AC Infinity
Instruction Manual for AC INFINITY models including: AC-NEG16 Ionbeam Green, AC-NEG16, Ionbeam Green, Green
AC Infinity IONBEAM Green LED Work Light Emergency Exit & Plant-Safe Lights Garden Care
AC Infinity Ionbeam Green LED Work Light | Dimming Timer Controller | 16 Inch - Aquaponics WA | Hydroponic Xpress
File Info : application/pdf, 24 Pages, 445.66KB
DocumentDocumentIONBEAM GREEN 1 WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don't hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information. EMAIL support@acinfinity.com WEB www.acinfinity.com LOCATION Los Angeles, CA 3 MANUAL CODE NEG2402X1 PRODUCT IONBEAM GREEN MODEL AC-NEG16 UPC-A 819137024380 4 MANUAL INDEX Manual Index ................................................................................. Page 5 Product Warning ............................................................................ Page 6 Key Features ................................................................................. Page 7 Product Contents ........................................................................... Page 8 Installation ..................................................................................... Page 9 Controller Mounting ....................................................................... Page 14 Starter Guide ................................................................................. Page 15 UISTM Platform ............................................................................... Page 16 Connecting to UISTM ...................................................................... Page 17 Programming ................................................................................. Page 18 Other AC Infinity Products ............................................................. Page 19 Warranty ........................................................................................ Page 20 5 PRODUCT WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Ensure your power source conforms to the electrical requirements of this product. 2. Read all instructions before installing and using this product. 3. Be careful not to damage or cut the wire insulation (covering) during the installation. Do not permit wires to come in contact with any sharp edges. 4. If you are unfamiliar or have doubts about performing this product's installation, seek the services of a qualified, trained, and licensed professional. Inappropriate installation will void this product's warranty. 5. This product must not be used in potentially hazardous locations such as flammable, explosive, chemical-laden or wet atmospheres. 6. Do not cover power cords with rugs or other fabric materials. 7. Safety precautions should be exercised during the installation, operation, and maintenance of this product. 8. Do not block or tamper with this product in any manner while it is in operation as it may cause electric shock, fire, or damage to this product. 9. Do not depend on the on/off programming as the sole means of shutting power from this product. Unplug the power cord before installing, servicing, or moving this product. 10. Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped, or is damaged in any manner. 11. Avoid staring directly at any lighting fixture for extended periods of time. 6 KEY FEATURES PLANT-GENTLE Spectrum maintains dark period integrity by providing lighting that will not impact your plant's grow cycle. ENHANCED SPECTRUM Supports existing blue and red LED grow lights to effectively improve overall lighting quality. GREATER FLEXIBILITY Optional diffuser evens light distribution and increases coverage area. Easily detach for supplemental lighting. VERSATILE MOUNTING Cold-rolled steel bar with matte black powder coating provides sturdy base for placement on any grow tent. ADJUSTABLE DIMMING 4 light intensity levels provide increased versatility to support work in grow tents and larger grow rooms. AUTO-OFF FUNCTIONALITY Smart programming includes automatic shut-off functionality as well as UIS compatible for access to more automations. 7 PRODUCT CONTENTS LIGHT BAR (x1) LIGHT DIFFUSER (x1) MOUNTING BAR (x1) LIGHT CONTROLLER (x1) POWER ADAPTER (x1) BAR EXTENSION CORD (M-F) (x2) UIS EXTENSION CORD (M-M) (x1) WOOD SCREWS (WALL MOUNT) (x4) HOOK AND LOOP CABLE TIES (x2) WIRE MOUNT (x2) 8 INSTALLATION LIGHT BAR CHAIN ASSEMBLY STEP 1 Connect the light bar's female port to the light controller's male connector. STEP 2 Connect the light controller to the power adapter. EXTENDING THE CHAIN You may connect the included bar extension cords in between any link in this light bar chain to lengthen it. Secure all connections using the twist-on pieces. 1 DIFFUSER You may snap on the diffuser for a softer and more even light distribution. 2 F M 9 INSTALLATION LIGHT BAR MOUNTING POLE MOUNTING Magnetically mount your light bar directly on your grow tent steel pole. You may also use the included hook and loop cable ties around your light bar and mounting bar to adjust the lighting angle and for extra security. CANVAS MOUNTING Magnetically mount your light bar to the wall or ceiling of your grow tent. Set the included mounting bar on the outer side of your tent. Set your light bar at the exact spots on the inner side. Once mounted, you can move the light bar and mounting bar connection along your grow tent surface as needed. Test that the magnetic connection through the canvas is secure before use. 10 INSTALLATION LIGHT BAR MOUNTING STEP 1 -- WALL MOUNTING Make sure that your mounting area is free from obstruction. Use a mounting bar to mark your drilling holes with the logo facing the wall. STEP 2 -- WALL MOUNTING Drill holes into the marked locations. 11 INSTALLATION LIGHT BAR MOUNTING STEP 3 -- WALL MOUNTING If you are mounting onto anything other than a wood support or stud, insert the included four wall anchors into the drilled mounting holes. You may need to use a hammer to secure them through the holes. STEP 4 -- WALL MOUNTING Align the mounting bar holes with the wall anchors, making sure the logo faces the wall. Screw or drill in the wood screws to secure the mounting bar. 12 INSTALLATION LIGHT BAR MOUNTING STEP 5 -- WALL MOUNTING Set the light bar magnet ends onto the mounting bar. POWERING THE LIGHT Plug the power adapter into a wall outlet. 