7 ore fa — User Manual. 10. 3. Lower Stand. Fan Blade Assembly Knob. Rear Grille Knob. 5. 6. Fan Grille Screw × 1. 8. Mi Smart Standing Fan 2 User Manual 1. Mi ...
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Xiaomi Mi Smart Standing Fan 2 o cerca il tuo prodotto tra le migliori offerte di Trattamento Aria Mi Smart Standing Fan 2 User Manual Safety Instructions Read this manual carefully before use, and retain it for future reference. WARNINGS Improper use may lead to electric shocks, fire, personal injury, or other damage. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. (For European countries or regions) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. (For no European countries or regions) Children should be supervised to ensure that they do not play with the appliance. Do not use this fan in a place where it will easily fall over or where there are other unstable objects nearby. Do not use this fan in hot and humid environments such as a bathroom. Do not use this fan if its power cord is damaged or its power plug is loose. Do not use this fan if its front grille is not installed, or its rear grille is loose or fell off. Do not allow children or adults who are incapable of operating this fan to use this product. Do not a empt to disassemble or repair this fan by yourself. Do not excessively pinch, bend, or twist the power cord to prevent from exposing or breaking its core. Do not insert your fingers or any object into the front grille, rear grille, or the fan blades when the fan is in use. Keep hair and fabrics away from the fan to avoid ge ing them caught in the fan. Do not use any improper power outlet. Do not use the power cord provided with this fan for any other device. Make sure the fan is disconnected from the electrical outlet before removing the grille. Safety Instructions Read this manual carefully before use, and retain it for future reference. When maintaining and cleaning, disassemble the fan base before removing other parts. Make sure you install the fan base last when assembling the fan. Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user. Ensure that the fan is switched off from the supply mains before removing the guard. PRECAUTIONS Installation To avoid electric shocks, fire, personal injury, or other damage, please strictly follow the installation steps instructed by the user manual, and make sure the fan base is assembled in the last step. Do not connect the fan to the electrical outlet until it is fully assembled. Transportation If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. Do not strike, crush, and drop the product, or expose it to pressure. Keep the product away from water and heat sources. Turn off and unplug the fan before moving it. Firmly hold the fan stand to avoid it from falling down and causing personal injury. Using the Fan Do not use this product in environments where the temperatures and humidity are extremely high. Avoid direct sunlight. Immediately stop using the fan if it makes unusual sounds, gives off bad odors, overheats, or rotates irregularly. Do not lean on or tilt the fan while it is running. Do not shake the fan's head repeatedly so as to avoid damage to the internal mechanism. Power Cord Disconnect the fan from the electrical outlet before doing maintenance or moving it. Always unplug the fan by pulling the power plug rather than the cord. When the power cord is damaged, it must be replaced with a genuine one purchased from the manufacturer or a er-sales service department. 2 Package Contents Lower Stand Base 5 Fan Blade Assembly Knob 6 Rear Grille Knob Fan Assembly (front grille, fan blade assembly, rear grille) Motor & Upper Stand Hex Key 8 Fan Grille Screw × 1 9 Power Cord Mi Smart Standing Fan 2 User Manual 1 Mi Intelligenter Standventilator 2 Benutzerhandbuch 12 Manuale utente Mi Smart Standing Fan 2 23 Manuel d'utilisation de Mi Smart Standing Fan 2 34 Manual de usuario de Mi Smart Standing Fan 2 45 - Mi 2 56 Mi Smart Staande Ventilator 2 Gebruikershandleiding 66 Manual do usuário do Ventilador Inteligente de Coluna Mi 2 77 WARRANTY NOTICE 88 GARANTIEERKLÄRUNG 90 AVVISO SULLA GARANZIA 93 GARANTIE 95 AVISO DE GARANTÍA 97 99 GARANTIE 102 AVISO DE GARANTIA 104 10 User Manual Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements. 3 Product Overview Installation Top View Natural Breeze Indicator Wi-Fi Indicator Step 1: Install the fan base Speed/Scheduled Turn-off Indicator On/Off Bu on Speed Adjustment/Mode Switch Bu on Oscillation Bu on Scheduled Turn-off Bu on Center Point Indicator (no light effect): Center point of the oscillation range of the fan. Standing fan mode: Connect motor & upper stand to the 3 lower stand, and then connect 3 lower stand to the 4 base, as illustrated. Once you hear a click, the parts have been installed successfully. Fan Assembly Motor & Upper Stand Lower Stand Base Release Bu on Release Bu on Power Port 4 Table fan mode: Connect motor & upper stand to the 4 base. Once you hear a click, the parts have been installed successfully. 