Govee User Manual

Model: H5151, H5100

Smart Thermo-Hygrometer

At a Glance

The device consists of a Thermo-Hygrometer and a Wi-Fi Gateway.

Thermo-Hygrometer Components:

Wi-Fi Gateway Components:

Device Components (Thermo-Hygrometer)

The Thermo-Hygrometer has the following parts:

LED Indicator Status Guides (For H5151 Wi-Fi Gateway Only)

Working StatusIndicator Status
The Wi-Fi gateway is powered on for the first time.Slowly flashes red and blue
Searching and connecting to Wi-FiQuickly flashes blue
Wi-Fi ConnectedSolid Blue
Wi-Fi Connection ErrorSolid Red

Installing Your Device (Thermo-Hygrometer)

  1. Pull out the battery insulator tab from the Thermo-Hygrometer.
  2. The attached sticker can be used to label or distinguish the equipment (optional).
  3. Install the lanyard (optional).

Device Installation Steps

  1. Open the back cover.
  2. Put the lanyard through the lanyard hole.
  3. Close the back cover.

Pairing with Govee Home App

1. Downloading the Govee Home App

Download the Govee Home app from the App Store (for iOS devices) or Google Play (for Android devices).

[Download on the App Store]

[Get it on Google Play]

2. Add the Sensor (model “H5100”)

  1. Turn on Bluetooth on your phone and place the thermo-hygrometer and your phone close to each other. Ensure Location Services/GPS is turned on for Android users.
  2. Open Govee Home, tap the '+' icon at the top right corner, and select "H5100".
  3. Follow the in-app instructions to complete pairing.
  4. Repeat the steps above to add other thermo-hygrometers.
  5. If pairing fails, check the above steps and try again.

3. Add the Wi-Fi Gateway (model “H5151”)

Note: Ensure your 2.4GHz Wi-Fi network is functioning properly before pairing the Wi-Fi Gateway to the network.

  1. Turn on Bluetooth on your phone and place the Wi-Fi Gateway and your phone close to each other. Ensure Location Services/GPS is turned on for Android users.
  2. Open Govee Home, tap the '+' icon at the top right corner, and select "H5151".
  3. Follow the in-app instructions to complete pairing.
  4. The Wi-Fi Gateway icon will appear in the top left corner on the "My Device" page when pairing is completed.
  5. If pairing fails, check the above steps and try again.

4. Pairing Sensors with Wi-Fi Gateway

  1. Tap the 'Devices' icon (represented by a grid or list symbol) on the upper left corner.
  2. Tap on your gateway.
  3. Tap the '+' icon to add a sensor and the '✓' icon to save.
  4. Pairing is successful when the Bluetooth [Bluetooth symbol] and Wi-Fi [Wi-Fi symbol] icons appear.

The device display will show current Temperature and Relative Humidity readings.

What You Get

ItemQuantity
Wi-Fi Gateway1
Thermo-Hygrometers3
AAA Batteries (pre-installed)3
Lanyards3
Label with serial numbers1
User Manual1
Service Card1

Specifications

Thermo-Hygrometers

AccuracyTemp: ±0.54°F/±0.3°C
Humidity: ±3%
Operating Temp-4°F to 140°F (-20°C to 60°C)
Operating Humidity0 to 99%

Wi-Fi Gateway

Input100-240V ~ 50/60Hz
Wi-Fi Frequency2.4GHz
Max Amount of Connected Thermo-Hygrometers10

Troubleshooting

Warning

Customer Service

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Responsible Party Information

Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact Information: https://www.govee.com/support

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.

Govee is a trademark of Shenzhen Intellirocks Tech. Co., Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech. Co., Ltd. All Rights Reserved.

Additional Information

For FAQs and more information, please visit: www.govee.com

PDF preview unavailable. Download the PDF instead.

71AGwMSMTcL Adobe PDF library 15.00 Adobe Illustrator 24.1 (Windows)

Related Documents

PreviewGovee H5151, H5100 Smart Thermo-Hygrometer User Manual
Comprehensive user manual for the Govee H5151 and H5100 Smart Thermo-Hygrometers, detailing setup, specifications, and app pairing.
PreviewGovee H5151 H5100 Smart Thermo-Hygrometer User Manual
User manual for Govee Smart Thermo-Hygrometer models H5151 and H5100, covering product overview, setup, app pairing, specifications, troubleshooting, and customer support.
PreviewGovee Smart Thermo-Hygrometer H5151 H5100 User Manual
User manual for Govee Smart Thermo-Hygrometer models H5151 and H5100. Learn how to set up, pair with the Govee Home App, understand LED indicators, and troubleshoot common issues for accurate temperature and humidity monitoring.
PreviewGovee H5100 Smart Thermo-Hygrometer User Manual
This user manual provides comprehensive instructions for the Govee H5100 Smart Thermo-Hygrometer, covering device installation, app connection, and usage features like data export and alerts for temperature and humidity monitoring.
PreviewGoveeLife Smart Thermo-Hygrometer User Manual (Models H5151, H5110)
User manual for the GoveeLife Smart Thermo-Hygrometer with Wi-Fi Gateway, including setup, pairing, specifications, and troubleshooting for models H5151 and H5110.
PreviewGovee H5100 Smart Thermo-Hygrometer User Manual
Explore the Govee H5100 Smart Thermo-Hygrometer user manual. Learn to set up, connect, and use this device for accurate temperature and humidity monitoring via the Govee Home App.
PreviewGovee B5178 Smart Indoor Outdoor Thermo-Hygrometer User Manual
User manual for the Govee B5178, a smart indoor and outdoor thermo-hygrometer. Learn about its features, setup, specifications, and troubleshooting. Supports multiple languages.
PreviewGovee H5074 Smart Thermo-Hygrometer User Manual
User manual for the Govee H5074 Smart Thermo-Hygrometer. Learn about its features, specifications, installation, app connection, troubleshooting, and customer service.