ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Secop SC10DL Compressor

Model: SC10DL | Sales Code: 104L2525 | Power: 220-240V 50Hz 1~

Single Pack Information

Single pack code number: 195B4041

Position	Title	Code	Amount
1	Compressor SC10DL	104L2525	1
2	Starting relay	117U6005	1
3	Starting capacitor (80µF 220V, 6.3mm)	117U5017	1
4	Cord relief	103N1004	1
5	Cover	103N2009	1
6	Bolt joint for one compressor \| M6 \| ø16mm	118-1917	1

Technical Data - Compressor Design

Model Designation: SC10DL

Compressor Design:

Oil type: Polyolester
Oil viscosity: 32cST
Oil quantity: 550cm³ / 18.6fl.oz
Refrigerant charge - tech. limit: 1300g / 45.9oz
Free gas volume comp.: 1410cm³ / 47.7fl.oz
Weight: 13.2kg / 29.1lbs
Motor protection: 1# internal
Winding resistance main: 5.13Ω (at 25°C)
Winding resistance aux: 13.51Ω (at 25°C)
Max. winding temp.: 125°C / 257°F
Max. discharge temp.: 130°C / 266°F

Refrigerant(s): R404A, R507, R407C

Displacement: 10.29cm³ / 0.63cu.in

Compressors on pallet: 80

Description of Compressor Image: A visual representation of the Secop SC10DL compressor, featuring the Secop S-Series branding.

General Configurations (SC10DL)

Configuration: Conf. 1

Motorconfiguration: CSIR
Power supply (nominal): 220-240V/50Hz
Number of phases: 1
Voltage range: 198-254V
Approvals: CCC, EAC, VDE
Starting torque: HST
Note: -/-

Applications (SC10DL)

Configuration: Conf. 1

Refrigerant: R404A
Application: HBP (High Back Pressure)
System cooling: fan 3m/s
Hot gas defrost: OK
Long interval pull down: OK

Electrical Data (SC10DL)

Configuration: Conf. 1

Starting device type: relay
Run capacitor: -/-
Start capacitor: 80µF
LRA (locked rotor amps / 4s): 16.2A
RLA (rated load amps / 1s): 3.1A
Cut in current: 16.2A

Compressor Dimensions

Housing Dimensions:

A Height: 219mm / 8.62in
B Height: 213mm / 8.39in
C Length shell: 218mm / 8.58in
D Length w. cover: 255mm / 10.04in
E Width: 151mm / 5.94in

Connectors:

	Suction (X)	Discharge (Y)	Process (Z)
Diameter [mm] (i:inside, o:outside) [in]	øi 8.11-8.29 (øi 0.32-0.33)	øi 6.11-6.29 (øi 0.24-0.25)	øi 6.11-6.29 (øi 0.24-0.25)
Material	copper	copper	copper
Horizontal angle	37°	37°	143°
Vertical angle	+2°	30°	150°
Position l/h/w [mm] [in]	107/193/55 (4.2/7.6/2.2)	115/110/63 (4.5/4.3/2.5)	-107/193/55 (-4.2/7.6/2.2)
Straight tube l. [mm] [in]	12 (0.5)	12 (0.5)	12 (0.5)

Description of Dimension Diagram: A diagram illustrating the compressor's housing dimensions labeled A through E, and connector positions X, Y, Z with their respective angles and dimensions. It also shows the vertical and horizontal angles for connectors.

Compressor Fixation

Description of Compressor Fixation Diagram: This diagram details the baseplate dimensions (Bl, Bw, ØE) and hole sizes (Large holes: Ll, Lw, ØL; Small holes: Sl, Sw, ØS, Ql, Qw) for compressor mounting. It includes measurements in both millimeters and inches.

Baseplate Dimensions:

	[mm]	[inch]
Bl	204	8.03
Bw	150	5.9
ØE	Ø 9.7	Ø 0.38

Large Holes:

	[mm]	[inch]
Ll	165	6.5
Lw	101.6	4
ØL	Ø 19	Ø 0.75

Small Holes:

	[mm]	[inch]
Sl	170	6.7
Sw	70	2.76
ØS	Ø 16	Ø 0.63
Ql	127	5
Qw	127	5

Mounting Accessories:

Accessory Type	Part Number (one comp.)	Part Number (multi pack)
Bolt joint \| M6 \| Ø16mm	118-1917	118-1918
Bolt joint \| Ø1/4" \| Ø16mm	118-1946	118-1949
Bolt joint \| Ø1/4" \| Ø19mm	118-1947	118-1919
Snap-on \| Ø7.3 \| Ø16mm

Description of Bolt Joint Diagram: Illustrates a bolt joint assembly including a bolt, washer, nut, compressor base, cabinet base, and rubber grommet.

