Style Selections PLL102PNK Pendant Light Fixture

Product Information

Thank you for purchasing this Style Selections product. These easy-to-follow instructions are designed to help you enjoy the product quickly. For more information, visit Lowes.com, search the item number, and refer to the Guides & Documents tab on the product's page.

Note: Refer to the full manual online for complete safety information, care instructions, troubleshooting, and warranty details.

For questions or issues, contact customer service at 1-877-888-8225, Monday-Thursday 8 a.m. - 6 p.m. EST, Friday 8 a.m. - 5 p.m. EST.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electrical shock, fire, or other fatal injuries.

DANGER

• Do not connect this fixture to an electrical system that does not provide equipment grounding. Never use a fixture in a two-wire system without grounding. Improper grounding can cause serious injury or death.
• Do not connect the bare or green fixture ground wire to the black (HOT) wire or the white neutral house wire. Connecting the ground wire to these wires could cause serious injury or death.
• Do not damage or cut wire insulation during installation. Do not let wires contact sharp edges, as this could cause serious injury or death.

WARNING

• To avoid personal injury, gloves may be necessary when handling fixture parts with sharp edges.
• All electrical connections must comply with local codes, the National Electric Code (NEC), and ANSI/NFPA 70-1999. Contact your municipal building department for local codes, permits, and inspections.
• Risk of fire: Dwellings built before 1985 may have supply wires rated for 140°F (60°C). Consult a qualified electrician before installation.
• Do not suspend any fixture by the house wires. Fixtures must be mounted directly to an outlet box or a mounting plate attached to the outlet box. Suspending by house wires could cause the fixture to fall, leading to injury, shock, or fire.
• To reduce the risk of fire, electrical shock, or personal injury, wire connectors are designed for one 12-gauge house wire and two fixture lead wires. If your house wire is larger than 12-gauge or there are multiple house wires, consult an electrician.
• Modifications not approved by the party responsible for compliance may void the user's authority to operate the equipment.

CAUTION

• Turn off electricity at the circuit breaker box before beginning installation.
• If you are unsure if the lighting system has a grounding means, do not attempt installation. Contact a qualified, licensed electrician for proper grounding methods.
• All fixtures must be mounted to an outlet box supported by the building structure.
• If using a dimmer control switch, consult a professional to determine the correct type and electrical rating.
• Total wattage for this fixture is 7 watts. Do not tamper with or attempt to repair the LED component.
• Note: Dimmable to 10% with select dimmers. See Lowes.com for more information.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Installation Instructions

Preparation: Before assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not assemble if parts are missing or damaged.

Estimated Assembly Time: 45 minutes

Tools Required: [Screwdriver], [Wire Stripper]

Package Contents:

• A: Cord Restraint / Plastic Piece (preassembled) x 1
• B: Mounting Strap (preassembled) x 2
• C: Fixture Body x 1

Hardware Contents:

• AA: Screws x 3
• BB: Wire Nuts x 2

Installation Overview:

Step 1: Prepare Power

Action: Turn off the power source at the circuit breaker. [Power Off]

Note: Save part C for later use.

Step 2: Mount the Fixture Strap

Action: Secure the mounting strap (B) to the outlet box using screws (AA). Ensure the outlet box can support 35 lbs. (15.88 kg) of hanging weight.

Diagram Description: Shows mounting strap (B) attached to an outlet box with screws (AA). A washer (BB) is also shown.

Step 3: Adjust Cord Length (Optional)

Action: If needed, loosen the plastic piece and cord restraint (part of A) on the fixture's cord. Pull the cord through the canopy of the fixture (C) to adjust the length. Tighten the cord restraint to secure the cord at the desired length.

Diagram Description: Illustrates loosening a plastic piece and cord restraint, pulling the cord through the canopy, and tightening the restraint.

Step 4: Connect Wiring

Action: Connect the wires:

• Bare/Green ground wire from the mounting strap (B) to the fixture's green or bare ground wire.
• White fixture wire to the house's white (neutral) wire.
• Black fixture wire to the house's black (hot) wire.

Use the provided wire nuts (BB) for connections. Ensure no bare wire or wire strands are visible after connections are made.

Diagram Description: Shows wiring connections: ground to ground, white to white, black to black, using wire nuts. It also shows a "STOP" symbol for turning off power and a "0" symbol for off.

Note: Consult an electrician if house wiring differs.

Step 5: Attach Fixture Canopy

Action: Carefully attach the fixture canopy (part of C) to the mounting strap (B) and secure it. Ensure the fixture is properly aligned and flush against the ceiling or mounting surface.

Diagram Description: Shows the fixture canopy being attached to the mounting strap.

Step 6: Restore Power

Action: Turn on the power source at the circuit breaker. [Power On]