DIGITAL WATCHDOG DWC-V7JUNCW Junction Box For Vandal Dome Cameras User Guide

Quick Start Guide

10 hours ago — Quick Start Guide. Tel: 1 (866) 446-3595 / (813) 888-9555. Technical Support ... and quick start guide (QSGs) will appear in the results. WHAT'S IN THE BOX.

All supported materials, including manuals and quick start guide (QSGs) will appear in the results. WHAT'S IN THE BOX. V7 Camera Mounting Screws. (M3.0x8mm). 2.

22 ore fa — Quick Start Guide. Tel: 1 (866) 446-3595 / (813) 888-9555. Technical Support ... and quick start guide (QSGs) will appear in the results. WHAT'S IN THE BOX.

Original Document

If the viewer doesn’t load, open the PDF directly.

Extracted Text

Quick Start Guide

Junction box for vandal dome cameras

DWC-V7JUNCW

DWC-V7JUNC

WHAT'S IN THE BOX

V7 Camera Mounting Screws (M3.0x8mm)

2 Mounting Template

1

Screws and Plastic Anchors

4 Quick Setup Guide

1

DA Camera Mounting Screws (M3.0x10mm)

2

NOTE: Download all your support materials and tools in one place. 1. Go to: http://www.digital-watchdog.com/resources 2. Search your product by entering the part number in the `Search by Product' search bar. Results for applicable part numbers will populate automatically based on the part number you enter. 3. Click `Search'. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.
Tel: +1 (866) 446-3595 / (813) 888-9555 Technical Support Hours: 9:00AM � 8:00PM EST, Monday through Friday

digital-watchdog.com

Quick Start Guide
INSTALLATION
1 Using the mounting template or the junction box itself, mark and drill the necessary holes on the mounting surface. 2 Secure the junction box to the mounting surface using the screws and anchors included. 3 To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included
with the camera. NOTE: Do not touch the lens when handling the camera.
4 Pass wires through and make all necessary connections. 5 Secure the camera to the mounting bracket using the included mounting screws. 6 Adjust the camera's lens position and angle, then place the cover dome over the camera lens and affix the cover to the
bracket with the original dome housing's screws.
Junction box

Camera module Camera dome cover
Rev Date: 01/24

Copyright � Digital Watchdog. All rights reserved. Specifications and pricing are subject to change without notice.