Lumary Smart Wi-Fi LED Downlight Start Guide

What's in the Box

• Lumary Smart Wi-Fi LED Downlight
• LUMARY SMART Wi-Fi LED DOWNLIGHT START GUIDE

Get Ready

• Ensure you know your Wi-Fi network name and password.
• Your mobile device should be running iOS 13.3 or higher, or Android 9.0 or higher.
• Connect to a 2.4GHz Wi-Fi network. Lumary devices do not support 5GHz networks.

Attention

1. Handle the product carefully during transportation.
2. Do not disassemble the fixture if you are not a professional.
3. The fixture operates under AC high voltage. It must be installed in a location that cannot be easily touched. Ensure all connections are completely sealed and earthed.
4. The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.
5. The light source in this luminaire can only be replaced by the manufacturer, its service agent, or a similarly qualified person.
6. The surface where the fixture is positioned must be firm enough to ensure safety.
7. Ensure the voltage of the electricity system is within the working voltage range for the fixture to maintain its lifetime.
8. Installation and maintenance should be performed by a professional.

Product Installation & Reset

The following diagrams illustrate the device reset process. The physical installation steps are not detailed here but typically involve connecting the downlight to your home's electrical wiring.

Device Reset Procedure

To reset the LED Downlight and prepare it for pairing:

• Easy Mode: Press the switch 5 times (turn on-off-on-off-on). The light will flash quickly (2x per second). This is the primary mode for app connection.
• AP Mode: From Easy Mode, press the switch again (turn on-off-on-off-on) until the light flashes slowly (every 3 seconds). This is a backup mode for connection.

Note: If the indicator is already blinking or breathing, you may be able to skip the reset step. Refer to the user manual for specific details.

Connecting Your Lumary Device

1. Install the "Lumary" APP

Download and install the Lumary app from the App Store or Google Play.

Screenshots Description: The screenshots show the Lumary app interface on both iOS (App Store) and Android (Google Play), displaying the app's availability and installation process.

2. Register a Lumary Account

Enter your mobile phone number or email address to register. Please select your region and country correctly.

Screenshots Description: The screenshots show the registration and login screens of the Lumary app, prompting for email, password, and region selection.

3. Connect: Easy Mode

Open the Lumary App. Navigate to the Devices screen, tap the '+' icon in the top corner, and select 'Add Device'. Choose 'Lighting' > 'Light Source (BLE+Wi-Fi)'. Select 'EZ Mode' in the upper right corner.

Screenshots Description: The screenshots guide the user through selecting the device type and mode within the Lumary app. It also shows the phone connecting to the device's Wi-Fi hotspot.

Note: Lumary cannot connect to 5GHz networks. Ensure you are connecting to a 2.4GHz network.

Enter your Wi-Fi network name and password. Press 'Next' to proceed.

Screenshots Description: The screenshots show selecting the 2.4GHz Wi-Fi network and entering the password, followed by connecting the mobile phone to the device's hotspot.

The Lumary App will connect to your devices. Keep the network stable during this process.

Screenshots Description: The final screenshot shows the 'Adding device...' progress indicator.

4. Connect: AP Mode

Open the Lumary App, tap '+' and choose 'Light Source (BLE+Wi-Fi)'. Select 'AP Mode' in the upper right corner.

Screenshots Description: The screenshots show selecting 'AP Mode' from the device connection options.

Ensure the light is slowly flashing white. If not, reset the device to reach AP Mode.

Screenshots Description: The screenshots guide the user to confirm the light's flashing status and proceed.

Connect your mobile phone to the device's hotspot (e.g., 'Lumary-XXXX').

Screenshots Description: The screenshots show the process of connecting the phone to the device's Wi-Fi hotspot.

Follow the instructions to choose the device from your Wi-Fi list.

Screenshots Description: The screenshot shows the phone's Wi-Fi settings, listing available networks including the Lumary device's hotspot.

5. Connect: Bluetooth

Open the Lumary App, tap '+' and choose 'Light Source (BLE+Wi-Fi)'. Select 'Bluetooth' in the upper right corner.

Screenshots Description: The screenshots show selecting 'Bluetooth' as a connection method.

Reset the device first. Power on the light and confirm that the light has already flashed or breathed.

Screenshots Description: The screenshots prompt the user to confirm the light's flashing status before proceeding with Bluetooth pairing.

Make sure the light is rapidly flashing white. If not, reset to reach Easy Mode to connect. Press 'Next' in the App.

Group Control

You can group multiple Lumary devices together for easier management.

1. Create a Group

Log in to the Lumary APP, tap a smart device, and click the '...' icon in the top right corner.

Screenshots Description: The screenshots show the Lumary app interface, highlighting the device list and the '...' menu for device options.

Click 'Create Group', then select the devices you want to include in the group and save.

Screenshots Description: The screenshots show the 'Create Group' screen where users can select devices and add them to a new group.

2. Name and Save the Group

You can reset the group name and save it. The group can then be used to control the selected devices collectively.

Screenshots Description: The screenshots show entering a custom name for the group and then displaying the created group in the main device list.

