SMART Board 7086 interactive display specifications
SMART Technologies
specssbid7086v2 Was this document helpful? smarttech.com/docfeedback/171598
Specifications
SMART Board® 7086 display with SMART Learning Suite
Model SBID-7086-V2
Overview
The SMART Board® 7086 interactive display combines a premium touch experience with the power of SMART Learning Suite, including SMART Notebook® software.
The 86" 4K ultra-high-definition LED display provides optimal image clarity and wide viewing angles. With the Pen IDTM feature, you can assign different appearances to the four pens and write or draw over any application in digital ink.
Object AwarenessTM allows you to perform mouse functions with your finger, write in digital ink with the pen, and erase with your palm or eraser--all without switching tools or modes. You can use a variety of gestures in applications, and four users can write or draw at the same time.
See education.smarttech.com for more information.
48 5/8" (123.5 cm) 42" (107 cm)
Dimensions and weights1
Dimensions
74 3/4" (189.9 cm)
Weight 201 lb. (91 kg) Shipping dimensions (including pallet) 86 1/2" × 60" × 14" (220 cm × 163 cm × 35.5 cm) Shipping weight 258 lb. (117 kg)
5 5/8" (14.2 cm)
78 3/4" (200.1 cm)
As an ENERGY STAR® certified signage display, the SMART Board 7086 interactive display meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy.
1All dimensions ± 1/8" (0.3 cm). All weights ± 2 lb. (0.9 kg).
smarttech.com/kb/171598 1
SPECIFICATIONS SMART BOARD 7086 DISPLAY WITH SMART LEARNING SUITE MODEL SBID-7086-V2
Hardware
Interaction
Touch technology
HyPr TouchTM (Hybrid Precision Touch) proprietary hybrid system, which greatly improves upon its InGlassTM core by optimizing both touch and pen performance, resulting in virtually no lag and zero contact detect height
Multitouch capabilities Up to 16 simultaneous interaction points (combination of 10 finger touch points, four pen touch points and two eraser touch points)2
Object Awareness
Behavior adjusts automatically to the tool or object you're using, whether it's a pen, finger, eraser, or palm.
Pen ID
Four people can write independently and simultaneously, using different colored ink.
Display
Type
LCD with LED back light
Aspect ratio
16:9
Optimal resolution (HDMI inputs)
4K UHD (3840 × 2160) at 60 Hz
Horizontal frequency 135 kHz (typical)
Vertical frequency (typical)
60 Hz
Contrast ratio (typical) 5000:1
Brightness (maximum) 360 cd/m²
Pixel dimensions
0.429 mm × 0.429 mm
Viewing angle
178°
Response time (typical) 8 ms
100BASE-T Ethernet
Two external ports for a four-port Fast Ethernet switched network connecting the interactive display and the OPS module to an external network and an external device, such as a computer
Wireless
Wi-Fi and Bluetooth® disabled on initial setup and cannot be reenabled
Occupancy sensor
Sensor that reduces startup time and power consumption during inactivity
Audio
10 W integrated speakers (×2)
Noise level
<32 dBA
Included cables and accessories
Country-specific power cable USB cable Pen (×4) Eraser
2Only up to 10 touch points and no pen or eraser support on Chrome OSTM operating system 2 smarttech.com/kb/171598
SPECIFICATIONS SMART BOARD 7086 DISPLAY WITH SMART LEARNING SUITE MODEL SBID-7086-V2
Mounting holes
For a standard VESA 600 mm × 400 mm mounting plate Lower mounting holes 17 1/8" (43.4 cm) from the bottom of the interactive display
Mounting bracket depth Minimum depth of 2" (5.1 cm) for all components on the back of the interactive display for airflow
Connectors
Side
Bottom
Convenience panel
OPS slot (for standard OPS devices) HDMI 2.0 out USB 2.0 Type-A USB 3.0 Type-A "HDMI 1" input connectors
Video/audio: HDMI 2.0 in with HDCP 1.4 and HDCP 2.2 support Touch: USB 3.0 Type-B "HDMI 2" input connectors Video/audio: HDMI 2.0 in with HDCP 1.4 and HDCP 2.2 support Touch: USB 3.0 Type-B
RJ45 (×2) S/PDIF out Stereo 3.5 mm out "VGA" input connectors
