NKOK Sonic Hover Bike HDT062524TX User Manual

Safety First ?

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USE.

WARNING: CHOKING HAZARD - Contains small parts. Not suitable for children under 3 years of age.

• Adult supervision is required during operation.
• Keep the product away from eyes and ears during use.
• Ensure hair, loose clothing, and pets are kept clear of moving parts.
• Do not operate the hover bike in water or rain.
• Do not attempt to disassemble or modify the product.
• Use only the specified batteries and charging equipment.
• Dispose of batteries responsibly according to local regulations.

Product Overview

This manual provides instructions for the NKOK Sonic Hover Bike, model HDT062524TX. It details the assembly process, operation, charging, and basic troubleshooting.

Assembly Instructions

The assembly process involves attaching the main body shell and rotor assembly to the chassis. Follow these general steps:

1. Chassis Assembly: Attach the left and right side panels to the main chassis using the provided screws (Part A).
2. Body Shell Attachment: Place the main body shell over the assembled chassis, ensuring proper alignment.
3. Rotor Installation: Secure the top rotor assembly onto the designated mounting point on the hover bike's body.

Ensure all parts are securely fastened before proceeding.

Operation Guide

Powering On and Pairing:

• Turn on the remote control.
• Turn on the hover bike.
• Wait for the indicator light on the hover bike to signal a successful connection (e.g., solid light). If pairing fails, power cycle both devices and retry.

Pre-Operation Checks:

• Verify sufficient battery charge for both the hover bike and the remote control.
• Ensure the operating area is clear of obstacles and hazards.
• Hold the remote control firmly for stable control.

Flying the Hover Bike:

• Use the control sticks on the remote to maneuver the hover bike.
• Ascent/Descent: Use the left control stick (forward/backward).
• Directional Control: Use the right control stick (forward/backward for forward/backward movement, left/right for turning).
• Operate in open, spacious environments, away from people, animals, and property.

Charging Instructions

To charge the hover bike:

1. Connect the provided charging cable to the hover bike's charging port.
2. Connect the other end to a suitable power source (e.g., USB adapter, not included).
3. The charging indicator light will show the charging status.
4. Charging is complete when the indicator light changes or turns off.
5. Avoid overcharging the battery.

Troubleshooting

If you encounter issues, consult the following:

• No Power: Check battery installation and charge level. Ensure internal connections are secure.
• No Remote Response: Confirm successful pairing. Check remote control battery.
• Erratic Flight: Inspect rotor assembly for damage or imbalance. Ensure propellers are correctly fitted. Verify operating conditions are suitable.

Compliance Information

This product complies with relevant regulations:

• FCC Statement: Complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference and acceptance of received interference.
• CE Marking: Indicates conformity with European Union directives.