SENA
SENA
SENA
User Guide for SENA models including: 2.4.2, Plus MESH Bluetooth to Mesh Intercom Adapter, Plus MESH, Bluetooth to Mesh Intercom Adapter, to Mesh Intercom Adapter, Mesh Intercom Adapter, Intercom Adapter, Adapter
MESH - SENA
Attach the mounting cradle on the back of the main unit along the guide rail until you hear a click. Note: Make sure that the main unit sticks on your.
File Info : application/pdf, 17 Pages, 176.16KB
DocumentDocument+MESH
BLUETOOTH TO MESH INTERCOM ADAPTER
QUICK START GUIDE
2.4.2
ENGLISH
RIDE CONNECTED
The +Mesh features Sena's Mesh Intercom technology allowing your group to seamlessly communicate, even if a rider falls out of range. Pair your headset or helmet from Sena to the +Mesh to start talking with other riders using Mesh Intercom. With built-in Bluetooth®, HD IntercomTM, technology has never felt so minimal or freeing.
Mesh IntercomTM 800 meters/880 yards*
Bluetooth® 5.0
* in open terrain
2
GETTING STARTED
1. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit sena.com to see how to update your product.
2. Users can follow Sena on Facebook, YouTube, Twitter and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products.
Sena Technologies Co., Ltd. Customer Support: support.sena.com
3
TABLE OF CONTENTS
1. ABOUT THE +MESH
6
1.1 Product Details
6
1.2 Package Contents
6
1.3 Installing the +Mesh
7
1.3.1 Using the Handlebar Mounting Kit
7
1.3.2 Placing on the Mounting Cradle
7
2. BASIC OPERATION
8
2.1 Downloadable Sena Software
8
2.1.1 Sena +Mesh App
8
2.1.2 Running the Sena +Mesh App
8
2.1.3 Sena Device Manager
9
2.2 Powering On and Off
9
2.3 Charging
9
2.4 Checking the Battery Level
9
3. MESH INTERCOM
10
3.1 What is Mesh Intercom
10
3.2 SENA Products That Can Communicate with
+Mesh via Mesh Intercom
11
4
3.3 Using the Mesh
11
3.3.1 Bluetooth Pairing with a Sena Headset
or Helmet
11
3.3.2 Mesh Intercom On and Off
12
3.3.3 Mesh Intercom Reconnection
12
3.4 Using the Mesh in Open Mesh
13
3.4.1 Checking the Current Channel of the
+Mesh
13
3.4.2 Channel Setting (Default: channel 1) 13
3.5 Muting the Microphone (Default: Unmute) 13
3.6 Mesh Intercom Repeater Mode
14
4. TROUBLESHOOTING
15
4.1 Firmware Upgrade
15
4.2 Fault Reset
15
4.3 Factory Reset
15
QUICK REFERENCE
16
5
1. ABOUT THE +MESH
1.1 Product Details
Mesh Intercom Antenna
Multi-function Button Status LED
DC Power Charging & Firmware Upgrade Port
1.2 Package Contents
Main Unit
Mesh Intercom Antenna
Handlebar Mounting Kit
USB Power & Data Cable
6
Mounting Cradle
ABOUT THE +MESH
1.3 Installing the +Mesh
Install the +Mesh where the antenna is not blocked by the human body as much as possible. When the human body is blocking the antenna, the Mesh intercom signal strength will be weakened.
1.3.1 Using the Handlebar Mounting Kit 1. Place the handlebar mounting kit on the handle bar, wind
the rubber band around the handle bar, and hang it on the hook. 2. Attach the handlebar mounting kit on the back of the main unit along the guide rail until you hear a click.
1.3.2 Placing on the Mounting Cradle 1. Locate a proper surface on your motorcycle body, clean
the body surface location with a moistened towel, and allow to dry thoroughly. 2. Peel off the cover of the adhesive tape of the mounting cradle and attach the unit on the proper surface of your motorcycle. 3. Attach the mounting cradle on the back of the main unit along the guide rail until you hear a click.
Note: Make sure that the main unit sticks on your motorcycle body firmly. Maximum adhesion occurs after 24 hours.
7
2. BASIC OPERATION
2.1 Downloadable Sena Software
2.1.1 Sena +Mesh App
You can use the Sena +Mesh App without pairing your Smartphone to the +Mesh.
· Download
Android: Google Play Store > Sena +Mesh App iOS: App Store > Sena +Mesh App
2.1.2 Running the Sena +Mesh App 1. Turn on the product.
2. Press and hold the Multi-function Button for 5 seconds.
3. Launch the Sena +Mesh App on your Smartphone.
4. Scan the product in the app.
· When you launch the app, the product is automatically scanned.
· Tap the Scan icon ( ) to manually scan the product. 5. After scanning is complete, select the scanned product in
the app.
Note:
· If the product has not been scanned in the app, please update the product to the latest firmware.
· How to identify the scanned product in the app
You can identify the product by the
six-letter code on the label on the
back of your product.
XXXX XXXXXX
XXXX XXXXX
8
BASIC OPERATION
2.1.3 Sena Device Manager The Sena Device Manager allows you to upgrade the firmware from your PC or Apple computer. Download the Sena Device Manager from sena.com.
