Setting Up Your RetroN S64
Diagram Overview
The diagram illustrates the Hyperkin RetroN S64 Console Dock and its connections:
- Top Left: Shows the rear of the dock with ports labeled '1' and '2'. Port '1' indicates connections for HDMI and USB-C power. Image '2' shows the necessary cables: a USB-C power cable and an HDMI cable.
- Bottom Left: Shows the front of the dock, highlighting three USB ports for accessories or charging.
- Top Right: Depicts a Nintendo Switch console being docked into the RetroN S64. Image '3' points to the console slot.
- Bottom Right: A circular graphic with arrows, a lightning bolt ⚡, and a screen icon ?, symbolizing the switching between TV Mode and Charging Mode, or entering sleep mode.
Setup Instructions
- Plug in your HD cable (not included) and Type-C power cable (not included) into their designated ports on the back of the RetroN S64.
- Connect the other end of the HD cable to your HDTV and the USB end of the Type-C power cable into a USB 5V 1A power source (not included).
- With your console powered on, dock your console (not included) in the console cradle. Press the Toggle Button on the front of the RetroN S64 to switch from Charging Mode to TV Mode. You can also play using the console's screen in Charging Mode.
- You can connect up to 3 accessories compatible with Nintendo Switch® (not included) into the 3 USB ports on the console dock. These ports can also be used to charge other devices.
- When finished playing, press the Toggle Button to switch from TV Mode to Charging Mode, and then press the Power Button on your console to enter Sleep Mode.
Important Notes
Note: The Nintendo Switch Lite® does NOT work with TV Mode.
Firmware Updates
For firmware updates, please visit: www.hyperkin.com/downloads/firmware
Legal Information
© 2020 Hyperkin Inc. Hyperkin® is a registered trademark of Hyperkin Inc. Nintendo Switch® and Nintendo Switch Lite® are registered trademarks of Nintendo® of America Inc. This product is not designed, manufactured, sponsored, endorsed, or licensed by Nintendo® of America Inc. in the United States and/or other countries. All rights reserved. Made in China.








