Instruction Manual for SATECHI models including: 200W GaN USB Charger with Ports, 200W, GaN USB Charger with Ports, USB Charger with Ports, Charger with Ports, Ports
SATECHI GaN 200W USB-C Charger with 6 Ports - 2X USB-C PD 3.1 (140W) and 4X USB-C PD 3.0, Fast Charging Travel Station Compatible with Apple and Most Thunderbolt USB-C Devices: Computers & Accessories
QUICK GUIDE 200W USB-C 6-PORT PD GAN CHARGER 1 2 Connect the included C5 power cable to the C5 connector on the rear of the charger. Plug the power cable directly to a power outlet. 3 4 PD1 PD2 PD3 PD4 PD5 PD6 PD1 PD2 PD3 PD4 PD5 PD6 The LED Indicator light will Illuminate white when receiving power. The 200W charger can be laid flat horizontally on the supported rubber feet or vertically using the included Desktop Stand. 5 6 PD1 PD2 PD3 PD4 PD5 PD6 PD1 PD2 PD3 PD4 PD5 PD6 Plug in cables (sold separately) to the charger's USB-C PD ports. We always recommend using certified charging cables. EMARK cables are required to reach wattage above 60W. Connect and charge up to six USB-C devices simultaneously Total max output: 200W. When connecting devices to all six PD ports, connect your largest device to the PD1 port. Standard operating temperature 150°F / 65°C CHARGING 7 MAX 140W PD1 PD1 MagSafe 3 PD2 PD2 PD3 PD3 When connected to PD1 or PD2, supported device can charge with a max output of 140W. Only one device can be connected at a time to either port in order to achieve 140W charging. USB-C to MagSafe 3 Cable must be used in order to achieve 140W output through PD1 or PD2. 8 PD2 PD2 PD3 PD3 MAX PD4 100W PD4 PD5 PD5 When connected to PD3 or PD4, supported device can charge with a max output of 100W. 9 PD4 PD4 PD5 PD5 MAX PD6 20W PD6 When connected to PD5 or PD6, supported device can charge with a max output of 20W. Please refer to the Power Schematic in the user manual for actual power outputs, depending on the number of connected devicesAdobe PDF library 17.00 Adobe Illustrator 27.3 (Windows)