2.2 Powering On and Off
To power on the +Mesh, press and hold the Multi-function Button for 1 second. To power off the +Mesh, press and hold the Multi-function Button for 1 second.
2.3 Charging
The +Mesh can be charged using many common methods via the supplied USB power & data cable. The LED turns red while the headset is charging and turns blue when it is fully charged. Depending upon the charging method, the headset will be fully charged in about 2 hours.
2.4 Checking the Battery Level
When the +Mesh is powering on, the red LED flashes rapidly indicating the battery level.
4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30%
9
3. MESH INTERCOM
3.1 What is Mesh Intercom
Sena proposes using Mesh IntercomTM, which provides instant and effortless bike-to-bike communication without a pre-grouping process.
Mesh Intercom allows riders to connect and communicate with nearby users without the need to pair each headset together.
The working distance between each +Mesh in Mesh Intercom can be up to 800 meters (880 yards) in open terrain. In open terrain, the Mesh can be extended up to 3.2 km (1.9 miles) between a minimum of 6 users.
Open Mesh is an open group intercom function. Users can freely communicate with each other in the same Open Mesh channel.
It can connect with a virtually unlimited number of users in each channel.
C E
A F
B
D
B
D
B
B
D
A
C
Channel 1
E
A
C
Channel 2
10
A
C
Channel 9
MESH INTERCOM
3.2 SENA Products That Can Communicate with +Mesh via Mesh Intercom
· +Mesh · Mesh headset or helmet
Note: If +Mesh cannot communicate with Sena products via Mesh Intercom, please update to the latest firmware.
3.3 Using the Mesh
Before using Mesh Intercom, you will need to pair a compatible Sena headset or helmet for the first time. The Bluetooth pairing operation is only required once for each Sena headset or helmet. The +Mesh remains paired with the headset or helmet and automatically connects to the paired headset or helmet again when they are within range of each other.
3.3.1 Bluetooth Pairing with a Sena Headset or Helmet 1. Turn on the +Mesh and a headset that you would like to
pair with each other. 2. Press and hold the Multi-function Button of the +Mesh
for 5 seconds until red LED of the +Mesh start to flash rapidly. Enter into the Bluetooth intercom pairing mode of the headset (refer to the User's Manual for the headset you want to use). You do not need to press any buttons for pairing. 3. When the LED flashes green, the pairing is completed. You will hear "Mesh intercom on, Open Mesh, channel 1" from the connected corresponding headset.
11
MESH INTERCOM
3.3.2 Mesh Intercom On and Off 1. To start the Mesh Intercom, tap the Multi-function
Button. The LED flashes green and you will hear "Mesh intercom on, Open Mesh, channel 1" from the connected corresponding headset.
2. To terminate the Mesh Intercom, tap the Multi-function Button. You will hear "Mesh Intercom Off" from the connected corresponding headset.
Note: 1. The +Mesh supports only one headset or helmet for
pairing. 2. If the connected headset or helmet has HD Intercom
activated, the headset supports communication with HD quality sound. 3. If Audio Multitasking is enabled, the headset or helmet communicates in Normal Intercom mode. 4. If a headset or helmet that is connected to a +Mesh connects to another headset or helmet using Bluetooth intercom, the voice prompts from the +Mesh will be heard by all of the connected headsets. 5. If the headset or helmet has Audio Multitasking enabled or HD Intercom disabled, the intercom quality of Mesh Intercom will be reduced. 6. You can also start and terminate the Mesh Intercom by using the headset or helmet, but "Mesh Intercom On" and "Mesh Intercom Off" voice prompts will not be heard.
3.3.3 Mesh Intercom Reconnection If Bluetooth connection between the +Mesh and a headset is disconnected, tap the Multi-function Button to reconnect the two devices.
12
MESH INTERCOM
3.4 Using the Mesh in Open Mesh
When Mesh Intercom is enabled, the +Mesh will be in Open Mesh (default: channel 1) initially.
3.4.1 Checking the Current Channel of the +Mesh Triple-tap the Multi-function Button. Then you will hear a voice prompt, "Open Mesh, Channel #" through the paired headset speakers.
3.4.2 Channel Setting (Default: channel 1) If the Open Mesh communication experiences interference because other groups are also using channel 1 (default), change the channel. You can select from channels 1 to 9. · You can only change the channel through the Sena
+Mesh App.
3.5 Muting the Microphone (Default: Unmute)
1. To mute the microphone, double tap the Multi-function Button. The purple LED will flash and you will hear a voice prompt, "Mic off."
2. To unmute the microphone, double tap the Multifunction Button. The purple LED will flash twice and you will hear a voice prompt, "Mic on."
13
MESH INTERCOM
Note: 1. The mute and unmute function only works if Mesh
Intercom is on. 2. After turning off your +Mesh or turning off the Mesh
Intercom, the Mute setting will return to default (Unmute). 3. The mute and unmute function does not work in Mesh Intercom Repeater Mode.
