3-Link Battery Camera TB1 User Manual

Model: TB1

Product Overview

This document provides information for the 3-Link Battery Camera TB1.

Key Components:

Power button
Charging Port
Spotlight
Photoresistor
Indicator Light
PIR Sensor
Microphone
Wall Mount
SD Card Slot
Reset Button

Note: The solar panel is not included in the TB1 L version.

Warranty and Support

Warranty: 30 days return policy and 24 months limited warranty.

Customer Service: For timely customer service, contact support@3-link.com.

Mobile App: Download the "3-Link" app from Google Play or the App Store.

Further Support:

YouTube: Search for "3-Link" for product setting guide videos.
Facebook: Connect with the "3-Link support team" for instant after-sale support.

How to Set Up

Take out the camera and charge it for 30 minutes.
Download the "3-Link" app on Google Play or the App Store and sign up.
Connect your phone to a 2.4G Wi-Fi network.
Sign in to the APP and long-press the reset button for 3 seconds.
When the indicator light flashes, click "+" and follow the on-screen steps in the app to complete the connection.
Ensure the battery power is above 80%. If not, charge the camera to meet this requirement.
Mount the camera in your desired location.

Troubleshooting Tips for Connection

Connection may fail under the following conditions:

The Wi-Fi password contains special characters.
The Wi-Fi password is longer than 20 characters.
The name of the 2.4G Wi-Fi is the same as the 5G Wi-Fi.

If you encounter any problems, please contact the support team for assistance.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Download the App

Available on: