function properly if tire type and size are mixed. Make sure to use the same size and type of tire.
2 Checking and Maintaining Tires P. 564

The low tire pressure/TPMS indicator may come on
with a delay or may not come on at all when:
· You rapidly accelerate, decelerate, or turn the
steering wheel.
· You drive on snowy or slippery roads. · Tire chains are used.

The low tire pressure/TPMS indicator may come on
under the following conditions:
· There is a heavier and uneven load on the tires than
the condition at calibration.
· Tire chains are used.

Driving

438

https://manual-hub.com/

TPMS Calibration
You must start TPMS calibration every time you: · Adjust the pressure in one or more tires. · Rotate the tires. · Replace one or more tires.
Before calibrating the TPMS: · Set the cold tire pressure in all four tires.
2 Checking Tires P. 564
Make sure: · The vehicle is at a complete stop. · The transmission is in (P. · The power mode is in ON.

uuWhen DrivinguTire Pressure Monitoring System (TPMS)

1Tire Pressure Monitoring System (TPMS)
The Vehicle Stability AssistTM (VSA®) system, Vehicle Stability AssistTM (VSA®) OFF, adaptive cruise control (ACC) with low speed follow, safety support, and low tire pressure/TPMS indicators may come on in amber along with a message in the driver information interface when you set the power mode to ON after reconnecting the 12-volt battery. Drive a short distance at more than 12 mph (20 km/h). Each indicator should go off. If any do not, have your vehicle checked by a dealer.

Driving

1TPMS Calibration The calibration process requires approximately 30 minutes of cumulative driving at speeds between 3060 mph (48-97 km/h). During this period, if the power mode is set to ON and the vehicle is not moved within 45 seconds, you may notice the low tire pressure/TPMS indicator comes on briefly. This is normal and indicates that the calibration process is not yet complete.
If the Tire chains are installed, remove them before calibrating the TPMS.
If the low tire pressure/TPMS indicator comes on even when the properly inflated specified regular tires are installed, have your vehicle checked by a dealer.
We recommend that the tires be replaced with the same brand, model, and size as the originals. Ask a dealer for details.

Continued
https://manual-hub.com/

439

uuWhen DrivinguTire Pressure Monitoring System (TPMS)
You can calibrate the system from the customized feature on the audio/information screen.
2 Customized Features P. 357
1. Set the power mode to ON. 2. Press the button. 3. Select Settings. 4. Select Vehicle. 5. Select TPMS Calibration. 6. Select Calibrate.
· If the Calibration Failed To Start. message appears, repeat step 6.
· The calibration process finishes automatically.

Driving

440

https://manual-hub.com/

uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation
U.S. models
Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
(If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale

Driving

when one or more of your tires is significantly under-inflated.
Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Continued
https://manual-hub.com/

441

uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.

Driving

442

https://manual-hub.com/

uuWhen DrivinguBlind spot information System*

Blind spot information System*
Is designed to detect vehicles in specified alert zones adjacent to your vehicle, particularly in harder to see areas commonly known as "blind spots."

When the system detects vehicles approaching from behind in adjacent lanes, the appropriate indicator comes on for a few seconds, providing assistance when you change lanes.

How the system works

The transmission is in (D.

Your vehicle speed is

between 20 mph (32 km/h)

and 100 mph (160 km/h)

Radar Sensors: underneath

Alert zone range A: Approx. 1.6 ft. (0.5 m)

the rear bumper corners

A B

B: Approx. 10 ft. (3 m)

C: Approx. 10 ft. (3 m)

Alert Zone C

1Blind spot information System*
3 WARNING
Failure to visually confirm that it is safe to change lanes before doing so may result in a crash and serious injury or death. Do not rely only on the blind spot information system when changing lanes.
Always look in your mirrors, to either side of your vehicle, and behind you for other vehicles before changing lanes.
Important Safety Reminder Like all assistance systems, blind spot information system has limitations. Overreliance on blind spot information system may result in a collision.
The blind spot information system alert indicator may not come on under the following conditions:
· A vehicle does not stay in the alert zone for more
than two seconds.
· A vehicle is parked in a side lane. · The speed difference between your vehicle and the
vehicle you are passing is greater than 6 mph (10 km/h).
· An object not detected by the radar sensors
approaches or passes your vehicle.
· A vehicle running in the adjacent lane is a
motorcycle or other small vehicle.

Driving

* Not available on all models

Continued
https://manual-hub.com/

443

uuWhen DrivinguBlind spot information System*

When the system detects a vehicle

Comes On

Blind spot information System Alert Indicator: Located on the outside rearview mirror on

both sides.

Blinks

Comes on when: · A vehicle enters the alert zone from behind
to overtake you with a speed difference of no more than 31 mph (50 km/h) from your vehicle. · You pass a vehicle with a speed difference of no more than 12 mph (20 km/h).

Blinks and a beeper sounds when: You move the turn signal lever in the direction of the detected vehicle. The beeper sounds three times.

1Blind spot information System*
The system is for your convenience only. Even if an object is within the alert zone, the following situations may occur.
· The blind spot information system alert indicator
may not come on due to obstruction (splashes, etc.) even without the Blind Spot Information System Not Available driver information interface appearing.
· The blind spot information system alert indicator
may come on even with the message appearing.
You can change the setting for the blind spot information system.
2 Customized Features P. 357

Driving

444 * Not available on all models

https://manual-hub.com/

uuWhen DrivinguBlind spot information System*

Blind spot information system on and off

Left Selector Wheel

When you turn the blind spot information system on and off, do the following.

1. Press the safety support switch.

2. Roll the left selector wheel to the symbol

and push it.

Safety Support Switch

The blind spot information system is in the previously selected ON or OFF setting each time you start the power system.

1Blind spot information System*
Blind spot information system may be adversely affected when:
· Objects (guard rails, poles, trees, etc.) are detected. · An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
· Driving on a curved road. · A vehicle is moving from a far lane to the adjacent
lane.
· The system picks up external electrical interference. · The rear bumper or the sensors have been
improperly repaired or the rear bumper has been deformed.
· The orientation of the sensors has been changed. · In bad weather (Heavy rain, snow, and fog). · Making a turn at an intersection. · Driving on a bumpy road. · Making a short turn that slightly tilts the vehicle.

For a proper blind spot information system operation:
· Always keep the rear bumper corner area clean. · Do not cover the rear bumper corner area with
labels or stickers of any kind.
· Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be repaired, or the rear bumper corner area is strongly impacted.

Driving

* Not available on all models

https://manual-hub.com/

445

uuWhen DrivinguHigh Voltage Battery

High Voltage Battery
The High Voltage battery gradually discharges even if the vehicle is not in use. As a result, if your vehicle is parked for an extended period of time, the battery charge level will become low. Extended periods of time at a low state of charge will shorten battery life. To maintain the battery state of charge, drive your vehicle for more than 30 minutes at least once every three months. Extreme high temperatures can affect the battery life. You can minimize the effects by parking the vehicle in the shade during the summer.

1High Voltage Battery
Be careful not to let the High Voltage battery drain too much. If the battery level becomes close to zero, it will make it impossible to start the engine.

Driving

446

https://manual-hub.com/

Honda Sensing®
Models without Low Speed Braking Control
Honda Sensing® is a driver support system which employs the use of two distinctly different kinds of sensors: a radar sensor located at the lower part of the front bumper and a front sensor camera mounted to the interior side of the windshield, behind the rearview mirror.
Models with Low Speed Braking Control
Honda Sensing® is a driver support system which employs the use of three distinctly different kinds of sensors: a radar sensor located at the lower part of the front bumper, a front sensor camera mounted to the interior side of the windshield, behind the rearview mirror, and the sonar sensors located in the front and rear bumpers.
Honda Sensing® has following functions.
The functions which do not require switch operations to activate · Collision Mitigation Braking SystemTM (CMBSTM) 2 P. 450 · Low Speed Braking Control* 2 P. 459 · Road Departure Mitigation (RDM) System 2 P. 488 · Traffic Sign Recognition System 2 P. 493
The functions which require switch operations to activate · Adaptive Cruise Control (ACC) with Low Speed Follow 2 P. 464 · Lane Keeping Assist System (LKAS) 2 P. 480

Driving

* Not available on all models

Continued
https://manual-hub.com/

447

uuHonda Sensing®u

Operation Switches for the ACC with Low Speed Follow/ LKAS

Button

RES/+ Button Button Press to activate standby mode for ACC with

Low Speed Follow. Or press to cancel the

Interval Button

CANCEL Button
SET/- Button

system.
LKAS Button Press to activate standby mode for LKAS. Or

press to cancel the system.

LKAS Button
RES/+ and SET/- Buttons

Press RES/+ button to resume the ACC with

Low Speed Follow or increase the vehicle

speed.

Press SET/- button to set the ACC with Low

Speed Follow or decrease the vehicle speed.

Interval Button Press to change the ACC with Low Speed Follow following-interval.

CANCEL Button Press to cancel ACC with Low Speed Follow.

Driving

448

https://manual-hub.com/

uuHonda Sensing®u

Driver Information Interface Content
You can see the current state of ACC with Low Speed Follow and LKAS.
a Indicates that ACC with Low Speed Follow is ready to be activated.
· White: The system is in standby. · Green: The system is on. · Amber: There is a problem with the system.

1Driver Information Interface Content
Models with head-up display
You can have the head-up display show you the current state of each function.
2 Head-Up Display* P. 166

b Indicates that LKAS is ready to be activated.

· White: The system is in standby.

· Green: The system is on.

· Amber: There is a problem with the system.

Driving

c Indicates that LKAS is activated and whether or not traffic lane lines are detected.
· Solid lane outlines: The system is on. · Lane outlines: The system is in standby.

d Indicates whether or not ACC with Low Speed Follow detects the vehicle ahead.

e Shows vehicle set speed in ACC with Low Speed Follow.

* Not available on all models

f Shows set vehicle interval in ACC with Low Speed Follow.
https://manual-hub.com/

449

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)

Collision Mitigation Braking SystemTM (CMBSTM)
The system can assist you when it determines there is a possibility of your vehicle colliding with a vehicle or a pedestrian detected in front of your vehicle. The CMBSTM is designed to alert you when the potential for a collision is determined, as well as to reduce your vehicle speed to help minimize collision severity when a collision is deemed unavoidable.
How the System Works
When to use
The camera is located behind the rearview mirror.

1Collision Mitigation Braking SystemTM (CMBSTM)
Important Safety Reminder The CMBSTM is designed to reduce the severity of an unavoidable collision. It does not prevent a collisions nor stop the vehicle automatically. It is still your responsibility to operate the brake pedal and steering wheel appropriately according to the driving conditions.
The CMBSTM may not activate or may not detect a vehicle in front of your vehicle under certain conditions:
2 CMBSTM Conditions and Limitations P. 454

For directions on the proper handling of the radar sensor, refer to the following page.
2 Radar Sensor P. 501

Driving

The radar sensor is at the lower part of the front bumper.

450

The system starts monitoring the roadway ahead when your vehicle speed is about 3 mph (5 km/h) or above will search for a vehicle in front of you. The CMBSTM activates when: The speed difference between your vehicle and a vehicle or pedestrian detected in
front of you becomes about 3 mph (5 km/h) and over with a chance of a collision. Your vehicle speed is about 62 mph (100 km/h) or less and the system determines
there is a chance of a collision with: - Vehicles detected in front of you that are stationary, oncoming, or traveling in your same direction. - A pedestrian who is detected in front of you. Your vehicle speed is above 62 mph (100 km/h), and the system determines there is a
chance of a collision with a vehicle detected in front of you traveling in your same direction.
https://manual-hub.com/

You can read about handling information for the camera equipped with this system.
2 Front Sensor Camera P. 499
When the CMBSTM activates, it may automatically apply the brake. It will be canceled when your vehicle stops or a potential collision is not determined.

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)

When the system activates

The system provides visual and audible alerts of a possible collision, and stops if the collision is avoided.
u Take appropriate action to prevent a collision (apply the brakes, change lanes, etc.)

Visual Alerts

Head-up Warning Lights*

1Collision Mitigation Braking SystemTM (CMBSTM)
The camera in the CMBSTM is also designed to detect pedestrians. However, this pedestrian detection feature may not activate or may not detect a pedestrian in front of your vehicle under certain conditions. Refer to the ones indicating the pedestrian detection limitations from the list.
2 CMBSTM Conditions and Limitations P. 454

Audible Alert

Beep

You can change the distance (Long/Normal/Short) between vehicles at which the system's earliest collision alert will come on through audio/information screen setting options.
2 Customized Features P. 357

Models with head-up display
The head-up warning uses a lens located at the front end of the dashboard. Do not cover the lens or spill any liquid on it.
Lens

Driving

* Not available on all models

Continued
https://manual-hub.com/

451

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)

Collision Alert Stages
The system has three alert stages for a possible collision. However, depending on circumstances, the CMBSTM may not go through all of the stages before initiating the last stage.

Distance between vehicles

The radar sensor detects a vehicle

CMBSTM Audible & Visual WARNINGS

Braking

Normal

When in Long, visual and audible alerts

Stage one

Long Short

There is a risk of a collision with the vehicle ahead of you.

come on at a longer distance from a vehicle ahead than in Normal setting, and in Short, at a shorter distance than in

Your Vehicle

Vehicle Ahead

Normal.

Stage two

Your Vehicle

Vehicle Ahead

The risk of a collision has increased, time to respond is reduced.

Stage three

Your Vehicle

Vehicle Ahead

The CMBSTM determines that a collision is unavoidable.

Visual and audible alerts.

Lightly applied
Forcefully applied

Driving

452

https://manual-hub.com/

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)

CMBSTM On and Off
Left Selector Wheel
Safety Support Switch

When you turn the CMBSTM on and off, do the following. 1. Press the safety support switch. 2. Roll the left selector wheel to the
symbol and push it. u A message appears on the driver
information interface when the system turns on or off.
The CMBSTM is turned on every time you turn on the power system, even if you turned it off the last time you drove the vehicle.

1Collision Mitigation Braking SystemTM (CMBSTM)
The CMBSTM may automatically shut off, and the safety support indicator (amber) will come and stay on under certain conditions:
2 CMBSTM Conditions and Limitations P. 454
When the CMBSTM is activated, it will continue to operate even if the accelerator pedal is partially depressed. However, it will be canceled if the accelerator pedal is fully depressed.
The Vehicle Stability AssistTM (VSA®) system, Vehicle Stability AssistTM (VSA®) OFF, adaptive cruise control (ACC) with low speed follow, safety support, and low tire pressure/TPMS indicators may come on in amber along with a message in the driver information interface when you set the power mode to ON after reconnecting the 12-volt battery. Drive a short distance at more than 12 mph (20 km/h). Each indicator should go off. If any do not, have your vehicle checked by a dealer.

Driving

Continued
https://manual-hub.com/

453

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)

CMBSTM Conditions and Limitations
The system may automatically shut off and the safety support indicator (amber) will come on under certain conditions. Some examples of these conditions are listed below. Other conditions may reduce some of the CMBSTM functions.
2 Front Sensor Camera P. 499 2 Radar Sensor P. 501

1CMBSTM Conditions and Limitations
Have your vehicle checked by a dealer if you find any unusual behavior of the system (e.g., the warning message appears too frequently).

Environmental conditions · Driving in bad weather (rain, fog, snow, etc.). · Sudden changes between light and dark, such as an entrance or exit of a tunnel. · There is little contrast between objects and the background. · Driving into low sunlight (e.g., at dawn or dusk). · Strong light is reflected onto the roadway. · Driving in the shadows of trees, buildings, etc. · Roadway objects or structures are misinterpreted as vehicles and pedestrians. · Reflections on the interior of the windshield. · Driving at night or in a dark place such as a tunnel (due to low-light conditions,
pedestrians or other vehicles may not be detected).

Roadway conditions · Driving on a snowy or wet roadway (obscured lane marking, vehicle tracks,
reflected lights, road spray, high contrast). · Driving on curvy, winding, or undulating roads. · The road is hilly or the vehicle is approaching the crest of a hill.

Driving

454

https://manual-hub.com/

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)

Vehicle conditions · Headlight lenses are dirty or the headlights are not properly adjusted. · The outside of the windshield is blocked by dirt, mud, leaves, wet snow, etc. · The inside of the windshield is fogged. · An abnormal tire or wheel condition (incorrect sizes, varied sizes or construction,
improperly inflated, etc.). · When tire chains are installed. · The vehicle is tilted due to a heavy load or suspension modifications. · The camera temperature gets too high. · Driving with the parking brake applied. · When the radar sensor at the lower part of the front bumper gets dirty. · Driving at night or in a dark place (e.g., a tunnel) with the headlights off.
Detection limitations · A vehicle or pedestrian suddenly crosses in front of you. · The distance between your vehicle and the vehicle or pedestrian ahead of you is
too short. · A vehicle cuts in front of you at a slow speed, and it brakes suddenly. · When you accelerate rapidly and approach the vehicle or pedestrian ahead of you
at high speed. · The vehicle ahead of you is a motorcycle, bicycle, mobility scooter or other small
vehicle. · When there are animals in front of your vehicle. · When you drive on a curved, winding or undulating road that makes it difficult for
the sensor to properly detect a vehicle in front of you. · The speed difference between your vehicle and a vehicle or pedestrian in front of
you is significantly large. · An oncoming vehicle suddenly comes in front of you. · Another vehicle suddenly comes in front of you at an intersection, etc. · Your vehicle abruptly crosses over in front of an oncoming vehicle. · When driving through a narrow iron bridge. · When the lead vehicle suddenly slows down.

Driving

Continued
https://manual-hub.com/

455

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)
Limitations applicable to pedestrian detection only
· When there is a group of people in front of your vehicle walking together side by side.
· Surrounding conditions or belongings of the pedestrian alter the pedestrian's shape, preventing the system from recognizing that the person is a pedestrian.
· When the pedestrian is shorter than about 3.3 feet (1 meter) or taller than about 6.6 feet (2 meters) in height.
· When a pedestrian blends in with the background. · When a pedestrian is bent over or squatting, or when their hands are raised or
they are running. · When several pedestrians are walking ahead in a group. · When the camera cannot correctly identify that a pedestrian is present due to an
unusual shape (holding luggage, body position, size).
Automatic shutoff The CMBSTM may automatically shut itself off and the safety support indicator (amber) comes and stays on when: · The temperature inside the system is high. · You drive off-road or on a mountain road, or curved and winding road for an
extended period. · An abnormal tire condition is detected (incorrect tire size, flat tire, etc.). · The camera behind the rearview mirror, or the area around the camera, including
the windshield, gets dirty.
Once the conditions that caused the CMBSTM to shut off improve or are addressed (e.g., cleaning), the system comes back on.

Driving

456

https://manual-hub.com/

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)
With Little Chance of a Collision
The CMBSTM may activate even when you are aware of a vehicle ahead of you, or when there is no vehicle ahead. Some examples of this are: When Passing Your vehicle approaches another vehicle ahead of you and you change lanes to pass. At an intersection Your vehicle approaches or passes another vehicle that is making a left or right turn.

Driving

Continued
https://manual-hub.com/

457

uuHonda Sensing®uCollision Mitigation Braking SystemTM (CMBSTM)
On a curve When driving through curves, your vehicle comes to a point where an oncoming vehicle is right in front of you.
Through a low bridge at high speed You drive under a low or narrow bridge at high speed. Speed bumps, road work sites, train tracks, roadside objects, etc. You drive over speed bumps, steel road plates, etc., or your vehicle approaches train tracks or roadside objects (such as a traffic sign and guard rail) on a curve or, when parking, stationary vehicles and walls.

Driving

458

https://manual-hub.com/

uuHonda Sensing®uLow Speed Braking Control*

Low Speed Braking Control*
Using sonar sensors located on the front and rear bumpers, the vehicle detects if there is danger of a potential collision with a wall or other obstacle. The system is designed to alert you when a potential collision is determined, as well as assist in reducing speed, avoiding collisions, and reducing collision severity.

1Low Speed Braking Control*
3 WARNING
The Low Speed Braking Control System cannot avoid all collisions and may not reduce damage in each situation where the accelerator is mistakenly or aggressively pressed. Overreliance on the system may result in a collision with serious injury or death. Always check your surroundings, your shift position, and your pedal use. Driver remains responsible for safely operating the vehicle.

If the Low Speed Braking Control activates in a situation where you do not want automatic brake application (such as when the vehicle is between two railroad crossing gates), simply press the brake pedal to deactivate the system and then continue to drive as intended.

Driving

* Not available on all models

Continued
https://manual-hub.com/

459

uuHonda Sensing®uLow Speed Braking Control*

How the System Works
The Low Speed Braking Control provides a visual and audible alert when the vehicle is moving between approximately 1 and 6 mph (2 and 10 km/h) and there is the possibility of a collision with a detected wall or other obstacle, as well as providing assistance with braking.

Beep

Audible Alert

Beep

1Low Speed Braking Control* For directions on the proper handling of the sonar sensors, please refer to the following page. 2 Sonar Sensors* P. 502
The vehicle will release the brake and start moving a few seconds after the system is activated. To keep the vehicle stopped, keep the brake pedal depressed or put the transmission into (P.
In order to prevent the system from activating when not needed, always turn it off during vehicle maintenance, when loading on ships, trucks, and so on, when using a chassis dynamometer or free rollers for inspection or when putting your vehicle through a conveyor type car wash.

Do not make any modifications to the suspension or the system may not operate correctly.

The vehicle applies brake

Driver depresses brake pedal

Stop

Remove brake after maintaining stationary position

Always use the size and type of tires recommended, make, and amount of wear. If these differ, the system may not operate correctly.

If the only rear sensors are turned off using the parking sensor system, the assistive braking is not working when reversing.
2 Turning off All Rear Sensors P. 518

Driving

460 * Not available on all models

https://manual-hub.com/

uuHonda Sensing®uLow Speed Braking Control*

System On and Off
Left Selector Wheel

When you turn the system on and off, do the following. 1. Press the safety support switch. 2. Roll the left selector wheel to the
symbol and push it. u A message appears on the driver
information interface when the system turns on or off.

1System On and Off
If the 12-volt battery is disconnected and reconnected, the Low Speed Braking Control may not turn on right away when you turn on the power system. The system will automatically turn ON after the vehicle has been moving at over 12 mph (20 km/h) for some time. If the system does not turn on, have your vehicle checked by a dealer.

Safety Support Switch

The system is turned on every time you start the power system, even if you turned it off the last time you drove the vehicle.

Driving

Continued
https://manual-hub.com/

461

uuHonda Sensing®uLow Speed Braking Control*

Conditions for Cancellation
A certain amount of time has passed since activation.
Low Speed Braking Control System Conditions and Limitations
The system may not operate correctly under the following conditions:
Examples of obstacles the sonar sensors cannot detect · Obstacles that do not reflect sound waves well, such as people, snow, cloth,
sponges, etc. · Thin obstacles such as fences, bicycles, sign posts, etc. · Short or small obstacles. · Obstacles immediately in front of the bumper. · Moving objects or obstacles that suddenly enter the road. · Obstacles that are not perpendicular to the ground, such as a wall.

1Conditions for Cancellation After Low Speed Braking Control has activated once, it will not activate again for the same obstacle. The system can be activated again after driving for some time after the last activation.
Low Speed Braking Control activates separately when moving forward and reversing. (For example, if it activates when moving forward, it can be activated again immediately if reversing.)

Driving

462

https://manual-hub.com/

uuHonda Sensing®uLow Speed Braking Control*
Examples of situations where the sonar sensors cannot detect obstacles · The sonar sensors are dirty (covered by snow, water, mud, etc.). · The vehicle is too hot or cold. · The steering wheel is turned sharply when approaching the obstacle at an angle.
Examples of other cases where the system may not work correctly · The vehicle is tilted due to heavy load in the trunk or rear seats. · Bad weather conditions such as heavy rain, fog, snow, sandstorms, etc. · The ambient temperature/humidity is too high or low. · When going down a very steep slope. · When close to other vehicles with sonar sensors or other objects that emit
ultrasonic waves.
Situations where the system may activate even without risk of a collision · When passing through short or narrow gates. · When driving on uneven surfaces, grassy areas, or places with steps. · When a sloped pillar or wall is protruding from a high position. · When there are obstacles next to the road. · When driving toward flags, curtains, tree branches, railroad crossing bars, etc. · When driving on flooded roads.

Driving

https://manual-hub.com/

463

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

Adaptive Cruise Control (ACC) with Low Speed Follow
Helps maintain a constant vehicle speed and a set following-interval behind a vehicle detected ahead of yours and, if the detected vehicle comes to a stop, can decelerate and stop your vehicle, without you having to keep your foot on the brake or the accelerator. When ACC with Low Speed Follow slows your vehicle by applying the brakes, your vehicle's brake lights will illuminate.
When to use

1Adaptive Cruise Control (ACC) with Low Speed Follow
3 WARNING
Improper use of ACC with Low Speed Follow can lead to a crash.
Use ACC with Low Speed Follow only when driving on expressways or freeways and in good road and weather conditions.

The camera is located behind the rearview mirror.

3 WARNING
ACC with Low Speed Follow has limited braking capability and may not stop your vehicle in time to avoid a collision with a vehicle that quickly stops in front of you.

The radar sensor is at the lower part of the front bumper.
Vehicle speed for ACC with Low Speed Follow: A vehicle is detected ahead within ACC with Low Speed Follow range ACC with Low Speed Follow operates at speeds up to 90 mph (145 km/h). No vehicle is detected within ACC with Low Speed Follow range ACC with Low Speed Follow operates at the speed of 25 mph (40 km/h) or above.
Shift position for ACC with Low Speed Follow: In (D.

Always be prepared to apply the brake pedal if the conditions require.
Important Reminder As with any system, there are limits to ACC with Low Speed Follow. Use the brake pedal whenever necessary, and always keep a safe interval between your vehicle and other vehicles.
For directions on the proper handling of the radar sensor, refer to the following page.
2 Radar Sensor P. 501

Driving

464

https://manual-hub.com/

How to activate the system
How to use
(white) is on in the instrument panel. ACC with Low Speed Follow is ready to use.

