SONOFF SNZB-03 Motion Sensor Quick User Guide V1.0
Product Overview
The SONOFF SNZB-03 is a Zigbee motion sensor designed for smart home automation. It works with the SONOFF Zigbee Bridge to communicate with other devices and enable intelligent operations.
Key Features:
- Detects motion and triggers actions in your smart home.
- Requires a SONOFF Zigbee Bridge for smart operation.
- Compatible with gateways supporting Zigbee 3.0 wireless protocol.
Getting Started
Follow these steps to set up your SNZB-03 motion sensor:
- Step 1: Pull out the battery insulation sheet.
- Step 2: Download the eWeLink APP. Available on the App Store and Google Play.
- Step 3: Add sub-devices. Ensure your Zigbee Bridge is connected before adding the sub-device.
Pairing Instructions
- Open the eWeLink APP and select the Zigbee Bridge you want to connect.
- Tap "Add" to add a sub-device.
- Press and hold the reset button on the SNZB-03 for 5 seconds until the LED indicator flashes three times. This indicates the device has entered pairing mode.
- Wait patiently for the pairing to complete.
- If pairing fails, move the sensor closer to the Bridge and try again.
User Manual and Support
For detailed user manuals and help, scan the QR code or visit: https://www.sonoff.tech/usermanuals
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, the user is encouraged to try to correct the interference by:
- Reorienting or relocating the receiving antenna.
- Increasing the separation between the equipment and receiver.
- Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consulting the dealer or an experienced radio/TV technician for help.
EU Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type SNZB-03 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.sonoff.tech/usermanuals
Product Information
| Brand | SONOFF |
|---|---|
| Model | SNZB-03 |
| Material | 105g coated paper, 4-color printing, accordion 7-fold brochure |
| Dimensions (Unfolded) | 280x70mm |
| Dimensions (Folded) | 40x70mm |
Contact and Social Media
If you have a problem with the product, please contact support@itead.cc.
Follow SONOFF for the latest news:
- YouTube
Share your experience on Amazon, with friends and family, or on your social media.
