HECATE G1000 II Gaming Speakers

What's in the box?

• Power cable
• USB audio cable
• 3.5mm audio cable
• Quick Start Guide

Power Connection and Input

Connect the power cable to the speaker and a power outlet.

Input: 5V ⎓ 1A

Caution: To prevent damage to the product or connected devices, do not use adapters or other equipment with output power exceeding 100 W (including 100 W) to power this product.

Audio Inputs

USB Audio Streaming Input

Press the [USB input button] to switch to the USB audio streaming input with prompt tone "didi". Connect to an audio device using the USB audio cable. The red indicator will remain on when connected.

AUX Input

Press the [AUX input button] to switch to AUX input with prompt tone "dididi". The green indicator will remain on when connected.

Bluetooth Connection

1. Press the [Bluetooth button] to switch to Bluetooth input with prompt tone "di". The blue indicator will blink. Select "HECATE G1000 II" from your device list to connect. The blue indicator will remain on when connected.
2. Double press the [Bluetooth button] to disconnect Bluetooth and clear paired devices.

Controls and Features

Notification

Toggle notifications on/off.

Volume Control

Use the [Volume control buttons] to adjust the volume.

Sound Effects

• Default (Music Mode): Purple light blinks.
• Gaming Mode: Red light blinks.
• Movie Mode: Blue light blinks.

Light Effects

Various light effect modes are available.

Reset

Press and hold the [Reset button] for 2 seconds to reset the device.

Compliance Information

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC statement: CAN ICES(B)/NMB (B).

Power Consumption Information

This equipment complies with European Commission Regulation (EU) 2023/826. Off: N/A. Standby (when all wireless connections are deactivated): xx W. Networked standby for the speaker: xx W.

EU Declaration

Frequency Band: 2402MHz - 2480MHz. RF Power Output: 13 dBm (EIRP). There is no restriction of use.

FCC ID / IC

FCC ID: Z9G-EDF288. IC: 10004A-EDF288.

RoHS Compliance

Restricted substances and their chemical symbols

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: [compliance symbol] indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The "-" indicates that the restricted substance corresponds to the exemption.