Video: VGA in Audio: Stereo 3.5 mm in Touch: USB 3.0 Type-B AC power in AC power out RS-232 in RS-232 out
"HDMI 3" input connectors Video/audio: HDMI 2.0 in with HDCP 1.4 and HDCP 2.2 support Touch: USB 3.0 Type-B
USB 3.0 Type-A (×2)
Installation requirements
Interactive display
See the SMART Board 7000 and 7000 Pro series interactive displays installation and maintenance guide (smarttech.com/kb/171164)
Room computers and guest laptops
General requirements See SMART Notebook software release notes
4K UHD
Video card that can support 3840 × 2160 resolution at 60 Hz and that has 1 GB DDR 5 memory See Minimum requirements for Ultra High Definition or 4K on your interactive flat panel
smarttech.com/kb/171598 3
SPECIFICATIONS SMART BOARD 7086 DISPLAY WITH SMART LEARNING SUITE MODEL SBID-7086-V2
Mini-computers
General requirements See SMART Notebook software release notes
Dimensions
Smaller than 10" × 10" × 2" (25.4 cm × 25.4 cm × 5.1 cm)
Weight
Less than 10 lb. (4.5 kg)
Mounting
VESA 75 mm × 75 mm or 100 mm × 100 mm mounting pattern
Cable requirements
HDMI
Maximum length: 23' (7 m)
NOTES
l Use only certified HDMI cables that have been tested to support the performance standard you require.
l The performance of cables longer than 23' (7 m) is highly dependent on the cable's quality.
USB 2.0 USB 3.0
USB 2.0 certified Hi-Speed (480 Mbps) support Maximum length: 16' (5 m)
USB 3.0 certified SuperSpeed (5 Gbps) support Maximum length: 9' (3 m)
NOTES
l SMART supports only installations that use a 9' (3 m) direct connection or a 16' (5 m) connection that includes an AC-powered active USB extender.
l You might be able to use higher-grade cables that are longer than 9' (3 m). If you have problems with such a cable or an extender of any type, test the connection with a 9' (3 m) or shorter cable before contacting SMART Support.
Important
Using cables that exceed these maximum lengths can produce unexpected results, such as degraded picture quality or USB connectivity. Refer to Installation best practices for SMART products (smarttech.com/kb/171035) for comprehensive information about cables and extensions for SMART hardware products.
Storage and operating requirements
Power requirements
100V to 240V AC, 50 Hz to 60 Hz
Power consumption at 77°F (25°C)
Standby mode
<1 W <2 W with full network capability (wired)
Normal operating
160 W
4 smarttech.com/kb/171598
SPECIFICATIONS SMART BOARD 7086 DISPLAY WITH SMART LEARNING SUITE MODEL SBID-7086-V2
Operating temperature 4195°F (535°C)
Storage temperature -4140°F (-2060°C)
Humidity
580% relative humidity, non-condensing
Certification and compliance
Regulatory certification EU RED and LV Directives, ISED, FCC, cUL, UL, CITIC, EAC, MIC, VCCI, RCM, SIRIM, TRA
Regulatory model
ID7086-2
Environmental compliance
European Union
REACH, RoHS, Battery Directive, Packaging Directive, POP
U.S.
CONEG Packaging, California Prop 65
Purchasing information
Order number SBID-7086-V2
Optional accessories UGK-PCM8 Other
Warranty Extended warranty
EWY1-SBID-7086 EWY2-SBID-7086
SMART Board 7086 display with SMART Learning Suite
SMART OPS PC module (PCM8 series) for SMART Board interactive displays See smarttech.com/accessories Three-year limited equipment warranty
One-year warranty extension Two-year warranty extension
smarttech.com/support smarttech.com/contactsupport
© 2019 SMART Technologies ULC. All rights reserved. SMART Board, SMART Notebook, Pen ID, Object Awareness, HyPr Touch, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by SMART Technologies ULC is under license. All other third-party product and company names may be trademarks of their respective owners. This product and/or use thereof is covered by one or more of the following U.S. patents: www.smarttech.com/patents. Contents are subject to change without notice. November 8, 2019.
smarttech.com/kb/171598 5
madbuild