Models Covered:

• PT-REQ12/REQ10/REQ80
• PT-REZ12/REZ10/REZ80

Overall Dimensions and Views

The following dimensions are provided in millimeters [inches] for various views of the Panasonic projector.

Front View (Lens Side)

This view shows the projector from the front, highlighting the lens assembly and ventilation.

• Overall Width: 452 mm [17 13/16 inches]
• Overall Height: 226 mm [8 7/8 inches]
• Depth to Lens Center: 249 mm [9 13/16 inches]
• Lens Diameter: Approximately 102 mm [4 inches]
• Visible features include ventilation slots and mounting points.
• Key dimensions shown: 16 [5/8], 212 [8 3/8], 196 [7 11/16], 226 [8 7/8], 452 [17 13/16].

Side View (Ventilation Side)

This view illustrates the projector's profile from the side, emphasizing the cooling system.

• Overall Height: 538 mm [21 3/16 inches]
• Overall Depth: 498 mm [19 5/8 inches]
• Prominent ventilation grilles are visible.
• Key dimensions shown: 110 [4 5/16], 498 [19 5/8], 538 [21 3/16], 49 [1 15/16].

Top View

This view presents the projector from above, detailing mounting interfaces.

• Overall Width: 234 mm [9 1/4 inches]
• Overall Depth: 355 mm [14 inches]
• Mounting holes are specified as M6x12.
• Key dimensions shown: 105 [4 1/8], 355 [14], 274 [10 13/16], 64 [2 9/16], 82 [3 3/16], 124 [4 7/8], 234 [9 1/4], 280 [11], 396 [15 9/16].
• The top surface has a slightly rounded profile.

Rear View

This view shows the back of the projector, indicating the location of input/output connectors.

• Key dimensions shown: 125 [4 15/16], 248 [9 3/4], 64 [2 9/16], 396 [15 9/16].
• The arrangement of ports is represented by block diagrams.

Input/Output Panel Side View

This view focuses on the side panel containing the projector's connectivity options.

• Key dimensions shown: 102 [4], 90 [3 9/16], 192 [7 9/16].

General Information

Design and specifications are subject to change without notice.

Document Revision: Apr 2023_01