Braun Cleaning Station User Manual

Important Safety Information

General Warnings

• Always use the provided Braun power supply (Type D-492-C).
• Do not alter or tamper with any part of the appliance or power supply.
• Keep the appliance and power supply dry.
• Do not use if the appliance or power supply is damaged.
• This appliance can be used by children aged 8 and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they are supervised or instructed on safe use and understand the hazards.
• Children must not play with the appliance.
• Cleaning and user maintenance must not be performed by children unless supervised.

Important Notes on Usage

• Ensure the cleaning station is placed on a flat, stable surface to prevent cleaning fluid leakage.
• Do not tilt, move suddenly, or transport the cleaning station with a cartridge installed, as fluid may spill.
• Do not place the station in mirror cabinets, or on polished or lacquered surfaces.
• The cleaning cartridge contains a highly flammable liquid; keep away from ignition sources.
• Avoid direct sunlight, cigarette smoke, and storage near radiators.
• Prevent cleaning fluid from entering eyes.
• Do not refill the cartridge; use only original Braun refill cartridges.
• The shaver must be dry and free from foam, gel, or soap residue before use.
• The cleaning cartridge contains ethanol or isopropanol which evaporates slowly after opening.
• Replace cartridges approximately every 8 weeks if not used daily for optimal cleaning.
• Dispose of used cartridges according to local hazardous waste regulations.
• Close openings with the new cartridge lid, as the used cartridge contains contaminated fluid.
• Use the appliance only for its intended purpose.
• The product contains batteries and/or recyclable electric waste. Dispose of responsibly at designated collection points.

Description of the Cleaning Station

• 1. Station-to-shaver contacts: Must align with the shaver's contacts.
• 2. Display:
  • Indicator for low level of cleaning fluid (replace cartridge when lit). ?
  • Status light ?
  • Indicator for automatic cleaning program selection (not on all models):
    • Short/economical cleaning
    • Normal cleaning
    • Intensive cleaning
• 3. Start button: Activates automatic cleaning.
• 4. Release button: For lifting the housing to change the cleaning cartridge.
• 5. Power socket: Connection for the power supply.
• 6. Cleaning cartridge (CCR): Contains the cleaning solution.
• 7. Power supply: (Not included).

Specifications & Manufacturer

Model: Type 5430

Power Input: 100-240 V~, 50-60 Hz, 7 W

Manufacturer: Braun GmbH, Frankfurter Strasse 145, 61476 Kronberg, Germany.

For shaver warnings, service, and warranty information, refer to the shaver's instructions.

Visual Descriptions

The document includes illustrations of the Braun Series 9 Pro and Series 8 shavers, indicating their respective type numbers (Type 5792/5793 for Series 9 Pro, Type 5794/5795 for Series 8).

Diagrams illustrate the components of the cleaning station: the station itself, the cleaning cartridge (CCR), and the power supply.

Step-by-step diagrams demonstrate:

• Connecting the power supply to the cleaning station.
• Cleaning the shaver: rinsing the shaver head under running water, and the station performing an automatic cleaning cycle.
• Replacing the cleaning cartridge: releasing the housing, removing the old cartridge, and inserting a new one.
• Using the cleaning station with the shaver, showing the shaver being placed into the station and the cleaning process initiating.

A diagram shows the shaver being used on a face.

Icons are used to indicate low cleaning fluid level (?), status light (?), and different cleaning program intensities.

Recycling symbols (♻️) are present for product disposal.

A warning symbol (⚠️) is used in various safety contexts.