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

Press the button on the steering wheel.

1Adaptive Cruise Control (ACC) with Low Speed Follow
You can read about handling information for the camera equipped with this system.
2 Front Sensor Camera P. 499
ACC with Low Speed Follow may not work properly under certain conditions.
2 ACC with Low Speed Follow Conditions and Limitations P. 470
When not using ACC with Low Speed Follow: Turn off adaptive cruise by pressing the button.
Do not use ACC with Low Speed Follow under the following conditions:
· On roads with heavy traffic or while driving in
continuous stop and go traffic.
· On roads with sharp turns. · On roads with steep downhill sections, as the set
vehicle speed can be exceeded by coasting. In such cases, ACC with Low Speed Follow will not apply the brakes to maintain the set speed.
· On roads with toll collection facilities or other
objects between lanes of traffic, or in parking areas, or facilities with drive through access.

Driving

Continued
https://manual-hub.com/

465

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

To Set the Vehicle Speed
(green) is on.

SET/- Button

1To Set the Vehicle Speed
You can switch the displayed set speed measurements on the driver information interface or audio/information screen between mph and km/h.
2 Speed/Distance Units P. 154 2 Customized Features P. 357

On when ACC with Low Speed Follow begins

Press and release

When driving at about 25 mph (40 km/h) or above: Take your foot off the pedal and press the SET/ button when you reach the desired speed. The moment you release the button, the set speed is fixed, and ACC with Low Speed Follow begins. When driving slower than about 25 mph (40 km/h): If the vehicle is moving and the brake pedal is not depressed, pressing the button fixes the set speed to about 25 mph (40 km/h) regardless of current vehicle speed. If the vehicle is stationary, you can set the vehicle speed even with the brake pedal depressed.

Driving

(green)

Set Vehicle When ACC with Low Speed Follow starts Interval operating, the vehicle icon, interval bars and set
speed appear on the driver information interface.

Set Vehicle Speed

When you use ACC with Low Speed Follow, Straight Driving Assist (a feature of the Electric Power Steering system) is activated. By enabling the steering system to automatically compensate for natural steering pull, Straight Driving Assist makes it easier for you to keep your vehicle in a straight line.

466

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

When in Operation
There is a vehicle ahead ACC with Low Speed Follow monitors if a vehicle ahead of you enters the ACC with Low Speed Follow range. If a vehicle is detected doing so, the ACC with Low Speed Follow system maintains or decelerates your vehicle's set speed in order to keep the vehicle's set following interval from the vehicle ahead.
2 To Set or Change Following-Interval P. 474

1When in Operation
If the vehicle ahead of you slows down abruptly, or if another vehicle cuts in front of you, the beeper sounds, a message appears on the driver information interface, and the head-up warning lights* flash.

Driving

ACC with Low Speed Follow Range: 394 ft. (120 m)
When a vehicle whose speed is slower than your set speed is detected in front of you, your vehicle starts to slow down.

Depress the brake pedal, and keep an appropriate interval from the vehicle ahead.
Head-up warning lights*

A vehicle icon appears on the driver information interface

Beep

* Not available on all models

Continued
https://manual-hub.com/

467

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

There is no vehicle ahead
A vehicle icon with dotted-line contour appears on the driver information interface

Your vehicle maintains the set speed without having to keep your foot on the brake or accelerator pedal. If there previously was a vehicle detected ahead that kept your vehicle from traveling at the set speed, ACC with Low Speed Follow accelerates your vehicle to the set speed, and then maintains it.

When you depress the accelerator pedal You can temporarily increase the vehicle speed. In this case, there is no audible or visual alert even if a vehicle is in the ACC with Low Speed Follow range. ACC with Low Speed Follow stays on unless you cancel it. Once you release the accelerator pedal, the system resumes an appropriate speed for keeping the following interval while a vehicle ahead is within the ACC with Low Speed Follow range.

1When in Operation
Even if the interval between your vehicle and the vehicle detected ahead is short, ACC with Low Speed Follow may start accelerating your vehicle under the following circumstances:
· The vehicle ahead of you is going at almost the
same speed as, or faster than, your vehicle.
· A vehicle that cuts in front of you is going faster
than your vehicle, gradually increasing the interval between the vehicles.
You can also set the system to beep when a vehicle in front of you comes in and goes out of the ACC with Low Speed Follow detecting range. A vehicle detect beep on and off can be selected.
2 Customized Features P. 357
Limitations You may need to use the brake to maintain a safe interval when using ACC with Low Speed Follow. Additionally, ACC with Low Speed Follow may not work properly under certain conditions.
2 ACC with Low Speed Follow Conditions and Limitations P. 470

Driving

468

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

A vehicle detected ahead is within ACC with Low Speed Follow range and

slows to a stop

(green)

Your vehicle also stops, automatically. The Stopped message appears on the driver

information interface.

When the vehicle ahead of you starts again,

the vehicle icon on the driver information

interface blinks. If you press the RES/+ or

SET/ button, or depress the accelerator

pedal, ACC with Low Speed Follow operates

again within the prior set speed.

(green)

If no vehicle is ahead of you before you resume driving, depressing the accelerator

pedal will resume operation of ACC with Low

Speed Follow within the prior set speed.

1A vehicle detected ahead is within ACC with Low Speed Follow range and slows to a stop
3 WARNING
Exiting a vehicle that has been stopped while the ACC with Low Speed Follow system is operating can result in the vehicle moving without operator control.
A vehicle that moves without operator control can cause a crash, resulting in serious injury or death.
Never exit a vehicle when the vehicle is stopped by ACC with Low Speed Follow.

Driving

Continued
https://manual-hub.com/

469

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

ACC with Low Speed Follow Conditions and Limitations
The system may automatically shut off under certain conditions. Some examples of these conditions are listed below. Other conditions may reduce some of the ACC with Low Speed Follow functions.
2 Front Sensor Camera P. 499 2 Radar Sensor P. 501
Environmental conditions · Driving in bad weather (rain, fog, snow, etc.).

1ACC with Low Speed Follow Conditions and Limitations If you need the radar sensor to be repaired, or removed, or the radar sensor cover is strongly impacted, turn off the system by pressing the button and take your vehicle to a dealer.
Have your vehicle checked by a dealer if you find any unusual behavior of the system (e.g., the warning message appears too frequently).

Roadway conditions · Driving on a snowy or wet roadway (obscured lane marking, vehicle tracks,
reflected lights, road spray, high contrast).

Vehicle conditions · The outside of the windshield is blocked by dirt, mud, leaves, wet snow, etc. · An abnormal tire or wheel condition (incorrect sizes, varied sizes or construction,
improperly inflated, etc.). · The camera temperature gets too high. · The parking brake is applied. · The radar sensor cover is dirty. · The vehicle is tilted due to a heavy load or suspension modifications. · Tire chains are installed.

Driving

470

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow
Detection limitations · A vehicle suddenly crosses in front of you. · The interval between your vehicle and the vehicle ahead of you is too short. · A vehicle cuts in front of you at a slow speed, and it brakes suddenly. · You accelerate rapidly and approach the vehicle ahead of you at high speed. · The vehicle ahead of you is a motorcycle, bicycle, mobility scooter, or other small
vehicle. · There are animals in front of your vehicle. · You drive on a curved or winding or undulating road that makes it difficult for the
sensor to properly detect a vehicle in front of you.

Driving

· The speed difference between your vehicle and a vehicle in front of you is significantly large.
· An oncoming vehicle suddenly comes in front of you. · Your vehicle abruptly crosses over in front of an oncoming vehicle.
Continued
https://manual-hub.com/

471

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow
· Driving through a narrow metal bridge.

Driving

· The vehicle ahead of you brakes suddenly. · The vehicle ahead of you has a unique shape.
Sensor detects upper section of an empty carrier truck.

Panel truck, tanker truck, etc.

· Your vehicle or the vehicle ahead of you is driving on one edge of the lane.

472

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

To Adjust the Vehicle Speed
Increase or decrease the vehicle speed using the RES/+ or SET/ button on the steering wheel.
To increase speed

1To Adjust the Vehicle Speed If a vehicle detected ahead is going at a speed slower than your increased set speed, ACC with Low Speed Follow may not accelerate your vehicle. This is to maintain the set interval between your vehicle and the vehicle ahead.
When you depress the accelerator pedal and then push and release the SET/ button, the current speed of the vehicle is set.

To decrease speed
· Each time you press the RES/+ or SET/ button, the vehicle speed is increased or decreased by about 1 mph or 1 km/h accordingly.
· If you keep pressing the RES/+ or SET/ button, the vehicle speed increases or decreases by about 5 mph or 5 km/h accordingly.

Driving

Continued
https://manual-hub.com/

473

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

To Set or Change Following-Interval

Interval Button

Press the interval button to change the ACC with Low Speed Follow following-interval. Each time you press the button, the followinginterval (the interval behind a vehicle detected ahead of you) setting cycles through extra long, long, middle, and short followingintervals.

Determine the most appropriate followinginterval setting based on your specific driving conditions. Be sure to adhere to any following-interval requirements set by local regulation.

Driving

474

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

The higher your vehicle's following-speed is, the longer the short, middle, long or extra long following-interval becomes. See the following examples for your reference.

Following-Interval

When the Set Speed is:

50 mph (80 km/h)

65 mph (104 km/h)

Short

83 feet 25 meters
1.1 sec

100 feet 31 meters
1.1 sec

Middle

110 feet 33 meters
1.5 sec

137 feet 42 meters
1.5 sec

Driving

Long

154 feet 47 meters
2.1 sec

200 feet 61 meters
2.1 sec

Extra Long

207 feet 63 meters
2.9 sec

272 feet 83 meters
2.9 sec

When your vehicle stops automatically because a vehicle detected ahead of you has stopped, the interval between the two vehicles will vary based on the ACC with Low Speed Follow interval setting.

Continued
https://manual-hub.com/

475

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

To Cancel
Button

CANCEL Button

To cancel ACC with Low Speed Follow, do any of the following: · Press the CANCEL button.
u The indicator (green) on the driver information interface changes to the indicator (white).
· Press the button. u indicator (green) goes off.
· Depress the brake pedal while the vehicle is moving forward. u The indicator (green) on the driver information interface changes to the indicator (white).

1To Cancel Resuming the prior set speed: After you have canceled ACC with Low Speed Follow, you can resume the prior set speed while it is still displayed. Press the RES/+ button.
The set speed cannot be set or resumed when ACC with Low Speed Follow has been turned off using the
button. Press the button to activate the system, then set the desired speed.

Driving

476

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

Automatic cancellation The beeper sounds and a message appears on the driver information interface when ACC with Low Speed Follow is automatically canceled. Any of these conditions may cause the ACC with Low Speed Follow to automatically cancel: · Bad weather (rain, fog, snow, etc.) · When the radar sensor at the lower part of the front bumper gets dirty. · The vehicle ahead of you cannot be detected. · An abnormal tire condition is detected, or the tires are skidding. · Driving on a mountainous road, or driving off road for extended periods. · Abrupt steering wheel movement. · When the ABS, VSA®, CMBSTM, or Low Speed Braking Control system* is
activated. · When the ABS or VSA® system indicator comes on. · When the vehicle is stopped on a very steep slope. · When you manually apply the parking brake. · When the detected vehicle within the ACC with Low Speed Follow range is too
close to your vehicle. · The camera behind the rearview mirror, or the area around the camera, including
the windshield, gets dirty. · When the Maximum Load Limit is exceeded. · When passing through an enclosed space, such as tunnel. · The vehicle has repeatedly applied the brakes to maintain the set speed (for
example, you are descending a long slope).

1Automatic cancellation
Even though ACC with Low Speed Follow has been automatically canceled, you can still resume the prior set speed. Wait until the condition that caused ACC with Low Speed Follow to cancel improves, then press the SET/ button.

Driving

The ACC with Low Speed Follow automatic cancellation can be also triggered by the following causes. In these cases, the parking brake will be automatically applied. · The driver's seat belt is unfastened when the vehicle is stationary. · The vehicle stops for more than 10 minutes. · The power system is turned off.

* Not available on all models

Continued

477

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

To Switch ACC with Low Speed Follow to Cruise Control

Interval Button

ACC with Low Speed Follow ON

Cruise Control ON

(white)

Press and hold the interval button for one second. Cruise Mode Selected appears on the driver information interface for two seconds, and then the mode switches to Cruise. The indicator comes on. · White: The system is standby. · Green: The system is on. To switch back to ACC with Low Speed Follow, press and hold the interval button again for one second.

When to use Desired speed in a range above roughly 25 mph (40 km/h).

1To Switch ACC with Low Speed Follow to Cruise Control
Always be aware which mode you are in. When you are driving in Cruise mode, the system will not assist you to maintain a following-interval from a vehicle ahead of you.
You can switch the displayed set speed measurements on the driver information interface or audio/information screen between mph and km/h.
2 Speed/Distance Units P. 154 2 Customized Features P. 357

Driving

478

https://manual-hub.com/

uuHonda Sensing®uAdaptive Cruise Control (ACC) with Low Speed Follow

To Set the Vehicle Speed
Take your foot off the pedal and press the SET/ button when you reach the desired speed. The moment you release the SET/ button, the set speed is fixed, and cruise control begins. The indicator (green) comes on.

When you use cruise control, Straight Driving Assist (a feature of the Electric Power Steering system) is activated. By enabling the steering system to automatically compensate for natural steering pull, Straight Driving Assist makes it easier for you to keep your vehicle in a straight line.

To Adjust the Vehicle Speed
· Each time you press the RES/+ or SET/ button, the vehicle speed is increased or decreased by about 1 mph or 1 km/h.
· If you keep pressing the RES/+ or SET/ button, the vehicle speed increases or decreases by about 5 mph or 5 km/h.

Driving

To Cancel
To cancel cruise control, do any of the following: · Press the CANCEL button.
u The indicator (green) on the driver information interface change to the indicator (white).
· Press the button. u indicator (green) goes off.
· Depress the brake pedal. u The indicator (green) on the driver information interface change to the indicator (white).
https://manual-hub.com/

1To Cancel Resuming the prior set speed: After cruise control has been canceled, you can still resume the prior set speed by pressing the RES/+ button while driving at a speed of at least 25 mph (40 km/h) or more.
You cannot set or resume in the following situations:
· When vehicle speed is less than 25 mph (40 km/h) · When the button is turned off.
At vehicle speeds of 22 mph (35 km/h) or less, cruise control is canceled automatically.

479

uuHonda Sensing®uLane Keeping Assist System (LKAS)

Lane Keeping Assist System (LKAS)

Provides steering input to help keep the vehicle in the middle of a detected lane and provides tactile and visual alerts if the vehicle is detected drifting out of its lane.

Steering input assist
The system applies torque to the steering to keep the vehicle between the left and right lane lines. The applied torque becomes stronger as the vehicle gets closer to either of the lane lines.

Front Sensor Camera
Monitors the lane lines.

Tactile and visual alerts
Rapid vibrations on the steering wheel and a warning display alert you that the vehicle is drifting out of a detected lane.

1Lane Keeping Assist System (LKAS) Important Safety Reminders The LKAS is for your convenience only. It is not an autonomous driving system and always requires driver attention and control. The system does not work if you take your hands off the steering wheel or fail to steer the vehicle. 2 Driver Information Interface Warning and Information Messages P. 115
The LKAS is convenient when it is used on freeways.
Do not place objects on the instrument panel. Objects may reflect on the windshield and prevent correct detection of the traffic lanes.

The LKAS only alerts you when lane drift is detected without a turn signal in use. The LKAS may not detect all lane markings or lane departures; accuracy will vary based on weather, speed, and lane marker condition. It is always your responsibility to safely operate the vehicle and avoid collisions.

When you operate the turn signals to change lanes, the system is suspended, and resumes after the signals are off.
If you make a lane change without operating the turn signals, the LKAS alerts activate, and torque is applied to the steering.

The LKAS may not work properly or may work improperly under the certain conditions:
2 LKAS Conditions and Limitations P. 485
You can read about handling information for the camera equipped with this system.
2 Front Sensor Camera P. 499

Driving

480

https://manual-hub.com/

uuHonda Sensing®uLane Keeping Assist System (LKAS)

Lane Keep Support Function
Provides assistance to keep the vehicle in the center of the lane. When the vehicle nears a white or yellow line, steering force of the electric power steering will become stronger.

1Lane Keeping Assist System (LKAS) The LKAS may not function as designed while driving in frequent stop and go traffic, or on roads with sharp curves.
When it fails to detect lanes, the system will temporarily be canceled. When a lane is detected, the system will recover automatically.

Lane Departure Warning Function
When the vehicle enters the warning area, the LKAS alerts you with slight steering wheel vibration as well as a warning display.
Warning Area
Warning Area
Continued
https://manual-hub.com/

Driving

481

uuHonda Sensing®uLane Keeping Assist System (LKAS)

When the System can be Used
The system can be used when the following conditions are met. · The lane in which you are driving has detectable lane markers on both sides, and
your vehicle is in the center of the lane. · The vehicle is traveling between about 45 and 90 mph (72 and 145 km/h). · You are driving on a straight or slightly curved road. · The turn signals are off. · The brake pedal is not depressed. · The wipers are not in high speed operation.

How to activate the system
(white) LKAS Button

1. Press the LKAS button. u indicator (white) and lane outlines appear on the driver information interface. The system is ready to use.

1When the System can be Used
If the vehicle drifts toward either left or right lane line due to the system applying torque, turn off the LKAS and have your vehicle checked by a dealer.

Driving

482

https://manual-hub.com/

uuHonda Sensing®uLane Keeping Assist System (LKAS)

To Cancel

(green)
LKAS Button

2. Keep your vehicle near the center of the lane while driving. u The indicator changes from white to green and the dotted outer lines change to solid ones once the system starts operating after detecting the left and right lane markings.
Press the LKAS button.
The LKAS is turned off every time you stop the power system, even if you turned it on the last time you drove the vehicle.

Driving

Continued
https://manual-hub.com/

483

uuHonda Sensing®uLane Keeping Assist System (LKAS)

(white) is on.
When the LKAS is suspended, the lane lines on the driver information interface change to contour lines, and the beeper sounds (if activated).

The system operation is suspended if you:
· Set the wipers to high speed. u Turning the wipers off, setting it to LO, or the wipers are operating intermittently resumes the LKAS.
· Decrease the vehicle speed to about 40 mph (64 km/h) or less. u Increasing the vehicle speed to about 45 mph (72 km/h) or more resumes the LKAS.
· Depress the brake pedal. u The LKAS resumes and starts detecting the lane lines again once you release the brake pedal.
· Your vehicle is driving to the right or the left of the lane.

1The system operation is suspended if you:
You can change the setting for the LKAS. LKAS suspended beep ON and OFF can be selected.
2 Customized Features P. 357

The LKAS may be automatically suspended when: · The system fails to detect lane lines. · The steering wheel is quickly turned. · You fail to steer the vehicle. · Driving through a sharp curve. · Driving at a speed in excess of approximately 90 mph (145 km/h). Once these conditions no longer exist, the LKAS automatically resumes.

Driving

484

https://manual-hub.com/

uuHonda Sensing®uLane Keeping Assist System (LKAS)
The LKAS may be automatically canceled when: · The camera temperature gets extremely high or low. · The camera behind the rearview mirror, or the area around the camera, including
the windshield, gets dirty. · The ABS or VSA® system engages. The beeper sounds if the LKAS is automatically canceled.
LKAS Conditions and Limitations
The system may not detect lane markings and therefore may not keep the vehicle in the middle of the lane under certain conditions, including the following:
Environmental conditions · Driving in bad weather (rain, fog, snow, etc.). · Sudden changes between light and dark, such as an entrance or exit of a tunnel. · There is little contrast between lane lines and the roadway surface. · Driving into low sunlight (e.g., at dawn or dusk). · Strong light is reflected onto the roadway. · Driving in the shadows of trees, buildings, etc. · Shadows of adjacent objects are parallel to lane markings. · Roadway objects or structures are misinterpreted as lane markers. · Reflections on the interior of the windshield. · Driving at night or in a dark condition such as a tunnel.

Driving

Continued
https://manual-hub.com/

485

uuHonda Sensing®uLane Keeping Assist System (LKAS)

Roadway conditions · Driving on a snowy or wet roadway (obscured lane marking, vehicle tracks,
reflected lights, road spray, high contrast). · Driving on a road with temporary lane markings. · Faint, multiple, or varied lane markings are visible on the roadway due to road
repairs or old lane markings.

Faded lines

Duplicate lines

Tire tracks

· The roadway has merging, split, or crossing lines (e.g., such as at an intersection or crosswalk).
· The lane markings are extremely narrow, wide, or changing.
Very wide or narrow traffic lane

Driving

· The vehicle in front of you is driving near the lane lines. · The road is hilly or the vehicle is approaching the crest of a hill. · Driving on rough or unpaved roads, or over bumpy surfaces.
486
https://manual-hub.com/

uuHonda Sensing®uLane Keeping Assist System (LKAS)
· When objects on the road (curb, guard rail, pylons, etc.) are recognized as white lines (or yellow lines).
· Driving on roads with double lines.
Lane void of lines at exit or interchange

Driving

Vehicle conditions · Headlight lenses are dirty or the headlights are not properly adjusted. · The outside of the windshield is streaked or blocked by dirt, mud, leaves, wet
snow, etc. · The inside of the windshield is fogged. · The camera temperature gets too high. · An abnormal tire or wheel condition (incorrect sizes, varied sizes or construction,
improperly inflated, etc.). · The vehicle is tilted due to a heavy load or suspension modifications.

https://manual-hub.com/

487

uuHonda Sensing®uRoad Departure Mitigation (RDM) System

Road Departure Mitigation (RDM) System
Alerts and helps to assist you when the system detects a possibility of your vehicle unintentionally crossing over detected lane markings and/or leaving the roadway altogether.

How the System Works

The front camera behind the rearview mirror monitors left and right lane markings (in white or yellow). If your vehicle is getting too close to detected lane markings without a turn signal activated, the system, in addition to a visual alert, applies steering torque and alerts you with rapid vibrations on the steering wheel, to help you remain within the detected lane.
2 Customized Features P. 357

As a visual alert, the Lane Departure message appears on the driver information interface.

If the system determines that its steering input is insufficient to keep your vehicle on the roadway, it may apply braking.
u Braking is applied only when the lane markings are solid continuous lines. The system cancels assisting operations when you turn the steering wheel to avoid crossing over detected lane markings.

1Road Departure Mitigation (RDM) System Important Safety Reminder Like all assistance systems, the RDM system has limitations. Overreliance on the RDM system may result in a collision. It is always your responsibility to keep the vehicle within your driving lane.
The RDM system only alerts you when lane drift is detected without a turn signal in use. The RDM system may not detect all lane markings or lane or roadway departures; accuracy will vary based on weather, speed and lane marker condition. It is always your responsibility to safely operate the vehicle and avoid collisions.
You can read about handling information for the camera equipped with this system.
2 Front Sensor Camera P. 499
The RDM system may not work properly or may work improperly under the certain conditions:
2 RDM Conditions and Limitations P. 491
There are times when you may not notice RDM functions due to your operation of the vehicle, or road surface conditions.

Driving

If the system operates several times without detecting driver response, the system beeps to alert you.

488

https://manual-hub.com/

uuHonda Sensing®uRoad Departure Mitigation (RDM) System
1Road Departure Mitigation (RDM) System In the following case, a beeper sounds, a message related to the ACC with Low Speed Follow appears on the driver information interface, and the braking function controlled by the RDM system is canceled.
· The vehicle has repeatedly applied the brakes to
maintain the set speed (for example, you are descending a long slope).
If LKAS is off and you have selected Narrow from the customized options using the audio/information screen, the message below will appear in case the system determines a possibility of your vehicle crossing over detected lane markings.
2 Customized Features P. 357

Driving

Continued
https://manual-hub.com/

489

uuHonda Sensing®uRoad Departure Mitigation (RDM) System

How the System Activates
The system activates when all of the following conditions are met: · The vehicle is traveling between about 45 and 90 mph (72 and 145 km/h). · The vehicle is on a straight or slightly curved road. · The turn signals are off. · The brake pedal is not depressed. · The wipers are not in high speed operation. · The system makes a determination that the driver is not actively accelerating,
braking, or steering.

1How the System Activates
The RDM system may automatically shut off and the safety support indicator (amber) comes and stays on.
2 Indicators P. 88
RDM system function can be impacted when the vehicle is:
· Not driven within a traffic lane. · Driven on the inside edge of a curve, or outside of
a lane.
· Driven in a narrow lane.

Driving

490

https://manual-hub.com/

uuHonda Sensing®uRoad Departure Mitigation (RDM) System

RDM On and Off
Left Selector Wheel

When you turn the RDM on and off, do the following. 1. Press the safety support switch. 2. Roll the left selector wheel to the symbol
and push it. u A message appears on the driver
information interface when the system turns on or off.

Safety Support Switch

The RDM is in the previously selected ON or OFF setting each time you start the power system.

RDM Conditions and Limitations
The system may not properly detect lane markings and the position of your vehicle under certain conditions. Some examples of these conditions are listed below.

1RDM On and Off
When you have selected Warning Only from the customized options using the audio/information screen, the system does not operate the steering wheel and braking.
2 Customized Features P. 357
The Vehicle Stability AssistTM (VSA®) system, Vehicle Stability AssistTM (VSA®) OFF, adaptive cruise control (ACC) with low speed follow, safety support, and low tire pressure/TPMS indicators may come on in amber along with a message in the driver information interface when you set the power mode to ON after reconnecting the 12-volt battery. Drive a short distance at more than 12 mph (20 km/h). Each indicator should go off. If any do not, have your vehicle checked by a dealer.

Driving

Environmental conditions · Driving in bad weather (rain, fog, snow, etc.). · Sudden changes between light and dark, such as an entrance or exit of a tunnel. · There is little contrast between lane lines and the roadway surface. · Driving into low sunlight (e.g., at dawn or dusk). · Strong light is reflected onto the roadway. · Driving in the shadows of trees, buildings, etc. · Shadows of adjacent objects are parallel to lane markings. · Roadway objects or structures are misinterpreted as lane markers. · Reflections on the interior of the windshield. · Driving at night or in a dark condition such as a tunnel.

