Brightside C28 Wireless Audio Receiver & Transmitter BT 5.0

Specifications

Package Contents

• 1x Brightside C28 Wireless Audio Receiver & Transmitter
• 1x USB-A to micro-USB charging cable
• 1x 3.5 mm jack (m) - 3.5 mm jack (m) stereo plug
• 1x User manual

Product Diagram

Diagram showing the device with labels:

RX (Receiver) TX (Transmitter)

One button control. Switch easily between transmitter (TX) & receiver (RX) mode.

Interface Diagram

Diagram of the device with numbered points:

1. Multifunction button (power/play/pause)
2. Aux input/output
3. Transmitter and receiver switch
4. Microphone
5. Indicator light
6. 5V/1A micro USB charging port

How to use

Transmitter mode

1. Use the micro USB cable to charge before use. When charging the indicator light (6) will illuminate red.
2. Connect the C28 to your audio device using the AUX port (2).
3. Change the switch button (3) to the TX position.
4. Turn on the device (Long press on the multifunction button (1)) then the red light will flash quickly indicating that it is ready to pair.
5. Turn on the device you want to connect and the C28 will automatically connect. When the connection is successful the indicator light (5) will illuminate red.

Receiver mode

1. Use the micro USB cable to charge before use. When charging the indicator light (6) will illuminate red.
2. Connect the C28 to your audio device using the AUX port (2).
3. Change the switch button (3) to the RX position.
4. Turn on the device (Long press on the multifunction button (1)) then the blue light will flash quickly indicating that it is ready for pairing.
5. Find the C28 in the wireless search of your device and chose to pair. When the connection is successful the indicator light (5) will illuminate blue.

Troubleshooting & Support

If you encounter any problems with the installation or if you have any other questions, please feel free to contact Brightside. You can do this directly via their contact page: www.brightsideonline.nl

Special Offer

Get 10% off! With the code: BSO-BTA-10