User Guide for DURALINE models including: Automatic Forehead Thermometer Touchless Infared
Alarm temperature setting: Press the SET button to F3, it is the alarm setting state of the body mode. Press the left and right buttons to switch the alarm.
3. Temperature unit setting: Press the SET button to F1, press the left and right buttons to switch between Celsius and Fahrenheit. ·c:Celsius "F:Fahrenheit
4.Mode setting: Press the SET button to F2, press the left and right buttons to switch the working mode.
Body Mode
Fl
5. Alarm temperature setting: Press the SET button to F3, it is the alarm setting state of the body mode. Press the left and right buttons to switch the alarm temperature between 37.0~38.0. The default is 37.3 "C. Note: The alarm temperature is only valid in the body mode.
F2
6. Volume setting: Press the SET button to F4, it is the volume setting state. Press the left and right buttons to adjust the volume. The more parentheses behind the small speaker, the greater the volume, and the disappearance of the small speaker represents mute.
J-1rI1 -J1
F3
7. Backlight setting: Press the SET button to F5, it is the backlight setting state. Press the left and right buttons to tum the backlight on or off. ON: tum on the backlight OFF: tum off the backlight
LrI1ni I
FS
9. Output signal setting: Press the SET button to F7, press the left and right buttons to switch the output signal type. S1 represents the switch mode and S2 represents the pulse mode. For more instructions about output signals. please refer to output signal user guide.
r J
F'l
FY
8. Language setting: Press the SET button to F6, press the left and right buttons to switch the language of thevoice broadcast. CH: Chinese EN: English
LrIuI
F5
10.USB connection: Connect to the computer with Type C USB cable, open the software on the computer, you can connect with the device and store t he measurement results in real time. For more instructions, please refer to software user guide.
11. Battery installation: Open the battery cover and install the new battery correctly according to the battery polarity.
o D
Do
o D
Do
D
12. Install method: nail hook, bracket fixing
o D
Do
(1.Nail hook)
(2.Bracket fixing)
1.lt is the user's responsibility to ensure the electromagnetic compatibility environment of the device so that the device can work normally.
2.lt is recommended to evaluate the electromagnetic environment before using the device. 3.When changing the operating environment, the device must be left to stand for more than
30 minutes. 4.Please measure the forehead to the thermometer. 5.Please avoid direct sunlight when using outdoors. 6.Keep away from air conditioners, fans, etc. ?.Please use qualified, safety-certified batteries, unqualified batteries or non-rechargeable
batteries used may cause fire or explosion.
User Guide
3.Display Description
Count Mode Body Mode Surface Mode
Output si nal interface
Infrared temperature sensor
Hanging hole 0
Alarm Light
Battery cover
Set button
G·MiiiiH:h 1. Accuracy: ±0.2 degrees (35-42t:, place it in the operating environment for 30 minutes before use) 2. Alarm Function: abnormal automatic alarm, flash + sound alarm for about 1O seconds 3. Measuring distance: 5cm~10cm automatic measurement 4. Display: LCD display 5. Transmission interface: USB Type C 6. Adaptable power supply: 4 AA batteries (external power supply and internal power supply can be switched) 7. Install method: nail hook, bracket fixing 8. Environment temperature: 1Ot:~40t: {recommended 15t:~35 ·c) 9. Measuring range: 0~50 ·c 10. Response time: 0.5s 11. Standby: 30s automatic standby during non-working hours 12. Input: DC 5V 500mA 13. Weight:303g 14. Dimensions: 170X115X140mm 15. Counting capacity: 9999 limes
0 Working mode: count mode, body mode, surface mode. 8 Status indication: expression, USB connection status, volume, power.
9 Measurement result: temperature status or count status. 0 Temperature unit: Celsius or Fahrenheit. 9 Setting item or historical record: M** indicates the historical record number;
F* indicates the setting item number.
0 History Temp or Environment Temp.
0 Environment temperature status.
ifiN@iffo®M:h
1.Standby: The backlight is turned off and the temperature remains displayed. (Fig. 1)
2. Insufficient power: The display indicates that the battery is empty and the icon flashes.(Fig. 2)
Body Mode
M D I Environment Temp 2'1.2 (Fig. 1)
-=,1cr1. Body Mode
@
M D I Environment Temp 2'1.2
(Fig. 2)
3.Normal temperature: Flashing green lights on both sides
5
·
ood,Modo
36.S c
MDI ,..rron,,,.ntromp 2'1.2
· ·
J '-- @@ ,,,
\ I
I
(Fig. 3)
4.Abnormal temperature: Flashing red lights on both sides
· ·
3B. c ·-· MI """"'""'"n,mp 2'l.2
· ·
-
-
\ J ·'-- @@) ,I
I
I
(Fig. 4)
5.Out of range(in body mode) 'Lo': Ultra-low temperature than 35 degrees Celsius(Fig. 5) 'HI': Ultra-high temperature than 42 degrees Celsius(Fig. 6)
Body Mode
Q ···
I,_.r_., C
MD I Environment Temp 2'1.2
(Fig. 5)
Body Mode
Q
H II
···
oc
MD I Environment Temp 28.'-I
(Fig. 6)
5.Operation Instruction
1.Temperature measurement: Front of the thermometer, approach it within 5-10cm.(Fig. 7)
2.History temperature query:
Press the left and right buttons to query
the historical temperature, M** represents
the current historical temperature.The
..,. device currenfly supports up to 30 historical
temperatures.
Body Mode
Q
J-,rCI r oc
History Temp MD3 Environment Temp 2'1.2
Duraline Systems, inc. - 39 Western Hwy, West Nyack, NY 10567 - (P) 877-561-0500 - Email: sales@duralinesystems.com
Adobe PDF library 10.01