Continued

491

https://manual-hub.com/

uuHonda Sensing®uRoad Departure Mitigation (RDM) System
Roadway conditions · Driving on a snowy or wet roadway (obscured lane marking, vehicle tracks,
reflected lights, road spray, high contrast). · Driving on a road with temporary lane markings. · Faint, multiple, or varied lane markings are visible on the roadway due to road
repairs or old lane markings. · The roadway has merging, split, or crossing lines (e.g., such as at an intersection
or crosswalk). · The lane markings are extremely narrow, wide, or changing. · The vehicle in front of you is driving near the lane lines. · The road is hilly or the vehicle is approaching the crest of a hill. · Driving on rough or unpaved roads, or over bumpy surfaces. · When objects on the road (curb, guard rail, pylons, etc.) are recognized as white
lines (or yellow) lines. · Driving on roads with double lines.
Vehicle conditions · Headlight lenses are dirty or the headlights are not properly adjusted. · The outside of the windshield is streaked or blocked by dirt, mud, leaves, wet
snow, etc. · The inside of the windshield is fogged. · The camera temperature gets too high. · An abnormal tire or wheel condition (incorrect sizes, varied sizes or construction,
improperly inflated, etc.). · The vehicle is tilted due to a heavy load or suspension modifications. · When tire chains are installed.

Driving

492

https://manual-hub.com/

uuHonda Sensing®uTraffic Sign Recognition System

Traffic Sign Recognition System
Reminds you of road sign information, such as the current speed limit, your vehicle has just passed through, showing it on the driver information interface and the head-up display*.

How the System Works

When the camera located behind the rearview mirror captures traffic signs while driving, the system displays the ones that are recognized as designated for your vehicle. The sign icon will be displayed until the vehicle reaches a predetermined time and distance.

Driver information interface

Head-up display*

The sign icon also may switch to another one, or disappear when: · The other designated limit is detected. · You make a turn with a turn signal at an intersection.

1Traffic Sign Recognition System
Not all signs may be displayed, but any signs posted on roadsides should not be ignored. The system does not work on the designated traffic signs of all the countries you travel, nor in all situations. Do not rely too much on the system. Always drive at speeds appropriate for the road conditions.
Never apply a film or attach any objects to the windshield that could obstruct the camera's field of vision and cause the system to operate abnormally. Scratches, nicks, and other damage to the windshield within the camera's field of vision can cause the system to operate abnormally. If this occurs, we recommend that you replace the windshield with a genuine Honda replacement windshield. Making even minor repairs within the camera's field of vision or installing an aftermarket replacement windshield may also cause the system to operate abnormally. After replacing the windshield, have a dealer recalibrate the camera. Proper calibration of the camera is necessary for the system to operate properly.

Driving

* Not available on all models

Continued
https://manual-hub.com/

493

uuHonda Sensing®uTraffic Sign Recognition System

If the system does not detect any traffic signs while you are driving, the image below may appear.

Driver information interface

Head-up display*

1Traffic Sign Recognition System
To help reduce the likelihood that high interior temperatures will cause the camera's sensing system to shut off, when parking, find a shady area or face the front of the vehicle away from the sun. If you use a reflective sun shade, do not allow it to cover the camera housing. Covering the camera can concentrate heat on it.

You can read about handling information for the camera equipped with this system.
2 Front Sensor Camera P. 499

Driving

494 * Not available on all models

https://manual-hub.com/

uuHonda Sensing®uTraffic Sign Recognition System

Traffic Sign Recognition System Conditions and Limitations
The traffic sign recognition system may not be able to recognize a traffic sign in the following cases.
Vehicle conditions · Headlight lenses are dirty or the headlights are not properly adjusted. · The outside of the windshield is blocked by dirt, mud, leaves, wet snow, etc. · The inside of the windshield is fogged. · There are portions remaining to be wiped. · An abnormal tire or wheel condition (wrong sized, varied size or construction,
improperly inflated, etc.). · The vehicle is tilted due to a heavy load or suspension modifications.

1Traffic Sign Recognition System Conditions and Limitations When the traffic sign recognition system malfunctions, appears on the driver information interface. If this message does not disappear, have your vehicle checked by a dealer.
Driver information interface

Environmental conditions · Driving into low sunlight (e.g., at dawn or dusk). · Strong light is reflected onto the roadway. · Sudden changes between light and dark, such as an entrance or exit of a tunnel. · When you drive in the shadows of trees, buildings, etc. · Driving at night, in dark areas such as long tunnels. · Driving in bad weather (rain, fog, snow, etc.). · A vehicle in front of you is kicking up spray or snow.

Head-up display*

Driving

* Not available on all models

Continued
https://manual-hub.com/

495

uuHonda Sensing®uTraffic Sign Recognition System
The position or the condition of the traffic sign · A sign is hard to be found since it is in a complicated area. · A sign is located far away from your vehicle. · A sign is located where the beam of the headlight is hard to reach. · A sign is on a corner or bend in the road. · Faded or bent signs. · Rotated or damaged signs. · A sign is covered with mud, snow, or frost. · A part of the sign is hidden by the trees, or the sign itself is hidden by a vehicle
and others. · Light (a streetlight) or a shadow is reflected on the surface of the sign. · A sign is too bright or too dark (an electric sign). · A sign of a small size.
Other conditions · When you are driving at a high speed.

Driving

496

https://manual-hub.com/

uuHonda Sensing®uTraffic Sign Recognition System
The traffic sign recognition system may not operate correctly, such as displaying a sign that does not follow the actual regulation for the roadway or does not exist at all in the following cases.
u A speed limit sign may display at a higher or lower speed than the actual speed limit.
· There is a supplementary sign with further information such as weather, time, vehicle type, school zone, etc.
· Figures on the sign are hard to read (electric signs, numbers on the sign are blurred, etc.).
· A sign is in the vicinity of the lane you are driving in, even though it is not for the lane (speed limit sign situated at the junction between the side road and the main road, etc.).
· There are things that look similar to the color or shape of the recognition object (similar sign, electric sign, signboard, structure, etc.).
· A truck or another large vehicle with a sticker of the speed limit sign on the back is traveling in front of you.

Driving

Continued
https://manual-hub.com/

497

uuHonda Sensing®uTraffic Sign Recognition System

Signs Displayed on the Driver information interface and Head-Up Display*

The speed limit sign icon is displayed on the right half of the screen. When main mode is selected

Driver information interface

Head-up display*

Speed Limit Sign When main mode is not selected

Driver information interface

Head-up display*

Driving

Speed Limit Sign
Selecting to display traffic signs when main mode is off You can continue displaying a reduced-size traffic sign icon on the driver information interface and head-up display* even while the main mode is not selected.
2 Customized Features P. 357
498 * Not available on all models
https://manual-hub.com/

uuHonda Sensing®uFront Sensor Camera

Front Sensor Camera
The camera, used in systems such as Lane Keeping Assist System, Road Departure Mitigation, Adaptive Cruise Control with Low Speed Follow, Collision Mitigation Braking SystemTM, and traffic sign recognition system, is designed to detect an object that triggers any of the systems to operate its functions.

Camera Location and Handling Tips

Front Sensor Camera

This camera is located behind the rearview mirror.
To help reduce the likelihood that high interior temperatures will cause the camera's sensing system to shut off, when parking, find a shady area or face the front of the vehicle away from the sun. If you use a reflective sun shade, do not allow it to cover the camera housing. Covering the camera can concentrate heat on it.

1Front Sensor Camera
Never apply a film or attach any objects to the windshield, the hood, or the front grille that could obstruct the camera's field of vision and cause the system to operate abnormally. Scratches, nicks, and other damage to the windshield within the camera's field of vision can cause the system to operate abnormally. If this occurs, we recommend that you replace the windshield with a genuine Honda replacement windshield. Making even minor repairs within the camera's field of vision or installing an aftermarket replacement windshield may also cause the system to operate abnormally. After replacing the windshield, have a dealer recalibrate the camera. Proper calibration of the camera is necessary for the system to operate properly.
Do not place an object on the top of the instrument panel. It may reflect onto the windshield and prevent the system from detecting lane lines properly.

Driving

Continued
https://manual-hub.com/

499

uuHonda Sensing®uFront Sensor Camera

1Front Sensor Camera
If the Some Driver Assist Systems Cannot Operate: Camera Temperature Too High message appears:
· Use the climate control system to cool down the
interior and, if necessary, also use defroster mode with the airflow directed towards the camera.
· Start driving the vehicle to lower the windshield
temperature, which cools down the area around the camera.
If the Some Driver Assist Systems Cannot Operate: Clean Front Windshield message appears:
· Park your vehicle in a safe place, and clean the
windshield. If the message does not disappear after you have cleaned the windshield and driven for a while, have your vehicle checked by a dealer.

Driving

500

https://manual-hub.com/

Radar Sensor
Radar Sensor
Do not apply paint, stickers, or attach accessories to the front part of the radar sensor or the surrounding area.

uuHonda Sensing®uRadar Sensor

The radar sensor is at the lower part of the front bumper.

1Radar Sensor Avoid strong impacts to the radar sensor cover.

· Do not change the position of the radar sensor or any of the surrounding parts.
· Do not apply paint, stickers, or attach nongenuine accessories to the front part of the radar sensor or the surrounding area. Be particularly careful that any custom license plate frame or other accessory does not block any part of the radar beam path (see adjacent illustration).

For the CMBSTM to work properly:
· Always keep the radar sensor cover clean. · Never use chemical solvents or polishing powder
for cleaning the sensor cover. Clean it with water or a mild detergent.
· Do not put a sticker on the radar sensor cover or
replace the radar sensor cover.
If you need the radar sensor to be repaired, or removed, or the radar sensor cover is strongly impacted, turn off the system by using the safety support switch and take your vehicle to a dealer.
2 CMBSTM On and Off P. 453
If the vehicle is involved in any of the following situations, the radar sensor may not work properly. Have your vehicle checked by a dealer:
· Your vehicle is involved in a frontal collision. · Your vehicle drives through deep water or is
submerged in deep water.
· Your vehicle strongly strikes a bump, curb, chock,
or embankment that could jar the radar sensor.

Driving

https://manual-hub.com/

501

uuHonda Sensing®uSonar Sensors*
Sonar Sensors*
Location and range of sensors The sonar sensors are situated in the front and rear bumpers.

Sonar Sensors

1Sonar Sensors*
For the sonar sensors to work properly, do not:
· Place stickers or other objects on or around the
sensors.
· Hit the area around the sensors. · Attempt to take apart any sensor. · Put any accessories on or around the sensors.
Consult with a dealer if:
· A sensor has been subjected to shock. · Work needs to be done to the area around a
sensor.
In the following cases, the sonar sensors may not work properly. Have your vehicle checked by a dealer.
· The front or rear bumper has made contact with a
hill, parking block, curb, embankment, etc.
· The vehicle has been involved in frontal or rear
collision.
· The vehicle has been driven through a deep
puddle.

Driving

Sensor Range
502 * Not available on all models

https://manual-hub.com/

Braking

Brake System
Parking Brake
Use the parking brake to keep the vehicle stationary when parked. When the parking brake is applied, you can manually or automatically release it.
To apply The electric parking brake can be applied any time the vehicle has battery, no matter which position the power mode is in.

Electric Parking Brake Switch

Pull the electric parking brake switch up gently and securely.
u The indicator in the switch comes on. u The parking brake and brake system
indicator (red) comes on.

1Brake System When you depress the brake pedal, you may hear a whirling sound from the engine compartment. This is because the brake system is in operation, and it is normal.
1Parking Brake You may hear the electric parking brake system motor operating from the rear wheel area when you apply or release the parking brake. This is normal.
The brake pedal may slightly move due to the electric parking brake system operation when you apply or release the parking brake. This is normal.
You cannot apply or release the parking brake if the 12-volt battery goes dead.
2 If the 12-Volt Battery Is Dead P. 604

If you pull up and hold the electric parking brake switch while driving, the brakes on all four wheels are applied by the electric servo brake system until the vehicle comes to a stop. The electric parking brake then applies, and the switch should be released.

Driving

Continued
https://manual-hub.com/

503

uuBrakinguBrake System

Electric Parking Brake Switch

To release The power mode must be in ON in order to release the electric parking brake. 1. Depress the brake pedal. 2. Press the electric parking brake switch.
u The indicator in the switch goes off. u The parking brake and brake system
indicator (red) goes off.
Manually releasing the parking brake using the switch helps your vehicle to start slowly and smoothly when facing downhill on steep hills.

1Parking Brake
In the following situations, the parking brake automatically operates.
· When the vehicle stops with the automatic brake
hold system activated for more than 10 minutes.
· When the driver's seat belt is unfastened while
your vehicle is stopped and the automatic brake hold system is applied.
· When the power system is turned off while the
brake hold system is applied.
· When there is a problem with the automatic brake
hold system while brake hold is applied.
· When the vehicle is stops more than 10 minutes
while ACC with Low Speed Follow is activated.
· When the driver's seat belt is unfastened while
your vehicle is stopped automatically by ACC with Low Speed Follow.
· When the power system is turned off while ACC
with Low Speed Follow is activated.

Driving

504

https://manual-hub.com/

uuBrakinguBrake System

Automatic parking brake feature operation If the automatic parking brake feature has been activated: · The parking brake is applied automatically when you set the power mode to
VEHICLE OFF. · To confirm that the parking brake is applied, check if the parking brake and brake
system indicator (red) is on.
2 Activating and deactivating the automatic parking brake feature P. 506
To release automatically Depressing the accelerator pedal releases the parking brake.
Use the accelerator pedal to release the parking brake when you are starting the vehicle facing uphill, or in a traffic jam.
Gently depress the accelerator pedal. When on a hill, it may require more accelerator input to release.
u The indicator in the switch goes off. u The parking brake and brake system
indicator (red) goes off.

1Parking Brake If the parking brake cannot be released automatically, release it manually.
When the vehicle is traveling uphill, the accelerator pedal may need to be pressed farther to automatically release the electric parking brake.
The parking brake cannot be released automatically while the following indicators are on:
· Malfunction indicator lamp · Transmission indicator
The parking brake may not be released automatically while the following indicators are on:
· Parking brake and brake system indicator (amber) · VSA® system indicator · ABS indicator · Supplemental restraint system indicator

Accelerator Pedal
The parking brake automatically releases as you depress the accelerator pedal when: · You are wearing the driver's seat belt. · The power system is on. · The transmission is not in (P or (N.

Driving

Continued
https://manual-hub.com/

505

uuBrakinguBrake System

Activating and deactivating the automatic parking brake feature With the power mode in ON, carry out the following steps to either activate or deactivate the automatic parking brake feature. 1. Put the transmission into (P. 2. Without depressing the brake pedal, pull up and release the electric parking brake
switch. u Check that the parking brake and brake system indicator (red) has come on. 3. Pull up and hold the electric parking brake switch. When you hear a beeping sound, release the switch and within 3 seconds pull up and hold the switch again. 4. When you hear a sound indicating that the procedure is completed, release the switch. u Two beeps indicates that the feature has been activated. u One beep indicates that the feature has been deactivated. u When you have completed activating the feature, the parking brake will
remain applied after you turn off the power system. u To confirm that the parking brake is applied, check if the parking brake and
brake system indicator (red) is on.

1Parking Brake
In cold climates, the parking brake may freeze in place if applied. When parking the vehicle, chock the wheels and make sure the automatic parking brake feature is deactivated. Also, when putting your vehicle through a conveyortype car wash or when having your vehicle towed, deactivate the automatic parking brake feature and leave the parking brake released.

If you need to temporarily deactivate the feature while putting your vehicle through a conveyor type car wash, you can follow the procedure explained below. 1. Depress the brake pedal and bring the vehicle to a stop. 2. Set the power mode to VEHICLE OFF and then within 2 seconds push down the
electric parking brake switch. u Activation and deactivation settings for the feature will not be affected. u Before temporarily deactivating the feature, make sure to first turn off both
ACC with Low Speed Follow and the automatic brake hold system. u To confirm that the parking brake is applied, check if the parking brake and
brake system indicator (red) is on.

Driving

506

https://manual-hub.com/

uuBrakinguBrake System

Foot Brake
Your vehicle is equipped with disc brakes at all four wheels. The brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard.
2 Brake Assist System P. 511 2 Anti-lock Brake System (ABS) P. 510

1Foot Brake
Check the brakes after driving through deep water, or if there is a buildup of road surface water. If necessary, dry the brakes by lightly depressing the pedal several times.
If you hear a continuous metallic friction sound when applying the brakes, this is caused by the brake wear indicator rubbing on the brake rotor and indicates that the brake pads need to be replaced. Have the vehicle checked by a dealer. If you hear only an occasional squeak or squeal when you initially apply the brake pedal, this may be normal and caused by high frequency vibration of the brake pads against the rotating brake disc.

Applying constant pressure to the brakes while going down a long hill can cause the brakes to heat up, resulting in a loss of stopping power. Therefore, when descending a long hill, release the accelerator pedal and allow regenerative braking to slow the vehicle down. To adjust the rate of deceleration, use the deceleration paddle selector.
2 Deceleration Paddle Selector P. 430

Do not rest your foot on the brake pedal while driving, as it will lightly apply the brakes and cause them to lose effectiveness over time and reduce pad life. It will also confuse drivers behind you.

Driving

Continued
https://manual-hub.com/

507

uuBrakinguBrake System

Automatic Brake Hold

Keeps the brake applied after releasing the brake pedal until the accelerator pedal is pressed. You can use this system while the vehicle is temporarily stopped, like at traffic lights and in heavy traffic.

Turning on the system Activating the system

Canceling the system

Comes On
Automatic Brake Hold Button
Fasten your seat belt properly, then start the power system. Press the automatic brake hold button. The automatic brake
hold system indicator comes on. The system is turned on.

Brake Pedal

On
Comes On
U.S.
Comes On
Canada

Depress the brake pedal to come to a complete stop. The transmission must not be in (P or (R. The automatic brake
hold indicator comes on. Braking is kept for up to 10 minutes. Release the brake pedal after the automatic brake hold indicator comes on.

On
Goes Off
Accelerator Pedal
Depress the accelerator pedal while the transmission is in a other than (P or (N. The system is canceled and the vehicle starts to move. The automatic brake
hold indicator goes off. The system continues to be on.

1Automatic Brake Hold
3 WARNING
Activating the automatic brake hold system on steep hills or slippery roads may still allow the vehicle to move if you remove your foot from the brake pedal.
If a vehicle unexpectedly moves, it may cause a crash resulting in serious injury or death.
Never activate the automatic brake hold system or rely on it to keep a vehicle from moving when stopped on a steep hill or slippery roads.
3 WARNING
Using the automatic brake hold system to park the vehicle may result in the vehicle unexpectedly moving.
If a vehicle moves unexpectedly, it may cause a crash, resulting in serious injury or death.
Never leave the vehicle when braking is temporarily kept by automatic brake hold and always park the vehicle by putting the transmission in (P and applying the parking brake.

Driving

508

https://manual-hub.com/

uuBrakinguBrake System

The system automatically cancels when: · You engage the parking brake. · You depress the brake pedal and put the transmission into to (P or (R.
The system automatically cancels and the parking brake is applied when: · Braking is kept for more than 10 minutes. · The driver's seat belt is unfastened. · The power system is turned off. · Brake Hold System Problem. Apply Brake When Stopped. See Your
Dealer. appears on the driver information interface. · There is a problem with automatic brake hold system.

Turning off the automatic brake hold system

While the system is on, press the automatic

brake hold button again.

Goes Off

u The automatic brake hold system indicator goes off.

1Automatic Brake Hold While the system is activated, you can turn off the power system or park the vehicle through the same procedure as you normally do. 2 When Stopped P. 512
Whether the system is on, or the system is activated, the automatic brake hold turns off once the power system is off.
You may hear an operating noise if the vehicle moves while the automatic brake hold system is in operation.
1Turning on the system Make sure to turn off the automatic brake hold system before using an automated car wash.

Automatic Brake Hold Button

If you want to turn off automatic brake hold while the system is in operation, press the automatic brake hold button with the brake pedal depressed.

Driving

https://manual-hub.com/

509

uuBrakinguAnti-lock Brake System (ABS)

Anti-lock Brake System (ABS)
ABS
Helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than you can.

1Anti-lock Brake System (ABS)
NOTICE The ABS may not function correctly if you use a tire of the incorrect size or type.

The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.
You should never pump the brake pedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as "stomp and steer."
ABS operation The brake pedal may pulsate slightly when the ABS is working. Depress the brake pedal and keep holding the pedal firmly down. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.
ABS may activate when you depress the brake pedal when driving on: · Wet or snow covered roads. · Roads paved with stone. · Roads with uneven surfaces, such as potholes, cracks, manholes, etc.
When the vehicle speed goes under 6 mph (10 km/h), the ABS stops.

If the ABS indicator comes on while driving, there may be a problem with the system. While normal braking will not be affected, there is a possibility that the ABS will not be operating. Have your vehicle checked by a dealer immediately.
The ABS is not designed for the purpose of reducing the time or distance it takes for a vehicle to stop: It is designed to limit brake lockup which can lead to skidding and loss of steering control.
In the following cases, your vehicle may need more distance to stop than a vehicle without the ABS:
· You are driving on rough or uneven road surfaces,
such as gravel or snow.
· The tires are equipped with tire chains.
The following may be observed with the ABS system:
· Motor sounds coming from the engine
compartment when the brakes are applied, or when system checks are being performed after the power system has been started while vehicle accelerates.
· Brake pedal and/or the vehicle body vibration when
ABS activates. These vibrations and sounds are normal to ABS systems and are no cause for concern.

Driving

510

https://manual-hub.com/

Brake Assist System
Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking.
Brake assist system operation Press the brake pedal firmly for more powerful braking.
When brake assist operates, the pedal may wiggle slightly and an operating noise may be heard. This is normal. Keep holding the brake pedal firmly down.

uuBrakinguBrake Assist System

Driving

https://manual-hub.com/

511

Parking Your Vehicle

When Stopped
1. Depress the brake pedal firmly. 2. With the brake pedal depressed, pull up the electric parking brake switch slowly,
but fully. 3. Change the shift position to (P. 4. Turn off the power system.
u The parking brake and brake system indicator (red) goes off in about 30 seconds.

1Parking Your Vehicle
3 WARNING
The vehicle can roll away if left unattended without confirming that Park is engaged.
A vehicle that rolls away could cause a crash resulting in serious injury or death.
Always keep your foot on the brake pedal until you have confirmed that (P is shown on the shift position indicator.

Do not park your vehicle near flammable objects, such as dry grass, oil, or timber. Heat from the exhaust can cause a fire.
1When Stopped
NOTICE The following can damage the driveline:
· Depressing the accelerator and brake pedals
simultaneously.
· Changing into (P before the vehicle stops
completely.
When facing uphill, do not hold the vehicle by depressing the accelerator pedal. Doing so may cause the power system to overheat and fail.

Driving

512

https://manual-hub.com/

Always set the parking brake, in particular if you are parked on an incline.

uuParking Your VehicleuWhen Stopped
1When Stopped In extremely cold temperatures, the parking brake may freeze up if applied. If such temperatures are expected, do not apply the parking brake but, if parking on a slope, either turn the front wheels so they will contact the curb if the vehicle rolls down the slope or block the wheels to keep the vehicle from moving. If you do not take either precaution, the vehicle may roll unexpectedly, leading to a crash.

Driving

https://manual-hub.com/

513

uuParking Your VehicleuParking Sensor System*

Parking Sensor System*
The corner and center sensors monitor obstacles around your vehicle, and the beeper, driver information interface and audio/information screen let you know the approximate distance between your vehicle and the obstacle.

1Parking Sensor System*
Even when the system is on, always confirm if there is no obstacle near your vehicle before parking.

The sensor location and range
Front Corner Sensors Rear Corner Sensors

Front Center Sensors* Rear Center Sensors

The system may not work properly when:
· The sensors are covered with snow, ice, mud, or
dirt.
· The vehicle is on uneven surface, such as grass,
bumps, or a hill.
· The vehicle has been out in hot or cold weather. · The system is affected by devices that emit
ultrasonic waves.
· Driving in bad weather.

Within about 24 in (60 cm) or less

Front*: Within about 39 in (100 cm) or less Rear: Within about 43 in (110 cm) or less

The system may not sense:
· Thin or low objects. · Sonic-absorptive materials, such as snow, cotton,
or sponge.
· Objects directly under the bumper.
Do not put any accessories on or around the sensors.

Driving

514 * Not available on all models

https://manual-hub.com/

uuParking Your VehicleuParking Sensor System*

Parking sensor system on and off With the power mode in ON, press the parking sensor system button to turn on or off the system. The indicator in the button comes on when the system is on.

1Parking Sensor System*
When you set the power mode to ON, the system will be in the previously selected condition.

The front corner, rear corner and rear center sensors start to detect an obstacle when the transmission is in (R, and the vehicle speed is less than 5 mph (8 km/h).

The front center* and front corner sensors start to detect an obstacle when the transmission is in any position other than (P, and the vehicle speed is less than 5 mph (8 km/h).

Driving

* Not available on all models

Continued
https://manual-hub.com/

515

uuParking Your VehicleuParking Sensor System*

Screen Operation
Split View Off

You can switch between split view off and split view on by touching the split screen tab.

1Screen Operation
The split screen tab disappears, and the split view returns to the last camera view mode under the following conditions:
· If the parking sensor system is turned off. · If there is a malfunction in the system.

Split Screen Tab
Split View On

Driving

516

https://manual-hub.com/

uuParking Your VehicleuParking Sensor System*

When the distance between your vehicle and obstacles behind becomes shorter

Interval between beeps

Distance between the Bumper and Obstacle

Corner Sensors

Center Sensors

Indicator

Audio/Information Screen Driver Information Interface

Moderate

Front*: About 39-24 in

Audio/information screen

(100-60 cm) Rear: About 43-24 in

Comes on in Yellow*1

(110-60 cm)

Short Very short

About 24-18 in (60-45 cm)
About 18-14 in (45-35 cm)

Comes on in Amber

Indicators light up where the sensor detects an obstacle.