FAQ (Frequently Asked Questions)

1. What if I don't have internet access to my Lumary product?

If you do not have a network, you will need two mobile phones: one to set up a hotspot, and the other to connect to the hotspot and add the device via the app.

2. If my Wi-Fi internet goes down, will Lumary App still work?

Lumary products require Wi-Fi for remote use. However, devices can still be controlled via LAN or Bluetooth for basic functions like on/off, dimming, and color changes.

3. Why does flickering occur with Lumary products?

Flickering usually indicates the device has not connected to the network. By default, it will flash for three minutes when powered on. Once connected to the network, it will stop flashing and reconnect automatically after being switched off and on via the wall switch (within 15 seconds).

4. Can I share with family and friends?

Yes, you can share access to your Lumary devices. In the Lumary App, select a device, tap the '...' button, and choose 'Share Device' to manage permissions. The other user must have the Lumary App installed and an account registered.

5. Can I group multiple Lumary devices together?

Yes, you can group devices by room, location, or any other criteria. Devices can belong to multiple groups. To create a group, select a device, tap '...', choose 'Create Group', name it, and select other devices to add.

6. How do I rename my Lumary device?

From the main device list, select a device, tap the '...' button for advanced settings, and choose 'Modify Device Name' (or 'Modify Group Name'). You can then enter a more familiar name.

7. What's the wireless range?

The wireless range depends on your home router and room conditions. Consult your router's specifications for exact range data.

8. What should I do if the device appears offline or is unreachable?

Ensure your Wi-Fi router is online and within range. Check for firmware updates in device settings. Try turning off the device, clearing the app cache, rebooting the router, and then turning the device back on after one minute. Check the device status after five minutes.

9. How many devices can I control?

• Max timers per device: 30
• Max devices per home: 120
• Max Tap-to-Run creations per home: 100
• Max Automations per home: 100
• Max tasks in Tap-to-Run: 150
• Max tasks in Automation: 150
• Max conditions in Automation: 10
• Max mobile devices logged in simultaneously: 200
• Max Homes per App account: 20
• Max home members per home: 20
• Max rooms per home: 20
• Max devices per room: 50
• Max devices per device group: 100
• Max device groups per home: 20
• Max device groups shared with users: 20
• Max devices shared with users: 20
• Max App accounts invited by other homes: 20

10. What if I find a problem with the purchased product?

Please email support@lumary.tech with your Amazon order ID. Lumary is dedicated to ensuring 100% satisfaction and will assist with exchanges if necessary.

11. How do I reset the device?

If the device is connected to the network, press and hold the control button for 5 seconds until the indicator light flashes rapidly. To reconnect to Wi-Fi, use the wall switch: on-off-on-off-on for Easy Mode (rapidly blinking white light), or on-off-on-off-on again for AP Mode (slowly blinking white light).

Important Information

Troubleshooting

Cannot connect to Wi-Fi: Ensure the correct Wi-Fi password was entered. Check for internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

Parameter Information

[FCC Mark] [RoHS Mark] [CE Mark]

FCC ID: 2AKG3-US-DL6B-1

Made in China

Voice Control Guide

Name and Control Each Device by Voice

Voice Control Quick Guide for Amazon Alexa

Screenshots Description: The screenshots show the Lumary app interface for linking with Amazon Alexa, including the 'Sign In With Amazon' button and examples of voice commands.

1. Log in to the Lumary APP, tap the smart device, and click the '...' icon in the top right corner.
2. Tap 'Alexa' in Third-party Control.
3. Tap 'Sign In With Amazon'.
4. Tap 'Allow' to sign in to Lumary.
5. Once linked successfully, new devices can be discovered by Alexa without re-linking.

Things you can say:

• "Alexa, discover my devices."
• "Alexa, turn on the bedroom light."
• "Alexa, set the bedroom light to orange."
• "Alexa, turn off the coffee machine."
• "Alexa, set the living room to 50%."
• "Alexa, dim porch light."

*Some commands require compatible devices.

Voice Control Quick Guide for Google Assistant

Screenshots Description: The screenshots illustrate the Lumary app interface for linking with Google Assistant, showing the 'Link with Google Assistant' button and example voice commands.

1. Log in to the Lumary app, tap the smart device, and click the '...' icon in the top right corner.
2. Tap 'Google Assistant' in Third-party Control.
3. Tap 'Link with Google Assistant'.
4. Click 'Agree and link'.
5. Once linked successfully, new devices can be discovered by Google Home without re-linking.

Things you can say:

• "Hey Google, turn on all the lights in my bedroom."
• "Hey Google, turn off the light."
• "Hey Google, set the bedroom light to orange."
• "Hey Google, turn off the coffee machine."
• "Hey Google, set the living room to 50%."
• "Hey Google, dim porch light."

*Some commands require compatible devices.

Contact Us

For any questions about use and operation, please contact Lumary customer service.

Customer Service Email: support@lumary.tech

You can also find Lumary on social media platforms:

• Facebook: US-Smart Home
• YouTube: Lumary Official
• Instagram: lumary Smart Home
• Twitter: Lumary @Lumarysmarthome
• Pinterest: Lumary Smart Home