Declaration of Conformity

Version 3.0

Product Information

Product: DJI Flip

Model Number: DF1A0424

UAS Class: C0

Manufacturer's Name: SZ DJI TECHNOLOGY CO., LTD.

Manufacturer's Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China.

Declaration Statement

We, SZ DJI TECHNOLOGY CO., LTD. declare under our sole responsibility that the above referenced product is in conformity with the applicable requirements of the following directives:

RED Directive	2014/53/EU
RoHS Recast Directive	2011/65/EU, (EU) 2015/863
WEEE Directive	2012/19/EU
REACH Regulation	(EC) No 1907/2006
Battery Directive	(EU) 2023/1542
UAS Delegated Regulation	(EU) 2019/945 amended by (EU) 2020/1058

Conformity Assessment

Conformity with these directives has been assessed for the product by demonstrating compliance to the following technical standards and/or regulations:

Area	Standard/Regulation
Radio Spectrum	EN 300 328 V2.2.2; EN 303 413 V1.2.1; EN 300 440 V2.2.1; EN 301 893 V2.1.1
Safety	EN 62368-1:2020+A11:2020
Health	EN 62479:2010; EN IEC 62311:2020
EMC	EN 55032: 2015+A11:2020; EN 55035: 2017+A11:2020; EN 301 489-1 V2.2.3; EN 301 489-3 V2.3.2; EN 301 489-17 V3.3.1; EN 301 489-19 V2.2.1; EN IEC 61000-3-2:2019; EN61000-3-3:2013+A1:2019
RoHS	2011/65/EU; (EU) 2015/863; EN IEC 63000:2018
WEEE	2012/19/EU
REACH	(EC) No 1907/2006
Battery	(EU) 2023/1542
UAS Safety	prEN 4709-001: 2021, 2006/42/EC Annex I, EN ISO 12100:2010

Notified Bodies

The notified body, LGAI TECHNOLOGICAL CENTER, S.A / Applus+, notified body number: 0370, performed the EU-type examination in according to Module B of the DELEGATED REGULATION (EU) 2019/945 amended by DELEGATED REGULATION (EU) 2020/1058, and issued the EU-type examination certificate.

The notified body, SGS North America Inc., notified body number: 2906, performed the EU-type examination in according with Annex III, Module B of Council Directive 2014/53/EU, and issued the EU-type examination certificate.

Signature

Signed for and on behalf of: SZ DJI TECHNOLOGY CO., LTD.

Place: Shenzhen, China

Name: Gary Zeng

Date: 2025-06-18

Position: Certification manager

Annex 1: Components and Firmware/Software versions

Item	Model Number	Software*
DJI Flip	DF1A0424	V01.00.0905
DJI RC-N3	RC151	V01.02.0019
DJI RC 2	RC331	V03.00.00.74
Intelligent Flight Battery	BWX141-3110-7.16	/
DJI Flip PARALLEL CHARGING HUB	CHX141-65	/
Type C to C cable	/	/
RC Cable	/	/

*Note: Updated software may be released by manufacturer to fix bugs and improve the performance after the product placed on the market. All updated versions released by the manufacturer will be verified to be complied with the applicable regulations, this declaration will be updated if new firmware/software has influence on compliance. All RF parameters (e.g., RF power, channel numbers) are not accessible to end users and cannot be changed by any third parties.

[CE Mark]

	DJI Neo Declaration of Conformity and Component List Official Declaration of Conformity for the DJI Neo drone (Model DN1A0626) by SZ DJI TECHNOLOGY CO., LTD., detailing EU directive compliance and listing key components and their software versions.
	DJI Matrice 4TD EU Declaration of Conformity This document provides the EU Declaration of Conformity for the DJI Matrice 4TD, detailing its compliance with various EU directives and technical standards.
	DJI M30T RTK EU Release Notes and Declaration of Conformity This document contains the release notes and declaration of conformity for the DJI M30T RTK EU drone. It details product specifications, compliance with EU directives, and technical standards.
	DJI RC PLUS 2 Declaration of Conformity Official Declaration of Conformity for the DJI RC PLUS 2 (Model TKPL2) from SZ DJI TECHNOLOGY CO., LTD., confirming compliance with EU directives and technical standards.
	DJI RC Pro 2 Declaration of Conformity This document contains the Declaration of Conformity for the DJI RC Pro 2, model RC520, issued by SZ DJI TECHNOLOGY CO., LTD. It details compliance with various EU directives and technical standards.
	DJI RC PRO 2 Declaration of Conformity Declaration of Conformity for the DJI RC PRO 2 (Model RC520) from SZ DJI TECHNOLOGY CO., LTD., detailing compliance with RED, RoHS, WEEE, REACH, and Battery directives, and relevant technical standards.
	DJI Mavic 3M EU Release Notes and Declaration of Conformity This document contains release notes and the EU Declaration of Conformity for the DJI Mavic 3M EU drone. It details product specifications, compliance with EU directives, and technical standards. Includes information on software versions and components.
	DJI Goggles 3 Declaration of Conformity Declaration of Conformity for DJI Goggles 3 (Model: TKGS3) by SZ DJI TECHNOLOGY CO., LTD., detailing compliance with RED, RoHS, WEEE, and REACH directives, and harmonized standards.