3 Note: Press the release bu on to remove the lower stand. 4 Installation Step 2: Open the fan assembly Turn the 11 front grille counterclockwise until it separates from the 13 rear grille. Remove the front and rear grille, then take out the 12 fan blade assembly. Step 3: Install the rear grille Install the 13 rear grille onto the motor with " " facing upwards, and then install and turn the 6 rear grille knob clockwise to firmly fix the rear grille to the sha of the motor. Fan Assembly 11 Front Grille 12 Fan Blade Assembly 13 Rear Grille 6 13 Step 4: Install the fan blade assembly Align the center hole of the 12 fan blade assembly with the motor's sha to install it into position, then install the 5 fan blade assembly knob onto the motor's sha . Turn the knob counterclockwise to fix the fan blade assembly to the motor's sha . 5 12 5 Installation How to Use Step 5: Install the front grille Align the front grille alignment mark with the rear grille le alignment mark, and make sure the 11 front grille is properly embedded into the 13 rear grille. Turn the front grille clockwise until the front grille alignment mark aligns the rear grille right alignment mark. Make sure the grilles are securely fastened. Rear Grille Right Alignment Mark Connecting to an electrical outlet Connect the power cord to the power port on the base and then plug it into an electrical outlet. When you hear a beep, the fan is successfully connected to the power supply. Rear Grille Le Alignment Mark Front Grille Alignment Mark Front Grille Alignment Mark Top View before Fastening the Front & Rear Grille Top View a er Fastening the Front & Rear Grille 11 13 Step 6: Fasten the front grille Insert 8 fan grille screw into the hole at the bo om of the fan grille. Turn the screw clockwise 8 by using the included 7 hex key to tighten it. 7 6 Turning On/Off Turning On Press the bu on to start the fan. When turned on for the first time, the default speed is slow (1) and the mode is direct breeze. Turning Off Press the bu on to stop the fan while it is running. Switching Speed/Mode Switching Speed Press the bu on to adjust the speed, and the corresponding indicators will light up (see table below). A er the fan is turned off and turned back on again, the speed will be the last used one. Speed Slow (1) Medium (2) Fast (3) Turbo (4) Indicator Note: means the indicator is on; means the indicator is off. How to Use Switching Mode Press and hold the bu on to switch between direct breeze and natural breeze. The indicator is off while in direct breeze mode and is on while in natural breeze mode. A er the fan is turned off and turned back on again, the mode will be the last used one. Enable/Disable Oscillation Press the bu on to enable or disable oscillation. You can set the oscillation angle range in the app. A er the fan is turned off and turned back on again, the oscillation se ing will be the last used one. Unplug then plug the fan in or reset the Wi-Fi connection, then turn on the fan. It will automatically oscillate its angle if enabling the oscillation function. The oscillation time varies depending on different angles, please wait with patience. Note: When the Wi-Fi connection is reset, the oscillation angle range will change to the default angle of 90°. Scheduled Turn-off Press the bu on to cycle through the scheduled turn-off times: 1 hour, 2 hours, 3 hours, 4 hours, and disabled, and the corresponding indicator(s) will light up (see table below). Five seconds a er using the scheduled turn-off function, the indicator(s) resume to indicate the corresponding status of the current speed. Scheduled Disabled 1 hour 2 hours 3 hours 4 hours Indicator Note: means the indicator is on; means the indicator is off. Note: For more scheduled turn-off options (up to 8 hours), please go to the Mi Home/Xiaomi Home app. 7 Adjust the Airflow Direction Gently li or push down the fan's head or fan grille to adjust the airflow upwards or downwards. 