Continuous

About 14 in (35 cm) or less

Comes on in Red

Indicators light up where the sensor detects an obstacle.
Driver information interface

Driving

*1:At this stage, only the center sensors detect obstacles. * Not available on all models

https://manual-hub.com/

Continued 517

uuParking Your VehicleuParking Sensor System*

Turning off All Rear Sensors
1. Make sure that the parking sensor system is not activated. Set the power mode to VEHICLE OFF.
2. Press and hold the parking sensor system button, and set the power mode to ON. 3. Keep pressing the button for ten seconds. Release the button when the indicator
in the button blinks. u The beeper sounds once. 4. Press the button again. The indicator in the button goes off. u The beeper sounds twice. The rear sensors are now turned off.

1Turning off All Rear Sensors
When you put the transmission into (R, the indicator in the parking sensor system button blinks as a reminder that the rear sensors have been turned off.

To turn the rear sensors on again, follow the above procedure. The beeper sounds three times when the rear sensors come back on.

Driving

518

https://manual-hub.com/

uuParking Your VehicleuCross Traffic Monitor*

Cross Traffic Monitor*
Monitors the rear corner areas using the radar sensors when reversing, and alerts you if a vehicle approaching from a rear corner is detected.
The system is convenient when you are backing out of a parking space.

1Cross Traffic Monitor*
3 CAUTION
Cross Traffic Monitor cannot detect all approaching vehicles and may not detect an approaching vehicle at all.
Failure to visually confirm that it is safe to back up the vehicle before doing so may result in a collision.
Do not solely rely on the system when reversing; always also use your mirrors, and look behind and to the sides of your vehicle before reversing.

Models with parking sensor system
The parking sensor system's alerting buzzer overrides the Cross Traffic Monitor buzzer when the sensors are detecting obstacles at the closest range.

Driving

* Not available on all models

Continued
https://manual-hub.com/

519

uuParking Your VehicleuCross Traffic Monitor*

How the System Works

The system activates when: · The power mode is in ON. · The Cross Traffic Monitor system is turned
on.
2 Cross Traffic Monitor On and Off P. 522
· The transmission is in (R. · Your vehicle is moving at 3 mph (5 km/h) or
lower.

Radar sensors: Underneath the rear bumper corners
When a vehicle is detected approaching from a rear corner, Cross Traffic Monitor alerts you with a buzzer and a displayed warning.

The system will not detect a vehicle that approaches from directly behind your vehicle, nor will it provide alerts about a detected vehicle when it moves directly behind your vehicle.

The system does not provide alerts for a vehicle that is moving away from your vehicle, and it may alert for pedestrians, bicycles, or stationary objects.

1Cross Traffic Monitor*
Cross Traffic Monitor may not detect or may delay alerting an approaching vehicle, or may alert without an approaching vehicle under the following conditions:
· An obstacle, such as another vehicle and a wall,
near your vehicle's rear bumper, is blocking the radar sensor's scope.
· Your vehicle is moving at the speed of about 3 mph
(5 km/h) or higher.
· A vehicle is approaching at the speed other than
between about 6 mph (10 km/h) and 16 mph (25 km/h).
· The system picks up external interference such as
other radar sensors from another vehicle or strong radio wave transmitted from a facility nearby.
· Either corner of the rear bumper is covered with
snow, ice, mud or dirt.
· When there is bad weather. · Your vehicle is on an incline. · Your vehicle is tilted due to a heavy load in the rear. · Your vehicle is reversing towards a wall, a pole, a
vehicle, and so on. The rear bumper or the sensors have been improperly repaired or the rear bumper has been deformed. Have your vehicle checked by a dealer.

For proper operation, always keep the rear bumper corner area clean. Do not cover the rear bumper corner area with labels or stickers of any kind.

Driving

520 * Not available on all models

https://manual-hub.com/

uuParking Your VehicleuCross Traffic Monitor*

When the System Detects a Vehicle
Arrow Icon

1When the System Detects a Vehicle
If the on the lower right changes to in amber when the transmission is in (R, mud, snow or ice, etc. may have accumulated in the vicinity of the sensor. The system is temporarily canceled. Check the bumper corners for any obstructions, and thoroughly clean the area if necessary.

Normal View

Wide View

Top Down View

An arrow icon appears on the side a vehicle is approaching on the audio/information screen.

If the comes on when the transmission is in (R, there may be a problem with the Cross Traffic Monitor system. Do not use the system and have your vehicle checked by a dealer.
If the display remains the same with the transmission in (R, there may be a problem with the rear camera system and the Cross Traffic Monitor system. Do not use the system and have your vehicle checked by a dealer.

Driving

Continued
https://manual-hub.com/

521

uuParking Your VehicleuCross Traffic Monitor*
Cross Traffic Monitor On and Off
You can switch the system on and off using the audio/information screen. 1. Press the button. 2. Select Settings. 3. Select Camera. 4. Select Cross Traffic Monitor. 5. Select ON or OFF, then select Save.
The system can also be turned on and off on the audio/information screen by pressing the Cross Traffic Monitor icon.
$IFDL:PVS4VSSPVOEJOHT
Cross Traffic Monitor Icon

Driving

522

https://manual-hub.com/

Multi-View Rear Camera

About Your Multi-View Rear Camera
The audio/information screen can display your vehicle's rear view. The display automatically changes to the rear view when the transmission is put into (R.
Multi-View Rear Camera Display Area

Approx. 39 inches (1 m) Approx. 20 inches (50 cm)
Guidelines

Wide View Mode Normal View Mode

Camera

Bumper

Top Down View Mode

1About Your Multi-View Rear Camera The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.
Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.
If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.
You can change the Fixed Guideline and Dynamic Guideline settings.
2 Customized Features P. 357
Fixed Guideline ON: Guidelines appear when you put the transmission into (R. OFF: Guidelines do not appear. Dynamic Guideline ON: Guidelines move according to the steering wheel direction. OFF: Guidelines do not move.

Driving

Continued
https://manual-hub.com/

523

uuMulti-View Rear CamerauAbout Your Multi-View Rear Camera
You can view three different camera modes on the audio/information screen. Touch the appropriate icon to switch the modes.
: Wide view mode : Normal view mode : Top down view mode
· If you were last using Wide view mode or Normal view mode, the same view mode will be activated the next time you put the transmission into (R.
· If you were using Top down view mode before turning off the power system, the next time you set the power mode to ON and put the transmission into (R, the view mode you were using just before using Top down view mode (Wide view mode or Normal view mode) will be activated.
· If you were using Top down view mode and 10 seconds elapsed after you took the transmission out of (R, the view mode you were using just before selecting Top down view mode (Wide view mode or Normal view mode) will be activated the next time you put the transmission into (R.

Driving

524

https://manual-hub.com/

Refueling

Fuel Information
Fuel recommendation Unleaded gasoline, pump octane number 87 or higher
Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise that can lead to engine damage.
Top tier detergent gasoline Because the level of detergency and additives in gasoline vary in the market, Honda endorses the use of "TOP TIER Detergent Gasoline" where available to help maintain the performance and reliability of your vehicle. TOP TIER Detergent Gasoline meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today's advanced engines.
Qualifying gasoline retailers will, in most cases, identify their gasoline as having met "TOP TIER Detergent Gasoline" standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid buildup of deposits in your engine and emission control system.
For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit www.hondacars.com. In Canada, visit www.honda.ca for additional information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com.

1Fuel Information
NOTICE We recommend quality gasoline containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend the use of gasoline that does NOT contain harmful manganese-based fuel additives such as MMT, if such gasoline is available.
Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact a dealer for service. Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 15% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.

Fuel tank capacity: 12.81 US gal (48.5 L)

Driving

https://manual-hub.com/

525

uuRefuelinguHow to Refuel

How to Refuel

Your fuel tank is not equipped with a fuel filler cap. You can insert the filler nozzle

directly into the filler neck. The tank seals itself again when you pull out the filler

nozzle.

1. Stop your vehicle with the service station

pump on the left side of the vehicle in the

rear.

2. Turn off the power system.

3. Unlock the driver's door.

u The fuel fill door on the outer side of the

Press

Fuel Fill Door

vehicle will unlock. 4. Press and release the area indicated by the
arrow to release the fuel fill door. You will

here a click and the lid will open slightly.

5. Manually pull the fuel fill door to a fully

open position.

1How to Refuel
3 WARNING
Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.
· Turn the power system off, and keep heat, sparks, and flames away.
· Handle fuel only outdoors. · Wipe up spills immediately.
The fuel filler opening is designed to accept only service station filler nozzles for refueling. Use of smaller diameter tubes (e.g., those used to siphon fuel for other uses) or other non-service station devices can damage the area in and around the filler opening.

Use the master door lock switch to unlock the fuel fill door. The vehicle doors and fuel fill door automatically relock if the remote unlock function is used. This can be deactivated by briefly opening then closing the driver's door.

Driving

526

https://manual-hub.com/

uuRefuelinguHow to Refuel

6. Place the end of the filler nozzle on the lower part of filler opening, then insert it slowly and fully. u Make sure that the end of the filler nozzle goes down along with the filler pipe. u Keep the filler nozzle level. u When the tank is full, the filler nozzle will click off automatically. u After filling, wait about five seconds before removing the filler nozzle.
7. Shut the fuel fill door by hand.

1How to Refuel If the filler nozzle keeps turning off when the tank is not full, there may be a problem with the pump's fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer.
The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature.
Do not continue to add fuel after the filler nozzle has automatically stopped. Additional fuel can exceed the full tank capacity.
If you have to refuel your vehicle from a portable container, use the funnel provided with your vehicle.
2 Refueling From a Portable Fuel Container P. 623

Driving

https://manual-hub.com/

527

Fuel Economy and CO2 Emissions
Improving Fuel Economy and Reducing CO2 Emissions
Achieving fuel economy and reducing CO2 emissions is dependent on several factors, including driving conditions, load weight, idling time, driving habits, and vehicle condition. Depending on these and other factors, you may not achieve the rated fuel economy of this vehicle.
Maintenance and Fuel Economy
You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the driver information interface. · Use engine oil with the viscosity recommended.
2 Recommended Engine Oil P. 542
· Maintain the specified tire pressure. · Do not load the vehicle with excess cargo. · Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside
adds weight and increases wind resistance.

1Improving Fuel Economy and Reducing CO2 Emissions Direct calculation is the recommended method to determine actual fuel consumed while driving.

Miles driven 100

Gallons of fuel
Liter

Miles per Gallon
Kilometers

L per 100 km

In Canada, posted fuel economy numbers are established following a simulated test. For more information on how this test is performed, please visit https://www.nrcan.gc.ca and search for "fuel consumption testing" in the search field at the top of the page.

Driving

528

https://manual-hub.com/

Maintenance
This chapter discusses basic maintenance.

Before Performing Maintenance Inspection and Maintenance ............ 530 Safety When Performing Maintenance .... 531 Parts and Fluids Used in Maintenance Service ........................................... 532
Maintenance MinderTM ..................... 533 Maintenance Under the Hood
Maintenance Items Under the Hood .... 540 Opening the Hood ........................... 541 Recommended Engine Oil ................ 542 Oil Check ......................................... 543 Adding Engine Oil ............................ 544

Changing the Engine Oil and Oil Filter..... 545 Cooling System................................ 547 Inverter Coolant............................... 549 Transmission Fluid............................ 550 Brake Fluid....................................... 551 Refilling Window Washer Fluid......... 552 Replacing Light Bulbs ....................... 553 Checking and Maintaining Wiper Blades.... 561 Checking and Maintaining Tires Checking Tires ................................. 564 Tire and Loading Information Label .. 565 Tire Labeling .................................... 565 DOT Tire Quality Grading (U.S. Vehicles).. 567
https://manual-hub.com/

Wear Indicators ............................... 569 Tire Service Life................................ 569 Tire and Wheel Replacement ........... 570 Tire Rotation.................................... 571 Winter Tires ..................................... 572 12-Volt Battery ................................. 573 Remote Transmitter Care Replacing the Remote Battery .......... 575 Climate Control System Maintenance .... 576 Cleaning Interior Care .................................... 577 Exterior Care.................................... 579 Accessories and Modifications ........ 582

529

Before Performing Maintenance

Inspection and Maintenance

For your safety, perform all listed inspections and maintenance to keep your vehicle in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.)
Types of Inspection and Maintenance
Routine inspections Perform inspections before long distance trips, when washing the vehicle, or when refueling.
2 Maintenance P. 33
Periodic inspections · Check the brake fluid level monthly.
2 Brake Fluid P. 551
· Check the tire pressure monthly. Examine the tread for wear and foreign objects.
2 Checking and Maintaining Tires P. 564
· Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs P. 553
· Check the condition of the wiper blades at least every six months.
2 Checking and Maintaining Wiper Blades P. 561

1Inspection and Maintenance
U.S. models
Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individuals using parts that are "certified" to EPA standards.
According to state and federal regulations, failure to perform maintenance on the maintenance main items marked with # will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the driver information interface.
2 Maintenance Service Items P. 537
If you want to perform complex maintenance tasks that require more skills and tools, you can purchase a subscription to the Service Express website at www.techinfo.honda.com.
2 Authorized Manuals P. 636
If you want to perform maintenance yourself, make sure that you have the necessary tools and skills first. After performing maintenance, update the records in the separate maintenance booklet.

Maintenance

530

https://manual-hub.com/

uuBefore Performing MaintenanceuSafety When Performing Maintenance

Safety When Performing Maintenance

Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether you should perform a given task.
Maintenance Safety
· To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the 12-volt battery, all High Voltage system, and all fuel related parts.
· Never leave rags, towels, or other flammable objects under the hood. u Heat from the engine and exhaust can ignite them, causing a fire.
· To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.
· Wear eye protection and protective clothing when working with the 12-volt battery or compressed air.
· Engine exhaust contains carbon monoxide, which is poisonous and can kill you. u Only operate the engine if there is sufficient ventilation.

1Safety When Performing Maintenance
3 WARNING
Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.
Always follow the inspection and maintenance recommendations according to the schedules in this owner's manual.
3 WARNING
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner's manual.

Maintenance

Continued
https://manual-hub.com/

531

uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service

Vehicle Safety
· The vehicle must be in a stationary condition. u Make sure your vehicle is parked on level ground, the parking brake is set, and the power system is turned off.
· Be aware that hot parts can burn you. u Make sure to let the power system including the engine and exhaust system cool thoroughly before touching vehicle parts.
· Be aware that moving parts can injure you. u Do not activate the power system unless instructed, and keep your hands and limbs away from moving parts. When the power system is on, the engine can automatically start, or the radiator fan may start operating without the engine running.
· Do not touch the high-voltage battery and wiring (orange).

Parts and Fluids Used in Maintenance Service
The use of Honda genuine parts and fluids is recommended when maintaining and servicing your vehicle. Honda genuine parts are manufactured according to the same high quality standards used in Honda vehicles.

1Parts and Fluids Used in Maintenance Service
NOTICE Do not press the engine cover forcibly. This may damage the engine cover and component parts.

Maintenance

532

https://manual-hub.com/

Maintenance MinderTM
If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the driver information interface every time you set the power mode to ON. The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.

Maintenance

https://manual-hub.com/

533

uuMaintenance MinderTMuTo Use Maintenance MinderTM

To Use Maintenance MinderTM
Displaying the Maintenance Minder Information
Maintenance items, which should be serviced at the same time that you replace the engine oil, appear on the driver information interface. You can view them on the engine oil life screen at any time. 1. Set the power mode to ON. 2. Press the (home) button. 3. Roll the left selector wheel until is displayed. 4. Press the left selector wheel to go to the Maintenance Minder screen. The engine
oil life appears on the driver information interface along with maintenance items due soon.

Engine Oil Life

(home) Button Left Selector Wheel

Main Item

Sub Item

1Displaying the Maintenance Minder Information
Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.

Displayed Engine Oil Life (%) 100 90 80 70 60 50 40 30 20 15 10 5 0

Calculated Engine Oil Life (%) 100 to 91 90 to 81 80 to 71 70 to 61 60 to 51 50 to 41 40 to 31 30 to 21 20 to 16 15 to 11 10 to 6 5 to 1 0

There is a list of maintenance main and sub items you can view on the driver information interface.
2 Maintenance Service Items P. 537

Maintenance

534

https://manual-hub.com/

uuMaintenance MinderTMuTo Use Maintenance MinderTM

Maintenance Minder Messages on the Driver Information Interface

Maintenance Message --

Oil Life Display

Explanation
When you select the Maintenance Minder screen, it displays codes for maintenance items due at the next engine oil change, along with the percentage of engine oil life remaining.

Information --

Maintenance Due Soon

15 %

The engine oil life indicator starts to appear along with other duesoon maintenance item codes when the remaining oil life drops to 15 percent.

The engine oil is approaching the end of its service life.

Maintenance

https://manual-hub.com/

Continued 535

uuMaintenance MinderTMuTo Use Maintenance MinderTM

Maintenance Message Maintenance Due Now

Oil Life Display 5 %

Explanation

Information

The remaining engine oil life is 5 to The engine oil has almost reached the

1 percent. Press the (home) end of its service life, and the

button to switch to another

maintenance items should be

display.

inspected and serviced as soon as

possible.

Maintenance Past Due

Negative Distance

The engine oil has passed its

The engine oil life has passed.

service life, and a negative

The maintenance items must be

distance appears after driving over inspected and serviced immediately.

10 miles (U.S. models) or 10 km

(Canadian models). The negative

distance on the display blinks.

The system message indicator ( ) comes on along with the Maintenance Minder message.

Maintenance

536

https://manual-hub.com/

Maintenance Service Items
System Message Indicator

uuMaintenance MinderTMuTo Use Maintenance MinderTM

Maintenance Minder Message

1Maintenance Service Items
· Adjust the valves during services A, B, 1, 2, or 3 if
they are noisy.

Main Item

Sub Items

U.S. models

CODE A B

Maintenance Main Items · Replace engine oil*1
· Replace engine oil*1 and oil filter · Inspect front and rear brakes · Check expiry date for tire repair kit bottle · Inspect tie rod ends, steering gearbox, and boots · Inspect suspension components · Inspect driveshaft boots · Inspect brake hoses and lines (Including ABS/VSA®) · Inspect all fluid levels and condition of fluids · Inspect exhaust system# · Inspect fuel lines and connections#

*1: If a Maintenance Minder message does not appear more than 12 months after the display is reset, change the engine oil every year.
# : See information on maintenance and emissions warranty.

CODE 1 2
3 4
5 7

*2: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km). *3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and
from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km). *4: Driving in mountainous areas at very low vehicle speeds results in higher transmission temperatures.
This requires transmission fluid changes more frequently than recommended by the Maintenance Minder. If you regularly drive your vehicle under these conditions, have the transmission fluid changed every 47,500 miles (76,000 kilometers) or 3 years. *5: If a Maintenance Minder message does not appear more than 36 months after the display for item 7 is reset, change the brake fluid every 3 years.
Continued

https://manual-hub.com/

Maintenance

537

uuMaintenance MinderTMuTo Use Maintenance MinderTM

Canadian models

1Maintenance Service Items
· Adjust the valves during services A, 0, 9, 1, 2, or 3
if they are noisy.

CODE

Maintenance Main Items

A · Replace engine oil*1

0 · Replace engine oil*1 and oil filter

*1: If a Maintenance Minder message does not appear more than 12 months after the display is reset, change the engine oil every year.
*2: If you drive in dusty conditions, replace the air cleaner element every 24,000 km (15,000 miles). *3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and
from diesel-powered vehicles, replace the dust and pollen filter every 24,000 km (15,000 miles). *4: Driving in mountainous areas at very low vehicle speeds results in higher transmission temperatures.
This requires transmission fluid changes more frequently than recommended by the Maintenance Minder. If you regularly drive your vehicle under these conditions, have the transmission fluid changed at 76,000 kilometers (47,500 miles) or 3 years. *5: If a Maintenance Minder message does not appear more than 36 months after the display for item 7 is reset, change the brake fluid every 3 years. # : See information on maintenance and emissions warranty.

CODE 1 2
3 4
5 7 9

Maintenance Sub Items · Rotate tires · Replace air cleaner element*2 · Replace dust and pollen filter*3 · Replace transmission fluid*4 · Replace spark plugs · Inspect valve clearance · Replace engine coolant · Replace brake fluid*5 · Service front and rear brakes · Check expiry date for tire repair kit bottle · Inspect tie rod ends, steering gearbox, and boots · Inspect suspension components · Inspect driveshaft boots · Inspect brake hoses and lines (including ABS/VSA®) · Inspect all fluid levels and condition of fluids · Inspect exhaust system# · Inspect fuel lines and connections#

Maintenance

538

https://manual-hub.com/

uuMaintenance MinderTMuTo Use Maintenance MinderTM

Resetting the Display
Reset the maintenance minder information display if you have performed the maintenance service.
Engine Oil Life

1Resetting the Display
NOTICE Failure to reset the Maintenance MinderTM display after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.

The dealer will reset the Maintenance MinderTM display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the Maintenance MinderTM display yourself.

Left Selector Wheel
Maintenance Item Codes
1. Go to the Maintenance Minder screen.
2 Displaying the Maintenance Minder Information P. 534
2. Press and hold the left selector wheel. u The Maintenance MinderTM reset mode is displayed on the driver information interface.
3. To reset all due items at once, select All Due Items with the left selector wheel, then press the left selector wheel. u The displayed maintenance items disappear. To reset each item separately, select Item # Only with the left selector wheel, then press the left selector wheel. u The displayed maintenance item (i.e. #) disappears.

You can also reset the Maintenance MinderTM display using the audio/information screen.
2 Customized Features P. 357

Maintenance

To cancel the Maintenance MinderTM reset mode, select Cancel, then press the left selector wheel.
https://manual-hub.com/

539

Maintenance Under the Hood
Maintenance Items Under the Hood

Maintenance

Engine Oil Dipstick (Orange) Engine Oil Fill Cap Washer Fluid (Blue Cap)
Engine Coolant Reserve Tank
540

Radiator Cap
https://manual-hub.com/

Brake Fluid (Black Cap) Inverter Coolant Filler Tank
12-Volt Battery

uuMaintenance Under the HooduOpening the Hood

Opening the Hood
Hood Release Handle
Pull Lever

Support Rod

Grip

Clamp

1. Park the vehicle on a level surface, and set the parking brake.
2. Pull the hood release handle under the driver's side lower corner of the dashboard. u The hood will pop up slightly.

1Opening the Hood
3 WARNING
The hood support rod can become very hot due to heat from the engine.

3. Push the hood latch lever (located under the front edge of the hood to the center) to the side and raise the hood. Once you have raised the hood slightly, you can release the lever.

To ensure against possible burns, do not handle the metal section of the rod: Use the foam grip instead.
NOTICE Do not open the hood when the wiper arms are raised. The hood will strike the wipers, resulting in possible damage to the hood and/or the wipers.

4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood.
When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.

NOTICE Do not press the engine cover forcibly. This may damage the engine cover and component parts.
When closing the hood, check that the hood is securely latched.
If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.

Maintenance

https://manual-hub.com/

541

uuMaintenance Under the HooduRecommended Engine Oil

Recommended Engine Oil
· Honda Genuine Motor Oil · Premium-grade 0W-20 detergent oil with an API Certification Seal on the
container.
Oil is a major contributor to your engine's performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.

1Recommended Engine Oil
Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability.

This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute's latest requirements.

Use Honda Genuine Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown here.

Maintenance

Ambient Temperature
Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade.

542

https://manual-hub.com/

uuMaintenance Under the HooduOil Check

Oil Check
We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Turn off the power system. You can check the oil level without the engine having run beforehand. If the engine has been running, wait approximately three minutes before you check the oil.
1. Remove the dipstick (orange). 2. Wipe the dipstick with a clean cloth or
paper towel. 3. Insert the dipstick back all the way into its
hole.

1Oil Check
If the oil level is near or below the lower mark, slowly add oil, being careful not to overfill.

4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary.
Upper Mark Lower Mark

Maintenance

https://manual-hub.com/

543

uuMaintenance Under the HooduAdding Engine Oil

Adding Engine Oil
Engine Oil Fill Cap

1. Unscrew and remove the engine oil fill cap. 2. Add oil slowly. 3. Reinstall the engine oil fill cap, and tighten
it securely. 4. Wait for three minutes and recheck the
engine oil dipstick.

1Adding Engine Oil
NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil may result in leaks and engine damage.
If any oil spills, wipe it away immediately. Spilled oil may damage the engine compartment components.

Maintenance

544

https://manual-hub.com/

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter

Changing the Engine Oil and Oil Filter

You must change the engine oil and oil filter regularly in order to maintain the engine's lubrication. The engine may be damaged if they are not changed regularly.
Turning the power system on automatically starts the engine if the High Voltage battery charge level gauge shows two segments or less.
2 High Voltage Battery Charge Level Gauge P. 142
Change the oil and filter in accordance with the maintenance message on the driver information interface.

1Changing the Engine Oil and Oil Filter
NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.

Washer

1. Run the engine until it reaches normal operating temperature, and then turn the engine off.
2. Open the hood and remove the engine oil fill cap.
3. Remove the Phillips-head screws and slotted head screws by turning 90° counter-clockwise on the undercarriage and remove the under cover.
4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container.

Drain Bolt

Maintenance

Continued
https://manual-hub.com/

545

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter

Oil Filter

5. Remove the oil filter and dispose of the remaining oil.
6. Check that the filter gasket is not stuck to the engine contact surface. u If it is stuck, you must detach it.
7. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter. u Apply a light coat of new engine oil to the filter gasket.
8. Put a new washer on the drain bolt, then reinstall the drain bolt. u Tightening torque: 30 lbfft (40 Nm, 4.0 kgfm)
9. Pour the recommended engine oil into the engine. u Engine oil change capacity (including filter): 4.0 US qt (3.8 L)
10. Reinstall the engine oil fill cap securely and start the engine.
11. Run the engine for a few minutes, and then check that there is no leak from the drain bolt or oil filter.
12. Stop the engine, wait for three minutes, and then check the oil level on the dipstick. u If necessary, add more engine oil.