Description of Snap-on Diagram: Shows a snap-on fastener assembly with a compressor base, clip, steel pin, cabinet base, and rubber grommet.

Application notes: Provision for PE Grounding is located at the PE Stamp on the compressor.

Operation and Limits

Configuration: Conf. 1

Motorconfiguration: CSIR
Power supply (nominal): 220-240V/50Hz 1~
Refrigerant: R404A
Application: HBP
Voltage range: 198-254V
Starting torque: HST
Approvals: CCC, EAC, VDE

Ambient/Machine Room Temperatures

Ambient temperature range: 10 - 38°C / 50 - 101°F
Machine room temperature range: 10 - 43°C / 50 - 110°F
Compressor cooling: fan 3m/s

Operation Pressure Range Graph

Description of Operation Pressure Range Graph: This graph plots condensing pressure (saturation temperature) against evaporation pressure (saturation temperature). The Y-axis represents condensing pressure in bar (from 0 to 80) and temperature (°C/°F from -50°C/-58°F to 102°F/22°C). The X-axis represents evaporation pressure in bar (from 0 to 22) and temperature (°C/°F from -30°C/-38°F to 102°F/42°C). Two lines indicate 'continuous operation' and 'transitory operation'.

Electrical Accessories / Wiring Diagram

Description of Electrical Accessories/Wiring Diagram: A schematic showing the electrical connections for the CSIR motor configuration. It labels components such as a relay (a2), start capacitor (c), cord relief (d), and plastic cover (b), along with terminals (10, 11, 12, 13, 14) and windings (main, start, winding protector).

Performance Data

Conditions: R404A, 220V/50Hz, CSIR, fan 3m/s, CCC, EAC, VDE

Optimization + Standard Conditions

pe [°C] [°F]	pc [°C] [°F]	RGT [°C] [°F]	Tliq [°C] [°F]	Cooling capacity			COP		EER		P1 [W]	Current consumption		Ref. mass flow [kg/h]	Application
pe [°C] [°F]	pc [°C] [°F]	RGT [°C] [°F]	Tliq [°C] [°F]	[W]	[Btu/h]	[kcal/h]	[W/W]	[Btu/Wh]	[kcal/Wh]	[A]	P1 [W]			Ref. mass flow [kg/h]	Application
7.2 / 45	54 / 130	35 / 95	46 / 115	1478.2	5048	1272.2	2.15	7.35	1.85	686.7	3.80	42.03	ASHRAE HBP
5 / 41	55 / 131	32 / 90	55 / 131	1156.0	3948	994.8	1.71	5.85	1.47	674.9	3.74	38.50	cecomaf HBP
5 / 41	50 / 122	20 / 68	50 / 122	1208.0	4126	1039.6	1.92	6.56	1.65	628.6	3.57	41.20	EN12900 HBP
-7 / 20	54 / 130	35 / 95	46 / 115	838.2	2862	721.3	1.51	5.16	1.30	554.9	3.27	23.06	ASHRAE MBP
-10 / 14	55 / 131	32 / 90	55 / 131	613.6	2096	528.1	1.19	4.05	1.02	517.8	3.12	19.64	cecomaf MBP
-10 / 14	45 / 113	20 / 68	45 / 113	730.5	2495	628.7	1.53	5.21	1.31	478.5	2.97	22.00	EN12900 MBP

