VALUE PCIe GbE SFP Network Adapter

Model: 15.99.2188

Version: 1.00

Chapter 1: Introduction

1.1 Product Introduction

This PCIe 1G SFP Network Adapter is a cost-effective solution that delivers fast and reliable 1 Gbps network access at longer distances. Using the SFP transceiver of your choice, you can connect your PCI Express-based server or workstation directly to your 1G fiber optic network.

1.2 Features

Supports common 1G SFP optical and Direct Attached Copper modules
Supports EEE (Energy Efficient Ethernet)
Up to 9.5K Jumbo Frames
IP, TCP and UPD checksum offloading (IPv4, IPv6) capabilities
Designed to meet PCI Express Specification Revision 2.1
One lane (x1) PCI Express compatible with x4, x8 and x16 PCIExpress slots
IEEE 802.1Q Tagged VLAN
Supports Preboot eXecution Environment (PXE)

1.3 Requirements

Hardware

The following system specifications are recommended as minimum:

PCIe slot: 1-Lane PCI-Express slot Gen 2.0 or later
Processor: Quad Core 3.0GHz or higher
RAM: 4GB memory or higher

Software

32- and 64-bit operating systems are supported

Windows 7/8.x/10/11
Windows Server 2008 R2/2012 R2/2016/2019/2022

1.4 Package Contents

1 x PCIe 1-Port Gigabit SFP Network Adapter
1 x User Manual

Chapter 2: Getting Started

2.1 Hardware Layout

The adapter features a Link/Act status indicator and an SFP port.

Link/Activity Indicator:

LED	Description
Link Speed LED	Solid Green = 1000Mbps
Link /Activity LED	Solid Green = Network port is connected Flashing Green = Network port is active

2.2 Hardware Installation

Turn off your computer.
Unplug the power cord and remove your computer's cover.
Remove the slot bracket from an available PCIe slot.
To install the card, carefully align the card's bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
Replace the slot bracket's holding screw to secure the card.
Secure the computer cover and reconnect the power cord.

2.3 Driver Installation

You can download the driver from www.secomp-international.com.

2.4 Verifying the installation

1. Click on the "Device Manager" tab in the Windows Control Panel.

Navigate via: Start > Control Panel > Device Manager.

The Device Manager window displays system settings and driver software. Look for the "Network adapters" section.

2. Expand the "Network adapters" item. You should see entries like "Intel(R) I210 Gigabit Fiber Network Connection" listed.

	VALUE USB 3.2 Gen 1 to Gigabit Ethernet Converter (12.99.1105) - User Manual Comprehensive user manual for the VALUE USB 3.2 Gen 1 to Gigabit Ethernet Converter, model 12.99.1105. Learn about its features, technical specifications, package contents, and step-by-step connection and operation instructions for seamless network connectivity.
	VALUE USB 3.2 Gen 2 Typ A zu 5-Gigabit-Ethernet Konverter - Technische Daten Technische Daten und Spezifikationen für den VALUE USB 3.2 Gen 2 Typ A zu 5-Gigabit-Ethernet Konverter (Artikelnummer 12.99.1127). Ermöglicht den Anschluss von PCs und Notebooks an Netzwerke mit bis zu 5 Gbit/s über USB-A.
	VALUE USB 3.2 Gen 2 Type C to Gigabit Ethernet Converter Cable - 5m Connect your PC or notebook to a Gigabit Ethernet network with the VALUE USB 3.2 Gen 2 Type C to Gigabit Ethernet Converter Cable. Features USB 3.2 Gen 2 support, easy plug-and-play installation, and 10/100/1000 Mbps speeds.
	VALUE USB 3.2 Gen 2 Type-C to Gigabit Ethernet Converter Cable, 1.5m, Black Connect your PC or notebook with USB 3.1/3.2 Gen 2 Type-C to a Gigabit Ethernet network using the VALUE USB 3.2 Gen 2 Type-C to Gigabit Ethernet converter cable. Features high-speed connectivity, easy plug-and-play installation, and broad OS support.
	VALUE USB 3.2 Gen 2 Type C to 5 Gigabit Ethernet Converter Connect your PC or notebook with USB Type C to a network with up to 5 Gigabit Ethernet using the VALUE USB 3.2 Gen 2 Type C to 5 Gigabit Ethernet Converter. Supports USB 3.2 Gen 2 and is backwards compatible with older USB versions. Features easy plug-and-play installation and bus power, requiring no external power supply.
	VALUE USB 3.2 Gen 2 Type C to Gigabit Ethernet Converter Cable, 1 m Connect your PC or notebook with a USB 3.1 / USB 3.2 Gen 2 Type C interface to a Gigabit Ethernet network using this VALUE converter cable. Features auto-sensing, MDI/MDIX, half/full-duplex, and powered via USB. Supports Windows and Mac OS X.
	Value USB 3.2 Gen 2 Type A to 5-Gigabit Ethernet Converter Connect your PC or notebook with USB Type A to a network with up to 5-Gigabit Ethernet using this Value USB 3.2 Gen 2 Type A to 5-Gigabit Ethernet Converter. Supports USB 3.2 Gen2 and is backward compatible with USB 3.2 Gen2 and USB 2.0. Features easy installation, bus-powered operation, and a USB Type-A connector.
	VALUE USB 3.2 Gen 2 Typ C zu Gigabit Ethernet Konverterkabel, schwarz, 3m VALUE USB 3.2 Gen 2 Typ C auf Gigabit Ethernet Konverterkabel (3m, schwarz) für schnelle Netzwerkverbindungen. Unterstützt USB 3.1/3.0/2.0 und Gigabit Ethernet. Einfache Installation für PCs und Notebooks.