1Changing the Engine Oil and Oil Filter You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer.
When installing the new oil filter, follow the instructions supplied with the oil filter.
Reinstall the engine oil fill cap. Start the engine. If the low oil pressure warning appears, turn off the engine, and check your work.

Maintenance

546

https://manual-hub.com/

uuMaintenance Under the HooduCooling System

Cooling System
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.

We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.

Reserve Tank
Reserve Tank
MAX MIN

1. Make sure the engine and radiator are cool.
2. Check the amount of coolant in the reserve tank. u If the coolant level is below the MIN mark, add the specified coolant until it reaches the MAX mark.
3. Inspect the cooling system for leaks.

1Cooling System
3 WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
NOTICE Genuine Honda engine coolant is a 50/50 mixture of antifreeze and water that can withstand freezing at temperatures as low as about -31°F (-35°C). If your vehicle is consistently subjected to temperatures below this, the concentration of antifreeze in the coolant should be increased. Consult a dealer for details.
If Honda antifreeze/coolant is not available, you may use another major brand of non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

Do not add rust inhibitors or other additives to your vehicle's cooling system. They may not be compatible with the coolant or with the engine components.

Maintenance

Continued
https://manual-hub.com/

547

uuMaintenance Under the HooduCooling System

Radiator

Radiator Cap

1. Make sure the engine and radiator are cool.
2. Turn the radiator cap 1/8 turn counterclockwise and relieve any pressure in the cooling system.
3. Push down and turn the radiator cap counter-clockwise to remove it.
4. The coolant level should be up to the base of the filler neck. Add coolant if it is low.
5. Put the radiator cap back on, and tighten it fully.

1Radiator
NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.

Maintenance

548

https://manual-hub.com/

uuMaintenance Under the HooduInverter Coolant

Inverter Coolant
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.

We recommend you check the inverter coolant level every time you refuel.

Have a dealer replace the inverter coolant.

Checking the Coolant
Filler Tank
MAX MIN

1. Check the fluid level in the tank. 2. If the coolant level has dropped below the
MIN level, have your vehicle serviced at a dealer. u Only a properly trained technician can
refill the coolant and check the system for leaks.

1Inverter Coolant
NOTICE Genuine Honda engine coolant is a 50/50 mixture of antifreeze and water that can withstand freezing at temperatures as low as about -31°F (-35°C). If your vehicle is consistently subjected to temperatures below this, the concentration of antifreeze in the coolant should be increased. Consult a dealer for details.
If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.
Do not add rust inhibitors or other additives to your vehicle's coolant system. They may not be compatible with the coolant or with the motor components.

Maintenance

https://manual-hub.com/

549

uuMaintenance Under the HooduTransmission Fluid
Transmission Fluid
Specified fluid: Honda ATF DW-1 (automatic transmission fluid) Have a dealer check the fluid level and replace if necessary. Do not attempt to check or change the transmission fluid yourself.

1Transmission Fluid
NOTICE Do not mix Honda ATF DW-1 with other transmission fluids. Using a transmission fluid other than Honda ATF DW-1 may adversely affect the operation and durability of your vehicle's transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda ATF DW-1 is not covered by Honda's new vehicle limited warranty.

Maintenance

550

https://manual-hub.com/

Brake Fluid

Specified fluid: Honda Heavy Duty Brake Fluid DOT 3

Checking the Brake Fluid

Reserve Tank

MAX

The fluid level should be between the MIN and MAX marks on the side of the reserve tank.

MIN

uuMaintenance Under the HooduBrake Fluid
1Brake Fluid NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage.
If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.
Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.
If the brake fluid level is at or below the MIN mark, have a dealer inspect the vehicle for leaks or worn brake pads as soon as possible.

Maintenance

https://manual-hub.com/

551

uuMaintenance Under the HooduRefilling Window Washer Fluid

Refilling Window Washer Fluid
Check the amount of window washer fluid by looking at the reservoir. If the level is low, fill the washer reservoir.
Canadian models
If the washer fluid is low, a message appears on the driver information interface.
Pour the washer fluid carefully. Do not overflow the reservoir.

1Refilling Window Washer Fluid
NOTICE Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle's paint. A vinegar/water solution can damage the windshield washer pump. Use only commercially available windshield washer fluid. Avoid prolonged use of hard water to prevent lime scale buildup.

Maintenance

552

https://manual-hub.com/

Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs. High beam headlight: LED type* High beam headlight: 60 W (HB3 for halogen bulb type)* Low beam headlight: LED type

1Headlight Bulbs
Models with halogen high beam headlights NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
All models
The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk, have the aiming readjusted at a dealer or by a qualified technician.
Models with halogen high beam headlights
When replacing a halogen bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

Maintenance

* Not available on all models

Continued
https://manual-hub.com/

553

uuReplacing Light BulbsuHeadlight Bulbs

High Beam Headlights

Models with halogen high beam headlights

Holding clip

Passenger side
1. Remove the hose and the holding clip using a flat-tip screwdriver, then remove the upper part of the window washer reservoir. u Check the amount of window washer fluid is below the upper part of the window washer reservoir and remove it.

1High Beam Headlights
Models with LED high beam headlights
High beam headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip.

Hose Tab
Coupler

Both sides

Bulb

2. Push the tab to remove the coupler.

3. Rotate the old bulb counter-clockwise to

remove.

4. Insert a new bulb into the headlight

assembly and turn it clockwise. 5. Insert the coupler into the connector of the

Insert the clip with the pin raised, and push until it is flat.

bulb.

Low Beam Headlights
Low beam headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Push until the pin is flat.

Maintenance

554

https://manual-hub.com/

Fog Lights*
Fog lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Parking/Daytime Running Lights
Parking/daytime running lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Front Turn Signal Lights
Front turn signal lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Front Side Marker Lights
Front side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Side Turn Signal/Emergency Indicator Lights*
Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

uuReplacing Light BulbsuFog Lights*

Maintenance

* Not available on all models

https://manual-hub.com/

555

uuReplacing Light BulbsuBrake Lights, Taillights, Rear Side Marker Lights, and Rear Turn Signal Light Bulbs

Brake Lights, Taillights, Rear Side Marker Lights, and Rear Turn Signal Light Bulbs
When replacing, use the following bulbs.
Brake Light: LED Taillight: LED Rear Side Marker Light: LED Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover. u Wrap the flat-tip screwdriver with a cloth to prevent scratches.

1Brake Lights, Taillights, Rear Side Marker Lights, and Rear Turn Signal Light Bulbs
Brake lights, taillights, and rear side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Cover

2. Remove the bolts. 3. Pull the light assembly out of the rear pillar.

Maintenance

Bolts
556

https://manual-hub.com/

uuReplacing Light BulbsuBrake Lights, Taillights, Rear Side Marker Lights, and Rear Turn Signal Light Bulbs

4. Turn the socket counter-clockwise and

Bulb

remove it.

5. Push and turn the old bulb clockwise and

remove it, and insert a new bulb.

Socket

Maintenance

https://manual-hub.com/

557

uuReplacing Light BulbsuTaillights, Brake Lights*, and Back-Up Light Bulbs

Taillights, Brake Lights*, and Back-Up Light Bulbs

When replacing, use the following bulbs.
Taillight: LED Brake Light*: LED Back-Up Light: 16 W

Holding Clip

1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back.

1Taillights, Brake Lights*, and Back-Up Light Bulbs Taillights and brake lights* are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip.

Clip

Bulb

Driver side
2. Turn the socket counter-clockwise and remove it.
3. Remove the old bulb and insert a new bulb.

Insert the clip with the pin raised, and push until it is flat.

Socket

Push until the pin is flat.

Maintenance

558 * Not available on all models

https://manual-hub.com/

Socket

uuReplacing Light BulbsuTaillights, Brake Lights*, and Back-Up Light Bulbs
Passenger side
2. Turn the socket clockwise and remove it. 3. Remove the old bulb and insert a new bulb.
Bulb

Maintenance

https://manual-hub.com/

559

uuReplacing Light BulbsuRear License Plate Light
Rear License Plate Light
Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
High-Mount Brake Light
High-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Maintenance

560

https://manual-hub.com/

Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and the hard surfaces of the blade may scratch the window glass.

Changing the Wiper Blade Rubber
1. Set the power mode to VEHICLE OFF. 2. While holding the wiper switch in the
MIST position, set the power mode to ON, then to VEHICLE OFF. u Both wiper arms are set to the
maintenance position as shown in the image.

1Changing the Wiper Blade Rubber
NOTICE Avoid dropping the wiper arm onto the windshield, it may damage the wiper arm and/or the windshield.

3. Lift the driver side wiper arm first, then the passenger side.

Maintenance

Continued
https://manual-hub.com/

561

uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber
4. Press up on and hold the tab, then slide the holder off the wiper arm.

Tab

Wiper Blade

5. Pull the end of the wiper blade in the direction of the arrow in the image until it is out of the holder's end cap.

End Cap At The Bottom
Wiper Blade

6. Pull the wiper blade in the opposite direction to slide it out of the holder.

Maintenance

Holder
562

https://manual-hub.com/

uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber

7. Insert the flat side of the new wiper blade

onto the bottom part of the holder. Insert

Wiper Blade

the blade all the way. 8. Install the end of the wiper blade into the

cap.

Holder

9. Slide the holder onto the wiper arm until it locks.

10. Lower the passenger side wiper arm first,

Cap

then the driver side.

11. Set the power mode to ON and hold the

wiper switch in the MIST position until

both wiper arms return to the standard

position.

Maintenance

https://manual-hub.com/

563

Checking and Maintaining Tires

Checking Tires
To safely operate your vehicle, your tires must be of the proper type and size, in good condition with adequate tread, and properly inflated.
Inflation guidelines Properly inflated tires provide the best combination of handling, tread life, and comfort. Refer to the driver's doorjamb label or specifications page for the specified pressure.
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from overheating.

1Checking Tires
3 WARNING
Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
Follow all instructions in this owner's manual regarding tire inflation and maintenance.

Maintenance

Overinflated tires make your vehicle ride harshly, are more prone to road hazards, and wear unevenly.
Every day before you drive, look at each of the tires. If one looks lower than the others, check the pressure with a tire gauge.
At least once a month or before long trips, use a gauge to measure the pressure in all tires. Even tires in good condition can lose 12 psi (1020 kPa, 0.10.2 kgf/cm2) per month.
Inspection guidelines Every time you check inflation, also examine the tires and valve stems. Look for: · Bumps or bulges on the side or in the tread. Replace the tire if you find any cuts,
splits, or cracks in the side of the tire. Replace it if you see fabric or cord. · Remove any foreign objects and inspect for air leaks. · Uneven tread wear. Have a dealer check the wheel alignment. · Excessive tread wear.
2 Wear Indicators P. 569
· Cracks or other damage around valve stem.
564
https://manual-hub.com/

Measure the air pressure when tires are cold. This means the vehicle has been parked for at least three hours, or driven less than 1 mile (1.6 km). If necessary, add or release air until the specified pressure is reached.
If checked when hot, tire pressure can be as much as 46 psi (3040 kPa, 0.30.4 kgf/cm2) higher than if checked when cold.
Whenever tire pressure is adjusted, you must calibrate the TPMS.
2 TPMS Calibration P. 439
Have a dealer check the tires if you feel a consistent vibration while driving. New tires and any that have been removed and reinstalled should be properly balanced.

uuChecking and Maintaining TiresuTire and Loading Information Label

Tire and Loading Information Label
The label attached to the driver's doorjamb provides necessary tire and loading information.
Label Example

1Tire and Loading Information Label
The tire and loading information label attached to the driver's doorjamb contains: a The number of people your vehicle can carry. b The total weight your vehicle can carry. Do not
exceed this weight. c The original tire sizes for front, rear, and spare. d The proper cold tire pressure for front, rear, and
spare.

Maintenance

Tire Labeling

Example

Tire Size
Tire Identification Number (TIN)

Maximum Tire Load
Maximum Tire Pressure Tire Size

The tires that came on your vehicle have a number of markings. Those you should be aware of are described as shown.

Tire Sizes
Whenever tires are replaced, they should be replaced with tires of the same size.

1Tire Sizes
Following is an example of tire size with an explanation of what each component means. 225/50R17 94V 225: Tire width in millimeters. 50: Aspect ratio (the tire's section height as a percentage of its width). R: Tire construction code (R indicates radial). 17: Rim diameter in inches. 94: Load index (a numerical code associated with the maximum load the tire can carry). V: Speed symbol (an alphabetical code indicating the maximum speed rating).

Continued
https://manual-hub.com/

565

uuChecking and Maintaining TiresuTire Labeling

Tire Identification Number (TIN)
The tire identification number (TIN) is a group of numbers and letters that look like the example in the side column. TIN is located on the sidewall of the tire.
Glossary of Tire Terminology
Cold Tire Pressure The tire air pressure when the vehicle has been parked for at least three hours or driven less than 1 mile (1.6 km). Load Rating Means the maximum load that a tire is rated to carry for a given inflation pressure. Maximum Inflation Pressure The maximum tire air pressure that the tire can hold. Maximum Load Rating Means the load rating for a tire at the maximum permissible inflation pressure for that tire. Recommended Inflation Pressure The cold tire inflation pressure recommended by the manufacturer. Treadwear Indicators (TWI) Means the projections within the principal grooves designed to give a visual indication of the degrees of wear of the tread.

1Tire Identification Number (TIN)
DOT B97R FW6X 2209 DOT: This indicates that the tire meets all requirements of the U.S. Department of Transportation. B97R: Manufacturer's identification mark. FW6X: Tire type code. 22 09: Date of manufacture.
Year Week

Maintenance

566

https://manual-hub.com/

uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)

DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings.

Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
Treadwear
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate.

1Uniform Tire Quality Grading
For example: Treadwear 200 Traction AA Temperature A
All passenger car tires must conform to Federal Safety Requirements in addition to these grades.

Maintenance

Continued
https://manual-hub.com/

567

uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)

Traction
The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

1Traction
Warning: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.

Temperature
The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.

1Temperature
Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.

Maintenance

568

https://manual-hub.com/

uuChecking and Maintaining TiresuWear Indicators

Wear Indicators
Example of a Wear Indicator mark

The groove where the wear indicator is located is about 1/16 inch (about 1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire. Worn out tires have poor traction on wet roads.

Tire Service Life
The life of your tires is dependent on many factors, including driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (even when the tires are not in use).

1Checking Tires

High speed driving

We recommend that you do not drive faster than the

posted speed limits and conditions allow. If you drive

at sustained high speeds (over 99 mph or 160 km/h),

adjust the cold tire pressures as shown below to

avoid excessive heat buildup and sudden tire failure.

Models with 225/50R17 tires

Tire Size

225/50R17 94V

Pressure

Front: 35 psi (240 kPa, 2.4 kgf/cm2)

Rear: 33 psi (230 kPa, 2.3 kgf/cm2)

Models with 235/40R19 tires

Tire Size

235/40R19 96V

Pressure

Front: 36 psi (250 kPa, 2.5 kgf/cm2)

Rear: 36 psi (250 kPa, 2.5 kgf/cm2)

In addition to regular inspections and inflation pressure maintenance, it is recommended that you have annual inspections performed once the tires reach five years old. All tires should be removed from service after 10 years from the date of manufacture, regardless of their condition or state of wear.

Maintenance

https://manual-hub.com/

569

uuChecking and Maintaining TiresuTire and Wheel Replacement

Tire and Wheel Replacement
Replace your tires with radials of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire's sidewall). Using tires of a different size or construction can cause certain vehicle systems such as the ABS and Vehicle Stability AssistTM (VSA®) system to work incorrectly.
It is best to replace all four tires at the same time. If that isn't possible, replace the front or rear tires in pairs.

1Tire and Wheel Replacement
3 WARNING
Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed.

Make sure that the wheel's specifications match those of the original wheels.

Always use the size and type of tires recommended in this owner's manual.

Maintenance

570

https://manual-hub.com/

Tire Rotation
Rotating tires according to the maintenance messages on the driver information interface helps to distribute wear more evenly and increase tire life.
Tires without rotation marks Rotate the tires as shown here.

uuChecking and Maintaining TiresuTire Rotation
1Tire Rotation Tires with directional tread patterns should only be rotated front to back (not from one side to the other). Directional tires should be mounted with the rotation indication mark facing forward, as shown below.

Front

Direction Mark

Tires with rotation marks

Rotate the tires as shown here.

Front

Whenever tires are rotated, you must calibrate the TPMS.
2 TPMS Calibration P. 439

Maintenance

https://manual-hub.com/

571

uuChecking and Maintaining TiresuWinter Tires

Winter Tires
If driving on snowy or frozen roads, mount all season marked M+S tires, snow tires, or tire chains; reduce speed; and maintain sufficient distance between vehicles when driving.
Be particularly careful when operating the steering wheel or brakes to prevent skidding.
Use tire chains, snow tires, or all season tires when necessary or according to the law.
When mounting, refer to the following points.

1Winter Tires
3 WARNING
Using the wrong chains, or not properly installing chains, can damage the brake lines and cause a crash in which you can be seriously injured or killed.
Follow all instructions in this owner's manual regarding the selection and use of tire chains.

For winter tires: · Select the size and load ranges that are the same as the original tires. · Mount the tires to all four wheels. For tire chains: · Install them on the front tires only. · Because your vehicle has limited tire clearance, we strongly recommend using the
chains listed below:
Models with 225/50R17 tires
Cable-type: SCC Radial Chain SC1036
Models with 235/40R19 tires
Cable-type: (Not available)
· Follow the chain manufacturer's instruction when installing. Mount them as tightly as you can.
· Check that the chains do not touch the brake lines or suspension. · Drive slowly.

NOTICE Traction devices that are the wrong size or improperly installed can damage your vehicle's brake lines, suspension, body, and wheels. Stop driving if they are hitting any part of the vehicle.
When tire chains are mounted, follow the chain manufacture's instructions regarding vehicle operational limits.
If your vehicle is equipped with summer tires, be aware that these tires are not designed for winter driving conditions. For more information, contact a dealer.

Maintenance

572

https://manual-hub.com/

12-Volt Battery

Checking the 12-Volt Battery
The condition of the battery is monitored by a sensor located on the negative terminal of the battery. If there is a problem with this sensor, the driver information interface will display a warning message. If this happens, have your vehicle inspected by a dealer.
Check the battery terminals for corrosion monthly.
If your vehicle's battery is disconnected or goes dead: · The audio system is disabled.
2 Reactivating the audio system P. 253
· The clock resets.
2 Clock P. 172
Canadian models
· The immobilizer system needs to be reset.
2 Immobilizer System Indicator P. 105

112-Volt Battery
3 WARNING
The battery gives off explosive hydrogen gas during normal operation.
A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you.
When conducting any battery maintenance, wear protective clothing and a face shield, or have a skilled technician do it.
WARNING: Battery post, terminals, and related accessories contain lead and lead compounds. Wash your hands after handling.

Maintenance

https://manual-hub.com/

573

uu12-Volt BatteryuCharging the 12-Volt Battery

Charging the 12-Volt Battery
Disconnect both battery cables to prevent damaging your vehicle's electrical system. Always disconnect the negative () cable first, and reconnect it last.

112-Volt Battery
When you find corrosion, clean the battery terminals by applying a baking powder and water solution. Clean the terminals with a damp towel. Cloth/towel dry the battery. Coat the terminals with grease to help prevent future corrosion.

When replacing the battery, the replacement must be of the same specifications. Consult a dealer for more information.

The indicators for the Adaptive Cruise Control (ACC) with Low Speed Follow, safety support, Vehicle Stability AssistTM (VSA®) system, Vehicle Stability AssistTM (VSA®) OFF, and Low Tire Pressure/TPMS may come on after reconnecting the 12-volt battery. Drive a short distance at more than 12 mph (20 km/h). The indicators should go off. If they do not, have your vehicle checked by a dealer.

Maintenance

574

https://manual-hub.com/

Remote Transmitter Care

Replacing the Remote Battery
If the indicator does not come on when the button is pressed, replace the battery. Battery type: CR2032
1. Remove the built-in key.

Battery

2. Remove the upper half of the cover by carefully prying on the edge with a coin. u Wrap a coin with a cloth to prevent scratching the keyless remote. u Remove carefully to avoid losing the buttons.
3. Make sure to replace the battery with the correct polarity.

1Replacing the Remote Battery
3 WARNING
CHEMICAL BURN HAZARD The battery that powers the remote transmitter can cause severe internal burns and can even lead to death if swallowed. Keep new and used batteries away from children.
If you suspect that a child has swallowed the battery, seek medical attention immediately.
NOTICE An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.
Replacement batteries are commercially available or at a dealer.

Maintenance

https://manual-hub.com/

575

Climate Control System Maintenance

Air Conditioning
To ensure proper and safe operation, the Society of Automotive Engineers (SAE J2845) recommends that the refrigerant system only be serviced by trained and certified technicians.
Never repair or replace the air conditioning evaporator (cooling coil) with one removed from a used or salvaged vehicle.
New replacement mobile air conditioning evaporators must be certified (and labeled) as meeting SAE Standard J2842.

1Air Conditioning
NOTICE Vented refrigerant is harmful to the environment. To avoid refrigerant from venting, never replace the evaporator with one removed from a used or salvaged vehicle.
Refrigerant in your vehicle's air conditioning system is flammable and can be ignited during servicing if proper procedures are not followed.

The air conditioner label is found under the hood: 2 Safety Labels P. 85 2 Specifications P. 626

Maintenance

Dust and Pollen Filter
The climate control system is equipped with a dust and pollen filter that collects pollen, dust, and other debris in the air. The Maintenance MinderTM messages will let you know when to replace the filter.
We recommend that you replace the dust and pollen filter sooner when using your vehicle in areas with high concentrations of dust. 576
https://manual-hub.com/

Canadian models

: Caution
: Flammable Refrigerant
: Requires Registered Technician to Service
: Air Conditioning System

1Dust and Pollen Filter
If the airflow from the climate control system deteriorates noticeably, and the windows fog up easily, the filter may need to be replaced. Please contact a dealer for replacement.

Cleaning

Interior Care

Use a damp cloth with a mixture of mild detergent and warm water to remove dirt. Use a clean cloth to remove detergent residue.
Cleaning Seat Belts
Use a soft brush with a mixture of mild soap and warm water to clean the seat belts. Let the belts air dry. Wipe the openings of the seat belt anchors using a clean cloth.
Opening

1Interior Care Do not spill liquids inside the vehicle. Electrical devices and systems may malfunction if liquids are splashed on them.
Do not use silicone based sprays on electrical devices such as audio devices and switches. Doing so may cause the items to malfunction or cause a fire inside the vehicle. If a silicone based spray is inadvertently used on electrical devices, consult a dealer.

Depending on their composition, chemicals and liquid aromatics may cause discoloration, wrinkles, and cracking to resin-based parts and textiles. Do not use alkali solvents or organic solvents such as benzene or gasoline.

After using chemicals, make sure to gently wipe them away using a dry cloth. Do not place used cloths on top of resin based parts or textiles for long periods of time without washing.

Cleaning the Window
Wipe using a glass cleaner.

1Cleaning the Window Wires are mounted to the inside of the rear window. Wipe along the same direction as the wires with a soft cloth so as not to damage them.
Be careful not to spill fluids, such as water or glass cleaner, on or around the cover of both the front sensor camera and the rainfall/light sensor*.

Maintenance

* Not available on all models

Continued
https://manual-hub.com/

577

uuCleaninguInterior Care

Floor Mats

Unlock Lock

The driver's floor mat hooks over the floor anchors, which keep the mat from sliding forward. To remove a mat for cleaning, turn the anchor knobs to the unlock position. When reinstalling the mat after cleaning, turn the knobs to the lock position.

1Floor Mats
If you use any floor mats that were not originally provided with your vehicle, make sure they are designed for your specific vehicle, fit correctly, and are securely anchored by the floor anchors. Position the rear seat floor mats properly. If not properly positioned, the floor mats can interfere with the front seat functions.

Do not put additional floor mats on top of the anchored mat.

Maintaining Genuine Leather*
To properly clean leather: 1. Use a vacuum or soft dry cloth first to remove any dirt or dust. 2. Clean the leather with a soft cloth dampened with a solution comprised of 90%
water and 10% neutral soap. 3. Wipe away any soap residue with a clean damp cloth. 4. Wipe away residual water and allow leather to air dry in the shade.

1Maintaining Genuine Leather*
It is important to clean or wipe away dirt or dust as soon as possible. Spills can soak into leather resulting in stains. Dirt or dust can cause abrasions in the leather. In addition, please note that some dark colored clothing can rub onto the leather seats resulting in discoloration or stains.

Maintenance

578 * Not available on all models

https://manual-hub.com/

uuCleaninguExterior Care

Exterior Care
Dust off the vehicle body after you drive. Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a painted surface can result in body rust. If you find a scratch, promptly repair it.

1Washing the Vehicle
Do not spray water into the air intake vents. It can cause a malfunction.

Washing the Vehicle
Wash the vehicle regularly. Wash more frequently when driving in the following conditions: · If driving on roads with road salt. · If driving in coastal areas. · If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces.

Air Intake Vents

Do not spray water onto the fuel fill door directly. A high-pressure spray may cause it to open.

Maintenance

Using an Automated Car Wash
· Make sure to follow the instructions indicated on the automated car wash. · Fold in the door mirrors. · For models equipped with automatic intermittent wipers, turn the wipers off.
Using High Pressure Cleaners
· Keep sufficient distance between the cleaning nozzle and the vehicle body. · Take particular care around the windows. Standing too close may cause water to
enter the vehicle interior. · Do not spray high pressure water directly into the engine compartment. Instead,
use low pressure water and a mild detergent.

Do not spray water onto the capless unit when the fuel fill door is open. It can cause damage to the fuel system or engine.
If you need to lift the wiper arms away from the windshield, first set the wiper arms to the maintenance position.
2 Changing the Wiper Blade Rubber P. 561
1Using an Automated Car Wash When using an automated car wash that pulls the vehicle through with a conveyor, make sure the transmission in (N position. 2 If you want to keep the transmission in (N position [car wash mode] P. 427

Continued

579

https://manual-hub.com/

uuCleaninguExterior Care

Applying Wax
A good coat of automotive body wax helps protect your vehicle's paint from the elements. Wax will wear off over time and expose your vehicle's paint to the elements, so reapply as necessary.