13 CONTROLLER MOUNTING MAGNET MOUNTING Magnetically mount the light controller onto any steel surface. STEP 1 -- WALL MOUNTING Locate a spot free of obstruction and secure the anchor into your wall. Twist the wood screw into the anchors. STEP 2 -- WALL MOUNTING Use the mounting hole located on the back of the controller for wall mount. 14 STARTER GUIDE LIGHT INTENSITY Keep your light intensity under 10 nanomoles to best preserve your plant's night cycle during its flowering stage. At this lighting level, it should be dim enough to where you can't read a book, while still maintaining visibility in your grow space. GROW LIGHT PLACEMENT Install your light bar at the furthest point from your plant so that it faces the grow tent wall. Set your light bar to its lowest setting using the controller. If greater lighting is required, adjust your light bar's intensity level and/or move it closer to your plant. 15 UISTM PLATFORM The UISTM platform enables you to connect a single central controller with several grow devices simultaneously. By creating this fully integrated system, you can power and program all your devices together or separately for optimized grow tent management. Your grow system can be regulated using your controller hub or remotely on the AC Infinity app (paired with compatible controllers), where you will have access to automation programming and climate data. You can also connect your favorite grow light and outlet device to integrate them into the UIS platform using our RJ11/12 adapter and control plug module. Central controller and grow devices will be sold separately and may still be in development at the time of your purchase of this product. 16 CONNECTING TO UISTM IONBEAM LED grow lights can connect with select smart controllers as part of an integrated system using the included UIS extension cord. CONNECTING TO UIS CONTROLLERS Use the included UIS M-M extension cord to connect your light bar(s) to your selected UIS controller via the light controller's side port. Your selected UIS controller will override all of the light controller's onboard settings when connected in this manner. 17 PROGRAMMING 1. LIGHTING Pressing the light button will increase the light intensity level in 25% increments (25% - 100%), displayed with white LED indicators. Pressing this button at 100% intensity will cycle to 0%. Holding any button will shut off your light bar and the timer. Pressing any button when your light bar is off will turn the light and the timer back on at their previous settings. Setting the light intensity without setting a timer will keep the light on indefinitely. 2. TIMER Pressing the clock button will set the timer in 5-minute increments (5MIN. - 20MIN.), displayed with orange LED indicators. Lighting will be active for the amount of time set here (ex. 15MIN. for a 15 minute timer). It will deactivate after the indicated time has passed. Pressing any button when your light bar is off will turn the light and timer back on at their previous settings. Pressing the clock button at the 20MIN. setting will deactivate the timer. 18 3 2 1 3. UIS CONNECTION Refer to the programming section of your selected UIS controller for programming instructions. AC INFINITY PRODUCTS Pruning Shears Stainless-steel gardening shears designed to effectively trim and fine-tune small plants to support healthy growth. The razor sharp blades are coated in non-stick Titanium to prevent resin-buildup through heavy use, and are controlled via spring-loaded handles specially constructed for maximum comfort. Drying Racks A polyester mesh netting rack designed to dry and cure plant materials within a multi-tiered hanger system. The steel wireframe build can support heavier capacities within its zippered chambers while remaining collapsible for easy storage when not in use. Bowl Trimmers A manually operated trimming machine designed to quickly and efficiently process high volumes of finely groomed herbs, buds and flowers. Features straight blades for wet trimming and serrated blades for dry trimming, controlled by an easy-to-use removable hand crank and collected in a non-stick bowl. Discover the latest innovations in environmental controls at acinfinity.com 19 WARRANTY This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues. The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships. The program covers products that have become defective, malfunctioned, or expressively if the product becomes unusable. The warranty program goes into effect on the date of purchase. The program will expire two years from the date of purchase. If your product becomes defective during that period, AC Infinity will replace your product with a new one or issue you a full refund. The warranty program does not cover abuse or misuse. This includes physical damage, submersion of the product in water, incorrect Installation such as wrong voltage input, and misuse for any reason other than intended purposes. AC Infinity is not responsible for consequential loss or incidental damages of any nature caused by the product. We will not warrant damage from normal wear such as scratches and dings. Contact our dealers department at dealers@acinfinity.com or (626) 838-4656 for more information about our dealers and distributors program. Contact our customer service department at support@acinfinity.com or 626-923-6399 for product and warranty assistance. Our business hours are Monday through Friday, 9:00 am to 5:00 pm PST. If you have any issues with this product, contact us and we'll happily resolve your problem or issue a full refund! 20 COPYRIGHT © 2024 AC INFINITY INC. ALL RIGHTS RESERVED No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc. www.acinfinity.com