EUFAB Wheel Stopper for Wide Tires - Operating Instructions

1. Proper Use of the Product

The EUFAB wheel stopper set is designed to secure bicycles with tires up to 3.25 inches wide onto bicycle racks. This set replaces the standard wheel stoppers found on EUFAB bicycle racks such as PREMIUM 2 (Art. No. 11521), PREMIUM 2+ (Art. No. 11523), and PREMIUM 3 (Art. No. 11522).

This device is not intended for use by children or individuals with limited mental capabilities or lacking the necessary experience and knowledge. Children should be kept away from the device. The device is not intended for commercial use.

Proper use includes adhering to all information provided in this manual, especially the safety instructions. Any other use is considered improper and may lead to material damage or personal injury. EAL GmbH is not liable for damages resulting from improper use.

2. Scope of Supply

• 1 x Pair of wheel stoppers with rim protector rubber
• 1 x Operating instructions

3. Specifications

• Dimensions (L x W x H): Approx. 17 x 12.5 x 14 cm
• Weight (pair): Approx. 0.360 kg
• Maximum tire width: 3.25 inches

Suitable for EUFAB Bicycle Racks:

• PREMIUM 2, Art. No. 11521
• PREMIUM 2+, Art. No. 11523
• PREMIUM 3, Art. No. 11522

4. Safety Precautions

WARNING! Please read the operating instructions carefully before use and observe all safety instructions! Failure to do so may result in personal injury, damage to the device, or your property!

Store the original packaging, receipt, and these instructions for future reference. When passing on the product, include these operating instructions as well. Before use, check the package contents for completeness and undamaged condition.

! The warning triangle indicates all safety-relevant instructions. Always follow them to avoid personal injury or damage to the device.

• Children must not play with the device.
• Cleaning and user maintenance must not be carried out by children without supervision.
• Do not carelessly leave packaging material lying around, as it can become a dangerous plaything for children!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, use only accessories or spare parts specified in these instructions or recommended by the manufacturer!
• Observe the safety instructions of your bicycle rack.

5. Operating Instructions

5.1 Overview

1. Knurled nut
2. Link screw
3. Guiding ridge
4. Turnbuckle
5. Unlocking lever
6. Tensioning belt
7. Rim protector

[Image 1: Overview showing the components of the wheel stopper]

5.2 Preparation

Before using the wheel stopper set, remove the standard wheel stoppers from your bicycle rack. Follow these steps:

• Remove bicycles from the bicycle rack.
• Release the knurled nut from the standard wheel stopper.
• Push the wheel stopper towards the inner end of the wheel rail and use it to push the end cap out of the wheel rail.
• Pull the wheel stopper out of the wheel rail.

5.3 Mounting the Wheel Stoppers

For the new wide tire wheel stoppers, the center of the bicycle tire is offset by approximately 1 cm towards the center of the wheel rail. Insert the new wheel stopper with the guiding ridge (Position 3 in the overview) into the wheel rail so that the bicycle tire is positioned away from the carry handle. See Figure 2.

Mount the wheel stopper for the other half of the wheel rail accordingly. Replace the end caps.

[Image 2: Diagram showing the offset of the wheel stopper]

If you wish to use a wide tire wheel stopper set on another rail of the bicycle rack, it must be mounted accordingly. This means the wheel stoppers must be mounted so that the bicycle wheel is fastened away from the carry handle.

CAUTION The wheel stoppers must always be located between the wheels of the bicycle, never in front of or behind them.

5.4 Fastening the Tires

Press the unlocking lever (Position 5 in the Overview) upwards, Figure 3. You can now pull the tensioning belt (Position 6 in the overview) from the turnbuckle (Position 4 in the overview). Place the bicycle on the bicycle rack and fasten it with the frame holder according to your bicycle rack's instructions. Push the wheel stoppers up to the bicycle tires and tighten the knurled nuts.

Place the tensioning belt around the bicycle's rim and insert the tensioning belt into the turnbuckle. Position the rim protector (Position 7 in the overview) so that the tensioning belt cannot damage the rim through friction during transport, Figure 4. The tensioning belt can be tightened by pulling the turnbuckle upwards several times.

[Image 3: Illustration showing how to release the tensioning belt]

[Image 4: Illustration showing the rim protector in place]

6. Maintenance and Care

When used as directed, the wheel stopper requires no maintenance. Clean the wheel stopper only with a soft, dry cloth. Do not use aggressive cleaning agents or those containing solvents. For heavy soiling, use a brush and water to clean the teeth of the tensioning belt to ensure the flawless functioning of the turnbuckle.

7. Notes Regarding Environmental Protection

Please dispose of the wheel stoppers via the recycling bin or public/municipal collection points. The materials are recyclable. By recycling, material recovery, or other forms of reuse of used equipment, you make an important contribution to protecting our environment!

8. Contact Information

EAL GmbH

Otto-Hausmann-Ring 107

42115 Wuppertal, Germany

Tel: +49 (0)202 42 92 83 0

Fax: +49 (0) 202 42 92 83 – 160

Email: info@eal-vertrieb.com

Website: www.eal-vertrieb.com