1Applying Wax
NOTICE Chemical solvents and strong cleaners can damage the paint, metal, and plastic on your vehicle. Wipe away spills immediately.

Maintaining the Bumpers and Other Resin Coated Parts
If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they may be stained or the coating may peel. Promptly wipe it away using a soft cloth and clean water.

1Maintaining the Bumpers and Other Resin Coated Parts
Ask a dealer about the correct coating material when you want to repair the painted surface of the parts made of resin.

Cleaning the Window
Wipe using a glass cleaner.

Maintaining Aluminum Wheels
Aluminum is susceptible to deterioration caused by salt and other road contaminants. When necessary, as early as possible use a sponge and mild detergent to wipe away these contaminants. Do not use a stiff brush or harsh chemicals (including some commercial wheel cleaners). These can damage the protective finish on aluminum alloy wheels, resulting in corrosion. Depending on the type of finish, the wheels also may lose their luster or appear burnished. To avoid water stains, wipe the wheels dry with a cloth while they are still wet.

Maintenance

580

https://manual-hub.com/

Fogged Exterior Light Lenses
The inside lenses of exterior lights (headlights, brake lights, etc.) may fog temporarily if you have driven in the rain, or after the vehicle has been run through a car wash. Dew condensation also may build up inside the lenses when there is a significant enough difference between the ambient and inside lens temperatures (similar to vehicle windows fogging up in rainy conditions). These conditions are natural processes, not structural design problems in the exterior lights.
Lens design characteristics may result in moisture developing on the light lens frame surfaces. This also is not a malfunction.
However, if you see large amounts of water accumulation, or large water drops building up inside the lenses, have your vehicle inspected by a dealer.

uuCleaninguExterior Care

Maintenance

https://manual-hub.com/

581

Accessories and Modifications

Accessories
When installing accessories, check the following: · Do not install accessories on the windshield. They can obstruct your view and
delay your reaction to driving conditions. · Do not install any accessories over areas marked SRS AIRBAG, on the sides or
backs of the front seats, on front or side pillars, or near the side windows. Accessories installed in these areas may interfere with proper operation of the vehicle's airbags or may be propelled into you or another occupant if the airbags deploy. · Be sure electronic accessories do not overload electrical circuits or interfere with proper operation of your vehicle.
2 Fuses P. 616
· Before installing any electronic accessory, have the installer contact a dealer for assistance. If possible, have a dealer inspect the final installation.

1Accessories and Modifications
3 WARNING
Improper accessories or modifications can affect your vehicle's handling, stability, and performance, and cause a crash in which you can be seriously hurt or killed.
Follow all instructions in this owner's manual regarding accessories and modifications.
3 WARNING
Use of improperly designed, engineered or manufactured high-voltage battery assemblies could cause a fire in your vehicle.

A vehicle fire could result in a crash or injury.

Only use a genuine Honda high-voltage battery assembly, or its equivalent, in your vehicle.

Honda Genuine accessories are recommended to ensure proper operation on your vehicle.

Maintenance

582

https://manual-hub.com/

Modifications
Do not modify your vehicle in a manner that may affect its handling, stability, or reliability, or install non-genuine Honda parts or accessories that may have a similar effect.
Even minor modifications to vehicle systems can affect overall vehicle performance. Always make sure all equipment is properly installed and maintained, and do not make any modification to your vehicle or its systems that might cause your vehicle to no longer meet federal, state, province, territory, and local regulations.
The on-board diagnostic port (OBD-II/SAE J1962 connector) installed on this vehicle is intended to be used with automobile system diagnostic devices or with other devices that Honda has approved. Use of any other type of device may adversely affect the vehicle's electronic systems or allow them to be compromised, possibly resulting in a system malfunction, drained battery, or other unexpected problems.
Do not modify or attempt to repair your vehicle's high-voltage hybrid power system or otherwise modify vehicle electrical systems. Disassembling or modifying electrical equipment can result in a crash or a fire.
If you ever need to replace your vehicle's high-voltage battery assembly outside of warranty coverage, we highly recommend that you only use a genuine Honda highvoltage battery assembly. Genuine Honda high-voltage battery assemblies are designed to work with your vehicle's hybrid power system and have been designed, engineered and manufactured to avoid overcharging situations. Non-genuine highvoltage battery assemblies may not have been similarly designed, engineered and manufactured, and installation of such assemblies could result in overcharging, fires, loss of power, or other conditions that may increase the likelihood of a crash or injury.
https://manual-hub.com/

uuAccessories and ModificationsuModifications
583

Maintenance

This page intentionally left blank.

584

https://manual-hub.com/

Handling the Unexpected
This chapter explains how to handle unexpected troubles.

Tools Types of Tools .................................. 586
If a Tire Goes Flat Temporarily Repairing a Flat Tire....... 587
Handling of the Jack......................... 600 Power System Won't Start
Checking the Procedure ................... 601 If the Keyless Remote Battery is Weak ......... 602 Emergency Power System Off........... 603 If the 12-Volt Battery Is Dead .......... 604 Overheating How to Handle Overheating............. 606

Indicator, Coming On/Blinking If the Low Oil Pressure Warning Appears...609 If the 12-Volt Battery Charging System Indicator Comes On ....................... 610 If the Malfunction Indicator Lamp Comes On or Blinks ................................... 610 If the Brake System Indicator (Red) Comes On or Blinks ................................... 611 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On ................................................. 612 If the Electric Power Steering (EPS) System Indicator Comes On ....................... 613
https://manual-hub.com/

If the Low Tire Pressure/TPMS Indicator Comes On or Blinks ....................... 614
If the Transmission System Indicator Blinks along with the Warning Message... 615
Fuses Fuse Locations ................................. 616 Inspecting and Changing Fuses........ 619
Emergency Towing........................... 620 If You Cannot Unlock the Fuel Fill Door.. 621 If You Cannot Open the Trunk ........ 622 Refueling
Refueling From a Portable Fuel Container ....623

585

Tools
Types of Tools

Funnel

1Types of Tools The tools are stored in the trunk.

Handling the Unexpected

586

https://manual-hub.com/

If a Tire Goes Flat

Temporarily Repairing a Flat Tire

If the tire has a large cut or is otherwise severely damaged, you will need to have the vehicle towed. If the tire only has a small puncture, from a nail for instance, you can use the temporary tire repair kit so that you can drive to the nearest service station for a more permanent repair.
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually to reduce speed. Then, stop in a safe place.
1. Park the vehicle on a firm, level, non-slippery surface and apply the parking brake. 2. Put the transmission into (P. 3. Turn on the hazard warning lights and set the power mode to VEHICLE OFF.

1Temporarily Repairing a Flat Tire
The kit should not be used in the following situations. Instead, contact a dealer or roadside assistance to have the vehicle towed.
· The tire sealant has expired. · More than one tire is punctured. · The puncture or cut is larger than 3/16 inch (4.8
mm).
· The tire side wall is damaged or the puncture is
outside the contact area.

When the puncture is:

Kit Use

Smaller than 3/16 inch Yes
(4.8 mm)

Contact

Area

Larger than 3/16 inch No
(4.8 mm)

· Damage has been caused by driving with the tire
extremely under inflated.
· The tire bead is no longer seated. · The rim is damaged.
Do not remove a nail or screw that punctured the tire. If you remove it from the tire, you may not be able to repair the puncture using the kit.

Handling the Unexpected

Continued
https://manual-hub.com/

587

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Getting Ready to Temporarily Repair the Flat Tire

Sealant/Air Hose

Power Plug

AIR Side Selector Knob REPAIR Side Pressure Gauge Pressure Relief Button
Repair Notification Label

Instruction Manual Tire Sealant Expiration Date Inflator Switch
Speed Restriction Label

1Getting Ready to Temporarily Repair the Flat Tire Repair notification label and speed restriction label are applied to the side of the temporary tire repair kit.
When making a temporary repair, carefully read the instruction manual provided with the kit.

U.S.

Canada

U.S. Canada

Handling the Unexpected

588

https://manual-hub.com/

1. Open the trunk floor lid.

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Floor Lid

2. Take the kit out of the case. 3. Place the kit face up, on flat ground near
the flat tire, and away from traffic. Do not place the kit on its side.

Tire Repair Kit

Handling the Unexpected

Continued
https://manual-hub.com/

589

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Injecting Sealant and Air

Valve Cap

1. Remove the valve cap from the tire valve stem.

Sealant/ Air Hose

Tire Valve Stem

2. Remove the sealant/air hose from the packaging.

1Injecting Sealant and Air
3 CAUTION
Tire sealant contains substances that are harmful if inhaled, ingested or if contact is made with the eyes or skin.
Always use in a well-ventilated area and use gloves and safety glasses for protection; do not ingest.
For skin or eye contact, flush with cool water; if ingested, rinse mouth with water. In all cases, seek medical attention if necessary.

Sealant/Air Hose

3. Attach the sealant/air hose onto the tire valve stem. Screw it until it is tight.

In cold temperatures, the sealant may not flow easily. In this situation, warm it up for five minutes before using.
The sealant can permanently stain clothing and other materials. Be careful during handling and wipe away any spills immediately.

Handling the Unexpected

Tire Valve Stem
590

https://manual-hub.com/

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Center Pocket Console Compartment
REPAIR Side

4. Plug in the compressor to the accessory power socket. u Be careful not to pinch the cord in a door or window. u Do not plug any other electric devices into other accessory power sockets.
2 Accessory Power Sockets P. 235
5. Turn the power system on.
2 Turning on the Power P. 416
u Keep the power system on while injecting sealant and air.
2 Carbon Monoxide Gas P. 84

1Injecting Sealant and Air
3 WARNING
Running the engine with the vehicle in an enclosed or even partly enclosed area can cause a rapid buildup of toxic carbon monoxide.
Breathing this colorless, odorless gas can cause unconsciousness and even death. Only run the engine to power the air compressor with the vehicle outdoors.

Handling the Unexpected

6. Turn the selector knob to REPAIR.

NOTICE Do not operate the temporary tire repair kit compressor for more than 15 minutes. The compressor can overheat and become permanently damaged.
There are two accessory power sockets:
· In the console compartment · In the center pocket
Until the sealant injection is complete, the pressure shown on the pressure gauge will appear higher than actual. After the sealant injection is complete the pressure will drop and then begin to rise again as the tire is inflated with air. This is normal. To accurately measure the air pressure using the gauge, turn the air compressor off only after the sealant injection is complete.

Continued
https://manual-hub.com/

591

Handling the Unexpected

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Pressure Gauge
ON
OFF
Sealant/Air Hose
Tire Valve Stem Pressure Relief Button Repair Notification Label
U.S.
Canada

7. Press the inflator switch to turn on the kit. u The compressor starts injecting sealant and air into the tire. u When the sealant injection is complete, continue to add air.
8. After the air pressure reaches to specified pressure, turn off the kit. u To check the pressure, occasionally turn off the compressor and read the gauge. u Refer to the driver's doorjamb label for the specified pressure.
9. Unplug the power plug from the accessory power socket.
10. Unscrew the sealant/air hose from the tire valve stem. Reinstall the valve cap.
11. Press the pressure relief button until the gauge returns to 0 psi (0 kPa).

1Injecting Sealant and Air If the required air pressure is not reached within 10 minutes, the tire may be too severely damaged for the kit to provide the necessary seal, and your vehicle will need to be towed.
See a dealer for a replacement sealant bottle and proper disposal of an empty bottle.

12. Apply the repair notification label to the flat surface of the wheel. u The wheel surface must be clean to ensure the label adheres properly.

592

https://manual-hub.com/

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Distributing the Sealant in the Tire

U.S. Canada

1. Apply the speed restriction label to the location as shown.
2. Drive the vehicle for about 10 minutes. u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.

Speed Restriction Label Sealant/Air Hose

4. Recheck the air pressure using the sealant/ air hose on the compressor.

Handling the Unexpected

Continued
https://manual-hub.com/

593

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Center Pocket Console Compartment

5. Turn the selector knob to AIR. u Do not turn the air compressor on to check the pressure.
2 Inflating an Under-inflated Tire
P. 597

1Distributing the Sealant in the Tire
3 WARNING
Running the engine with the vehicle in an enclosed or even partly enclosed area can cause a rapid buildup of toxic carbon monoxide.
Breathing this colorless, odorless gas can cause unconsciousness and even death. Only run the engine to power the air compressor with the vehicle outdoors.

AIR Side

Handling the Unexpected

594

https://manual-hub.com/

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
6. If the air pressure is · Less than 25 psi (175 kPa): Do not add air or continue driving. The leak is too severe. Call for help and have your vehicle towed.
2 Emergency Towing P. 620 Models with 225/50R17 tires
· Front: 33 psi (230 kPa)/rear: 33 psi (225 kPa) or more:
Models with 235/40R19 tires
· 33 psi (225 kPa) or more: Continue driving for another 10 minutes or until you reach the nearest service station, whichever is sooner. Do not exceed 50 mph (80 km/h). If you have not reached a service station, stop and check the tire pressure. u If the air pressure does not go down after the 10 minute drive, you do not
need to check the pressure any more. Drive to the nearest service station to fix or replace the tire.

Handling the Unexpected

Continued
https://manual-hub.com/

595

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Handling the Unexpected

Models with 225/50R17 tires
· Greater than 25 psi (175 kPa), but less than front: 33 psi (230 kPa)/rear: 33 psi (225 kPa):
Turn the air compressor on to inflate the tire until the tire pressure reaches front: 33 psi (230 kPa)/rear: 33 psi (225 kPa).
2 Inflating an Under-inflated Tire P. 597
Models with 235/40R19 tires
· Greater than 25 psi (175 kPa), but less than 33 psi (225 kPa): Turn the air compressor on to inflate the tire until the tire pressure reaches 33 psi (225 kPa).
2 Inflating an Under-inflated Tire P. 597
All models
Then, drive carefully for 10 more minutes or until you reach the nearest service station, whichever is sooner. Do not exceed 50 mph (80 km/h). If you have not reached a service station, stop and check the tire pressure. u You should repeat this procedure as long as the air pressure is within this
range. 7. Unplug the kit from the accessory power socket. 8. Unscrew the sealant/air hose from the tire valve stem. Reinstall the valve cap. 9. Press the pressure relief button until the gauge returns to 0 psi (0 kPa).
10. Repackage and properly stow the kit.
Pressure Relief Button

596

https://manual-hub.com/

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Inflating an Under-inflated Tire

You can use the kit to inflate a non-punctured under-inflated tire.

Sealant/ Air Hose

1. Open the trunk floor lid.
2 Getting Ready to Temporarily Repair

the Flat Tire P. 588

2. Remove the kit from the case.

3. Place the kit, face up, on flat ground near

the tire to be inflated, away from traffic.

Do not place the kit on its side.

4. Remove the sealant/air hose from the kit.

1Inflating an Under-inflated Tire
NOTICE Do not operate the temporary tire repair kit compressor for more than 15 minutes. The compressor can overheat and become permanently damaged.

5. Remove the valve cap.

Handling the Unexpected

Valve Cap Sealant/Air Hose

6. Attach the sealant/air hose onto the tire valve stem. Screw it until it is tight.

Tire Valve Stem

Continued
https://manual-hub.com/

597

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire

Center Pocket Console Compartment

7. Plug in the kit to the accessory power socket. u Be careful not to pinch the cord in a door or window. u Do not plug any other electronic devices into other accessory power sockets.
2 Accessory Power Sockets P. 235
8. Turn the power system on.
2 Turning on the Power P. 416
u Keep the power system on while injecting air.
2 Carbon Monoxide Gas P. 84

1Inflating an Under-inflated Tire
3 WARNING
Running the engine with the vehicle in an enclosed or even partly enclosed area can cause a rapid buildup of toxic carbon monoxide.
Breathing this colorless, odorless gas can cause unconsciousness and even death. Only run the engine to power the air compressor with the vehicle outdoors.

AIR Side ON

9. Turn the selector knob to AIR. 10. Press the inflator switch to turn on the kit.
u The compressor starts to inject air into the tire.
11. Inflate the tire to the specified air pressure.

Handling the Unexpected

598

https://manual-hub.com/

Pressure Relief Button

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
12. Turn off the kit. u Check the pressure gauge on the air compressor. u If overinflated, press the pressure relief button.
13. Unplug the kit from the accessory power socket.
14. Unscrew the sealant/air hose from the tire valve stem. Reinstall the valve cap.
15. Press the pressure relief button until the gauge returns to 0 psi (0 kPa).
16. Repackage and properly stow the kit.

Handling the Unexpected

https://manual-hub.com/

599

Handling of the Jack
Your vehicle has jacking points as shown. When replacing your tires, consult a dealer.
Jacking Points

Handling the Unexpected

600

https://manual-hub.com/

Handling the Unexpected

Power System Won't Start

Checking the Procedure
When the READY indicator does not come on and the Ready To Drive message does not appear on the driver information interface, check the following items and take appropriate action.

1Checking the Procedure
If you must start the vehicle immediately, use an assisting vehicle or booster battery to jump start it.
2 If the 12-Volt Battery Is Dead P. 604

Checklist Check if the related indicator or driver information interface messages come on.
Check the brightness of the interior lights.

Condition The Temperature Is Too Cold For Vehicle To Operate message appears. The To Start, Hold Remote Near Start Button message appears. uMake sure the keyless remote is in its operating range.
2 POWER Button Operating Range P. 197
The POWER SYSTEM indicator comes on. The transmission system indicator blinks and Transmission System Problem. Apply Parking Brake When Parked. See Your Dealer. message appears. The interior lights are dim or do not come on at all. The interior lights come on normally.

Check the shift position.
Check the immobilizer system indicator.

The transmission is not in (P.
When the immobilizer system indicator is blinking, the power system cannot be turned on.

What to Do
2 Driver Information Interface Warning and Information Messages P. 115
2 If the Keyless Remote Battery is Weak P. 602
Have your vehicle checked by a dealer.
2 If the Transmission System Indicator Blinks along with the Warning Message P. 615
Have the 12-volt battery checked by a dealer. Check all fuses, or have your vehicle checked by a dealer.
2 Inspecting and Changing Fuses P. 619
Put the transmission into (P.
2 Immobilizer System Indicator P. 105

https://manual-hub.com/

601

uuPower System Won't StartuIf the Keyless Remote Battery is Weak
If the Keyless Remote Battery is Weak
If the beeper sounds, the To Start, Hold Remote Near Start Button message appears on the driver information interface, the POWER button flashes, and the READY indicator does not come on, turn on the power system as follows:
1. Touch the center of the POWER button with the H logo on the keyless remote while the POWER button is flashing. The buttons on the keyless remote should be facing you. u The POWER button flashes for about 30 seconds.
2. Depress the brake pedal and press the POWER button within 10 seconds after the beeper sounds and the POWER button changes from flashing to on. u The READY indicator comes on. u If you don't depress the pedal, the mode will change to ACCESSORY.

Handling the Unexpected

602

https://manual-hub.com/

uuPower System Won't StartuEmergency Power System Off

Emergency Power System Off
The POWER button may be used to turn the power system off due to an emergency situation even while driving. If you must turn the power system off, do either of the following operations: · Press and hold the POWER button for about two seconds. · Firmly press the POWER button three times.
The steering wheel will not lock. However, because turning off the power system disables the power assist the power system provides to the steering and braking systems, it will require significantly more physical effort and time to steer and slow the vehicle. Use both feet on the brake pedal to slow down the vehicle and stop immediately in a safe place. The transmission automatically changes to (P after the vehicle comes to a complete stop. Then, the power mode changes to VEHICLE OFF.

1Emergency Power System Off
Do not press the POWER button while driving unless it is absolutely necessary for the power system to be turned off. If you press the POWER button while driving, the beeper sounds.

Handling the Unexpected

https://manual-hub.com/

603

Handling the Unexpected

If the 12-Volt Battery Is Dead

Jump Starting Procedure

Turn off the power to electric devices, such as audio and lights. Turn off the power

system, then open the hood.

1. Open the cover on the positive + terminal.

2. Connect the first jumper cable to your

vehicle's 12-volt battery + terminal.

3. Connect the other end of the first jumper

cable to the booster battery + terminal.

u Use a 12-volt booster battery only.

u When using an automotive battery

charger to boost your 12-volt battery,

Booster Battery

select a lower charging voltage than 15volt. Check the charger manual for the

proper setting.

4. Connect the second jumper cable to the

booster battery - terminal.

1Jump Starting Procedure
3 WARNING
A 12-volt battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby.
Keep all sparks, open flames, and smoking materials away from the 12-volt battery.
Securely attach the jumper cables clips so that they do not come off when the engine vibrates. Be careful not to tangle the jumper cables or allow the cable ends to touch each other while attaching or detaching the jumper cables.
12-volt battery performance degrades in cold conditions and may prevent the engine from starting.

5. Connect the other end of the second jumper cable to the upper torque mounting bolt as shown. Do not connect this jumper cable to any other part.
6. If your vehicle is connected to another vehicle, start the assisting vehicle's engine and increase its rpm slightly.
7. Attempt to start your vehicle's engine. If it turns over slowly, check that the jumper cables have good metal-to-metal contact.

604

https://manual-hub.com/

uuIf the 12-Volt Battery Is DeaduJump Starting Procedure

What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following order.
1. Disconnect the jumper cable from your vehicle's ground. 2. Disconnect the other end of the jumper cable from the booster battery -
terminal. 3. Disconnect the jumper cable from your vehicle's 12-volt battery + terminal. 4. Disconnect the other end of the jumper cable from the booster battery +
terminal.

1Jump Starting Procedure
The Vehicle Stability AssistTM (VSA®) system, Vehicle Stability AssistTM (VSA®) OFF, Adaptive Cruise Control (ACC) with Low Speed Follow, safety support, and low tire pressure/TPMS indicators may come on in amber along with a message in the driver information interface when you set the power mode to ON after re-connecting a 12-volt battery. Drive a short distance at more than 12 mph (20 km/h). Each indicator should go off. If any do not, have your vehicle checked by a dealer.

Have your vehicle inspected by a nearby service station or a dealer.

Handling the Unexpected

https://manual-hub.com/

605

Overheating
How to Handle Overheating
Overheating symptoms are as follows: · The Power System Temperature High. Power May Be Reduced. message
appears on the driver information interface. · The Engine Temperature Too Hot. Do Not Drive. Allow Engine To Cool.
message appears on the driver information interface. · Steam or spray comes out of the engine compartment.
The Power System Temperature High. Power May Be Reduced. Message Appears on the Driver Information Interface
The Power System Temperature High. Power May Be Reduced. message appears on the driver information interface when the power system temperature is high.
2 Driver Information Interface Warning and Information Messages P. 115
1. Immediately park the vehicle in a safe place. u Set the parking brake, and put the transmission into (P. Turn off all accessories and turn on the hazard warning lights.
2. Keep the power mode in ON, and wait until the message disappears. u If the message does not disappear, have your vehicle inspected at a dealer.

Handling the Unexpected

606

https://manual-hub.com/

uuOverheatinguHow to Handle Overheating

The Engine Temperature Too Hot. Do Not Drive. Allow Engine To Cool. Message Appears on the Driver Information Interface
First thing to do 1. Immediately park the vehicle in a safe place.
2. Turn off all accessories and turn on the hazard warning lights. u No steam or spray present: Keep the power system on and open the hood. u Steam or spray is present: Turn off the power system and wait until it subsides. Then, open the hood.

1How to Handle Overheating
3 WARNING
Steam and spray from an overheated engine can seriously scald you.
Do not open the hood if steam is coming out.
NOTICE Continuing to drive with the Engine Temperature Too Hot. Do Not Drive. Allow Engine To Cool. message on the driver information interface may damage the engine.

Handling the Unexpected

Continued
https://manual-hub.com/

607

Handling the Unexpected

uuOverheatinguHow to Handle Overheating

Next thing to do
Engine Coolant Reserve Tank
MAX
MIN

1. Check that the cooling fan is operating and turn the power system off once the Engine Temperature Too Hot. Do Not Drive. Allow Engine To Cool. message disappears. u If the cooling fan is not operating, immediately turn the power system off.
2. Once the engine has cooled down, inspect the coolant level and check the cooling system components for leaks. u If the coolant level in the engine coolant reserve tank is low, add coolant until it reaches the MAX mark. u If there is no coolant in the reserve tank, check that the radiator is cool. Cover the radiator cap with a heavy cloth and open the cap. If necessary, add coolant up to the base of the filler neck, and put the cap back on.

1How to Handle Overheating
3 WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
If the coolant is leaking, contact a dealer for repairs.
Use water as an emergency/temporary measure only. Have a dealer flush the system with proper antifreeze as soon as possible.

Last thing to do Once the engine has cooled sufficiently, turn the power system on. If the Engine Temperature Too Hot. Do Not Drive. Allow Engine To Cool. message does not appear, resume driving. If it appears again, contact a dealer for repairs.

608

https://manual-hub.com/

Indicator, Coming On/Blinking

If the Low Oil Pressure Warning Appears
Reasons for the warning to appear Appears when the engine oil pressure is low.
What to do as soon as the warning appears
1. Immediately park the vehicle on level ground in a safe place.
2. If necessary, turn the hazard warning lights on.

1If the Low Oil Pressure Warning Appears
NOTICE Running the engine with low oil pressure can cause serious mechanical damage almost immediately.

What to do after parking the vehicle 1. Turn the power system off and let the
engine sit for approximately three minutes. 2. Open the hood and check the oil level.
u Add oil as necessary.
2 Oil Check P. 543
3. Start the engine and check the low oil pressure warning. u The warning disappears: Start driving again. u The warning does not disappear within 10 seconds: Immediately turn the power system off and contact a dealer for repairs.