23° upwards 16 °downwards Connect with the Mi Home App This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap"+"on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Note: The version of the app might have been updated, please follow the instructions based on the current app version. Connecting to Wi-Fi Simultaneously press and hold the bu ons and . Once you hear a long beep, the fan is awaiting a connection, then you can pair it with a device via the app. How to Use Wi-Fi Status & Indicator Description Wi-Fi Status Awaiting Connection Connecting Connected Fail to Connect Indicator Blinking orange Blinking blue Blue Orange Care & Maintenance Washable Parts The parts listed below can be cleaned with a so cloth or sponge using water or neutral detergent. Rese ing Wi-Fi Connection Simultaneously press and hold the bu ons and . Once you hear a long beep, the Wi-Fi connection has been reset successfully and then the fan is awaiting a connection. The Wi-Fi connection needs to be reset on the circumstances listed below: The Mi account that the fan is paired with has been changed. The router that the fan is connected to has been changed. The account or password of the router that the fan is connected to has been changed. The Mi Home/Xiaomi Home app is unable to control the fan. Enabling/Disabling Wi-Fi Connection Simultaneously press the bu ons and when the fan is working, then the Wi-Fi connection is disabled and the fan is turned off. When the fan is turned on, the Wi-Fi connection is enabled automatically. 11 12 13 6 Front Grille Fan Blade Assembly Rear Grille Rear Grille Knob Note: Stop and unplug the fan, then disassemble it and clean its parts. A er cleaning, make sure all parts are completely dry before installing them and using the fan again. Avoid direct sunlight. Not Washable Parts The parts listed below can be wiped clean with a so , dry cloth. Child Lock Function To disable the function of child lock, go to the page of Mi Smart Standing Fan 2 in the Mi Home/Xiaomi Home app, or simultaneously press and hold the bu ons and until you hear a long beep. Note: Rese ing the Wi-Fi connection or unplugging and plugging in the fan again can also disable this function. 5 4 Fan Blade Assembly Knob Base Lower Stand Note: Do not rinse the parts listed above with water. Motor & Upper Stand Do not use thinner, gasoline, detergent or alkaline detergent to clean any parts. 8 Troubleshooting Fault The fan doesn't work Unable to connect to Wi-Fi Fan blades are stuck The oscillation function does not work. Possible Cause The fan is not connected to the power. The power cord is not properly connected to the power port. The stand does not properly connect to the fan base. Child lock is enabled. The Wi-Fi connection is 5 GHz. The fan has been offline for more than half an hour. Fan blades are stuck by a foreign object. The fan is under the auto-oscillation state. Solution Connect the fan to an electrical outlet that meets the fan's requirements. Make sure the power cord is plugged in properly. Install the fan base with the stand correctly. Disable the child lock function. Connect to a 2.4 GHz Wi-Fi network. Reset the Wi-Fi connection. Unplug the fan and remove the foreign object. Wait for the auto-oscillation completes. It will last for 14 seconds at most. 9 Specifications Name Mi Smart Standing Fan 2 Rated Voltage 100-240 V~ Power Cord Length 1.5 m Model BPLDS02DM Rated Frequency 50/60 Hz Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n 2.4 GHz Type Standing Fan Rated Power 15 W Color White Item Dimensions 343 × 330 × 1000 mm Net Weight 3 kg Noise Emission 58 dB(A) *Radio frequency and radio transmission power RF Specification 2.4 G Wi-Fi Operation Frequency 2412-2472 MHz Maximum Output Power <20 dBm Product Information Requirements Maximum fan flow rate (F) Fan power input (P) Service value (SV) Maximum air velocity(c) Measurement standard for service value Standby power consumption (PSB) Fan sound power level (LWA) Seasonal electricity consumption (Q) Contact details for obtaining more information Test data 23.88 m³/min 13.1 W 1.82 (m³/min)/W 3.56 meters/sec EN IEC 60879:2019 0.247 W 57.1 dB(A) 4.469 kWh/a Zhejiang Xingyue Electric Equipment Co., Ltd. South Side, 24th Floor, Jinpin Building, Headquarters Center, Yongkang City, Zhejiang Province, China 10 Regulatory Compliance Information Hereby, Zhejiang Xingyue Electric Equipment Co., Ltd. declares that the radio equipment type BPLDS02DM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: h p://www.mi.com/global/service/support/declaration.html All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. For detailed e-manual, please go to www.mi.com/global/service/userguide Manufactured for: Xiaomi Communications Co., Ltd. For further information, please go to www.mi.com Manufactured by: Zhejiang Xingyue Electric Equipment Co., Ltd. (a Mi Ecosystem company) Address: South Side, 24th Floor, Jinpin Building, Headquarters Center, Yongkang City, Zhejiang Province, China V1.0 11Adobe Illustrator CC 22.0 (Macintosh) 7Pixel srl using ABCpdf