DK2 5x7 Trailer Spare Tire Kit Installation Guide

Step 1: Insert the U-Bolt from the Inside Out

Insert the U-bolt through the trailer frame from the interior side, ensuring the threaded ends point outwards.

Document version: v.210910

Step 2: Fasten the U-Bolt to the Trailer

Secure the U-bolt to the trailer frame using the provided hardware (nuts, washers), ensuring it is firmly attached.

Step 3: Set the Distance from the Trailer

Adjust the position of the U-bolt assembly on the trailer frame to achieve the correct spacing required for mounting the spare tire.

Document version: v.210910

Step 4: Slide the Wheel onto the U-Bolt

Place the spare trailer wheel onto the installed and positioned U-bolt, aligning the wheel's center hole with the U-bolt.

Step 5: Fasten the Wheel with Remaining Hardware

Secure the wheel to the U-bolt using the remaining hardware provided in the kit. This typically includes nuts, washers, and possibly a mounting plate, to ensure the wheel is held firmly in place.

Document version: v.210910