Handling the Unexpected

https://manual-hub.com/

609

uuIndicator, Coming On/BlinkinguIf the 12-Volt Battery Charging System Indicator Comes On

If the 12-Volt Battery Charging System Indicator Comes On
Reasons for the indicator to come on Comes on when there is a problem with the charging system. What to do when the indicator comes on Stop in a safe place and have your vehicle checked by a dealer immediately.
If the Malfunction Indicator Lamp Comes On or Blinks
Reasons for the indicator lamp to come on or blink · Comes on if there is a problem with the engine emissions control
system. · Blinks when engine misfiring is detected. What to do when the indicator lamp comes on Avoid high speeds and immediately get your vehicle inspected at a dealer. What to do when the indicator lamp blinks Park the vehicle in a safe place with no flammable items and wait at least 10 minutes or more with the engine stopped until it cools.

1If the 12-Volt Battery Charging System Indicator Comes On If you need to stop temporarily, do not turn off the power system. The power system uses the 12-volt battery to activate. You may not be able to turn the power system on again if you have turned it off with this indicator on.
This indicator may come on when the outside temperature is below -40°F (-40°C). It will go off after the battery warms up.
1If the Malfunction Indicator Lamp Comes On or Blinks
NOTICE If you drive with the malfunction indicator lamp on, the emissions control system and the engine could be damaged.
If the malfunction indicator lamp blinks again when restarting the engine, drive to the nearest dealer at 31 mph (50 km/h) or less. Have your vehicle inspected.

Handling the Unexpected

610

https://manual-hub.com/

uuIndicator, Coming On/BlinkinguIf the Brake System Indicator (Red) Comes On or Blinks

If the Brake System Indicator (Red) Comes On or

Blinks

U.S. Canada

Reasons for the indicator to come on · The brake fluid is low. · There is a malfunction in the brake system. What to do when the indicator comes on while driving Depress the brake pedal lightly to check pedal pressure. · If normal, check the brake fluid level the next time you stop. · If abnormal, take immediate action. If necessary, downshift the
transmission to slow the vehicle using regenerative braking. Reasons for the indicator to blink · There is a problem with the electric parking brake system. What to do when the indicator blinks · Avoid using the parking brake and have your vehicle checked by a
dealer immediately.

1If the Brake System Indicator (Red) Comes On or Blinks
Have your vehicle repaired immediately. It is dangerous to drive with low brake fluid. If there is no resistance from the brake pedal, stop immediately in a safe place. If necessary, downshift the transmission.
If the brake system indicator (red) and ABS indicator come on simultaneously, the electronic brake distribution system is not working. This can result in vehicle instability under sudden braking. Have your vehicle inspected by a dealer immediately.
If the brake system indicator (red) blinks at the same time when the brake system indicator (amber) comes on, the parking brake may not work. Avoid using the parking brake and have your vehicle checked by a dealer immediately.
2 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On P. 612

Handling the Unexpected

https://manual-hub.com/

611

uuIndicator, Coming On/BlinkinguIf the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On

If the Brake System Indicator (Red) Comes On or

Blinks at the Same Time When the Brake System

Indicator (Amber) Comes On

U.S. Canada

If the brake system indicator (red) comes on or blinks at the same time when the brake system indicator (amber) comes on, release the parking brake manually or automatically
2 Parking Brake P. 503

(Red) U.S.

·If the brake system indicator (red) continuously comes on or blinks at the same time when the brake system indicator (amber) comes on, stop the vehicle in a safe place and have it inspected by a dealer immediately. u Preventing the vehicle from moving, put the transmission into (P.

Canada

·If only the brake system indicator (red) is turned off, avoid using the parking brake and have your vehicle checked by a dealer immediately.

(Amber)

1 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On If you apply the parking brake, you may not be able to release it.
If the brake system indicator (red) and the brake system indicator (amber) come on at the same time, the parking brake is working.
If the brake system indicator (red) blinks at the same time when the brake system indicator (amber) comes on, the parking brake may not work because it is checking the system.
If you repeatedly operate the electric parking brake in a short period of time, the brake stops operating to prevent heating of the system and the indicator blinks. It returns to its original state in approximately one minute.

Handling the Unexpected

612

https://manual-hub.com/

uuIndicator, Coming On/BlinkinguIf the Electric Power Steering (EPS) System Indicator Comes On
If the Electric Power Steering (EPS) System Indicator Comes On
Reasons for the indicator to come on · Comes on if there is a problem with the EPS system. What to do when the indicator comes on Stop the vehicle in a safe place and turn on the power system again. If the indicator comes on and stays on, immediately have your vehicle inspected by a dealer.

Handling the Unexpected

https://manual-hub.com/

613

uuIndicator, Coming On/BlinkinguIf the Low Tire Pressure/TPMS Indicator Comes On or Blinks

If the Low Tire Pressure/TPMS Indicator Comes On or Blinks
Reasons for the indicator to come on or blink A tire pressure is significantly low, or the TPMS has not been calibrated. If there is a problem with the TPMS, the indicator blinks for about one minute, and then stays on. What to do when the indicator comes on Drive carefully and avoid abrupt cornering and hard braking. Stop your vehicle in a safe place. Check the tire pressure and adjust the pressure to the specified level. The specified tire pressure is on a label on the driver side doorjamb.
u Calibrate the TPMS after the tire pressure is adjusted. What to do when the indicator blinks, then remains on Have the tire inspected by a dealer as soon as possible.

1If the Low Tire Pressure/TPMS Indicator Comes On or Blinks
NOTICE Driving on an extremely underinflated tire can cause it to overheat. An overheated tire can fail. Always inflate your tires to the prescribed level.

Handling the Unexpected

614

https://manual-hub.com/

uuIndicator, Coming On/BlinkinguIf the Transmission System Indicator Blinks along with the Warning Message

If the Transmission System Indicator Blinks along with the Warning Message
Reasons for the indicator to blink The transmission is malfunctioning. What to do when the indicator blinks ·Immediately have your vehicle inspected by a dealer.

1If the Transmission System Indicator Blinks along with the Warning Message You may not be able to turn on the power system.
Make sure to set the parking brake when parking your vehicle.
Call a professional towing service if you need to tow your vehicle.
2 Emergency Towing P. 620

Handling the Unexpected

https://manual-hub.com/

615

Fuses

Fuse Locations
If any electrical devices are not working, set the power mode to VEHICLE OFF, and check to see if any applicable fuse is blown.
Engine Compartment Fuse Box
Located near the 12-volt battery. Push the tabs to open the box. Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number.
Tab

Circuit protected and fuse rating

Circuit Protected

Amps

Battery

150 A

(70 A)

EPS

70 A

(30 A)

Fuse Box Main 2

Electric Servo Brake

60 A 40 A

ABS/VSA FSR

40 A

SBW 1

30 A

IG Main 1

30 A

Rear Defogger

40 A

Fuse Box Main 1

60 A

(30 A)

Heater Motor

40 A

(40 A)

(30 A)

Fuse Box Option 2*

(70 A)

(40 A)

Fuse Box Option 1

60 A

Handling the Unexpected

616 * Not available on all models

https://manual-hub.com/

Circuit Protected

RFC

SRM2 5
ABS/VSA Motor

IG Main 2

ENG EWP

SRM1

Wiper Motor

Brake Light

EVTC

PCU EWP

RFC Coil

IGP

IG Hold

FI ECU

Battery Sensor

DBW

Ignition Coil

Hazard

P-ACT ECU

22 Heated Steering Wheel*, *1

Audio

*1:Canadian models

Amps 40 A (30 A) 30 A 40 A 30 A 30 A 30 A
- 30 A 10 A 20 A 15 A 10 A 15 A 10 A 10 A 7.5 A 15 A 15 A 15 A
- 7.5 A (10 A)
- 15 A

uuFusesuFuse Locations

Circuit Protected

Rear Seat Heaters*

26 Heated Windshield*1

Back Up

Horn

Front Fog Lights*

A/C EWP

Washer Motor

Audio Sub

IGPS (LAF)

IG1 E-PARKING

IG1 IPU

IG1 TCU

IG1 Fuel Pump

IG1 ABS/VSA

IG1 ACG

IG1 RFC

IG1 Monitor

*1:Canadian models

* Not available on all models

Amps (20 A) (15 A) 10 A 10 A (10 A) (10 A)
- 15 A
- (10 A) (7.5 A) 7.5 A 7.5 A 10 A 10 A 20 A 7.5 A 10 A 7.5 A 7.5 A
-

Interior Fuse Box
Located under the dashboard.
Fuse Label
Fuse locations are shown on the label on the side panel. Locate the fuse in question by the fuse number and label number.

https://manual-hub.com/

Circuit protected and fuse rating

Circuit Protected

Amps

2 Driver's Side Door Unlock

Passenger's Side Door Unlock

ACCESSORY

10 A 10 A 10 A

ACC Key Lock

SRS

7.5 A 10 A

Handling the Unexpected

IG Hold2

(10 A)

SMART

10 A -

11 Driver's Side Door Lock 10 A

Driver's Door Lock

(10 A)

13 Passenger's Side Door Lock 10 A

IG2_Option

15 Daytime Running Lights

10 A 10 A

Accessory Power Socket (Console Compartment)

Moonroof*

(20 A)
(20 A) -

Shift By Wire ECU

- (10 A)

21 Driver's Door Unlock

(10 A) -

Premium Audio*

- (20 A)

617

uuFusesuFuse Locations

Handling the Unexpected

Circuit Protected

IG Hold3

33 Driver's Power Seat Sliding*

Passenger's Power Seat Sliding*

IG1_Option2

Meter

IG1_Option1

Driver's Power Seat Reclining*

Passenger's Power Seat Reclining*

40 Driver's Lumbar Support*

42 Front Air Ventilated Seat*

+B_Option

ADS*

SRS

Head-Up Display*

Amps - - - - - - -
(15 A) (20 A)
(20 A)
10 A 10 A 10 A
(20 A)
(20 A)
(10 A) -
(20 A) 10 A (20 A)
- 10 A
- (10 A)

618 * Not available on all models

Circuit Protected

Door Lock

Front Accessory Power Socket

Rear Passenger's Side Power Window

Rear Driver's Side Power Window

Front Passenger's Power Window

54 Driver's Power Window

Amps 20 A 20 A
20 A
20 A
20 A 20 A
-

https://manual-hub.com/

uuFusesuInspecting and Changing Fuses

Inspecting and Changing Fuses

Screw Blown Fuse
Combined Fuse
Fuse Puller

1. Set the power mode to VEHICLE OFF. Turn headlights and all accessories off.
2. Remove the fuse box cover. 3. Check the large fuse in the engine
compartment. u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and replace it with a new one.
4. Inspect the small fuses in the engine compartment and the vehicle interior. u If there is a blown fuse, remove it with the fuse puller and replace it with a new one.

1Inspecting and Changing Fuses
NOTICE Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Use the charts to locate the fuse in question and confirm the specified amperage on the fuse label.
2 Fuse Locations P. 616 Replace fuse with a spare fuse of the same specified amperage.
There is a fuse puller on the back of the engine compartment fuse box cover.

Handling the Unexpected

https://manual-hub.com/

619

Emergency Towing

Call a professional towing service if you need to tow your vehicle.
Flatbed equipment The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle.

1Emergency Towing
NOTICE Trying to lift or tow your vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle's weight.

Wheel lift equipment The tow truck uses two pivoting arms that go under the front tires and lift them off the ground. The rear tires remain on the ground. This is an acceptable way to tow your vehicle.

NOTICE Improper towing such as towing behind a motorhome or other motor vehicle can damage the transmission.
Make sure the parking brake is released. If you cannot release the parking brake, your vehicle must be transported by the flatbed equipment.
2 Parking Brake P. 503

Never tow your vehicle with just a rope or chain. It is very dangerous since ropes or chains may shift from side to side or break.

Handling the Unexpected

620

https://manual-hub.com/

If You Cannot Unlock the Fuel Fill Door

What to Do If Unable to Unlock the Fuel Fill Door

If you cannot unlock the fuel fill door, use the following procedure.

1. Open the trunk.

2. Pull the release cord beneath the rear tray

as shown.

u The release cord unlocks the fuel fill door

Release Cord

when it is pulled. 3. Open the fuel fill door.

2 How to Refuel P. 526

1What to Do If Unable to Unlock the Fuel Fill Door
After taking these steps, contact a dealer to have the vehicle checked.

Handling the Unexpected

https://manual-hub.com/

621

If You Cannot Open the Trunk

What to Do If Unable to Open the Trunk
If you cannot open the trunk, use the following procedure. 1. Remove the built-in key from the smart entry remote. 2. Remove the cover with the key. u Wrap a key with a cloth to prevent scratching the cover.

1What to Do If Unable to Open the Trunk
Following up: After taking these steps, contact a dealer to have the vehicle checked.

Trunk Release Cover

3. Insert the key into the cylinder and turn it clockwise.
4. Replace the cover.

Handling the Unexpected

622

https://manual-hub.com/

Refueling

Refueling From a Portable Fuel Container

If you have run out of fuel and need to refuel your vehicle from a portable fuel

container, use the funnel provided with your vehicle.

Funnel

1. Turn off the power system. 2. Press on the edge of the fuel fill door to

make it pop up slightly. u The fuel fill door opens.

3. Take the funnel out of the tool case in the

trunk.
2 Types of Tools P. 586

4. Place the end of the funnel on the lower

part of filler opening, then insert it slowly

and fully. u Make sure that the end of the funnel

goes down along with the filler pipe.

5. Fill the tank with fuel from the portable fuel

container. u Pour fuel carefully so you do not spill any.

6. Remove the funnel from the filler neck. u Wipe up any fuel from the funnel before

storing it.

7. Shut the fuel fill door by hand.

1Refueling From a Portable Fuel Container
3 WARNING
Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.
· Turn the power system off, and keep heat, sparks, and flames away.
· Handle fuel only outdoors. · Wipe up spills immediately.
NOTICE Do not insert the nozzle of a portable fuel container or any funnel other than the one provided with your vehicle. Doing so can damage the fuel system. Do not try to pry open or push open the sealed fuel tank with foreign objects. This can damage the fuel system and its seal.
Make sure the fuel in the portable fuel container is gasoline before you refuel.

Handling the Unexpected

https://manual-hub.com/

623

This page intentionally left blank.

624

https://manual-hub.com/

Information
This chapter includes your vehicle's specifications, locations of identification numbers, and other information required by regulation.

Specifications .................................... 626 Identification Numbers
Vehicle Identification Number (VIN), Engine Number, Motor Number, and Transmission Number..................... 628
Devices that Emit Radio Waves ....... 629 Reporting Safety Defects ................. 630

Emissions Testing Testing of Readiness Codes.............. 631
Warranty Coverages ........................ 633 Authorized Manuals......................... 636 Customer Service Information......... 637

https://manual-hub.com/

625

Specifications

Vehicle Specifications

Model

Accord Hybrid

No. of Passengers:

Front

Rear

Total

Weights:

Gross Vehicle Weight Rating

See the certification label on the driver's doorjamb

Gross Axle Weight Rating (Front)

See the certification label on the driver's doorjamb

Gross Axle Weight Rating (Rear)

See the certification label on the driver's doorjamb

Engine Specifications

Displacement

121.6 cu-in (1,993 cm3)

Spark Plugs

NGK

DILZKAR7D11S

Fuel
Fuel: Type Fuel Tank Capacity

Unleaded gasoline, Pump octane number of 87 or higher 12.81 US gal (48.5 L)

Washer Fluid
Tank Capacity

U.S.: 2.6 US qt (2.5 L) Canada: 4.5 L

Air Conditioning

Refrigerant Type Charge Quantity

HFO-1234yf (R-1234yf) 13.9 15.7 oz (395 445 g)

Lubricant Type Quantity

ND-OIL 11 7.3 8.2 cu-in (120 135 cm3)

Light Bulbs
Headlights (Low Beam)
Headlights (High Beam)
Fog Lights* Parking/Daytime Running Lights Front Turn Signal Lights Front Side Marker Lights Side Turn Signal Lights* (on Door Mirrors) Brake Lights Taillights Brake/Taillights* Rear Side Marker Lights Rear Turn Signal Lights Back-Up Lights High-Mount Brake Light Rear License Plate Light Interior Lights
Map Lights Ceiling Light Vanity Mirror Lights Center Pocket Light Door Inner Handle Lights* Door Courtesy Lights* Trunk Light *1: H-LX model *2: Except H-LX model

LED 60W (HB3)*1 LED*2 LED LED LED LED
LED
LED LED LED LED 21W (Amber) 16W LED LED
8W 8W 1.4W LED LED 2CP (3.8W) 5W

Information

626 * Not available on all models

https://manual-hub.com/

uu Specifications u

Brake Fluid

Specified

Honda Heavy Duty Brake Fluid DOT 3

Transmission Fluid

Specified

Honda ATF DW-1 (automatic transmission fluid)

Capacity

Change

2.3 US qt (2.2 L)

Engine Oil
Recommended
Capacity

·Genuine Honda Motor Oil 0W-20 ·API Premium-grade 0W-20 detergent oil Change 3.7 US qt (3.5 L) Change including 4.0 US qt (3.8 L) filter

Engine Coolant

Specified Ratio

Honda Long-Life Antifreeze/Coolant Type2 50/50 with distilled water

Capacity

1.29 US gal (4.88 L) (change including the remaining 0.17 US gal (0.66 L) in the reserve tank)

Tire

Regular

Size*1
Pressure psi (kPa [kgf/cm2])

Wheel Size Regular

225/50R17 94V

235/40R19 96V

Front

33 (230 [2.3])*2 33 (225 [2.3])*3

Rear 33 (225 [2.3])

17 x 7 1/2J*2

19 x 8 1/2J*3

*1: Original tire size is mentioned on the tire information label on the driver's doorjamb.
*2: Models with 225/50R17 *3: Models with 235/40R19

Information

https://manual-hub.com/

627

Identification Numbers

Vehicle Identification Number (VIN), Engine Number, Motor Number, and Transmission Number
Your vehicle has a 17-digit vehicle identification number (VIN) used to register your vehicle for warranty purposes, and for licensing and insuring your vehicle. The locations of your vehicle's VIN, engine number, motor number, and transmission number are shown as follows.

1Vehicle Identification Number (VIN), Engine Number, Motor Number, and Transmission Number
The interior vehicle identification number (VIN) is located under the cover.

Vehicle Identification Number

Engine Number Motor Number
Transmission Number Vehicle Identification Number

Certification Label/ Vehicle Identification Number

Cover

Information

628

https://manual-hub.com/

Devices that Emit Radio Waves
Each radio frequency device installed in the vehicle conforms to the requirements and standards of the regulation listed below:
As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Information

https://manual-hub.com/

629

Reporting Safety Defects
In the U.S. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or American Honda Motor Co., Inc.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-4249153); go to http://www.safercar.gov; or write to: Administrator, NHTSA, 1200 New Jersey Avenue, SE., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http:// www.safercar.gov.
In Canada If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Honda Canada Inc. and you may also inform Transport Canada.
If Transport Canada receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may lead to a recall and remedy campaign. However, Transport Canada cannot become involved in individual problems between you, your dealer, or Honda Canada Inc.
To contact Transport Canada's Defect Investigations and Recalls Division, you may call 1-800-333-0510. For more information on reporting safety defects or about motor vehicle safety, go to http://www.tc.gc.ca/ roadsafety.

Information

630

https://manual-hub.com/

Emissions Testing

Testing of Readiness Codes
Your vehicle has readiness code as part of the onboard self diagnostic system. Some States use these codes for testing to verify whether your vehicle's emissions components are working properly. The codes may not be read properly if testing is performed just after the 12-volt battery has gone dead or been disconnected.
To check if they are set, set the power mode to ON, without turning the power system on. The malfunction indicator lamp will come on for several seconds. If it then goes off, the readiness codes are set. If it blinks five times, the readiness codes are not set.

1Testing of Readiness Codes The readiness codes are erased when the 12-volt battery is disconnected, and set again only after several days of driving under a variety of conditions.
If a testing facility determines that the readiness codes are not set, you may be requested to return at a later date to complete the test.
If the testing facility determines the readiness codes are still not set, see a dealer.

If you are required to have your vehicle tested before the readiness codes are ready, prepare the vehicle for retesting by doing the following:

1. Fill the gas tank to approximately 3/4 full. 2. Park the vehicle and leave the power system off for six hours or more. 3. Make sure the ambient temperature is between 40°F and 95°F (4°C and 35°C). 4. Turn the power system on.

Information

Continued
https://manual-hub.com/

631

uuEmissions TestinguTesting of Readiness Codes
5. Select a nearby, lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in (D. Do not use cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.) If you cannot do this for a continuous 90 seconds because of traffic conditions, drive for at least 30 seconds, then repeat it two more times (for a total of 90 seconds).
6. Drive in city or suburban traffic for at least 10 minutes. When traffic conditions allow, let the vehicle coast for several seconds without using the accelerator pedal or the brake pedal.
7. Park the vehicle and leave the power system off for 40 minutes.

Information

632

https://manual-hub.com/

Warranty Coverages
U.S. Owners Your new vehicle is covered by these warranties:
New Vehicle Limited Warranty covers your new vehicle, except for the emissions control systems and accessories, against defects in materials and workmanship.
Emissions Control Systems Defects Warranty and Emissions Performance Warranty these two warranties cover your vehicle's emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information.
Seat Belt Limited Warranty a seat belt that fails to function properly is covered by a limited warranty. Please read your warranty booklet for details.
Rust Perforation Limited Warranty all exterior body panels are covered against rusting from the inside out for the specified time period, regardless of mileage.
Accessory Limited Warranty Honda accessories are covered under this warranty. Time and mileage limits depend on the type of accessory and other factors. Please read your warranty booklet for details.
Replacement Parts Limited Warranty covers all Honda replacement parts against defects in materials and workmanship.

Information

Continued
https://manual-hub.com/

633

uuWarranty Coveragesu

Replacement 12-Volt Battery Limited Warranty provides prorated coverage for a replacement battery purchased from your dealer.

Replacement Muffler Lifetime Limited Warranty provides coverage for as long as the purchaser of the muffler owns the vehicle.

Restrictions and exclusions apply to all these warranties. Please read the Honda warranty information booklet that came with your vehicle for precise information on warranty coverages. Your vehicle's original tires are covered by their manufacturer. Tire warranty information is in a separate booklet.
Statement on Warranty Coverage for Aftermarket and Recycled Parts The Magnuson-Moss Warranty Act, 15 U.S.C. s.2301 et seq., makes it illegal for motor vehicle manufacturers to void a motor vehicle warranty or deny warranty coverage solely because an aftermarket or recycled part has been used to repair the vehicle or someone other than the authorized service provider performed service on the vehicle. This provision does not apply to a new motor vehicle purchased solely for commercial or industrial use.

Information

Under federal law, a manufacturer may deny warranty coverage and charge for repairs to a vehicle if it is discovered that an aftermarket or recycled part installed on the vehicle is defective or was installed incorrectly and caused damage to another part of the vehicle otherwise covered under warranty. The Federal Trade Commission requires that a manufacturer demonstrate that an aftermarket or recycled part or service performed by a person other than an authorized service provider caused damage to another part of the vehicle otherwise covered under warranty before denying warranty coverage. Additionally, federal law allows a manufacturer to void a motor vehicle warranty or deny warranty coverage if the manufacturer provides the article or service to consumers free of charge under the warranty or the manufacturer has secured a waiver from the Federal Trade Commission.

634

https://manual-hub.com/

Canadian Owners Please refer to the warranty manual that came with your vehicle.
EPA Contact Information An owner may obtain further information concerning emission warranties or report violations of the terms of the emission warranties by contacting:
Director, Light-Duty Vehicle Center, U.S. Environmental Protection Agency, Attention: Warranty Claim 2000 Traverwood Drive, Ann Arbor, MI 48105; complianceinfo@epa.gov

uuWarranty Coveragesu

Information

https://manual-hub.com/

635

Authorized Manuals
Service Express For electronic copies of service publications, you can purchase a subscription to Service Express. Visit www.techinfo.honda.com for pricing and options.
For U.S. Owners Manuals can be purchased from Helm Incorporated. You can order a manual by phone at 1 (800) 782-4356 (credit card orders only), or online at www.helminc.com.
For Canadian Owners Please contact a dealer to order any manuals that you may require.

Information

636

https://manual-hub.com/

Customer Service Information

Honda dealership personnel are trained professionals who should be able to deal with any problems you may encounter with your vehicle. If, however, you are faced with a problem that they cannot resolve to your satisfaction, contact Honda Customer Services.

