CLAUDIA Quick Start Guide

Connecting Power

This section details how to connect power to your CLAUDIA device.

Diagram: The diagram shows the rear panel of the CLAUDIA device, identifying various ports including USB Type C, Micro USB, USB, and Ethernet. A USB-C power cable is depicted connecting to the designated USB Type C port. The device is identified as the "CLAUDIA Classroom Link Advanced Unit for Delivery of Instruction and Audio".

To connect power, locate the USB-C input port on the back of the CLAUDIA device and plug in the supplied USB-C Power Supply.

Paring Instructions

Follow these steps to pair microphones with the CLAUDIA device.

Step 1: Access Configuration ScreenThe pairing process is managed through the device's configuration screen. To access this screen, press the corners of the display in the order indicated by the numbers 1, 2, and 3.

Diagram (Step 1): This diagram illustrates a touch-sensitive screen interface. Numbered indicators guide the user: '1' points to the top edge, '2' to the right edge, and '3' to the bottom edge of the screen, signifying the sequence for navigation.

Step 2: DECT Pairing and BalancingBegin the pairing process by ensuring two microphones are paired to the XD Receiver and are powered on. Once channels 1 and 2 are active, press the “DECT” button. The CLAUDIA device will initiate pairing, signaled by an audible beep. To finalize the pairing and balancing, press the “Balance” button. You will hear audible beeps during this balancing phase, which may take several minutes. The process is complete when the beeps cease. Press “OK” to return to the main screen.

Diagram (Step 2): This diagram displays the DECT pairing screen with options such as "Static", "DHCP", "Theme", "Dark", "Light", and "Balance". Key controls are highlighted with numbered arrows: '1' indicates the "DECT" button, '2' indicates the "Balance" button, and '3' indicates the "OK" button.

A placeholder for a QR code is shown, labeled "QR CODE GOES HERE". Below this, it references "CLAUDIA Manual".