Performance Tables

pe [°C] [°F]	pc [°C] [°F]	Cooling capacity			COP		EER		P1 [W]	Current consumption	m [kg/h]
pe [°C] [°F]	pc [°C] [°F]	[W]	[Btu/h]	[kcal/h]	[W/W]	[Btu/Wh]	[kcal/Wh]	[A]	P1 [W]		m [kg/h]
-20 / -4	45 / 113	471.3	1610	405.6	1.26	4.31	1.09	373.4	2.55	12.79
-15 / 5	610.8	2086	525.7	1.42	4.86	1.23	428.9	2.78	16.69
-10 / 14	775.2	2648	667.2	1.62	5.53	1.39	478.5	2.97	21.35
-5 / 23	967.8	3305	832.9	1.85	6.33	1.60	522.0	3.15	26.91
0 / 32	1191.8	4070	1025.6	2.13	7.28	1.83	559.2	3.30	33.50
5 / 41	1450.4	4953	1248.2	2.46	8.40	2.12	589.9	3.42	41.32
15 / 59	2084.9	7120	1794.3	3.30	11.28	2.84	631.1	3.61	61.48
-20 / -4	349.8	1195	301.0	0.92	3.15	0.79	378.8	2.59	11.01
-15 / 5	474.1	1619	408.0	1.05	3.59	0.90	451.6	2.87	15.04
-10 / 14	613.6	2096	528.1	1.19	4.05	1.02	517.8	3.12	19.64
-5 / 23	771.6	2635	664.0	1.34	4.57	1.15	577.2	3.35	24.97
0 / 32	951.2	3249	818.7	1.51	5.16	1.30	629.6	3.56	31.19
5 / 41	1156.0	3948	994.8	1.71	5.85	1.47	674.9	3.74	38.50
15 / 59	1653.5	5647	1423.0	2.22	7.60	1.91	743.4	4.04	57.34

SC Compressors - Service/Repair Information

This section provides service and repair information, specifically mentioning R290 refrigerant.

Description of R290 Warning Symbol: A triangular warning symbol with a flame icon inside, indicating the presence of flammable refrigerant R290.

Description of Repair Icons: One icon shows a crossed-out connection, indicating an incorrect procedure. Another icon shows a correct connection with a checkmark, indicating the approved method.

For detailed service and repair procedures, refer to specific Secop documentation.

Google Docs
Google Drive
Download [pdf]
File Info : application/pdf, 7 Pages, 918.80KB
Document Document

single-pack-195B4041 GPL Ghostscript 10.05.1

Related Documents

	Secop SC10DL Compressor Technical Data, Specifications, and Service Information Comprehensive technical data, specifications, dimensions, performance tables, wiring diagrams, and service information for the Secop SC10DL compressor, designed for 220-240V/50Hz operation. Includes single pack component details and operational limits.
	Secop SC15/15CL Twin-Compressor Technical Data and Specifications Comprehensive technical data, specifications, dimensions, electrical diagrams, and performance tables for the Secop SC15/15CL Twin-Compressor (220-240V 50Hz). Includes single pack components, compressor design details, electrical configurations, and performance metrics.
	Secop KLF5.6CND Compressor Technical Data and Specifications Comprehensive technical specifications, dimensions, performance data, configuration details, and service information for the Secop KLF5.6CND compressor, designed for 220-240V, 50Hz operation with R290 refrigerant.
	Secop SC15DL Compressor: Technical Data, Specifications, and Performance Comprehensive technical data sheet for the Secop SC15DL compressor, detailing specifications, dimensions, electrical data, operating limits, and performance tables for R404A and R407C refrigerants. Includes configuration details and service notes.
	Secop NL11F Standard Compressor R134a Technical Specifications and Parts Comprehensive technical datasheet for the Secop NL11F Standard Compressor (R134a, 220-240V 50Hz CSIR). Includes general specifications, cooling requirements, motor and design details, performance tables (EN 12900, ASHRAE), accessories, mounting information, and service/repair guidelines.
	Secop NL9CLX Compressor Technical Data and Specifications Detailed technical specifications, performance data, dimensions, and electrical information for the Secop NL9CLX compressor, designed for 220-240V, 50Hz operation.
	SECOP KLF7.7CND Compressor Technical Data Sheet Detailed technical specifications, performance data, and configuration information for the SECOP KLF7.7CND compressor, designed for R290 refrigerant and 220-240V/50Hz power supply. Includes dimensions, electrical data, and operational parameters.
	Secop NL7CN Compressor: Technical Specifications, Datasheet, and Performance Data Detailed technical specifications, performance data, accessories, and service information for the Secop NL7CN LBP/MBP R290 compressor (220-240V 50Hz). Includes EN 12900 and ASHRAE LBP ratings.