U.S. Owners American Honda Motor Co., Inc. Honda Automobile Customer Service Mail Stop CHI-5 1919 Torrance Blvd. Torrance, CA 90501-2746 Tel: 1 (800) 999-1009

Canadian Owners Honda Canada Inc. Customer Relations 180 Honda Boulevard Markham, ON L6C 0H9 Tel: 1-888-9-HONDA-9 Fax: 1-877-939-0909 E-mail: Honda_cr@ch.honda.com

1Customer Service Information
When you call or write, please give us the following information:
· Vehicle Identification Number
2 Vehicle Identification Number (VIN), Engine Number, Motor Number, and Transmission Number P. 628
· Date of purchase · Odometer reading of your vehicle · Your name, address, and telephone number · A detailed description of the problem · Name of the dealer who sold the vehicle to you

In Puerto Rico and the U.S. Virgin Islands Bella International P.O. Box 190816 San Juan, PR 00919-0816 Tel: 1 (787) 620-7546

Information

https://manual-hub.com/

637

Index

Index
Index
Numbers
12-Volt Battery.......................................... 573 Charging System Indicator ................. 97, 610
A
AAC............................................................ 303 ABS (Anti-lock Brake System)................... 510 Accessories and Modifications ................. 582 Accessory Power Sockets .......................... 235 Acoustic Vehicle Alerting System ............ 434 Adaptive Cruise Control (ACC) with Low
Speed Follow........................................... 464 Indicator (Amber)..................................... 109 Indicator (White/Green) ........................... 109 Adaptive Damper System......................... 434 Additives Coolant ........................................... 547, 549 Engine Oil................................................ 542 Washer.................................................... 552 Additives, Engine Oil ................................ 542 Adjusting Armrest ................................................... 227 Front Seats .............................................. 218 Head Restraints........................................ 225 Mirrors .................................................... 216 Rear Seats................................................ 222 Steering Wheel ........................................ 215 Agile Handling Assist................................ 437 Air Conditioning System (Climate Control System) .................................................... 244
638

Changing the Mode ................................ 245 Defrosting the Windshield and Windows............................................... 246 Dust and Pollen Filter............................... 576 Recirculation/Fresh Air Mode ................... 245 Sensors ................................................... 248 Synchronization Mode............................. 247 Using Automatic Climate Control ............ 244 Air Pressure....................................... 565, 627 Airbags........................................................ 53 Advanced Airbags ..................................... 59 After a Collision ........................................ 56 Airbag Care............................................... 70 Event Data Recorder.................................... 0 Front Airbags (SRS).................................... 56 Indicator............................................ 67, 100 Knee Airbags............................................. 61 Passenger Airbag Off Indicator .................. 68 Sensors ..................................................... 53 Side Airbags .............................................. 64 Side Curtain Airbags.................................. 66 AM/FM Radio............................................ 285 Android Auto ........................................... 326 Anti-lock Brake System (ABS) .................. 510 Indicator.................................................. 100 Apple CarPlay ........................................... 320 Armrest ..................................................... 227 AT&T Hotspot ........................................... 318 Audio Remote Controls ........................... 254 Audio System............................................ 250 Adjusting the Sound................................ 279
https://manual-hub.com/

Audio/Information Screen ....................... 258 Display Setup .......................................... 280 Error Messages ....................................... 333 General Information................................ 335 Home Screen .......................................... 266 How to Update Wirelessly ....................... 273 How to Update with a USB Device .......... 277 How to use Siri Eyes Free ........................ 319 iPod ........................................................ 300 Limitations for Manual Operation............ 281 MP3/WMA/AAC/FLAC/WAV ................... 303 Reactivating ............................................ 253 Remote Controls..................................... 254 Security Code ......................................... 253 Selecting an Audio Source ...................... 281 Status Area ............................................. 271 System Updates ...................................... 273 Theft Protection ...................................... 253 USB Flash Drives.............................. 303, 336 USB Ports................................................ 251 Wallpaper Setup ..................................... 264 Audio/Information Screen ....................... 258 Authorized Manuals ................................ 636 Auto Door Locking/Unlocking ................ 186 Auto High-Beam ...................................... 205 Indicator ................................................. 100 Automatic Brake Hold ............................. 508 Indicator ........................................... 95, 508 Automatic Brake Hold System Indicator ........................................... 95, 508 Automatic Intermittent Wipers .............. 209

Automatic Lighting.................................. 202 Average Fuel Economy ............................ 148 Average Fuel Economy Records .............. 162 Average Speed ......................................... 150
B
Battery ................................................ 13, 573 12-Volt ................................................... 573 Charging (12-Volt Battery) ...................... 574 High Voltage..................................... 13, 446 If the 12-Volt Battery Is Dead .................. 604 Maintenance (Checking the 12-Volt Battery) ................................................. 573 Maintenance (Replacing the Remote Battery) ................................................. 575
Belts (Seat).................................................. 44 Beverage Holders..................................... 232 Blind spot information System................ 443 Bluetooth® Audio..................................... 306 Bluetooth® HandsFreeLink® ................... 381 Booster Seats (For Children)...................... 83 Brake System ............................................ 503
Anti-lock Brake System (ABS) .................. 510 Automatic Brake Hold............................. 508 Brake Assist System................................. 511 Fluid ....................................................... 551 Foot Brake .............................................. 507 Indicator (Amber).................. 90, 91, 92, 612 Indicator (Red) .......................... 89, 611, 612 Parking Brake.......................................... 503

Brightness Control (Instrument Panel) .... 211 Built-in Key ............................................... 174 Bulb Replacement .................................... 553
Brake Lights, Taillights, Rear Side Marker Lights, and Rear Turn Signal Lights......... 556
Fog Lights................................................ 555 Front Side Marker Lights .......................... 555 Front Turn Signal Lights ........................... 555 Headlights ............................................... 553 High-Mount Brake Light .......................... 560 Parking/Daytime Running Lights .............. 555 Rear License Plate Light ........................... 560 Side Turn Signal/Emergency Indicator
Lights .................................................... 555 Taillights, Brake Lights, and Back-Up
Lights .................................................... 558 Bulb Specifications ................................... 626
C
Carbon Monoxide Gas................................ 84 Cargo Hook............................................... 234 Carrying Cargo.................................. 411, 413 Center Pocket ........................................... 230 Certification Label .................................... 628 Changing Bulbs......................................... 553 Child Safety................................................. 71
Childproof Door Locks ............................. 185 Emergency Trunk Opener ........................ 189 Child Seat .................................................... 71 Booster Seats............................................. 83

Child Seat for Infants................................. 73 Child Seat for Small Children..................... 74 Installing a Child Seat with a Lap/Shoulder Seat
Belt ......................................................... 78 Larger Children ......................................... 82 Rear-facing Child Seat ............................... 73 Selecting a Child Seat................................ 75 Using a Tether........................................... 80 Childproof Door Locks ............................. 185 Cleaning the Exterior ............................... 579 Cleaning the Interior................................ 577 Climate Control System............................ 244 Changing the Mode ................................ 244 Defrosting the Windshield and
Windows............................................... 246 Dust and Pollen Filter............................... 576 Recirculation and Fresh Air Mode ............ 245 Sensors ................................................... 248 Synchronization Mode............................. 247 Using Automatic Climate Control ............ 244 Clock.......................................................... 172 CMBSTM (Collision Mitigation Braking SystemTM)................................................. 450 Coat Hook................................................. 234 Collision Mitigation Braking SystemTM (CMBSTM) ................................................. 450 Console Compartment ............................. 231 Controls..................................................... 171 Coolant (Engine) ...................................... 547 Adding to the Radiator............................ 548 Adding to the Reserve Tank..................... 547

Index

https://manual-hub.com/

639

Overheating............................................. 606 Coolant (Inverter) ..................................... 549 Cooling System ......................................... 547 Creeping (Transmission) ........................... 422 Cross Traffic Monitor................................ 519 Cup Holders............................................... 232 Customer Service Information ................. 637 Customized Features ................................ 357
D
Daytime Running Lights........................... 204 Dead Battery (12-Volt) ............................. 604 Deceleration Paddle Selector................... 430
Indicator .................................................... 97 Defaulting All the Settings ...................... 377 Defrosting the Windshield and
Windows.................................................. 246 Devices that Emit Radio Waves................ 629 Dimming
Headlights ............................................... 201 Rearview Mirror ....................................... 216 Dipstick (Engine Oil) ................................. 543 Directional Signals (Turn Signal).............. 200 Door Mirrors ............................................. 217 Doors ......................................................... 174 Auto Door Locking .................................. 186 Auto Door Unlocking............................... 186 Door and Trunk Open Message ................. 43 Keys ........................................................ 174

Locking/Unlocking the Doors from the Inside .............................................. 183 Locking/Unlocking the Doors from the Outside ........................................... 176 Lockout Prevention System...................... 182 DOT Tire Quality Grading ........................ 567 Driver Attention Monitor ........................ 157 Driver Information Interface ................... 143 Switching the Display .............................. 143 Warning and Information Messages ........ 115 Driving ...................................................... 409 Braking ................................................... 503 Shifting ................................................... 423 Transmission ........................................... 422 Turning on the Power.............................. 416 Driving Position Memory System ............ 213 Driving Support Information................... 160 Dust and Pollen Filter............................... 576
E
Eco Assist® System ...................................... 18 Eco Drive Display ........................................ 19 ECON Mode .............................................. 433
Indicator.................................................. 107 Elapsed Time............................................. 150 Electric Power Steering (EPS) System
Indicator.......................................... 102, 613 Electronic Stability Control (ESC)............. 435 Emergency ................................................ 620 Emergency Trunk Opener................ 189, 622

Emissions Testing (Readiness Codes) ...... 631 Engine....................................................... 628
Coolant .................................................. 547 If the 12-Volt Battery Is Dead .................. 604 Oil .................................................. 542, 627 Engine Coolant Adding to the Radiator ........................... 548 Adding to the Reserve Tank .................... 547 Overheating............................................ 606 Engine Oil................................................. 542 Adding ................................................... 544 Checking ................................................ 543 Displaying Oil Life ................................... 534 Low Oil Pressure Warning ....................... 609 Recommended Engine Oil ....................... 542 EPS (Electric Power Steering) System ...... 613 EV Button ................................................... 15 EV Indicator................................................ 94 EV Mode Indicator ..................................... 94 Exhaust Gas Hazard (Carbon Monoxide) ................................................ 84 Exterior Care (Cleaning) .......................... 579 Exterior Mirrors........................................ 217
F
Features .................................................... 249 Filters
Dust and Pollen....................................... 576 Oil .......................................................... 545 FLAC .......................................................... 303

Index

640

https://manual-hub.com/

Flat Tire..................................................... 587 Floor Mats ................................................ 578 Fluids
Brake .............................................. 551, 627 Engine Coolant ............................... 547, 627 Inverter Coolant...................................... 549 Transmission ................................... 550, 627 Windshield Washer ......................... 552, 626 FM/AM Radio ........................................... 285 Fog Lights ................................................. 203 Indicator ................................................. 104 Folding Down the Rear Seat ................... 222 Foot Brake ................................................ 507 Front Airbags (SRS) .................................... 56 Front Seats Adjusting ................................................ 218 Front Sensor Camera ............................... 499 Fuel ..................................................... 30, 525 Economy................................................. 528 Gauge .................................................... 141 Instant Fuel Economy .............................. 148 Low Fuel Indicator................................... 100 Range ..................................................... 148 Recommendation.................................... 525 Refueling ........................................ 525, 623 Fuel Economy ........................................... 528 Fuel Fill Door .............................. 30, 526, 621 Fuses ......................................................... 616 Inspecting and Changing ........................ 619 Locations ........................................ 616, 617

G
Gasoline (Fuel) Economy ................................................. 528 Gauge ..................................................... 141 Information ..................................... 525, 626 Instant Fuel Economy............................... 148 Low Fuel Indicator ................................... 100 Refueling ......................................... 525, 623
Gauges ...................................................... 141 Glass (care) ........................................ 577, 580 Glove Box .................................................. 230
H
Halogen Bulbs........................................... 553 Handling of the Jack ................................ 600 Handling the Unexpected ........................ 585 HandsFreeLink® (HFL) ............................... 381
Automatic Import of Cellular Phonebook and Call History ............................................ 391
Automatic Transferring ............................ 390 Displaying Messages ................................ 401 Favorite Contacts..................................... 392 HFL Buttons ............................................. 381 HFL Menus .............................................. 384 HFL Status Display ................................... 383 In Case of Emergency ...................... 312, 405 Limitations for Manual Operation ............ 383 Making a Call .......................................... 394 Options During a Call .............................. 397

Phone Setup............................................ 386 Receiving a Call ....................................... 397 Receiving a Text Message ........................ 399 Ringtone ................................................. 390 Selecting a Phone.................................... 400 To Set Up a Text Message Options .......... 398 Hazard Warning Button .............................. 6 HD RadioTM ............................................... 288 Head Restraints ........................................ 225 Headlights................................................. 201 Aiming .................................................... 553 Auto High-Beam ..................................... 205 Automatic Operation............................... 202 Dimming ......................................... 201, 204 Operating................................................ 201 Head-Up Display....................................... 166 Heated Steering Wheel............................ 240 Heaters (Seat) ........................... 241, 242, 243 HFL (HandsFreeLink®)............................... 381 High Beam Indicator ................................ 104 High Voltage Battery ............................... 446 Hill Start Assist System ............................. 421 HomeLink® Universal Transceiver............ 378 Honda App License Agreement .............. 337 Honda Sensing® ................................ 31, 447 HondaLink® ............................................. 308 Hybrid Vehicle SPORT HYBRID i-MMD (intelligent Multi-Mode
Drive) ...................................................... 12

Index

https://manual-hub.com/

641

I
Identification Numbers Engine, Motor, and Transmission ............. 628 Vehicle Identification ............................... 628
If the 12-Volt Battery Is Dead .................. 604 Illumination Control
Dial.......................................................... 211 Immobilizer System .................................. 190
Indicator .................................................. 105 Indicators..................................................... 88
12-Volt Battery Charging System ....... 97, 610 Adaptive Cruise Control (ACC) with Low Speed
Follow (Amber) ...................................... 109 Adaptive Cruise Control (ACC) with Low Speed
Follow (White/Green) ..................... 109, 465 Anti-lock Brake System (ABS) ................... 100 Auto High-Beam...................................... 100 Automatic Brake Hold........................ 95, 508 Automatic Brake Hold System............ 95, 508 Cruise Mode (White/Green) ..................... 109 Deceleration Paddle Selector...................... 97 ECON Mode .................................... 107, 433 Electric Power Steering (EPS)
System........................................... 102, 613 EV ............................................................. 94 EV Mode ................................................... 94 Fog Light ................................................. 104 Hazard Warning ...................................... 104 High Beam............................................... 104 Immobilizer System.................................. 105

Lane Keeping Assist System (LKAS) (Amber)................................................. 110 Lane Keeping Assist System (LKAS) (White/Green)........................................ 110 Lights On ................................................ 104 Low Fuel ................................................. 100 Low Oil Pressure Warning........................ 609 Low Tire Pressure/TPMS... 103, 438, 441, 614 Malfunction Indicator Lamp............... 96, 610 Parking Brake and Brake System (Amber)............................... 90, 91, 92, 612 Parking Brake and Brake System (Red) ....................................... 89, 611, 612 POWER SYSTEM........................................ 93 READY ...................................................... 94 Safety Support (Amber) ........................... 111 Safety Support (Green/Gray).................... 114 Seat Belt Reminder .............................. 46, 99 Security System Alarm ............................. 105 Shift Position ............................................. 97 SPORT Mode ................................... 108, 429 Supplemental Restraint System.......... 67, 100 System Message...................................... 106 Transmission System.......................... 98, 615 Turn Signal.............................................. 104 Vehicle Stability AssistTM (VSA®) OFF ............................................... 102, 436 Vehicle Stability AssistTM (VSA®) System .......................................... 101, 435 Information .............................................. 625 Instant Fuel Economy............................... 148

Instrument Panel........................................ 87 Brightness Control .................................. 211
Interior Lights........................................... 228 Interior Rearview Mirror ......................... 216 Inverter Coolant....................................... 549 iPhone....................................................... 336 iPod................................................... 300, 336
K
Key Type and Functions ................................. 174
Key Number Tag ...................................... 175 Keyless Lockout Prevention..................... 182 Keys........................................................... 174
Built-in Key ............................................. 174 Lockout Prevention ................................. 182 Number Tag............................................ 175 Rear Door Won't Open ........................... 185 Remote Transmitter ................................ 181 Valet Key ................................................ 189 Knee Airbags.............................................. 61
L
Lane Keeping Assist System (LKAS) ........ 480 LATCH (Child Seats) ................................... 76 Lights ................................................ 201, 553
Auto High-Beam ..................................... 205 Automatic............................................... 202 Bulb Replacement ................................... 553

Index

642

https://manual-hub.com/

Daytime Running Lights .......................... 204 Fog Lights ............................................... 203 High Beam Indicator ............................... 104 Interior.................................................... 228 Light Switches......................................... 201 Lights On Indicator.................................. 104 Turn Signals ............................................ 200 Load Limits ............................................... 413 Locking/Unlocking ................................... 174 Auto Door Locking/Unlocking ................. 186 Childproof Door Locks ............................ 185 From Inside ............................................. 183 From Outside .......................................... 176 Keys........................................................ 174 Using a Key............................................. 182 Lockout Prevention System ..................... 182 Low Battery Charge (12-Volt) ................. 610 Low Fuel Indicator ................................... 100 Low Oil Pressure Warning ....................... 609 Low Smart Entry Remote Signal Strength.................................................. 175 Low Speed Braking Control .................... 459 Lower Anchors ........................................... 76 Luggage (Maximum Load Limit)............. 413 Lumbar Support ....................................... 219 Lumbar Support Adjustment Switch ...... 219
M
Maintenance .................................... 152, 529 12-Volt Battery ....................................... 573

Brake Fluid .............................................. 551 Cleaning.................................................. 577 Climate Control System ........................... 576 Coolant ........................................... 547, 549 Maintenance MinderTM ............................ 533 Oil ........................................................... 543 Precautions.............................................. 530 Radiator .................................................. 548 Remote Transmitter ................................. 575 Replacing Light Bulbs............................... 553 Safety ...................................................... 531 Service Items ........................................... 537 Tires ........................................................ 564 Transmission Fluid ................................... 550 Under the Hood ...................................... 540 Malfunction Indicator Lamp .............. 96, 610 Map Light Switches .................................. 229 Maximum Load Limit ............................... 413 Meters, Gauges ......................................... 141 Mirrors....................................................... 216 Adjusting................................................. 216 Door........................................................ 217 Exterior.................................................... 217 Interior Rearview ..................................... 216 Modifications (and Accessories) .............. 582 Moonroof.................................................. 196 Motor Number.......................................... 628 MP3 ........................................................... 303 MP3/WMA/AAC/FLAC/WAV ..................... 303 Multi-View Rear Camera .......................... 523
https://manual-hub.com/

N
Navigation ........................................ 151, 170 Numbers (Identification).......................... 628
O
Odometer ................................................. 145 Oil (Engine)............................................... 542
Adding.................................................... 544 Checking................................................. 543 Displaying Oil Life.................................... 534 Low Oil Pressure Warning........................ 609 Recommended Engine Oil ............... 542, 627 Viscosity .......................................... 542, 627 Open Source Licenses............................... 351 Opening Trunk .............................................. 187, 622 Opening/Closing Hood....................................................... 541 Power Windows ...................................... 193 Trunk ...................................................... 187 Outside Temperature Display.................. 146 Overheating.............................................. 606
P
Panic Mode ............................................... 192 Parking...................................................... 512 Parking Brake ........................................... 503 Parking Brake and Brake System Indicator (Amber) ................................. 90, 91, 92, 612

Index

643

Parking Brake and Brake System Indicator (Red) .......................................... 89, 611, 612
Parking Sensor System.............................. 514 Passenger Airbag Off Indicator ................. 68 Passing Indicators ..................................... 201 Phone ........................................................ 153 Playing Bluetooth® Audio ........................ 306 POWER Button.......................................... 197 Power System
Turning on............................................... 416 Won't Start.............................................. 601 POWER SYSTEM Indicator .......................... 93 Power Windows........................................ 193 POWER/CHARGE Gauge ........................... 154 Precautions While Driving Rain......................................................... 422 Pregnant Women ....................................... 51 Puncture (Tire) .......................................... 587
R
Radiator..................................................... 548 Radio (AM/FM).......................................... 285 Radio (FM/AM).......................................... 285 Radio (SiriusXM®)...................................... 289 Radio Data System (RDS).......................... 287 Range ........................................................ 148 RDM
On and Off .............................................. 491 RDS (Radio Data System).......................... 287 Readiness Codes (Emissions Testing) ....... 631

READY Indicator......................................... 94 Rear Defogger/Heated Door Mirror
Button ..................................................... 210 Rear Seat (Folding Down)........................ 222 Rear Seat Heaters ..................................... 243 Rear Seat Reminder.................................. 223 Rearview Mirror ....................................... 216 Refueling .................................................. 525
Fuel Gauge.............................................. 141 Gasoline.................................. 525, 623, 626 Low Fuel Indicator ................................... 100 Refuel Recommend ................................. 407 Regulations............................... 441, 567, 629 Remote Transmitter ................................. 181 Replacement Battery .................................................... 575 Bulbs....................................................... 553 Fuses............................................... 616, 617 Tires ........................................................ 570 Wiper Blade Rubber ................................ 561 Reporting Safety Defects ......................... 630 Resetting a Trip Meter ..................... 146, 148 Reverse Tilt Door Mirror .......................... 217 Road Departure Mitigation (RDM) System ..................................................... 488
S
Safe Driving ................................................ 39 Safety Check ............................................... 43 Safety Labels............................................... 85

Safety Message ............................................ 3 Seat Belts .................................................... 44
Adjusting the Shoulder Anchor ................. 50 Automatic Seat Belt Tensioners ................. 48 Checking .................................................. 52 Fastening .................................................. 49 Installing a Child Seat with a Lap/Shoulder Seat
Belt ......................................................... 78 Pregnant Women...................................... 51 Reminder .................................................. 46 Warning Indicator ............................... 46, 99 Seat Heaters ............................. 241, 242, 243 Seat Ventilation ....................................... 242 Seats.......................................................... 218 Adjusting ................................................ 218 Front Seats.............................................. 218 Rear Seats............................................... 222 Seat Heaters ........................... 241, 242, 243 Seat Ventilation ...................................... 242 Security System ........................................ 190 Immobilizer System Indicator................... 105 Security System Alarm Indicator .............. 105 Select Button Operation ............................................... 425 Selecting a Child Seat ................................ 75 Shift Button Positions Transmission ........................................... 423 Shift Position Indicator ...................... 97, 425 Shoulder Anchor ........................................ 50 Side Airbags ............................................... 64 Side Curtain Airbags .................................. 66

Index

644

https://manual-hub.com/

Siri Eyes Free............................................. 319 SiriusXM® Radio ....................................... 289 Smart Entry with Push Button Start System..................................................... 176 Snow Tires ................................................ 572 Spark Plugs ............................................... 626 Specifications ........................................... 626 Specified Fuel ................................... 525, 626 Speedometer............................................ 141 SPORT Mode............................................. 429
Indicator ......................................... 108, 429 SRS Airbags (Airbags) ................................ 56 Steering Wheel
Adjusting ................................................ 215 Stopping ................................................... 512 Summer Tires............................................ 572 Sunglasses Holder .................................... 233 Supplemental Restraint System (SRS) ....... 56 Switches (Around the Steering Wheel) ............................................ 6, 7, 197 System Message Indicator ....................... 106 System Updates........................................ 273
T
Temperature Outside Temperature Display .................. 146
Temperature Sensor ........................ 146, 248 Tire Pressure Monitoring System (TPMS)..................................................... 438
Indicator ......................................... 103, 614

Tires ........................................................... 564 Air Pressure ..................................... 565, 627 Checking and Maintaining....................... 564 Inspection................................................ 564 Labeling .................................................. 565 Puncture (Flat Tire)................................... 587 Regulations ............................................. 567 Rotation .................................................. 571 Summer .................................................. 572 Tire Chains .............................................. 572 Wear Indicators ....................................... 569 Winter ..................................................... 572
Tools .......................................................... 586 Towing a Trailer ....................................... 415 Towing Behind a Motorhome ................. 415 Towing Your Vehicle
Emergency .............................................. 620 TPMS (Tire Pressure Monitoring
System) .................................................... 438 Indicator .......................................... 103, 614 Traffic Sign Recognition System .............. 493 Transmission ..................................... 422, 423 Creeping ................................................. 422 Fluid ................................................ 550, 627 Operating the Shift Button ...................... 425 Shift Position Indicator ....................... 97, 425 Shifting ................................................... 423 Transmission System Indicator ............................................ 98, 615 Trip Computer .................................. 147, 149 Trip Meter ................................. 146, 148, 150

Troubleshooting....................................... 585 Blown Fuse...................................... 616, 617 Brake Pedal Vibrates.................................. 35 Buzzer Sounds When Opening Door.......... 35 Emergency Towing.................................. 620 Noise When Braking.................................. 36 Overheating ............................................ 606 Power System Won't Start....................... 601 Puncture/Flat Tire .................................... 587 Rear Door Won't Open...................... 35, 185 Warning Indicators ............................ 88, 609
Trunk......................................................... 187 Lid........................................................... 187 Light Bulb................................................ 626 Main Switch ............................................ 189 Unable to Open....................................... 622
Turn Signals .............................................. 200 Indicators (Instrument Panel) ................... 104
Turning on the Power.............................. 416 Does Not Activate ................................... 601 If the 12-Volt Battery Is Dead................... 604
U
Unlocking the Doors ................................ 176 Unlocking the Front Doors from the Inside .......................................... 24, 183 USB Flash Drives ............................... 303, 336 USB Ports................................................... 251 Using the Keyless Access System ............. 176

Index

https://manual-hub.com/

645

Index

V
Valet Key ................................................... 189 Vanity Mirrors ............................................... 9 Vehicle Identification Number................. 628 Vehicle Speed............................................ 169 Vehicle Stability AssistTM (VSA®)............... 435
Off Indicator ............................................ 102 On and Off .............................................. 436 System Indicator ...................................... 101 Ventilation ................................................ 245 Viscosity (Oil)..................................... 542, 627 Voice Control Operation .......................... 282 Voice Portal Screen .................................. 283 Voice Recognition.................................... 282 VSA® (Vehicle Stability AssistTM)............... 435
W
Wallpaper.................................................. 264 Warning and Information Messages ....... 115 Warning Indicator On/Blinking................ 609 Warning Labels ........................................... 85 Warnings ................................................... 152 Warranties (Warranty Manual provided
separately)............................................... 633 Watts ......................................................... 626 WAV .......................................................... 303 Wear Indicators (Tire)............................... 569 Wi-Fi Connection ...................................... 317 Window Washers...................................... 208
Adding/Refilling Fluid............................... 552
646

Switch..................................................... 208 Windows (Opening and Closing) ............ 193 Windshield................................................ 208
Cleaning ......................................... 577, 580 Defrosting/Defogging.............................. 246 Washer Fluid ........................................... 552 Wiper Blades ........................................... 561 Wipers and Washers................................ 208 Winter Tires Snow Tires .............................................. 572 Tire Chains .............................................. 572 Wipers and Washers................................. 208 Automatic Intermittent Wipers ................ 209 Checking and Replacing Wiper Blades ..... 561 Wireless Charger ...................................... 236 WMA ......................................................... 303 Worn Tires ................................................ 564
https://manual-hub.com/

31T WA 6 4 0 OM-17268 0 0 X 31-T WA- 6 4 0 0

Printed in U.S.A.