3.6 Mesh Intercom Repeater Mode
The +Mesh can be used as a Mesh Intercom Repeater without Bluetooth pairing with a Bluetooth headet. 1. Triple tap the Multi-function Button during the Bluetooth
pairing. (Bluetooth Pairing, referring to section 3.3.1 on page 11.) 2. The green LED will flash 3 times and the +Mesh will operate in Mesh Intercom Repeater Mode. · In Mesh Intercom Repeater Mode, Mesh Intercom
will start automatically when the power is on.
Note: · In Mesh Intercom Repeater Mode, only the following
features can be executed: Power on/off Factory Reset Change the channel through the Sena +Mesh App. · If you want to pair with the Bluetooth headset, execute Factory Reset and proceed with Bluetooth pairing.
14
4. TROUBLESHOOTING
4.1 Firmware Upgrade
The +Mesh supports firmware upgrades. You can update the firmware using the Sena Device Manager.
4.2 Fault Reset
When the +Mesh is not working properly or is in faulty status for any reason, you may reset by pushing the Pin-hole Reset Button at the back of the main unit.
4.3 Factory Reset
If you want to restore the +Mesh to factory default settings, use the Factory Reset. Press and hold the Multi-funtion Button for 11 seconds until the LED flashes white, the +Mesh automatically restores the default settings and turns off.
15
QUICK REFERENCE
Type Operation
Button Command
Basic Function
Power on/off
Press and hold the Multi-function Button for 1 second
Bluetooth Pairing
Press and hold the Multi-function Button for 5 seconds
Mesh Intercom
on/off
Tap the Multi-function Button
Mesh IntercomTM
Mute/ Unmute
Mic
Double tap the Multi-function Button
Check the channel
Triple-tap the Multi-function Button
Repeater Triple tap the Multi-function Button Mode during the Bluetooth pairing
Factory Reset
Press and hold the Multi-function Button for 11 seconds
2.4.2_EN_May2024
16
Copyright 2024 Sena Technologies Co., Ltd.
All rights reserved.
© 19982024 Sena Technologies Co., Ltd. All rights reserved.
Sena Technologies Co., Ltd. reserves the right to make any changes and improvements to its product without providing prior notice.
SenaTM is a trademark of Sena Technologies Co., Ltd. or its subsidiaries in the USA and other countries. SF1TM, SF2TM, SF4TM, SFRTM, SRLTM, SRL2TM, SRL3TM, SRL-EXTTM, SRL-MeshTM, MomentumTM, Momentum INCTM, Momentum LiteTM, Momentum ProTM, Momentum INC ProTM, Momentum EVOTM, CavalryTM, Latitude SRTM, Latitude SXTM, Latitude S1TM, 30KTM, 33iTM, 50STM, 50RTM, 50CTM, 5STM, 5RTM, 5R LITETM, 20S EVOTM, 20STM, 10STM, 10CTM, 10C PROTM, ProRide EVOTM, 10C EVOTM, 10UTM, 10UpadTM, 10RTM, ACS10TM, ACS-RAMTM, B10TM, C1TM, C10TM, C20TM,CASTTM, 3STM, 3S PLUSTM, SMH5TM, SMH5-FMTM, SMH5 MultiComTM, SMH10TM, SMH10RTM, SPH10TM, SPH10H-FMTM, SavageTM, Prism Tube WiFiTM, PrismTM, Bluetooth Audio Pack for GoPro®, IMPULSETM, FURYTM, R1TM, R1 EVOTM, R1 EVO CSTM, R2TM, R2 EVOTM, R2XTM, M1TM, M1 EVOTM, S1TM, RUMBATM, RC1TM, RC3TM, RC4TM, STRYKERTM, Handlebar RemoteTM, Wristband RemoteTM, PowerPro MountTM, PowerbankTM, FreeWireTM, WiFi Docking StationTM, WiFi Sync CableTM, WiFi AdapterTM, +meshTM, +Mesh UniversalTM, MeshPort BlueTM, MeshPort RedTM, MeshPort BlackTM, EconoTM, OUTLANDER MTM, OUTRUSHTM, OUTRUSH RTM, OUTSTARTM, OUTSTAR STM, OUTFORCETM, OUTRIDETM, OUTRUSH MTM, EcoComTM, Parani A10TM, Parani A20TM, Parani M10TM, piTM, SnowtalkTM, Snowtalk2TM, SR10TM, SR10iTM, SM10TM, SPIDER RT1TM, SPIDER ST1TM, X1TM, X1 ProTM, X1STM, EXPANDTM, EXPAND BOOMTM, EXPAND MESHTM, Bluetooth Mic & IntercomTM, TufftalkTM, Tufftalk LiteTM, Tufftalk MTM, NAUTITALK BosunTM, NAUTITALK N2RTM are trademarks of Sena Technologies Co., Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Sena.
GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies Co., Ltd. ("Sena") is not affiliated with Woodman Labs, Inc. The Sena Bluetooth Pack for GoPro® is an aftermarket accessory specially designed and manufactured by Sena Technologies Co., Ltd. for the GoPro® Hero3 and Hero4 allowing for Bluetooth capabilities.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone® and iPod® touch are registered trademarks of Apple Inc.
Address: 152 Technology Drive Irvine, CA 92618